Add package deploy apply stage

README.md

@@ -56,6 +56,7 @@ python3 -m ampg --config gateway.toml dns plan --free-domain-hints
 python3 -m ampg --config gateway.toml build
 python3 -m ampg --config gateway.toml doctor
 python3 -m ampg --config gateway.toml install-plan --profile vps-full --write-artifacts
+python3 -m ampg --config gateway.toml deploy apply --stage packages --dry-run --profile vps-full
 python3 -m ampg --config gateway.toml approvals list --profile vps-full
 python3 -m ampg --config gateway.toml approvals approve --profile vps-full --all
 python3 -m ampg --config gateway.toml apply --dry-run --profile vps-full
@@ -70,11 +71,12 @@ python3 -m ampg --config gateway.toml deploy apply --stage health --dry-run --pr
 transports left as one-line toggles. `deploy plan` condenses the lower-level checks into
 clear next steps. `dns plan` covers static DNS, Dynamic DNS, and behind-router
 reachability hints. `apply --dry-run` prints the activation sequence and a preflight
-verdict without changing services. `deploy apply --stage state` copies approved
-managed-daemon config into AMPG-owned state. `deploy apply --stage supervisor` installs
-approved supervisor files after state exists. `deploy apply --stage start` starts
-AMPG-owned services after state and supervisor files are present. `deploy apply --stage
-addresses` captures daemon-written public addresses into the address registry.
+verdict without changing services. `deploy apply --stage packages` installs selected
+managed-daemon packages using structured platform commands. `deploy apply --stage state`
+copies approved managed-daemon config into AMPG-owned state. `deploy apply --stage
+supervisor` installs approved supervisor files after state exists. `deploy apply --stage
+start` starts AMPG-owned services after state and supervisor files are present. `deploy
+apply --stage addresses` captures daemon-written public addresses into the address registry.
 `deploy apply --stage health` verifies published fixture URLs through the selected
 transport.
 
@@ -140,6 +142,8 @@ python3 -m ampg --config examples/wownero.gateway.toml apply --dry-run --protoco
 python3 -m ampg --config examples/wownero.gateway.toml apply --dry-run --write-artifacts
 python3 -m ampg --config examples/wownero.gateway.toml approvals list --profile mobile-i2p
 python3 -m ampg --config examples/wownero.gateway.toml approvals approve --profile mobile-i2p --all
+python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage packages --dry-run --profile mobile-i2p
+python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage packages --profile mobile-i2p --yes
 python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage state --dry-run --profile mobile-i2p
 python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage state --profile mobile-i2p --yes
 python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage supervisor --dry-run --profile mobile-i2p
@@ -198,6 +202,11 @@ would be copied into managed state and the supervisor services that would be reg
 or started. The preflight gate reports `blocked`, `review`, or `ready` across activation
 steps, managed-state copies, and supervisor actions.
 
+`deploy apply --stage packages --dry-run` shows managed-daemon packages that can be
+installed automatically for the selected platform. The live form requires `--yes`, runs
+only allowlisted package-manager commands, and leaves config, services, keys, and
+addresses unchanged. Adopted and external daemons are skipped.
+
 `deploy apply --stage state --dry-run` shows approved managed-daemon artifacts that are
 ready to copy into `gateway.state_dir`. The live form requires `--yes`; it creates only
 AMPG-owned state directories and copies approved artifact contents. It does not install
@@ -247,6 +256,7 @@ Explicit `--protocol` and `--platform` flags override the profile when present.
 - [ ] Run `ampg health-plan`; review post-start transport checks.
 - [ ] Run `ampg approvals approve --all` after reviewing generated artifacts.
 - [ ] Run `ampg apply --dry-run`; review the activation sequence and preflight gate.
+- [ ] Run `ampg deploy apply --stage packages --dry-run`; confirm package-manager commands.
 - [ ] Run `ampg deploy apply --stage state --dry-run`; confirm approved state copies.
 - [ ] Run `ampg deploy apply --stage supervisor --dry-run`; confirm approved service files.
 - [ ] Run `ampg deploy apply --stage start --dry-run`; confirm service-manager commands.

ampg/apply.py

@@ -16,8 +16,10 @@ from .addresses import (
 from .config import GatewayConfig
 from .health import HealthCheck, health_plan
 from .install_plan import (
+    InstallPackageAction,
     InstallStateCopy,
     InstallSupervisorAction,
+    install_package_actions,
     install_state_copies,
     install_supervisor_actions,
 )
@@ -61,6 +63,19 @@ class CommandRunResult:
     stderr: str = ""
 
 
+@dataclass(frozen=True)
+class PackageApplyResult:
+    site_id: str
+    protocol: str
+    platform: str
+    package: str
+    status: str
+    mode: str
+    command: tuple[str, ...]
+    return_code: int | None
+    message: str
+
+
 @dataclass(frozen=True)
 class StartApplyResult:
     site_id: str
@@ -106,6 +121,62 @@ class HealthApplyResult:
 CommandRunner = Callable[[tuple[str, ...]], CommandRunResult]
 
 
+def apply_packages(
+    config: GatewayConfig,
+    *,
+    dry_run: bool,
+    platform_provider: PlatformProvider | None = None,
+    daemon_probe: DaemonProbeFunc | None = None,
+    command_runner: CommandRunner | None = None,
+) -> list[PackageApplyResult]:
+    provider = platform_provider or detect_platform()
+    actions = install_package_actions(
+        config,
+        platform_provider=provider,
+        daemon_probe=daemon_probe,
+    )
+    runner = command_runner or _run_command
+    results: list[PackageApplyResult] = []
+    for action in actions:
+        validation = _validate_package_action(action, dry_run=dry_run)
+        if validation.status in {"blocked", "skipped"}:
+            results.append(validation)
+            continue
+        if dry_run:
+            results.append(
+                _package_result(
+                    action,
+                    status="planned",
+                    mode="dry-run",
+                    return_code=None,
+                    message="would install managed daemon package",
+                )
+            )
+            continue
+        run = runner(action.command)
+        if run.return_code != 0:
+            results.append(
+                _package_result(
+                    action,
+                    status="blocked",
+                    mode="live",
+                    return_code=run.return_code,
+                    message=_command_failure_message(run, label="package install command"),
+                )
+            )
+            continue
+        results.append(
+            _package_result(
+                action,
+                status="installed",
+                mode="live",
+                return_code=run.return_code,
+                message="installed managed daemon package",
+            )
+        )
+    return results
+
+
 def apply_state(
     config: GatewayConfig,
     *,
@@ -268,7 +339,7 @@ def apply_start(
                     status="blocked",
                     mode="live",
                     return_code=run.return_code,
-                    message=_command_failure_message(run),
+                    message=_command_failure_message(run, label="start command"),
                 )
             )
             continue
@@ -333,7 +404,7 @@ def apply_health(
                     status="blocked",
                     mode="live",
                     return_code=run.return_code,
-                    message=_command_failure_message(run),
+                    message=_command_failure_message(run, label="health check command"),
                 )
             )
             continue
@@ -350,6 +421,61 @@ def apply_health(
     return results
 
 
+def _validate_package_action(
+    action: InstallPackageAction,
+    *,
+    dry_run: bool,
+) -> PackageApplyResult:
+    mode = "dry-run" if dry_run else "live"
+    if action.status == "ready":
+        return _package_result(
+            action,
+            status="skipped",
+            mode=mode,
+            return_code=None,
+            message=action.message,
+        )
+    if action.status != "planned":
+        return _package_result(
+            action,
+            status="blocked",
+            mode=mode,
+            return_code=None,
+            message=action.message,
+        )
+    if not _valid_package_name(action.package):
+        return _package_result(
+            action,
+            status="blocked",
+            mode=mode,
+            return_code=None,
+            message=f"invalid package name: {action.package}",
+        )
+    if not action.command:
+        return _package_result(
+            action,
+            status="blocked",
+            mode=mode,
+            return_code=None,
+            message="selected platform does not have an automatic package install command",
+        )
+    if not _allowed_package_command(action):
+        return _package_result(
+            action,
+            status="blocked",
+            mode=mode,
+            return_code=None,
+            message="package install command is not allowlisted",
+        )
+    return _package_result(
+        action,
+        status="ready",
+        mode=mode,
+        return_code=None,
+        message="package install command passed safety checks",
+    )
+
+
 def _validate_state_copy(
     config: GatewayConfig,
     copy: InstallStateCopy,
@@ -614,6 +740,27 @@ def _address_result(
     )
 
 
+def _package_result(
+    action: InstallPackageAction,
+    *,
+    status: str,
+    mode: str,
+    return_code: int | None,
+    message: str,
+) -> PackageApplyResult:
+    return PackageApplyResult(
+        site_id=action.site_id,
+        protocol=action.protocol,
+        platform=action.platform,
+        package=action.package,
+        status=status,
+        mode=mode,
+        command=action.command,
+        return_code=return_code,
+        message=message,
+    )
+
+
 def _health_result(
     check: HealthCheck,
     *,
@@ -758,6 +905,23 @@ def _valid_service_name(service: str) -> bool:
     return all(char.isalnum() or char in {"-", "_", "."} for char in service)
 
 
+def _valid_package_name(package: str) -> bool:
+    if not package or package == "-":
+        return False
+    return all(char.isalnum() or char in {"-", "_", ".", "+"} for char in package)
+
+
+def _allowed_package_command(action: InstallPackageAction) -> bool:
+    package = action.package
+    if action.platform == "android-termux":
+        return action.command == ("pkg", "install", package)
+    if action.platform == "linux-systemd":
+        return action.command == ("sudo", "apt", "install", package)
+    if action.platform == "macos-launchd":
+        return action.command == ("brew", "install", package)
+    return False
+
+
 def _chmod_supervisor_target(provider: PlatformProvider, target: Path) -> None:
     if provider.name not in {"android-termux", "linux-user"}:
         return
@@ -790,11 +954,11 @@ def _run_command(command: tuple[str, ...]) -> CommandRunResult:
     )
 
 
-def _command_failure_message(run: CommandRunResult) -> str:
+def _command_failure_message(run: CommandRunResult, *, label: str = "command") -> str:
     detail = run.stderr or run.stdout
     if detail:
-        return f"start command failed: {detail}"
-    return "start command failed"
+        return f"{label} failed: {detail}"
+    return f"{label} failed"
 
 
 def format_command(command: tuple[str, ...]) -> str:

ampg/cli.py

@@ -24,11 +24,13 @@ from .addresses import (
 from .apply import (
     AddressApplyResult,
     HealthApplyResult,
+    PackageApplyResult,
     StateApplyResult,
     StartApplyResult,
     SupervisorApplyResult,
     apply_addresses,
     apply_health,
+    apply_packages,
     apply_state,
     apply_start,
     apply_supervisor,
@@ -164,7 +166,7 @@ def main(argv: list[str] | None = None) -> int:
     _add_target_selection(deploy_apply_parser)
     deploy_apply_parser.add_argument(
         "--stage",
-        choices=("state", "supervisor", "start", "addresses", "health"),
+        choices=("packages", "state", "supervisor", "start", "addresses", "health"),
         required=True,
         help="Deployment stage to apply.",
     )
@@ -583,6 +585,29 @@ def _cmd_deploy(config, args) -> int:
             )
             return 1
         platform_provider = _platform_override(config, args)
+        if args.stage == "packages":
+            results = apply_packages(
+                config,
+                dry_run=args.dry_run,
+                platform_provider=platform_provider,
+            )
+            for result in results:
+                _print_package_apply_result(result)
+            blocked = [result for result in results if result.status == "blocked"]
+            installed = [result for result in results if result.status == "installed"]
+            planned = [result for result in results if result.status == "planned"]
+            skipped = [result for result in results if result.status == "skipped"]
+            print(
+                "AMPG_DEPLOY_APPLY_SUMMARY "
+                f"stage=packages "
+                f"mode={'dry-run' if args.dry_run else 'live'} "
+                f"results={len(results)} "
+                f"planned={len(planned)} "
+                f"installed={len(installed)} "
+                f"skipped={len(skipped)} "
+                f"blocked={len(blocked)}"
+            )
+            return 1 if blocked else 0
         if args.stage == "state":
             results = apply_state(
                 config,
@@ -1171,6 +1196,22 @@ def _print_state_apply_result(result: StateApplyResult) -> None:
     )
 
 
+def _print_package_apply_result(result: PackageApplyResult) -> None:
+    return_code = "-" if result.return_code is None else str(result.return_code)
+    print(
+        "AMPG_DEPLOY_PACKAGE "
+        f"site={result.site_id} "
+        f"protocol={result.protocol} "
+        f"platform={result.platform} "
+        f"package=\"{_quote(result.package)}\" "
+        f"mode={result.mode} "
+        f"status={result.status} "
+        f"return_code={return_code} "
+        f"command=\"{_quote(format_command(result.command))}\" "
+        f"message=\"{_quote(result.message)}\""
+    )
+
+
 def _print_supervisor_apply_result(result: SupervisorApplyResult) -> None:
     print(
         "AMPG_DEPLOY_SUPERVISOR "

ampg/deploy.py

@@ -19,6 +19,7 @@ from .dns import dns_plan
 from .health import health_plan
 from .install_plan import (
     install_artifacts,
+    install_package_actions,
     install_plan,
     install_state_copies,
     install_supervisor_actions,
@@ -82,6 +83,12 @@ def deploy_plan(
             platform_provider=platform_provider,
             daemon_probe=daemon_probe,
         ),
+        _package_step(
+            config,
+            command_context,
+            platform_provider=platform_provider,
+            daemon_probe=daemon_probe,
+        ),
         _artifact_step(config, command_context, platform_provider=platform_provider),
         _apply_preflight_step(
             config,
@@ -230,6 +237,52 @@ def _daemon_step(
     )
 
 
+def _package_step(
+    config: GatewayConfig,
+    commands: _CommandContext,
+    *,
+    platform_provider: PlatformProvider | None,
+    daemon_probe: DaemonProbeFunc | None,
+) -> DeployStep:
+    actions = install_package_actions(
+        config,
+        platform_provider=platform_provider,
+        daemon_probe=daemon_probe,
+    )
+    if not actions:
+        return DeployStep("packages", "ready", "-", "no managed package installs are needed")
+    blocked = [action for action in actions if action.status == "blocked"]
+    planned = [action for action in actions if action.status == "planned"]
+    manual = [action for action in planned if not action.command]
+    if blocked:
+        return DeployStep(
+            "packages",
+            "blocked",
+            commands.command("install-plan", platform=True),
+            f"fix {len(blocked)} package planning blocker(s)",
+        )
+    if manual:
+        return DeployStep(
+            "packages",
+            "review",
+            commands.command("install-plan", platform=True),
+            f"install {len(manual)} package(s) with the local package manager",
+        )
+    if planned:
+        return DeployStep(
+            "packages",
+            "todo",
+            commands.command("deploy apply --stage packages --dry-run", platform=True),
+            f"install {len(planned)} managed daemon package(s)",
+        )
+    return DeployStep(
+        "packages",
+        "ready",
+        commands.command("deploy apply --stage packages --dry-run", platform=True),
+        "managed daemon packages are installed",
+    )
+
+
 def _artifact_step(
     config: GatewayConfig,
     commands: _CommandContext,

ampg/install_plan.py

@@ -66,6 +66,17 @@ class InstallSupervisorAction:
     message: str
 
 
+@dataclass(frozen=True)
+class InstallPackageAction:
+    site_id: str
+    protocol: str
+    platform: str
+    package: str
+    status: str
+    command: tuple[str, ...]
+    message: str
+
+
 def install_plan(
     config: GatewayConfig,
     *,
@@ -120,6 +131,47 @@ def install_artifacts(
     return artifacts
 
 
+def install_package_actions(
+    config: GatewayConfig,
+    *,
+    platform_provider: PlatformProvider | None = None,
+    daemon_probe: DaemonProbeFunc | None = None,
+) -> list[InstallPackageAction]:
+    provider = platform_provider or detect_platform()
+    steps = install_plan(
+        config,
+        platform_provider=provider,
+        daemon_probe=daemon_probe,
+    )
+    actions: list[InstallPackageAction] = []
+    for step in steps:
+        if step.stage == "package":
+            actions.append(
+                InstallPackageAction(
+                    site_id=step.site_id,
+                    protocol=step.protocol,
+                    platform=step.platform,
+                    package=step.target,
+                    status=step.status,
+                    command=package_install_command(provider, step.target),
+                    message=step.message,
+                )
+            )
+        elif step.status == "blocked":
+            actions.append(
+                InstallPackageAction(
+                    site_id=step.site_id,
+                    protocol=step.protocol,
+                    platform=step.platform,
+                    package=step.target,
+                    status="blocked",
+                    command=(),
+                    message=step.message,
+                )
+            )
+    return actions
+
+
 def write_install_artifacts(
     config: GatewayConfig,
     *,
@@ -513,13 +565,20 @@ def _package_name(provider: PlatformProvider, daemon: str) -> str:
     return daemon
 
 
-def _package_command(provider: PlatformProvider, package: str) -> str:
+def package_install_command(provider: PlatformProvider, package: str) -> tuple[str, ...]:
     if provider.name == "android-termux":
-        return f"pkg install {package}"
+        return ("pkg", "install", package)
     if provider.name == "linux-systemd":
-        return f"sudo apt install {package}"
+        return ("sudo", "apt", "install", package)
     if provider.name == "macos-launchd":
-        return f"brew install {package}"
+        return ("brew", "install", package)
+    return ()
+
+
+def _package_command(provider: PlatformProvider, package: str) -> str:
+    command = package_install_command(provider, package)
+    if command:
+        return shlex.join(command)
     if provider.name == "linux-user":
         return f"install {package} with the user package manager"
     return "-"

docs/architecture.md

@@ -131,6 +131,10 @@ managed state and planned supervisor start/reload actions. The command emits an
 Blocked or unapproved preflight items stop mutation before any live apply path can touch
 services.
 
+`ampg deploy apply --stage packages` is the narrow live stage for package installation.
+It runs only structured package-manager commands for selected managed daemons. Adopted
+or external daemons do not require package apply.
+
 `ampg deploy apply --stage state` is the narrow live stage for managed state. It reads
 the same approved artifact plan, refuses missing, stale, or unapproved inputs, and copies
 only approved generated daemon config into AMPG-owned state.
@@ -159,7 +163,7 @@ root.
 `ampg install-plan` translates managed daemon decisions into package, state, config,
 supervisor, and health-check steps. It does not install packages, create directories, or
 start services. The output is a reviewable bridge between daemon ownership decisions and
-future live apply support.
+the staged live apply commands.
 
 With `--write-artifacts`, install-plan writes managed config and supervisor files under
 the configured `plan_root`; those files are review artifacts, not installed service

docs/daemon-management.md

@@ -56,6 +56,8 @@ python3 -m ampg --config gateway.toml apply --dry-run --protocol i2p
 python3 -m ampg --config gateway.toml apply --dry-run --write-artifacts
 python3 -m ampg --config gateway.toml approvals list --profile mobile-i2p
 python3 -m ampg --config gateway.toml approvals approve --profile mobile-i2p --all
+python3 -m ampg --config gateway.toml deploy apply --stage packages --dry-run --profile mobile-i2p
+python3 -m ampg --config gateway.toml deploy apply --stage packages --profile mobile-i2p --yes
 python3 -m ampg --config gateway.toml deploy apply --stage state --dry-run --profile mobile-i2p
 python3 -m ampg --config gateway.toml deploy apply --stage state --profile mobile-i2p --yes
 python3 -m ampg --config gateway.toml deploy apply --stage supervisor --dry-run --profile mobile-i2p
@@ -70,8 +72,8 @@ python3 -m ampg --config gateway.toml doctor --platform android-termux
 ```
 
 `deploy plan` summarizes the current deployment in plain stages: source, build, DNS,
-doctor, daemons, artifacts, addresses, and apply preflight. It prints the next commands
-to run and does not change files or services.
+doctor, daemons, packages, artifacts, addresses, and apply preflight. It prints the next
+commands to run and does not change files or services.
 
 `dns plan` prints clearnet DNS records and reachability hints. Static mode plans A/AAAA
 and `www` records. Dynamic mode supports a Dynamic DNS hostname and warns when apex
@@ -99,6 +101,10 @@ Tor/I2P HTTP publishing, AMPG writes both transport-daemon artifacts and loopbac
 artifacts. The generated daemon configs store runtime state, identity keys, logs, and
 daemon-written addresses under `gateway.state_dir`.
 
+`deploy apply --stage packages` installs selected managed-daemon packages with
+structured, allowlisted platform commands. Adopted and external daemons are skipped.
+Platforms without an automatic package backend remain manual review items.
+
 `state-contract` prints the resolved managed-state paths for enabled protocols, including
 which paths are AMPG-owned, daemon-written, required, or sensitive.
 
@@ -127,30 +133,36 @@ reviewable config snippets to the configured plan root, then prints the copies f
 approved artifacts into `gateway.state_dir` and the supervisor services that would be
 registered or started. It still does not install or reload services.
 
-`deploy apply --stage state` is the first live apply stage. Dry-run mode prints
+`deploy apply --stage packages` is the first live apply stage. Dry-run mode prints
+`AMPG_DEPLOY_PACKAGE` rows. Live mode requires `--yes`, runs only structured
+package-manager commands for selected managed daemons, and reports installed, skipped, or
+blocked results. It does not write config, register services, start daemons, capture
+addresses, or run health checks.
+
+`deploy apply --stage state` is the second live apply stage. Dry-run mode prints
 `AMPG_DEPLOY_STATE` rows. Live mode requires `--yes`, refuses unapproved or stale
 artifacts, creates AMPG-owned state directories, and copies approved managed-daemon
 config into `gateway.state_dir`. It does not install packages, edit adopted daemon
 configs, start services, or delete identity material.
 
-`deploy apply --stage supervisor` is the second live apply stage. Dry-run mode prints
+`deploy apply --stage supervisor` is the third live apply stage. Dry-run mode prints
 `AMPG_DEPLOY_SUPERVISOR` rows. Live mode requires `--yes`, refuses unapproved or stale
 artifacts, requires the state stage to have copied managed config first, and writes
 AMPG-named service files for the selected platform. It does not install packages, start
 services, reload service managers, or delete service files.
 
-`deploy apply --stage start` is the third live apply stage. Dry-run mode prints
+`deploy apply --stage start` is the fourth live apply stage. Dry-run mode prints
 `AMPG_DEPLOY_START` rows with exact service-manager commands. Live mode requires `--yes`,
 requires both state and supervisor files to exist, and runs only structured platform
 commands for AMPG-named services. It does not install packages, rewrite config, remove
 files, capture addresses, or run health checks.
 
-`deploy apply --stage addresses` is the fourth live apply stage. Dry-run mode prints
+`deploy apply --stage addresses` is the fifth live apply stage. Dry-run mode prints
 `AMPG_DEPLOY_ADDRESS` rows for configured, skipped, missing, and capturable addresses.
 Live mode requires `--yes` and writes captured transport addresses under
 `gateway.state_dir`. It does not rewrite daemon config or run health checks.
 
-`deploy apply --stage health` is the fifth live apply stage. Dry-run mode prints
+`deploy apply --stage health` is the sixth live apply stage. Dry-run mode prints
 `AMPG_DEPLOY_HEALTH` rows with published fixture URLs and transport commands. Live mode
 requires `--yes`, runs those commands, and reports pass/fail. It does not change daemon
 config, service state, or address registries.
@@ -171,9 +183,11 @@ Platform providers describe how AMPG may supervise managed daemons:
 - `android-termux`: Termux-style user-space daemons for mobile/server experiments.
 - `unknown`: render and plan only; daemon management is disabled.
 
-Package commands in `install-plan` are review hints, not executed actions. Systemd hosts
-currently emit `apt`-style package hints, Termux emits `pkg`, macOS emits `brew`, and
-user-space Linux asks the operator to use the local user package manager.
+Package commands in `install-plan` are review hints. `deploy apply --stage packages` is
+the executable package stage for supported automatic backends: Systemd hosts use
+`sudo apt install`, Termux uses `pkg install`, and macOS uses `brew install`. User-space
+Linux asks the operator to use the local package manager until AMPG has a concrete
+backend for that environment.
 
 ## Adapter notes
 

docs/state-contract.md

@@ -1,6 +1,6 @@
 # State Contract
 
-> Status: draft | Updated 2026-07-06 | Applies to: managed daemon state
+> Status: draft | Updated 2026-07-07 | Applies to: managed daemon state
 
 AMPG keeps managed daemon state under `gateway.state_dir`. The state contract describes
 which files AMPG owns, which files daemons or adapters write, which paths may contain
@@ -48,6 +48,10 @@ for the services that would be registered or started. The accompanying
 `AMPG_APPLY_PREFLIGHT` verdict includes those rows so live apply can refuse mutation when
 state or supervisor inputs still need review.
 
+`deploy apply --stage packages` performs package installation only. It uses structured
+platform package-manager commands for selected managed daemons and does not write AMPG
+state, service files, generated config, or address registries.
+
 `deploy apply --stage state` performs the approved copy portion only. It requires
 `--yes` for live writes, refuses unapproved or stale artifacts, writes only under
 `gateway.state_dir`, and leaves supervisor file installation, daemon start, address

docs/wownero-integration.md

@@ -141,9 +141,9 @@ daemon_policy = "auto"
 - `ampg build` writes a fixture manifest that AMPB can check.
 - `ampg preview manifest` writes loopback fixture URLs that AMPB can check before live
   transport daemons are installed or adopted.
-- `ampg deploy apply --stage state`, `--stage supervisor`, `--stage start`,
-  `--stage addresses`, and `--stage health` stage Wownero transport publication without
-  mixing concerns.
+- `ampg deploy apply --stage packages`, `--stage state`, `--stage supervisor`,
+  `--stage start`, `--stage addresses`, and `--stage health` stage Wownero transport
+  publication without mixing concerns.
 - Tor output contains no `<script>` tags or inline event handlers.
 - Generated Gemini output has readable headings, paragraphs, and links.
 - Generated Micron output fits terminal-first browsing.
@@ -165,6 +165,7 @@ python3 -m ampg --config examples/wownero.gateway.toml preview manifest
 python3 -m ampg --config examples/wownero.gateway.toml install-plan --profile mobile-i2p --write-artifacts
 python3 -m ampg --config examples/wownero.gateway.toml approvals list --profile mobile-i2p
 python3 -m ampg --config examples/wownero.gateway.toml approvals approve --profile mobile-i2p --all
+python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage packages --dry-run --profile mobile-i2p
 python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage state --dry-run --profile mobile-i2p
 python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage supervisor --dry-run --profile mobile-i2p
 python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage start --dry-run --profile mobile-i2p
@@ -182,6 +183,7 @@ python3 -m ampg --config examples/i2p-only.gateway.toml build
 - [ ] Add Gemini conversion fixtures.
 - [ ] Add Reticulum/Micron conversion fixtures.
 - [ ] Enable I2P and Reticulum daemon management only after static outputs are stable.
+- [ ] Review package install commands for selected managed Wownero transports.
 - [ ] Start only AMPG-owned Wownero transport services after reviewed files are applied.
 - [ ] Capture Wownero transport addresses before published health checks.
 - [ ] Run published health checks through each selected transport.

tests/test_deploy_apply.py

@@ -8,6 +8,7 @@ from ampg.addresses import address_registry_path
 from ampg.apply import (
     CommandRunResult,
     apply_health,
+    apply_packages,
     apply_start,
     apply_state,
     apply_supervisor,
@@ -163,6 +164,94 @@ def _write_i2p_address_file(root: Path, value: str = "captureexample.b32.i2p") -
 
 
 class DeployApplyTest(unittest.TestCase):
+    def test_deploy_apply_packages_dry_run_plans_termux_installs(self):
+        with tempfile.TemporaryDirectory() as tmp:
+            root = Path(tmp).resolve()
+            config_path = _init_i2p_config(root)
+            config = load_config(config_path)
+
+            results = apply_packages(
+                config,
+                dry_run=True,
+                platform_provider=_termux_provider(root),
+                daemon_probe=_missing_probe,
+            )
+
+        self.assertTrue(all(result.status == "planned" for result in results))
+        self.assertIn(("pkg", "install", "i2pd"), [result.command for result in results])
+        self.assertIn(("pkg", "install", "nginx"), [result.command for result in results])
+
+    def test_deploy_apply_packages_live_invokes_runner(self):
+        with tempfile.TemporaryDirectory() as tmp:
+            root = Path(tmp).resolve()
+            config_path = _init_i2p_config(root)
+            config = load_config(config_path)
+            commands: list[tuple[str, ...]] = []
+
+            def runner(command: tuple[str, ...]) -> CommandRunResult:
+                commands.append(command)
+                return CommandRunResult(return_code=0)
+
+            results = apply_packages(
+                config,
+                dry_run=False,
+                platform_provider=_termux_provider(root),
+                daemon_probe=_missing_probe,
+                command_runner=runner,
+            )
+
+        self.assertTrue(all(result.status == "installed" for result in results))
+        self.assertIn(("pkg", "install", "i2pd"), commands)
+        self.assertIn(("pkg", "install", "nginx"), commands)
+
+    def test_deploy_apply_packages_blocks_manual_linux_user_install(self):
+        with tempfile.TemporaryDirectory() as tmp:
+            root = Path(tmp).resolve()
+            config_path = _init_i2p_config(root)
+            config = load_config(config_path)
+
+            results = apply_packages(
+                config,
+                dry_run=True,
+                platform_provider=_linux_user_provider(root),
+                daemon_probe=_missing_probe,
+            )
+
+        self.assertTrue(any(result.status == "blocked" for result in results))
+        self.assertTrue(
+            any("automatic package install command" in result.message for result in results)
+        )
+
+    def test_deploy_apply_packages_cli_prints_summary(self):
+        with tempfile.TemporaryDirectory() as tmp:
+            root = Path(tmp).resolve()
+            config_path = _init_i2p_config(root)
+            config_path.write_text(
+                config_path.read_text(encoding="utf-8").replace(
+                    'daemon_policy = "auto"',
+                    'daemon_policy = "manage"',
+                ),
+                encoding="utf-8",
+            )
+
+            status, output, error = _run_cli(
+                [
+                    "--config",
+                    str(config_path),
+                    "deploy",
+                    "apply",
+                    "--stage",
+                    "packages",
+                    "--dry-run",
+                    "--profile",
+                    "mobile-i2p",
+                ]
+            )
+
+        self.assertEqual(0, status, error)
+        self.assertIn("AMPG_DEPLOY_PACKAGE", output)
+        self.assertIn("AMPG_DEPLOY_APPLY_SUMMARY stage=packages mode=dry-run", output)
+
     def test_deploy_apply_state_blocks_unapproved_artifacts(self):
         with tempfile.TemporaryDirectory() as tmp:
             root = Path(tmp).resolve()

tests/test_deploy_plan.py

@@ -5,6 +5,10 @@ import unittest
 from pathlib import Path
 
 from ampg.cli import main
+from ampg.config import load_config
+from ampg.deploy import deploy_plan
+from ampg.platforms import platform_by_name
+from ampg.status import DaemonProbe
 
 
 def _source(root: Path) -> Path:
@@ -22,6 +26,10 @@ def _run_cli(args: list[str]) -> tuple[int, str, str]:
     return status, stdout.getvalue(), stderr.getvalue()
 
 
+def _missing_probe(adapter):
+    return DaemonProbe(installed=False, running=False, executable_path=None)
+
+
 class DeployPlanTest(unittest.TestCase):
     def test_deploy_plan_guides_fresh_i2p_only_site(self):
         with tempfile.TemporaryDirectory() as tmp:
@@ -66,6 +74,39 @@ class DeployPlanTest(unittest.TestCase):
         self.assertIn("build --profile mobile-i2p", output)
         self.assertIn("deploy apply --stage addresses --dry-run --profile mobile-i2p", output)
 
+    def test_deploy_plan_guides_package_apply_for_missing_managed_daemons(self):
+        with tempfile.TemporaryDirectory() as tmp:
+            root = Path(tmp).resolve()
+            config_path = root / "gateway.toml"
+            init_status, _, init_error = _run_cli(
+                [
+                    "--config",
+                    str(config_path),
+                    "init",
+                    "site",
+                    "example",
+                    "--domain",
+                    "example.test",
+                    "--source",
+                    str(_source(root)),
+                    "--protocol",
+                    "i2p",
+                ]
+            )
+            self.assertEqual(0, init_status, init_error)
+
+            plan = deploy_plan(
+                load_config(config_path),
+                profile="mobile-i2p",
+                platform_provider=platform_by_name("android-termux"),
+                daemon_probe=_missing_probe,
+            )
+
+        packages = next(step for step in plan.steps if step.stage == "packages")
+        self.assertEqual("todo", packages.status)
+        self.assertIn("deploy apply --stage packages --dry-run", packages.command)
+        self.assertIn("managed daemon package", packages.message)
+
     def test_deploy_plan_shows_dns_review_for_clearnet_site(self):
         with tempfile.TemporaryDirectory() as tmp:
             root = Path(tmp).resolve()