Merge pull request #75 from wowario/checkpoints

update checkpoints.dat for point release

.drone.yml

@@ -1,10 +0,0 @@
----
-kind: pipeline
-type: docker
-name: linux-build
-
-steps:
-- name: linux-build
-  image: wownero/wow-dependencies:v1.0
-  commands:
-  - make release-static-linux-x86_64

.github/FUNDING.yml

@@ -1 +0,0 @@
-custom: https://dev-funding.webui.wowkira.com

.github/workflows/build.yml

@@ -1,96 +0,0 @@
-name: continuous-integration/gh-actions/cli
-
-on: [push, pull_request]
-
-jobs:
-  build-macos:
-    runs-on: macOS-latest
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        submodules: recursive
-    - name: update brew and install dependencies
-      run: brew update && brew install boost hidapi zmq libpgm miniupnpc ldns expat libunwind-headers protobuf
-    - name: build
-      run: make -j3
-
-  build-windows:
-    runs-on: windows-latest
-    defaults:
-      run:
-        shell: msys2 {0}
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        submodules: recursive
-    - uses: eine/setup-msys2@v1
-      with:
-        update: true
-        install: mingw-w64-x86_64-toolchain make mingw-w64-x86_64-cmake mingw-w64-x86_64-boost mingw-w64-x86_64-openssl mingw-w64-x86_64-zeromq mingw-w64-x86_64-libsodium mingw-w64-x86_64-hidapi mingw-w64-x86_64-protobuf-c mingw-w64-x86_64-libusb git
-    - name: build
-      run: make release-static-win64 -j2
-
-  build-ubuntu:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        submodules: recursive
-    - name: remove bundled boost
-      run: sudo rm -rf /usr/local/share/boost
-    - name: set apt conf
-      run: |
-        echo "Acquire::Retries \"3\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::http::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::ftp::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-    - name: update apt
-      run: sudo apt update
-    - name: install monero dependencies
-      run: sudo apt -y install build-essential cmake libboost-all-dev miniupnpc libunbound-dev graphviz doxygen libunwind8-dev pkg-config libssl-dev libzmq3-dev libsodium-dev libhidapi-dev libnorm-dev libusb-1.0-0-dev libpgm-dev libprotobuf-dev protobuf-compiler
-    - name: build
-      run: make -j3
-
-  libwallet-ubuntu:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        submodules: recursive
-    - name: remove bundled boost
-      run: sudo rm -rf /usr/local/share/boost
-    - name: set apt conf
-      run: |
-        echo "Acquire::Retries \"3\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::http::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::ftp::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-    - name: update apt
-      run: sudo apt update
-    - name: install monero dependencies
-      run: sudo apt -y install build-essential cmake libboost-all-dev miniupnpc libunbound-dev graphviz doxygen libunwind8-dev pkg-config libssl-dev libzmq3-dev libsodium-dev libhidapi-dev libnorm-dev libusb-1.0-0-dev libpgm-dev libprotobuf-dev protobuf-compiler
-    - name: build
-      run: cmake -DBUILD_GUI_DEPS=ON && make -j3
-
-  test-ubuntu:
-    needs: build-ubuntu
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        submodules: recursive
-    - name: remove bundled boost
-      run: sudo rm -rf /usr/local/share/boost
-    - name: set apt conf
-      run: |
-        echo "Acquire::Retries \"3\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::http::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::ftp::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-    - name: update apt
-      run: sudo apt update
-    - name: install monero dependencies
-      run: sudo apt -y install build-essential cmake libboost-all-dev miniupnpc libunbound-dev graphviz doxygen libunwind8-dev pkg-config libssl-dev libzmq3-dev libsodium-dev libhidapi-dev libnorm-dev libusb-1.0-0-dev libpgm-dev libprotobuf-dev protobuf-compiler
-    - name: install requests
-      run: pip install requests
-    - name: tests
-      env:
-        CTEST_OUTPUT_ON_FAILURE: ON
-      run: make release-test -j3

.gitignore

@@ -23,7 +23,6 @@ cscope.po.out
 external/miniupnpc/Makefile
 miniupnpcstrings.h
 version/
-ClangBuildAnalyzerSession.txt
 # Created by https://www.gitignore.io
 
 ### C++ ###
@@ -97,9 +96,6 @@ local.properties
 # PDT-specific
 .buildpath
 
-# Netbeans-specific
-nbproject
-
 # sbteclipse plugin
 .target
 
@@ -107,6 +103,4 @@ nbproject
 .texlipse
 .idea/
 
-/testnet
-
-__pycache__/
+/testnet

.gitmodules

@@ -1,19 +1,12 @@
+
 [submodule "external/unbound"]
 	path = external/unbound
-	url = https://git.wownero.com/wownero/unbound
+	url = https://github.com/monero-project/unbound
 	branch = monero
 [submodule "external/miniupnp"]
 	path = external/miniupnp
-	url = https://git.wownero.com/wownero/miniupnp
+	url = https://github.com/monero-project/miniupnp
 	branch = monero
 [submodule "external/rapidjson"]
 	path = external/rapidjson
-	url = https://git.wownero.com/wownero/rapidjson
-[submodule "external/RandomWOW"]
-	path = external/RandomWOW
-	url = https://git.wownero.com/wownero/RandomWOW
-        branch = 1.1.8-wow
-[submodule "external/supercop"]
-	path = external/supercop
-	url = https://git.wownero.com/wownero/supercop
-	branch = monero
+	url = https://github.com/Tencent/rapidjson

.travis.yml

@@ -1,66 +0,0 @@
-sudo: required
-dist: trusty
-os: linux
-language: minimal
-cache:
-  directories:
-  - contrib/depends/built
-  - contrib/depends/sdk-sources
-  - $HOME/.ccache
-env:
-  global:
-    - MAKEJOBS=-j3
-    - CCACHE_SIZE=100M
-    - CCACHE_TEMPDIR=/tmp/.ccache-temp
-    - CCACHE_COMPRESS=1
-    - CCACHE_DIR=$HOME/.ccache
-    - BASE_OUTDIR=$TRAVIS_BUILD_DIR/out
-    - SDK_URL=https://bitcoincore.org/depends-sources/sdks
-    - DOCKER_PACKAGES="build-essential libtool cmake autotools-dev automake pkg-config bsdmainutils curl git ca-certificates ccache"
-  matrix:
-# RISCV 64bit
-    - HOST=riscv64-linux-gnu PACKAGES="python3 gperf g++-riscv64-linux-gnu"
-# ARM v7
-    - HOST=arm-linux-gnueabihf PACKAGES="python3 gperf g++-arm-linux-gnueabihf"
-# ARM v8
-    - HOST=aarch64-linux-gnu PACKAGES="python3 gperf g++-aarch64-linux-gnu"
-# i686 Win
-    - HOST=i686-w64-mingw32 DEP_OPTS="NO_QT=1" PACKAGES="python3 g++-mingw-w64-i686 qttools5-dev-tools" MAKEJOBS=-j2
-# i686 Linux
-    - HOST=i686-pc-linux-gnu PACKAGES="gperf cmake g++-multilib python3-zmq"
-# Win64
-    - HOST=x86_64-w64-mingw32 DEP_OPTS="NO_QT=1" PACKAGES="cmake python3 g++-mingw-w64-x86-64 qttools5-dev-tools"
-# x86_64 Linux
-    - HOST=x86_64-unknown-linux-gnu PACKAGES="gperf cmake python3-zmq libdbus-1-dev libharfbuzz-dev"
-# Cross-Mac
-    - HOST=x86_64-apple-darwin11 PACKAGES="cmake imagemagick libcap-dev librsvg2-bin libz-dev libbz2-dev libtiff-tools python-dev python3-setuptools-git" OSX_SDK=10.11
-# x86_64 Freebsd
-    - HOST=x86_64-unknown-freebsd PACKAGES="clang-8 gperf cmake python3-zmq libdbus-1-dev libharfbuzz-dev"
-
-before_install:
-    - export PATH=$(echo $PATH | tr ':' "\n" | sed '/\/opt\/python/d' | tr "\n" ":" | sed "s|::|:|g")
-install:
-    - env | grep -E '^(CCACHE_|DISPLAY|CONFIG_SHELL)' | tee /tmp/env
-    - if [[ $HOST = *-mingw32 ]]; then DOCKER_ADMIN="--cap-add SYS_ADMIN"; fi
-    - DOCKER_ID=$(docker run $DOCKER_ADMIN -idt --mount type=bind,src=$TRAVIS_BUILD_DIR,dst=$TRAVIS_BUILD_DIR --mount type=bind,src=$CCACHE_DIR,dst=$CCACHE_DIR -w $TRAVIS_BUILD_DIR --env-file /tmp/env ubuntu:18.04)
-    - DOCKER_EXEC="docker exec $DOCKER_ID"
-    - if [ -n "$DPKG_ADD_ARCH" ]; then $DOCKER_EXEC dpkg --add-architecture "$DPKG_ADD_ARCH" ; fi
-    - travis_retry $DOCKER_EXEC apt-get update
-    - travis_retry $DOCKER_EXEC apt-get install --no-install-recommends --no-upgrade -qq $PACKAGES $DOCKER_PACKAGES
-before_script:
-    - mkdir -p contrib/depends/SDKs contrib/depends/sdk-sources
-    - if [ -n "$OSX_SDK" -a ! -f contrib/depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz ]; then curl --location --fail $SDK_URL/MacOSX${OSX_SDK}.sdk.tar.gz -o contrib/depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz; fi
-    - if [ -n "$OSX_SDK" -a -f contrib/depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz ]; then tar -C contrib/depends/SDKs -xf contrib/depends/sdk-sources/MacOSX${OSX_SDK}.sdk.tar.gz; fi
-    - if [[ $HOST = *-mingw32 ]]; then $DOCKER_EXEC bash -c "update-alternatives --set $HOST-g++ \$(which $HOST-g++-posix)"; fi
-    - if [[ $HOST = *-mingw32 ]]; then $DOCKER_EXEC bash -c "update-alternatives --set $HOST-gcc \$(which $HOST-gcc-posix)"; fi
-    - if [ -z "$NO_DEPENDS" ]; then $DOCKER_EXEC bash -c "make $MAKEJOBS -C contrib/depends HOST=$HOST $DEP_OPTS"; fi
-script:
-    - git submodule init && git submodule update
-    - export TRAVIS_COMMIT_LOG=`git log --format=fuller -1`
-    - OUTDIR=$BASE_OUTDIR/$TRAVIS_PULL_REQUEST/$TRAVIS_JOB_NUMBER-$HOST
-    - if [ -z "$NO_DEPENDS" ]; then $DOCKER_EXEC ccache --max-size=$CCACHE_SIZE; fi
-    - $DOCKER_EXEC bash -c "mkdir build && cd build && cmake -DCMAKE_TOOLCHAIN_FILE=$TRAVIS_BUILD_DIR/contrib/depends/$HOST/share/toolchain.cmake .. && make $MAKEJOBS"
-    - export LD_LIBRARY_PATH=$TRAVIS_BUILD_DIR/contrib/depends/$HOST/lib
-after_script:
-    - echo $TRAVIS_COMMIT_RANGE
-    - echo $TRAVIS_COMMIT_LOG

ANONYMITY_NETWORKS.md

@@ -1,236 +0,0 @@
-# Anonymity Networks with Monero
-
-Currently only Tor and I2P have been integrated into Monero. The usage of
-these networks is still considered experimental - there are a few pessimistic
-cases where privacy is leaked. The design is intended to maximize privacy of
-the source of a transaction by broadcasting it over an anonymity network, while
-relying on IPv4 for the remainder of messages to make surrounding node attacks
-(via sybil) more difficult.
-
-
-## Behavior
-
-If _any_ anonymity network is enabled, transactions being broadcast that lack
-a valid "context" (i.e. the transaction did not come from a p2p connection),
-will only be sent to peers on anonymity networks. If an anonymity network is
-enabled but no peers over an anonymity network are available, an error is
-logged and the transaction is kept for future broadcasting over an anonymity
-network. The transaction will not be broadcast unless an anonymity connection
-is made or until `monerod` is shutdown and restarted with only public
-connections enabled.
-
-Anonymity networks can also be used with `monero-wallet-cli` and
-`monero-wallet-rpc` - the wallets will connect to a daemon through a proxy. The
-daemon must provide a hidden service for the RPC itself, which is separate from
-the hidden service for P2P connections.
-
-
-## P2P Commands
-
-Only handshakes, peer timed syncs and transaction broadcast messages are
-supported over anonymity networks. If one `--add-exclusive-node` p2p address
-is specified, then no syncing will take place and only transaction broadcasting
-can occur. It is therefore recommended that `--add-exclusive-node` be combined
-with additional exclusive IPv4 address(es).
-
-
-## Usage
-
-Anonymity networks have no seed nodes (the feature is still considered
-experimental), so a user must specify an address. If configured properly,
-additional peers can be found through typical p2p peerlist sharing.
-
-### Outbound Connections
-
-Connecting to an anonymous address requires the command line option
-`--tx-proxy` which tells `monerod` the ip/port of a socks proxy provided by a
-separate process. On most systems the configuration will look like:
-
-```
---tx-proxy tor,127.0.0.1:9050,10
---tx-proxy i2p,127.0.0.1:9000
-```
-
-which tells `monerod` that ".onion" p2p addresses can be forwarded to a socks
-proxy at IP 127.0.0.1 port 9050 with a max of 10 outgoing connections and
-".b32.i2p" p2p addresses can be forwarded to a socks proxy at IP 127.0.0.1 port
-9000 with the default max outgoing connections. Since there are no seed nodes
-for anonymity connections, peers must be manually specified:
-
-```
---add-exclusive-node rveahdfho7wo4b2m.onion:28083
---add-peer rveahdfho7wo4b2m.onion:28083
-```
-
-Either option can be listed multiple times, and can specify any mix of Tor,
-I2P, and IPv4 addresses. Using `--add-exclusive-node` will prevent the usage of
-seed nodes on ALL networks, which will typically be undesirable.
-
-### Inbound Connections
-
-Receiving anonymity connections is done through the option
-`--anonymous-inbound`. This option tells `monerod` the inbound address, network
-type, and max connections:
-
-```
---anonymous-inbound rveahdfho7wo4b2m.onion:28083,127.0.0.1:28083,25
---anonymous-inbound cmeua5767mz2q5jsaelk2rxhf67agrwuetaso5dzbenyzwlbkg2q.b32.i2p:5000,127.0.0.1:30000
-```
-
-which tells `monerod` that a max of 25 inbound Tor connections are being
-received at address "rveahdfho7wo4b2m.onion:28083" and forwarded to `monerod`
-localhost port 28083, and a default max I2P connections are being received at
-address "cmeua5767mz2q5jsaelk2rxhf67agrwuetaso5dzbenyzwlbkg2q.b32.i2p:5000" and
-forwarded to `monerod` localhost port 30000.
-These addresses will be shared with outgoing peers, over the same network type,
-otherwise the peer will not be notified of the peer address by the proxy.
-
-### Wallet RPC
-
-An anonymity network can be configured to forward incoming connections to a
-`monerod` RPC port - which is independent from the configuration for incoming
-P2P anonymity connections. The anonymity network (Tor/i2p) is
-[configured in the same manner](#configuration), except the localhost port
-must be the RPC port (typically 18081 for mainnet) instead of the p2p port:
-
-```
-HiddenServiceDir /var/lib/tor/data/monero
-HiddenServicePort 18081 127.0.0.1:18081
-```
-
-Then the wallet will be configured to use a Tor/i2p address:
-```
---proxy 127.0.0.1:9050
---daemon-address rveahdfho7wo4b2m.onion
-```
-
-The proxy must match the address type - a Tor proxy will not work properly with
-i2p addresses, etc.
-
-i2p and onion addresses provide the information necessary to authenticate and
-encrypt the connection from end-to-end. If desired, SSL can also be applied to
-the connection with `--daemon-address https://rveahdfho7wo4b2m.onion` which
-requires a server certificate that is signed by a "root" certificate on the
-machine running the wallet. Alternatively, `--daemon-cert-file` can be used to
-specify a certificate to authenticate the server.
-
-Proxies can also be used to connect to "clearnet" (ipv4 addresses or ICANN
-domains), but `--daemon-cert-file` _must_ be used for authentication and
-encryption.
-
-### Network Types
-
-#### Tor & I2P
-
-Options `--add-exclusive-node` and `--add-peer` recognize ".onion" and
-".b32.i2p" addresses, and will properly forward those addresses to the proxy
-provided with `--tx-proxy tor,...` or `--tx-proxy i2p,...`.
-
-Option `--anonymous-inbound` also recognizes ".onion" and ".b32.i2p" addresses,
-and will automatically be sent out to outgoing Tor/I2P connections so the peer
-can distribute the address to its other peers.
-
-##### Configuration
-
-Tor must be configured for hidden services. An example configuration ("torrc")
-might look like:
-
-```
-HiddenServiceDir /var/lib/tor/data/monero
-HiddenServicePort 28083 127.0.0.1:28083
-```
-
-This will store key information in `/var/lib/tor/data/monero` and will forward
-"Tor port" 28083 to port 28083 of ip 127.0.0.1. The file
-`/usr/lib/tor/data/monero/hostname` will contain the ".onion" address for use
-with `--anonymous-inbound`.
-
-I2P must be configured with a standard server tunnel. Configuration differs by
-I2P implementation.
-
-## Privacy Limitations
-
-There are currently some techniques that could be used to _possibly_ identify
-the machine that broadcast a transaction over an anonymity network.
-
-### Timestamps
-
-The peer timed sync command sends the current time in the message. This value
-can be used to link an onion address to an IPv4/IPv6 address. If a peer first
-sees a transaction over Tor, it could _assume_ (possibly incorrectly) that the
-transaction originated from the peer. If both the Tor connection and an
-IPv4/IPv6 connection have timestamps that are approximately close in value they
-could be used to link the two connections. This is less likely to happen if the
-system clock is fairly accurate - many peers on the Monero network should have
-similar timestamps.
-
-#### Mitigation
-
-Keep the system clock accurate so that fingerprinting is more difficult. In
-the future a random offset might be applied to anonymity networks so that if
-the system clock is noticeably off (and therefore more fingerprintable),
-linking the public IPv4/IPv6 connections with the anonymity networks will be
-more difficult.
-
-### Intermittent Monero Syncing
-
-If a user only runs `monerod` to send a transaction then quit, this can also
-be used by an ISP to link a user to a transaction.
-
-#### Mitigation
-
-Run `monerod` as often as possible to conceal when transactions are being sent.
-Future versions will also have peers that first receive a transaction over an
-anonymity network delay the broadcast to public peers by a randomized amount.
-This will not completely mitigate a user who syncs up sends then quits, in
-part because this rule is not enforceable, so this mitigation strategy is
-simply a best effort attempt.
-
-### Active Bandwidth Shaping
-
-An attacker could attempt to bandwidth shape traffic in an attempt to determine
-the source of a Tor/I2P connection. There isn't great mitigation against
-this, but I2P should provide better protection against this attack since
-the connections are not circuit based.
-
-#### Mitigation
-
-The best mitigation is to use I2P instead of Tor. However, I2P
-has a smaller set of users (less cover traffic) and academic reviews, so there
-is a trade off in potential issues. Also, anyone attempting this strategy really
-wants to uncover a user, it seems unlikely that this would be performed against
-every Tor/I2P user.
-
-### I2P/Tor Stream Used Twice
-
-If a single I2P/Tor stream is used 2+ times for transmitting a transaction, the
-operator of the hidden service can conclude that both transactions came from the
-same source. If the subsequent transactions spend a change output from the
-earlier transactions, this will also reveal the "real" spend in the ring
-signature. This issue was (primarily) raised by @secparam on Twitter.
-
-#### Mitigation
-
-`monerod` currently selects two outgoing connections every 5 minutes for
-transmitting transactions over I2P/Tor. Using outgoing connections prevents an
-adversary from making many incoming connections to obtain information (this
-technique was taken from Dandelion). Outgoing connections also do not have a
-persistent public key identity - the creation of a new circuit will generate
-a new public key identity. The lock time on a change address is ~20 minutes, so
-`monerod` will have rotated its selected outgoing connections several times in
-most cases. However, the number of outgoing connections is typically a small
-fixed number, so there is a decent probability of re-use with the same public
-key identity.
-
-@secparam (twitter) recommended changing circuits (Tor) as an additional
-precaution. This is likely not a good idea - forcibly requesting Tor to change
-circuits is observable by the ISP. Instead, `monerod` should likely disconnect
-from peers occasionally. Tor will rotate circuits every ~10 minutes, so
-establishing new connections will use a new public key identity and make it
-more difficult for the hidden service to link information. This process will
-have to be done carefully because closing/reconnecting connections can also
-leak information to hidden services if done improperly.
-
-At the current time, if users need to frequently make transactions, I2P/Tor
-will improve privacy from ISPs and other common adversaries, but still have
-some metadata leakages to unknown hidden service operators.

CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2020, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 #
 # All rights reserved.
 #
@@ -27,72 +27,22 @@
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 #
 # Parts of this file are originally copyright (c) 2012-2013 The Cryptonote developers
-
-set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
-
 list(INSERT CMAKE_MODULE_PATH 0
-  "${CMAKE_CURRENT_SOURCE_DIR}/cmake")
+  "${CMAKE_SOURCE_DIR}/cmake")
 include(CheckCCompilerFlag)
 include(CheckCXXCompilerFlag)
 include(CheckLinkerFlag)
 include(CheckLibraryExists)
 include(CheckFunctionExists)
-include(FindPythonInterp)
 
 if (IOS)
     INCLUDE(CmakeLists_IOS.txt)
 endif()
 
 cmake_minimum_required(VERSION 2.8.7)
-message(STATUS "CMake version ${CMAKE_VERSION}")
 
 project(monero)
 
-option (USE_CCACHE "Use ccache if a usable instance is found" ON)
-if (USE_CCACHE)
-	include(FindCcache) # Has to be included after the project() macro, to be able to read the CXX variable.
-else()
-	message(STATUS "ccache deselected")
-endif()
-option (USE_COMPILATION_TIME_PROFILER "Use compilation time profiler (for CLang >= 9 only)" OFF)
-if (USE_COMPILATION_TIME_PROFILER)
-	if (NOT "${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang")
-		message(FATAL_ERROR "The flag USE_COMPILATION_TIME_PROFILER is meant to be set only for CLang compiler!")
-	endif()
-	add_compile_options("-ftime-trace")
-endif()
-
-# Job pool feature requires Ninja.
-if (${CMAKE_VERSION} VERSION_GREATER "3.0.0")
-  set(WOWNERO_PARALLEL_COMPILE_JOBS "" CACHE STRING "The maximum number of concurrent compilation jobs.")
-  if (WOWNERO_PARALLEL_COMPILE_JOBS)
-    set_property(GLOBAL APPEND PROPERTY JOB_POOLS compile_job_pool=${WOWNERO_PARALLEL_COMPILE_JOBS})
-    set(CMAKE_JOB_POOL_COMPILE compile_job_pool)
-  endif ()
-
-  set(WOWNERO_PARALLEL_LINK_JOBS "" CACHE STRING "The maximum number of concurrent link jobs.")
-  if (WOWNERO_PARALLEL_LINK_JOBS)
-    set_property(GLOBAL APPEND PROPERTY JOB_POOLS link_job_pool=${WOWNERO_PARALLEL_LINK_JOBS})
-    set(CMAKE_JOB_POOL_LINK link_job_pool)
-  endif ()
-endif ()
-  
-option (USE_CLANG_TIDY_C   "Lint the code with clang-tidy - variant C"   OFF)
-option (USE_CLANG_TIDY_CXX "Lint the code with clang-tidy - variant C++" OFF)
-if (USE_CLANG_TIDY_C AND USE_CLANG_TIDY_CXX)
-	message(FATAL_ERROR "Enabling both USE_CLANG_TIDY_C and USE_CLANG_TIDY_CXX simultaneously crashes clang-tidy.")
-endif()
-if (USE_CLANG_TIDY_C OR USE_CLANG_TIDY_CXX)
-	include(SetClangTidy)
-endif()
-if (USE_CLANG_TIDY_C)
-	monero_clang_tidy("C")
-elseif (USE_CLANG_TIDY_CXX)
-	monero_clang_tidy("CXX")
-endif()
-
-enable_language(C ASM)
-
 function (die msg)
   if (NOT WIN32)
     string(ASCII 27 Esc)
@@ -147,24 +97,6 @@ function (add_definition_if_library_exists library function header var)
   endif()
 endfunction()
 
-option(RELINK_TARGETS "Relink targets, when just a dependant .so changed, but not its header?" OFF)
-function (monero_set_target_no_relink target)
-  if (RELINK_TARGETS MATCHES OFF)
-    # Will not relink the target, when just its dependant .so has changed, but not it's interface
-    set_target_properties("${target}" PROPERTIES LINK_DEPENDS_NO_SHARED true)
-  endif()
-endfunction()
-
-function (monero_add_minimal_executable name)
-  source_group("${name}"
-    FILES
-      ${ARGN})
-
-  add_executable("${name}"
-    ${ARGN})
-    monero_set_target_no_relink( ${name} )
-endfunction()
-
 if(NOT CMAKE_BUILD_TYPE)
   set(CMAKE_BUILD_TYPE Release CACHE STRING "Build type" FORCE)
   message(STATUS "Setting default build type: ${CMAKE_BUILD_TYPE}")
@@ -179,16 +111,11 @@ string(TOLOWER ${CMAKE_BUILD_TYPE} CMAKE_BUILD_TYPE_LOWER)
 # when ARCH is not set to an explicit identifier, cmake's builtin is used
 # to identify the target architecture, to direct logic in this cmake script.
 # Since ARCH is a cached variable, it will not be set on first cmake invocation.
-if (NOT ARCH_ID)
 if (NOT ARCH OR ARCH STREQUAL "" OR ARCH STREQUAL "native" OR ARCH STREQUAL "default")
-  if(CMAKE_SYSTEM_PROCESSOR STREQUAL "")
-    set(CMAKE_SYSTEM_PROCESSOR ${CMAKE_HOST_SYSTEM_PROCESSOR})
-  endif()
   set(ARCH_ID "${CMAKE_SYSTEM_PROCESSOR}")
 else()
   set(ARCH_ID "${ARCH}")
 endif()
-endif()
 string(TOLOWER "${ARCH_ID}" ARM_ID)
 string(SUBSTRING "${ARM_ID}" 0 3 ARM_TEST)
 if (ARM_TEST STREQUAL "arm")
@@ -210,27 +137,9 @@ endif()
 
 if(ARCH_ID STREQUAL "ppc64le")
   set(PPC64LE 1)
-  set(PPC64   0)
-  set(PPC     0)
 endif()
 
-if(ARCH_ID STREQUAL "powerpc64" OR ARCH_ID STREQUAL "ppc64")
-  set(PPC64LE 0)
-  set(PPC64   1)
-  set(PPC     0)
-endif()
-
-if(ARCH_ID STREQUAL "powerpc" OR ARCH_ID STREQUAL "ppc")
-  set(PPC64LE 0)
-  set(PPC64   0)
-  set(PPC     1)
-endif()
-
-if(ARCH_ID STREQUAL "s390x")
-  set(S390X 1)
-endif()
-
-if(WIN32 OR ARM OR PPC64LE OR PPC64 OR PPC)
+if(WIN32 OR ARM)
   set(OPT_FLAGS_RELEASE "-O2")
 else()
   set(OPT_FLAGS_RELEASE "-Ofast")
@@ -253,29 +162,6 @@ if(NOT MANUAL_SUBMODULES)
   endif()
 endif()
 
-if(NOT MANUAL_SUBMODULES)
-  find_package(Git)
-  if(GIT_FOUND)
-    function (check_submodule relative_path)
-      execute_process(COMMAND git rev-parse "HEAD" WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/${relative_path} OUTPUT_VARIABLE localHead)
-      execute_process(COMMAND git rev-parse "HEAD:${relative_path}" WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} OUTPUT_VARIABLE checkedHead)
-      string(COMPARE EQUAL "${localHead}" "${checkedHead}" upToDate)
-      if (upToDate)
-        message(STATUS "Submodule '${relative_path}' is up-to-date")
-      else()
-        message(FATAL_ERROR "Submodule '${relative_path}' is not up-to-date. Please update all submodules with\ngit submodule update --init --force\nor run cmake with -DMANUAL_SUBMODULES=1\n")
-      endif()
-    endfunction ()
-    
-    message(STATUS "Checking submodules")
-    check_submodule(external/miniupnp)
-    check_submodule(external/unbound)
-    check_submodule(external/rapidjson)
-    check_submodule(external/RandomWOW)
-    check_submodule(external/supercop)
-  endif()
-endif()
-
 set(CMAKE_C_FLAGS_RELEASE "-DNDEBUG ${OPT_FLAGS_RELEASE}")
 set(CMAKE_CXX_FLAGS_RELEASE "-DNDEBUG ${OPT_FLAGS_RELEASE}")
 
@@ -284,9 +170,6 @@ set(PER_BLOCK_CHECKPOINT 1)
 
 if(PER_BLOCK_CHECKPOINT)
   add_definitions("-DPER_BLOCK_CHECKPOINT")
-  set(Blocks "blocks")
-else()
-  set(Blocks "")
 endif()
 
 list(INSERT CMAKE_MODULE_PATH 0
@@ -321,20 +204,8 @@ endif()
 set_property(GLOBAL PROPERTY USE_FOLDERS ON)
 enable_testing()
 
-option(BUILD_DOCUMENTATION "Build the Doxygen documentation." OFF)
+option(BUILD_DOCUMENTATION "Build the Doxygen documentation." ON)
 option(BUILD_TESTS "Build tests." OFF)
-if (CMAKE_BUILD_TYPE STREQUAL "Debug")
-  set(DEFAULT_BUILD_DEBUG_UTILITIES ON)
-else()
-  set(DEFAULT_BUILD_DEBUG_UTILITIES OFF)
-endif()
-option(BUILD_DEBUG_UTILITIES "Build debug utilities." DEFAULT_BUILD_DEBUG_UTILITIES)
-
-if(OSSFUZZ)
-  message(STATUS "Using OSS-Fuzz fuzzing system")
-  set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DOSSFUZZ")
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DOSSFUZZ")
-endif()
 
 # Check whether we're on a 32-bit or 64-bit system
 if(CMAKE_SIZEOF_VOID_P EQUAL "8")
@@ -374,7 +245,7 @@ endif()
 # elseif(CMAKE_SYSTEM_NAME MATCHES ".*BSDI.*")
 #   set(BSDI TRUE)
 
-include_directories(external/rapidjson/include external/easylogging++ src contrib/epee/include external external/supercop/include)
+include_directories(external/rapidjson/include external/easylogging++ src contrib/epee/include external)
 
 if(APPLE)
   include_directories(SYSTEM /usr/include/malloc)
@@ -439,9 +310,54 @@ endif()
 # memory was the default in Cryptonote before Monero implemented LMDB, it still works but is unnecessary.
 # set(DATABASE memory)
 set(DATABASE lmdb)
-message(STATUS "Using LMDB as default DB type")
-set(BLOCKCHAIN_DB DB_LMDB)
-add_definitions("-DDEFAULT_DB_TYPE=\"lmdb\"")
+
+if (DEFINED ENV{DATABASE})
+  set(DATABASE $ENV{DATABASE})
+  message(STATUS "DATABASE set: ${DATABASE}")
+else()
+  message(STATUS "Could not find DATABASE in env (not required unless you want to change database type from default: ${DATABASE})")
+endif()
+
+set(BERKELEY_DB_OVERRIDE 0)
+if (DEFINED ENV{BERKELEY_DB})
+  set(BERKELEY_DB_OVERRIDE 1)
+  set(BERKELEY_DB $ENV{BERKELEY_DB})
+elseif()
+  set(BERKELEY_DB 0)
+endif()
+
+if (DATABASE STREQUAL "lmdb")
+  message(STATUS "Using LMDB as default DB type")
+  set(BLOCKCHAIN_DB DB_LMDB)
+  add_definitions("-DDEFAULT_DB_TYPE=\"lmdb\"")
+elseif (DATABASE STREQUAL "berkeleydb")
+  find_package(BerkeleyDB)
+  if(NOT BERKELEY_DB)
+      die("Found BerkeleyDB includes, but could not find BerkeleyDB library. Please make sure you have installed libdb and libdb-dev / libdb++-dev or the equivalent.")
+  else()
+    message(STATUS "Found BerkeleyDB include (db.h) in ${BERKELEY_DB_INCLUDE_DIR}")
+    if(BERKELEY_DB_LIBRARIES)
+      message(STATUS "Found BerkeleyDB shared library")
+      set(BDB_STATIC false CACHE BOOL "BDB Static flag")
+      set(BDB_INCLUDE ${BERKELEY_DB_INCLUDE_DIR} CACHE STRING "BDB include path")
+      set(BDB_LIBRARY ${BERKELEY_DB_LIBRARIES} CACHE STRING "BDB library name")
+      set(BDB_LIBRARY_DIRS "" CACHE STRING "BDB Library dirs")
+      set(BERKELEY_DB 1)
+    else()
+      die("Found BerkeleyDB includes, but could not find BerkeleyDB library. Please make sure you have installed libdb and libdb-dev / libdb++-dev or the equivalent.")
+    endif()
+  endif()
+
+  message(STATUS "Using Berkeley DB as default DB type")
+  add_definitions("-DDEFAULT_DB_TYPE=\"berkeley\"")
+else()
+  die("Invalid database type: ${DATABASE}")
+endif()
+
+if(BERKELEY_DB)
+  add_definitions("-DBERKELEY_DB")
+endif()
+
 add_definitions("-DBLOCKCHAIN_DB=${BLOCKCHAIN_DB}")
 
 # Can't install hook in static build on OSX, because OSX linker does not support --wrap
@@ -450,14 +366,11 @@ add_definitions("-DBLOCKCHAIN_DB=${BLOCKCHAIN_DB}")
 if (APPLE)
   set(DEFAULT_STACK_TRACE OFF)
   set(LIBUNWIND_LIBRARIES "")
-elseif (DEPENDS AND NOT LINUX)
-  set(DEFAULT_STACK_TRACE OFF)
-  set(LIBUNWIND_LIBRARIES "")
 elseif(CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT MINGW)
   set(DEFAULT_STACK_TRACE ON)
   set(STACK_TRACE_LIB "easylogging++") # for diag output only
   set(LIBUNWIND_LIBRARIES "")
-elseif (ARM)
+elseif (ARM AND STATIC)
   set(DEFAULT_STACK_TRACE OFF)
   set(LIBUNWIND_LIBRARIES "")
 else()
@@ -483,8 +396,6 @@ if (UNIX AND NOT APPLE)
   # Note that at the time of this writing the -Wstrict-prototypes flag added below will make this fail
   set(THREADS_PREFER_PTHREAD_FLAG ON)
   find_package(Threads)
-  add_c_flag_if_supported(-pthread CMAKE_C_FLAGS)
-  add_cxx_flag_if_supported(-pthread CMAKE_CXX_FLAGS)
 endif()
 
 # Handle OpenSSL, used for sha256sum on binary updates and light wallet ssl http
@@ -493,8 +404,7 @@ if (CMAKE_SYSTEM_NAME MATCHES "(SunOS|Solaris)")
 endif ()
 
 if (APPLE AND NOT IOS)
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -march=x86-64 -fvisibility=default -std=c++11")
-  if (NOT OPENSSL_ROOT_DIR)
+  if (NOT OpenSSL_DIR)
       EXECUTE_PROCESS(COMMAND brew --prefix openssl
         OUTPUT_VARIABLE OPENSSL_ROOT_DIR
         OUTPUT_STRIP_TRAILING_WHITESPACE)
@@ -511,7 +421,7 @@ if(STATIC AND NOT IOS)
   endif()
 endif()
 
-find_package(HIDAPI)
+find_package(PCSC)
 
 add_definition_if_library_exists(c memset_s "string.h" HAVE_MEMSET_S)
 add_definition_if_library_exists(c explicit_bzero "strings.h" HAVE_EXPLICIT_BZERO)
@@ -519,20 +429,14 @@ add_definition_if_function_found(strptime HAVE_STRPTIME)
 
 add_definitions(-DAUTO_INITIALIZE_EASYLOGGINGPP)
 
-set(MONERO_GENERATED_HEADERS_DIR "${CMAKE_CURRENT_BINARY_DIR}/generated_include")
-include_directories(${MONERO_GENERATED_HEADERS_DIR})
-
 # Generate header for embedded translations
-# Generate header for embedded translations, use target toolchain if depends, otherwise use the
-# lrelease and lupdate binaries from the host
 include(ExternalProject)
 ExternalProject_Add(generate_translations_header
   SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/translations"
   BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}/translations"
-  STAMP_DIR ${LRELEASE_PATH}
-  CMAKE_ARGS -DLRELEASE_PATH=${LRELEASE_PATH}
   INSTALL_COMMAND cmake -E echo "")
 include_directories("${CMAKE_CURRENT_BINARY_DIR}/translations")
+
 add_subdirectory(external)
 
 # Final setup for libunbound
@@ -546,23 +450,25 @@ link_directories(${EASYLOGGING_LIBRARY_DIRS})
 # Final setup for liblmdb
 include_directories(${LMDB_INCLUDE})
 
+# Final setup for Berkeley DB
+if (BERKELEY_DB)
+  include_directories(${BDB_INCLUDE})
+endif()
+
 # Final setup for libunwind
 include_directories(${LIBUNWIND_INCLUDE})
 link_directories(${LIBUNWIND_LIBRARY_DIRS})
 
-# Final setup for hid
-if (HIDAPI_FOUND) 
-  message(STATUS "Using HIDAPI include dir at ${HIDAPI_INCLUDE_DIR}")
-  add_definitions(-DHAVE_HIDAPI)
-  include_directories(${HIDAPI_INCLUDE_DIR})
-  link_directories(${LIBHIDAPI_LIBRARY_DIRS})
-else (HIDAPI_FOUND)
-  message(STATUS "Could not find HIDAPI")
+# Final setup for libpcsc
+if (PCSC_FOUND) 
+  message(STATUS "Using PCSC include dir at ${PCSC_INCLUDE_DIR}")
+  add_definitions(-DHAVE_PCSC)
+  include_directories(${PCSC_INCLUDE_DIR})
+  link_directories(${LIBPCSC_LIBRARY_DIRS})
+else (PCSC_FOUND)
+  message(STATUS "Could not find PCSC")
 endif()
 
-# Trezor support check
-include(CheckTrezor)
-
 if(MSVC)
   add_definitions("/bigobj /MP /W3 /GS- /D_CRT_SECURE_NO_WARNINGS /wd4996 /wd4345 /D_WIN32_WINNT=0x0600 /DWIN32_LEAN_AND_MEAN /DGTEST_HAS_TR1_TUPLE=0 /FIinline_c.h /D__SSE4_1__")
   # set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /Dinline=__inline")
@@ -575,70 +481,22 @@ if(MSVC)
   include_directories(SYSTEM src/platform/msc)
 else()
   include(TestCXXAcceptsFlag)
-  if (NOT ARCH)
-    set(ARCH native CACHE STRING "CPU to build for: -march value or 'default' to not pass -march at all")
-  endif()
+  set(ARCH native CACHE STRING "CPU to build for: -march value or 'default' to not pass -march at all")
   message(STATUS "Building on ${CMAKE_SYSTEM_PROCESSOR} for ${ARCH}")
   if(ARCH STREQUAL "default")
     set(ARCH_FLAG "")
   elseif(PPC64LE)
-    set(ARCH_FLAG "-mcpu=power8")
-  elseif(PPC64)
-    set(ARCH_FLAG "-mcpu=970")
-  elseif(PPC)
-    set(ARCH_FLAG "-mcpu=7400")
+    set(ARCH_FLAG "-mcpu=${ARCH}")
   elseif(IOS AND ARCH STREQUAL "arm64")
     message(STATUS "IOS: Changing arch from arm64 to armv8")
     set(ARCH_FLAG "-march=armv8")
   else()
     set(ARCH_FLAG "-march=${ARCH}")
-    if(ARCH STREQUAL "native")
-      check_c_compiler_flag(-march=native CC_SUPPORTS_MARCH_NATIVE)
-      if (NOT CC_SUPPORTS_MARCH_NATIVE)
-        check_c_compiler_flag(-mtune=native CC_SUPPORTS_MTUNE_NATIVE)
-        if (CC_SUPPORTS_MTUNE_NATIVE)
-          set(ARCH_FLAG "-mtune=${ARCH}")
-        else()
-          set(ARCH_FLAG "")
-        endif()
-      endif()
-    endif()
   endif()
-
-  option(NO_AES "Explicitly disable AES support" ${NO_AES})
-
-  if(NO_AES)
-    message(STATUS "AES support explicitly disabled")
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DNO_AES")
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DNO_AES")
-  elseif(NOT ARM AND NOT PPC64LE AND NOT PPC64 AND NOT PPC AND NOT S390X)
-    message(STATUS "AES support enabled")
-    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -maes")
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -maes")
-  elseif(PPC64LE OR PPC64 OR PPC)
-    message(STATUS "AES support not available on POWER")
-  elseif(S390X)
-    message(STATUS "AES support not available on s390x")
-  elseif(ARM6)
-    message(STATUS "AES support not available on ARMv6")
-  elseif(ARM7)
-    message(STATUS "AES support not available on ARMv7")
-  elseif(ARM8)
-    CHECK_CXX_ACCEPTS_FLAG("-march=${ARCH}+crypto" ARCH_PLUS_CRYPTO)
-    if(ARCH_PLUS_CRYPTO)
-      message(STATUS "Crypto extensions enabled for ARMv8")
-      set(ARCH_FLAG "-march=${ARCH}+crypto")
-    else()
-      message(STATUS "Crypto extensions unavailable on your ARMv8 device")
-    endif()
-  else()
-    message(STATUS "AES support disabled")
-  endif()
-
-  set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${ARCH_FLAG}")
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${ARCH_FLAG}")
-
   set(WARNINGS "-Wall -Wextra -Wpointer-arith -Wundef -Wvla -Wwrite-strings -Wno-error=extra -Wno-error=deprecated-declarations -Wno-unused-parameter -Wno-unused-variable -Wno-error=unused-variable -Wno-error=undef -Wno-error=uninitialized")
+  if(NOT MINGW)
+    set(WARNINGS_AS_ERRORS_FLAG "-Werror")
+  endif()
   if(CMAKE_C_COMPILER_ID STREQUAL "Clang")
     if(ARM)
       set(WARNINGS "${WARNINGS} -Wno-error=inline-asm")
@@ -687,7 +545,7 @@ else()
   set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fno-strict-aliasing")
 
   # if those don't work for your compiler, single it out where appropriate
-  if(CMAKE_BUILD_TYPE STREQUAL "Release" AND NOT OPENBSD)
+  if(CMAKE_BUILD_TYPE STREQUAL "Release")
     set(C_SECURITY_FLAGS "${C_SECURITY_FLAGS} -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1")
     set(CXX_SECURITY_FLAGS "${CXX_SECURITY_FLAGS} -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1")
   endif()
@@ -699,33 +557,14 @@ else()
   add_cxx_flag_if_supported(-Wformat-security CXX_SECURITY_FLAGS)
 
   # -fstack-protector
-  if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1)))
-    add_c_flag_if_supported(-fstack-protector C_SECURITY_FLAGS)
-    add_cxx_flag_if_supported(-fstack-protector CXX_SECURITY_FLAGS)
-    add_c_flag_if_supported(-fstack-protector-strong C_SECURITY_FLAGS)
-    add_cxx_flag_if_supported(-fstack-protector-strong CXX_SECURITY_FLAGS)
-  endif()
-
-  # New in GCC 8.2
-  if (NOT OPENBSD AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1)))
-    add_c_flag_if_supported(-fcf-protection=full C_SECURITY_FLAGS)
-    add_cxx_flag_if_supported(-fcf-protection=full CXX_SECURITY_FLAGS)
-  endif()
-  if (NOT WIN32 AND NOT OPENBSD)
-    add_c_flag_if_supported(-fstack-clash-protection C_SECURITY_FLAGS)
-    add_cxx_flag_if_supported(-fstack-clash-protection CXX_SECURITY_FLAGS)
-  endif()
-
-  # Removed in GCC 9.1 (or before ?), but still accepted, so spams the output
-  if (NOT (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1))
-    add_c_flag_if_supported(-mmitigate-rop C_SECURITY_FLAGS)
-    add_cxx_flag_if_supported(-mmitigate-rop CXX_SECURITY_FLAGS)
-  endif()
+  add_c_flag_if_supported(-fstack-protector C_SECURITY_FLAGS)
+  add_cxx_flag_if_supported(-fstack-protector CXX_SECURITY_FLAGS)
+  add_c_flag_if_supported(-fstack-protector-strong C_SECURITY_FLAGS)
+  add_cxx_flag_if_supported(-fstack-protector-strong CXX_SECURITY_FLAGS)
 
   # linker
-  if (NOT SANITIZE AND NOT OSSFUZZ AND NOT (WIN32 AND (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_LESS 9.1)))
-    # PIE executables randomly crash at startup with ASAN
-    # Windows binaries die on startup with PIE when compiled with GCC <9.x
+  if (NOT WIN32)
+    # Windows binaries die on startup with PIE
     add_linker_flag_if_supported(-pie LD_SECURITY_FLAGS)
   endif()
   add_linker_flag_if_supported(-Wl,-z,relro LD_SECURITY_FLAGS)
@@ -733,32 +572,55 @@ else()
   add_linker_flag_if_supported(-Wl,-z,noexecstack noexecstack_SUPPORTED)
   if (noexecstack_SUPPORTED)
     set(LD_SECURITY_FLAGS "${LD_SECURITY_FLAGS} -Wl,-z,noexecstack")
+    set(LD_RAW_FLAGS ${LD_RAW_FLAGS} -z noexecstack)
   endif()
   add_linker_flag_if_supported(-Wl,-z,noexecheap noexecheap_SUPPORTED)
   if (noexecheap_SUPPORTED)
     set(LD_SECURITY_FLAGS "${LD_SECURITY_FLAGS} -Wl,-z,noexecheap")
-  endif()
-
-  if(BACKCOMPAT)
-      add_linker_flag_if_supported(-Wl,--wrap=__divmoddi4 LD_BACKCOMPAT_FLAGS)
-      add_linker_flag_if_supported(-Wl,--wrap=glob LD_BACKCOMPAT_FLAGS)
-      message(STATUS "Using Lib C back compat flags: ${LD_BACKCOMPAT_FLAGS}")
+    set(LD_RAW_FLAGS ${LD_RAW_FLAGS} -z noexecheap)
   endif()
 
   # some windows linker bits
   if (WIN32)
     add_linker_flag_if_supported(-Wl,--dynamicbase LD_SECURITY_FLAGS)
     add_linker_flag_if_supported(-Wl,--nxcompat LD_SECURITY_FLAGS)
-    add_linker_flag_if_supported(-Wl,--high-entropy-va LD_SECURITY_FLAGS)
   endif()
 
   message(STATUS "Using C security hardening flags: ${C_SECURITY_FLAGS}")
   message(STATUS "Using C++ security hardening flags: ${CXX_SECURITY_FLAGS}")
   message(STATUS "Using linker security hardening flags: ${LD_SECURITY_FLAGS}")
 
-  set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=c11 -D_GNU_SOURCE ${MINGW_FLAG} ${STATIC_ASSERT_FLAG} ${WARNINGS} ${C_WARNINGS} ${COVERAGE_FLAGS} ${PIC_FLAG} ${C_SECURITY_FLAGS}")
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11 -D_GNU_SOURCE ${MINGW_FLAG} ${STATIC_ASSERT_CPP_FLAG} ${WARNINGS} ${CXX_WARNINGS} ${COVERAGE_FLAGS} ${PIC_FLAG} ${CXX_SECURITY_FLAGS}")
-  set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${LD_SECURITY_FLAGS} ${LD_BACKCOMPAT_FLAGS}")
+  option(NO_AES "Explicitly disable AES support" ${NO_AES})
+
+  if(NO_AES)
+    message(STATUS "AES support explicitly disabled")
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DNO_AES")
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DNO_AES")
+  elseif(NOT ARM AND NOT PPC64LE)
+    message(STATUS "AES support enabled")
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -maes")
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -maes")
+  elseif(PPC64LE)
+    message(STATUS "AES support not available on ppc64le")
+  elseif(ARM6)
+    message(STATUS "AES support not available on ARMv6")
+  elseif(ARM7)
+    message(STATUS "AES support not available on ARMv7")
+  elseif(ARM8)
+    CHECK_CXX_ACCEPTS_FLAG("-march=${ARCH}+crypto" ARCH_PLUS_CRYPTO)
+    if(ARCH_PLUS_CRYPTO)
+      message(STATUS "Crypto extensions enabled for ARMv8")
+      set(ARCH_FLAG "-march=${ARCH}+crypto")
+    else()
+      message(STATUS "Crypto extensions unavailable on your ARMv8 device")
+    endif()
+  else()
+    message(STATUS "AES support disabled")
+  endif()
+
+  set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=c11 -D_GNU_SOURCE ${MINGW_FLAG} ${STATIC_ASSERT_FLAG} ${WARNINGS} ${C_WARNINGS} ${ARCH_FLAG} ${COVERAGE_FLAGS} ${PIC_FLAG} ${C_SECURITY_FLAGS}")
+  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11 -D_GNU_SOURCE ${MINGW_FLAG} ${STATIC_ASSERT_CPP_FLAG} ${WARNINGS} ${CXX_WARNINGS} ${ARCH_FLAG} ${COVERAGE_FLAGS} ${PIC_FLAG} ${CXX_SECURITY_FLAGS}")
+  set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} ${LD_SECURITY_FLAGS}")
 
   # With GCC 6.1.1 the compiled binary malfunctions due to aliasing. Until that
   # is fixed in the code (Issue #847), force compiler to be conservative.
@@ -798,10 +660,6 @@ else()
       message(STATUS "Selecting VFP for ARMv6")
       set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mfpu=vfp")
       set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mfpu=vfp")
-      if(DEPENDS)
-        set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -marm")
-        set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -marm")
-      endif()
     endif(ARM6)
 
     if(ARM7)
@@ -846,8 +704,7 @@ else()
 
   endif(ARM)
 
-  # random crash on startup when asan is on if pie is enabled
-  if(NOT SANITIZE AND ANDROID AND NOT BUILD_GUI_DEPS STREQUAL "ON" OR IOS)
+  if(ANDROID AND NOT BUILD_GUI_DEPS STREQUAL "ON" OR IOS)
     #From Android 5: "only position independent executables (PIE) are supported" 
     message(STATUS "Enabling PIE executable")
     set(PIC_FLAG "")
@@ -857,7 +714,7 @@ else()
   endif()
 
   if(APPLE)
-    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fvisibility=default -DGTEST_HAS_TR1_TUPLE=0")
+    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DGTEST_HAS_TR1_TUPLE=0")
   endif()
 
   set(DEBUG_FLAGS "-g3")
@@ -867,9 +724,6 @@ else()
     set(DEBUG_FLAGS "${DEBUG_FLAGS} -O0 ")
   endif()
 
-  # At least some CLANGs default to not enough for monero
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -ftemplate-depth=900")
-
   if(NOT DEFINED USE_LTO_DEFAULT)
     set(USE_LTO_DEFAULT false)
   endif()
@@ -925,7 +779,6 @@ if (${BOOST_IGNORE_SYSTEM_PATHS} STREQUAL "ON")
 endif()
 
 set(OLD_LIB_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
-set(Boost_NO_BOOST_CMAKE ON)
 if(STATIC)
   if(MINGW)
     set(CMAKE_FIND_LIBRARY_SUFFIXES .a)
@@ -938,31 +791,20 @@ find_package(Boost 1.58 QUIET REQUIRED COMPONENTS system filesystem thread date_
 
 set(CMAKE_FIND_LIBRARY_SUFFIXES ${OLD_LIB_SUFFIXES})
 if(NOT Boost_FOUND)
-  die("Could not find Boost libraries, please make sure you have installed Boost or libboost-all-dev (>=1.58) or the equivalent")
+  die("Could not find Boost libraries, please make sure you have installed Boost or libboost-all-dev (1.58) or the equivalent")
 elseif(Boost_FOUND)
   message(STATUS "Found Boost Version: ${Boost_VERSION}")
-  if (Boost_VERSION VERSION_LESS 10 AND Boost_VERSION VERSION_LESS 1.62.0 AND NOT (OPENSSL_VERSION VERSION_LESS 1.1))
-    set(BOOST_BEFORE_1_62 true)
-  endif()
-  if (NOT Boost_VERSION VERSION_LESS 10 AND Boost_VERSION VERSION_LESS 106200 AND NOT (OPENSSL_VERSION VERSION_LESS 1.1))
-    set(BOOST_BEFORE_1_62 true)
-  endif()
-  if (BOOST_BEFORE_1_62)
-      message(FATAL_ERROR "Boost ${Boost_VERSION} (older than 1.62) is too old to link with OpenSSL ${OPENSSL_VERSION} (1.1 or newer) found at ${OPENSSL_INCLUDE_DIR} and ${OPENSSL_LIBRARIES}. "
+  if (Boost_VERSION VERSION_LESS 106200 AND NOT (OPENSSL_VERSION VERSION_LESS 1.1))
+      message(FATAL_ERROR "Boost older than 1.62 is too old to link with OpenSSL 1.1 or newer. "
                           "Update Boost or install OpenSSL 1.0 and set path to it when running cmake: "
-                          "cmake -DOPENSSL_ROOT_DIR='/usr/include/openssl-1.0'")
+                          "cmake -DOPENSSL_ROOT_DIR='/usr/include/openssl-1.0;/usr/lib/openssl-1.0'")
   endif()
 endif()
 
 include_directories(SYSTEM ${Boost_INCLUDE_DIRS})
 if(MINGW)
-  set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -Wa,-mbig-obj")
-  set(EXTRA_LIBRARIES mswsock;ws2_32;iphlpapi;crypt32;bcrypt)
-  if(DEPENDS)
-    set(ICU_LIBRARIES icuio icui18n icuuc icudata icutu iconv)
-  else()
-    set(ICU_LIBRARIES icuio icuin icuuc icudt icutu iconv)
-  endif()
+  set(EXTRA_LIBRARIES mswsock;ws2_32;iphlpapi)
+  set(ICU_LIBRARIES ${Boost_LOCALE_LIBRARY} icuio icuin icuuc icudt icutu iconv)
 elseif(APPLE OR OPENBSD OR ANDROID)
   set(EXTRA_LIBRARIES "")
 elseif(FREEBSD)
@@ -972,33 +814,15 @@ elseif(DRAGONFLY)
   set(EXTRA_LIBRARIES execinfo ${COMPAT})
 elseif(CMAKE_SYSTEM_NAME MATCHES "(SunOS|Solaris)")
   set(EXTRA_LIBRARIES socket nsl resolv)
-elseif(NOT MSVC AND NOT DEPENDS)
+elseif(NOT MSVC)
   find_library(RT rt)
   set(EXTRA_LIBRARIES ${RT})
 endif()
 
 list(APPEND EXTRA_LIBRARIES ${CMAKE_DL_LIBS})
 
-if (HIDAPI_FOUND OR LibUSB_COMPILE_TEST_PASSED)
-  if (APPLE)
-    if(DEPENDS)
-      list(APPEND EXTRA_LIBRARIES "-framework Foundation -framework AppKit -framework IOKit")
-    else()
-      find_library(COREFOUNDATION CoreFoundation)
-      find_library(APPKIT AppKit)
-      find_library(IOKIT IOKit)
-      list(APPEND EXTRA_LIBRARIES ${APPKIT})
-      list(APPEND EXTRA_LIBRARIES ${IOKIT})
-      list(APPEND EXTRA_LIBRARIES ${COREFOUNDATION})
-    endif()
-  endif()
-  if (WIN32)
-    list(APPEND EXTRA_LIBRARIES setupapi)
-  endif()
-endif()
-
 option(USE_READLINE "Build with GNU readline support." ON)
-if(USE_READLINE AND NOT DEPENDS)
+if(USE_READLINE)
   find_package(Readline)
   if(READLINE_FOUND AND GNU_READLINE_FOUND)
     add_definitions(-DHAVE_READLINE)
@@ -1008,37 +832,24 @@ if(USE_READLINE AND NOT DEPENDS)
   else()
     message(STATUS "Could not find GNU readline library so building without readline support")
   endif()
-elseif(USE_READLINE AND DEPENDS AND NOT MINGW)
-  find_path(Readline_INCLUDE_PATH readline/readline.h)
-  find_library(Readline_LIBRARY readline)
-  find_library(Terminfo_LIBRARY tinfo)
-  set(Readline_LIBRARY "${Readline_LIBRARY};${Terminfo_LIBRARY}")
-  set(GNU_READLINE_LIBRARY ${Readline_LIBRARY})
-  add_definitions(-DHAVE_READLINE)
-  set(EPEE_READLINE epee_readline)
 endif()
 
 if(ANDROID)
   set(ATOMIC libatomic.a)
-  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-error=user-defined-warnings")
 endif()
 if(CMAKE_C_COMPILER_ID STREQUAL "Clang" AND ARCH_WIDTH EQUAL "32" AND NOT IOS AND NOT FREEBSD)
   find_library(ATOMIC atomic)
-  if (ATOMIC_FOUND)
-    list(APPEND EXTRA_LIBRARIES ${ATOMIC})
-  endif()
+  list(APPEND EXTRA_LIBRARIES ${ATOMIC})
 endif()
 
-find_path(ZMQ_INCLUDE_PATH zmq.h)
+find_path(ZMQ_INCLUDE_PATH zmq.hpp)
 find_library(ZMQ_LIB zmq)
 find_library(PGM_LIBRARY pgm)
 find_library(NORM_LIBRARY norm)
-find_library(GSSAPI_LIBRARY gssapi_krb5)
-find_library(PROTOLIB_LIBRARY protolib)
 find_library(SODIUM_LIBRARY sodium)
 
 if(NOT ZMQ_INCLUDE_PATH)
-  message(FATAL_ERROR "Could not find required header zmq.h")
+  message(FATAL_ERROR "Could not find required header zmq.hpp")
 endif()
 if(NOT ZMQ_LIB)
   message(FATAL_ERROR "Could not find required libzmq")
@@ -1049,32 +860,15 @@ endif()
 if(NORM_LIBRARY)
   set(ZMQ_LIB "${ZMQ_LIB};${NORM_LIBRARY}")
 endif()
-if(GSSAPI_LIBRARY)
-  set(ZMQ_LIB "${ZMQ_LIB};${GSSAPI_LIBRARY}")
-endif()
-if(PROTOLIB_LIBRARY)
-  set(ZMQ_LIB "${ZMQ_LIB};${PROTOLIB_LIBRARY}")
-endif()
 if(SODIUM_LIBRARY)
   set(ZMQ_LIB "${ZMQ_LIB};${SODIUM_LIBRARY}")
 endif()
 
-include(external/supercop/functions.cmake) # place after setting flags and before src directory inclusion
 add_subdirectory(contrib)
 add_subdirectory(src)
 
-find_package(PythonInterp)
 if(BUILD_TESTS)
-  message(STATUS "Building tests")
   add_subdirectory(tests)
-else()
-  message(STATUS "Not building tests")
-endif()
-
-if(BUILD_DEBUG_UTILITIES)
-  message(STATUS "Building debug utilities")
-else()
-  message(STATUS "Not building debug utilities")
 endif()
 
 if(BUILD_DOCUMENTATION)
@@ -1108,13 +902,3 @@ option(INSTALL_VENDORED_LIBUNBOUND "Install libunbound binary built from source
 
 
 CHECK_C_COMPILER_FLAG(-std=c11 HAVE_C11)
-
-find_package(PythonInterp)
-find_program(iwyu_tool_path NAMES iwyu_tool.py iwyu_tool)
-if (iwyu_tool_path AND PYTHONINTERP_FOUND)
-  add_custom_target(iwyu
-    COMMAND "${PYTHON_EXECUTABLE}" "${iwyu_tool_path}" -p "${CMAKE_BINARY_DIR}" -- --no_fwd_decls
-    COMMENT "Running include-what-you-use tool"
-    VERBATIM
-  )
-endif()

CMakeLists_IOS.txt

@@ -1,4 +1,4 @@
-# Portions Copyright (c) 2017-2020, The Monero Project
+# Portions Copyright (c) 2017-2018, The Monero Project
 # This file is based off of the https://code.google.com/archive/p/ios-cmake/
 # It has been altered for Monero iOS development
 #

CONTRIBUTING.md

@@ -1,7 +1,7 @@
 # Contributing to Monero
 
 A good way to help is to test, and report bugs. See
-[How to Report Bugs Effectively (by Simon Tatham)](https://www.chiark.greenend.org.uk/~sgtatham/bugs.html)
+[How to Report Bugs Effectively (by Simon Tatham)](http://www.chiark.greenend.org.uk/~sgtatham/bugs.html)
 if you want to help that way. Testing is invaluable in making a piece
 of software solid and usable.
 
@@ -19,8 +19,7 @@ posted to #monero-dev on irc.freenode.net).
 
 Patches should be self contained. A good rule of thumb is to have
 one patch per separate issue, feature, or logical change. Also, no
-other changes, such as random whitespace changes, reindentation,
-or fixing typoes, spelling, or wording, unless user visible.
+other changes, such as random whitespace changes or reindentation.
 Following the code style of the particular chunk of code you're
 modifying is encouraged. Proper squashing should be done (eg, if
 you're making a buggy patch, then a later patch to fix the bug,
@@ -88,26 +87,26 @@ C4 is meant to provide a reusable optimal collaboration model for open source so
 
 ### Preliminaries
 
-- The project MUST use the git distributed revision control system.
-- The project MUST be hosted on github.com or equivalent, herein called the "Platform".
-- The project MUST use the Platform issue tracker.
+- The project SHALL use the git distributed revision control system.
+- The project SHALL be hosted on github.com or equivalent, herein called the "Platform".
+- The project SHALL use the Platform issue tracker.
   - Non-GitHub example:
     - "Platform" could be a vanilla git repo and Trac hosted on the same machine/network.
     - The Platform issue tracker would be Trac.
 - The project SHOULD have clearly documented guidelines for code style.
 - A "Contributor" is a person who wishes to provide a patch, being a set of commits that solve some clearly identified problem.
 - A "Maintainer" is a person who merges patches to the project. Maintainers are not developers; their job is to enforce process.
-- Contributors MUST NOT have commit access to the repository unless they are also Maintainers.
-- Maintainers MUST have commit access to the repository.
-- Everyone, without distinction or discrimination, MUST have an equal right to become a Contributor under the terms of this contract.
+- Contributors SHALL NOT have commit access to the repository unless they are also Maintainers.
+- Maintainers SHALL have commit access to the repository.
+- Everyone, without distinction or discrimination, SHALL have an equal right to become a Contributor under the terms of this contract.
 
 ### Licensing and ownership
 
-- The project MUST use a share-alike license, such as BSD-3, the GPLv3 or a variant thereof (LGPL, AGPL), or the MPLv2.
-- All contributions to the project source code ("patches") MUST use the same license as the project.
-- All patches are owned by their authors. There MUST NOT be any copyright assignment process.
-- The copyrights in the project MUST be owned collectively by all its Contributors.
-- Each Contributor MUST be responsible for identifying themselves in the project Contributor list.
+- The project SHALL use a share-alike license, such as BSD-3, the GPLv3 or a variant thereof (LGPL, AGPL), or the MPLv2.
+- All contributions to the project source code ("patches") SHALL use the same license as the project.
+- All patches are owned by their authors. There SHALL NOT be any copyright assignment process.
+- The copyrights in the project SHALL be owned collectively by all its Contributors.
+- Each Contributor SHALL be responsible for identifying themselves in the project Contributor list.
 
 ### Patch requirements
 
@@ -116,27 +115,27 @@ C4 is meant to provide a reusable optimal collaboration model for open source so
 - A patch SHOULD be a minimal and accurate answer to exactly one identified and agreed problem.
 - A patch MUST adhere to the code style guidelines of the project if these are defined.
 - A patch MUST adhere to the "Evolution of Public Contracts" guidelines defined below.
-- A patch MUST NOT include non-trivial code from other projects unless the Contributor is the original author of that code.
+- A patch SHALL NOT include non-trivial code from other projects unless the Contributor is the original author of that code.
 - A patch MUST compile cleanly and pass project self-tests on at least the principle target platform.
 - A patch commit message SHOULD consist of a single short (less than 50 character) line summarizing the change, optionally followed by a blank line and then a more thorough description.
 - A "Correct Patch" is one that satisfies the above requirements.
 
 ### Development process
 
-- Change on the project MUST be governed by the pattern of accurately identifying problems and applying minimal, accurate solutions to these problems.
+- Change on the project SHALL be governed by the pattern of accurately identifying problems and applying minimal, accurate solutions to these problems.
 - To request changes, a user SHOULD log an issue on the project Platform issue tracker.
 - The user or Contributor SHOULD write the issue by describing the problem they face or observe.
 - The user or Contributor SHOULD seek consensus on the accuracy of their observation, and the value of solving the problem.
-- Users MUST NOT log feature requests, ideas, or suggestions unrelated to Monero code or Monero's dependency code or Monero's potential/future dependency code or research which successfully implements Monero.
-- Users MUST NOT log any solutions to problems (verifiable or hypothetical) of which are not explicitly documented and/or not provable and/or cannot be reasonably proven.
-- Thus, the release history of the project MUST be a list of meaningful issues logged and solved.
-- To work on an issue, a Contributor MUST fork the project repository and then work on their forked repository.
-- To submit a patch, a Contributor MUST create a Platform pull request back to the project.
-- A Contributor MUST NOT commit changes directly to the project.
+- Users SHALL NOT log feature requests, ideas, or suggestions unrelated to Monero code or Monero's dependency code or Monero's potential/future dependency code or research which successfully implements Monero.
+- Users SHALL NOT log any solutions to problems (verifiable or hypothetical) of which are not explicitly documented and/or not provable and/or cannot be reasonably proven.
+- Thus, the release history of the project SHALL be a list of meaningful issues logged and solved.
+- To work on an issue, a Contributor SHALL fork the project repository and then work on their forked repository.
+- To submit a patch, a Contributor SHALL create a Platform pull request back to the project.
+- A Contributor SHALL NOT commit changes directly to the project.
 - To discuss a patch, people MAY comment on the Platform pull request, on the commit, or elsewhere.
-- To accept or reject a patch, a Maintainer MUST use the Platform interface.
+- To accept or reject a patch, a Maintainer SHALL use the Platform interface.
 - Maintainers SHOULD NOT merge their own patches except in exceptional cases, such as non-responsiveness from other Maintainers for an extended period (more than 30 days) or unless urgent as defined by the Monero Maintainers Team.
-- Maintainers MUST NOT make value judgments on correct patches unless the Maintainer (as may happen in rare circumstances) is a core code developer.
+- Maintainers SHALL NOT make value judgments on correct patches unless the Maintainer (as may happen in rare circumstances) is a core code developer.
 - Maintainers MUST NOT merge pull requests in less than 168 hours (1 week) unless deemed urgent by at least 2 people from the Monero Maintainer Team.
 - The Contributor MAY tag an issue as "Ready" after making a pull request for the issue.
 - The user who created an issue SHOULD close the issue after checking the patch is successful.
@@ -146,27 +145,27 @@ C4 is meant to provide a reusable optimal collaboration model for open source so
 
 ### Creating stable releases
 
-- The project MUST have one branch ("master") that always holds the latest in-progress version and SHOULD always build.
-- The project MUST NOT use topic branches for any reason. Personal forks MAY use topic branches.
-- To make a stable release someone MUST fork the repository by copying it and thus become maintainer of this repository.
+- The project SHALL have one branch ("master") that always holds the latest in-progress version and SHOULD always build.
+- The project SHALL NOT use topic branches for any reason. Personal forks MAY use topic branches.
+- To make a stable release someone SHALL fork the repository by copying it and thus become maintainer of this repository.
 - Forking a project for stabilization MAY be done unilaterally and without agreement of project maintainers.
-- A patch to a stabilization project declared "stable" MUST be accompanied by a reproducible test case.
+- A patch to a stabilization project declared "stable" SHALL be accompanied by a reproducible test case.
 
 ### Evolution of public contracts
 
-- All Public Contracts (APIs or protocols) MUST be documented.
+- All Public Contracts (APIs or protocols) SHALL be documented.
 - All Public Contracts SHOULD have space for extensibility and experimentation.
 - A patch that modifies a stable Public Contract SHOULD not break existing applications unless there is overriding consensus on the value of doing this.
 - A patch that introduces new features to a Public Contract SHOULD do so using new names.
 - Old names SHOULD be deprecated in a systematic fashion by marking new names as "experimental" until they are stable, then marking the old names as "deprecated".
 - When sufficient time has passed, old deprecated names SHOULD be marked "legacy" and eventually removed.
-- Old names MUST NOT be reused by new features.
+- Old names SHALL NOT be reused by new features.
 - When old names are removed, their implementations MUST provoke an exception (assertion) if used by applications.
 
 ### Project administration
 
-- The project founders MUST act as Administrators to manage the set of project Maintainers.
-- The Administrators MUST ensure their own succession over time by promoting the most effective Maintainers.
-- A new Contributor who makes a correct patch MUST be invited to become a Maintainer.
+- The project founders SHALL act as Administrators to manage the set of project Maintainers.
+- The Administrators SHALL ensure their own succession over time by promoting the most effective Maintainers.
+- A new Contributor who makes a correct patch SHALL be invited to become a Maintainer.
 - Administrators MAY remove Maintainers who are inactive for an extended period of time, or who repeatedly fail to apply this process accurately.
 - Administrators SHOULD block or ban "bad actors" who cause stress and pain to others in the project. This should be done after public discussion, with a chance for all parties to speak. A bad actor is someone who repeatedly ignores the rules and culture of the project, who is needlessly argumentative or hostile, or who is offensive, and who is unable to self-correct their behavior when asked to do so by others.

Dockerfile

@@ -1,223 +1,117 @@
-ARG DEBIAN_VERSION="${DEBIAN_VERSION:-stable-slim}"
-FROM debian:${DEBIAN_VERSION} as git-wow
+# Multistage docker build, requires docker 17.05
 
-WORKDIR /data
+# builder stage
+FROM ubuntu:16.04 as builder
 
-#Cmake
-ARG CMAKE_VERSION=3.14.6
-ARG CMAKE_VERSION_DOT=v3.14
-ARG CMAKE_HASH=4e8ea11cabe459308671b476469eace1622e770317a15951d7b55a82ccaaccb9
-## Boost
-ARG BOOST_VERSION=1_70_0
-ARG BOOST_VERSION_DOT=1.70.0
-ARG BOOST_HASH=430ae8354789de4fd19ee52f3b1f739e1fba576f0aded0897c3c2bc00fb38778
-
-ENV CFLAGS='-fPIC -O2 -g'
-ENV CXXFLAGS='-fPIC -O2 -g'
-ENV LDFLAGS='-static-libstdc++'
-
-ENV BASE_DIR /usr/local
-
-RUN apt-get update -qq && apt-get --no-install-recommends -yqq install \
+RUN apt-get update && \
+    apt-get --no-install-recommends --yes install \
         ca-certificates \
+        cmake \
         g++ \
         make \
         pkg-config \
+        graphviz \
+        doxygen \
         git \
         curl \
         libtool-bin \
         autoconf \
-        automake \
-        bzip2 \
-        xsltproc \
-        gperf \
-        unzip > /dev/null \
-    && cd /data || exit 1 \
-    && echo "\e[32mbuilding: Cmake\e[39m" \
-    && set -ex \
-    && curl -s -O https://cmake.org/files/${CMAKE_VERSION_DOT}/cmake-${CMAKE_VERSION}.tar.gz > /dev/null \
-    && echo "${CMAKE_HASH}  cmake-${CMAKE_VERSION}.tar.gz" | sha256sum -c \
-    && tar -xzf cmake-${CMAKE_VERSION}.tar.gz > /dev/null \
-    && cd cmake-${CMAKE_VERSION} || exit 1 \
-    && echo "\e[32mmatrix style build text redirected to /dev/null. This will take some time. Go ahead make some coffee and check your emails.\e[39m" \
-    && ./configure --prefix=$BASE_DIR > /dev/null \
-    && make > /dev/null \
-    && make install > /dev/null \
-    && cd /data || exit 1 \
-    && rm -rf /data/cmake-${CMAKE_VERSION} \
-    && rm -rf /data/cmake-${CMAKE_VERSION}.tar.gz \
-    && echo "\e[32mbuilding: Boost\e[39m" \
-    && set -ex \
-    && curl -s -L -o  boost_${BOOST_VERSION}.tar.bz2 https://dl.bintray.com/boostorg/release/${BOOST_VERSION_DOT}/source/boost_${BOOST_VERSION}.tar.bz2 > /dev/null \
-    && echo "${BOOST_HASH}  boost_${BOOST_VERSION}.tar.bz2" | sha256sum -c \
-    && tar -xvf boost_${BOOST_VERSION}.tar.bz2 > /dev/null \
-    && cd boost_${BOOST_VERSION} || exit 1 \
-    && ./bootstrap.sh > /dev/null \
-    && ./b2 -a install --prefix=$BASE_DIR --build-type=minimal link=static runtime-link=static --with-chrono --with-date_time --with-filesystem --with-program_options --with-regex --with-serialization --with-system --with-thread --with-locale threading=multi threadapi=pthread cflags="$CFLAGS" cxxflags="$CXXFLAGS" stage > /dev/null \
-    && cd /data || exit 1 \
-    && rm -rf /data/boost_${BOOST_VERSION} \
-    && rm -rf /data/boost_${BOOST_VERSION}.tar.bz2
+        automake
 
-WORKDIR /data
-ENV BASE_DIR /usr/local
+WORKDIR /usr/local
+
+## Boost
+ARG BOOST_VERSION=1_66_0
+ARG BOOST_VERSION_DOT=1.66.0
+ARG BOOST_HASH=5721818253e6a0989583192f96782c4a98eb6204965316df9f5ad75819225ca9
+RUN curl -s -L -o  boost_${BOOST_VERSION}.tar.bz2 https://dl.bintray.com/boostorg/release/${BOOST_VERSION_DOT}/source/boost_${BOOST_VERSION}.tar.bz2 \
+    && echo "${BOOST_HASH} boost_${BOOST_VERSION}.tar.bz2" | sha256sum -c \
+    && tar -xvf boost_${BOOST_VERSION}.tar.bz2 \
+    && cd boost_${BOOST_VERSION} \
+    && ./bootstrap.sh \
+    && ./b2 --build-type=minimal link=static runtime-link=static --with-chrono --with-date_time --with-filesystem --with-program_options --with-regex --with-serialization --with-system --with-thread --with-locale threading=multi threadapi=pthread cflags="-fPIC" cxxflags="-fPIC" stage
+ENV BOOST_ROOT /usr/local/boost_${BOOST_VERSION}
 
 # OpenSSL
-ARG OPENSSL_VERSION=1.1.1
-ARG OPENSSL_FIX=g
-ARG OPENSSL_HASH=ddb04774f1e32f0c49751e21b67216ac87852ceb056b75209af2443400636d46
+ARG OPENSSL_VERSION=1.0.2n
+ARG OPENSSL_HASH=370babb75f278c39e0c50e8c4e7493bc0f18db6867478341a832a982fd15a8fe
+RUN curl -s -O https://www.openssl.org/source/openssl-${OPENSSL_VERSION}.tar.gz \
+    && echo "${OPENSSL_HASH} openssl-${OPENSSL_VERSION}.tar.gz" | sha256sum -c \
+    && tar -xzf openssl-${OPENSSL_VERSION}.tar.gz \
+    && cd openssl-${OPENSSL_VERSION} \
+    && ./Configure linux-x86_64 no-shared --static -fPIC \
+    && make build_crypto build_ssl \
+    && make install
+ENV OPENSSL_ROOT_DIR=/usr/local/openssl-${OPENSSL_VERSION}
+
 # ZMQ
-ARG ZMQ_VERSION=v4.3.2
-ARG ZMQ_HASH=a84ffa12b2eb3569ced199660bac5ad128bff1f0
-# zmq.hpp
-ARG CPPZMQ_VERSION=v4.4.1
-ARG CPPZMQ_HASH=f5b36e563598d48fcc0d82e589d3596afef945ae
-# Readline
-ARG READLINE_VERSION=8.0
-ARG READLINE_HASH=e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461
-# Sodium
-ARG SODIUM_VERSION=1.0.18
-ARG SODIUM_HASH=4f5e89fa84ce1d178a6765b8b46f2b6f91216677
-
-ENV CFLAGS='-fPIC -O2 -g'
-ENV CXXFLAGS='-fPIC -O2 -g'
-ENV LDFLAGS='-static-libstdc++'
-
-RUN echo "\e[32mbuilding: Openssl\e[39m" \
-    && set -ex \
-    && curl -s -O https://www.openssl.org/source/openssl-${OPENSSL_VERSION}${OPENSSL_FIX}.tar.gz > /dev/null \
-    # && curl -s -O https://www.openssl.org/source/old/${OPENSSL_VERSION}/openssl-${OPENSSL_VERSION}${OPENSSL_FIX}.tar.gz > /dev/null \
-    && echo "${OPENSSL_HASH}  openssl-${OPENSSL_VERSION}${OPENSSL_FIX}.tar.gz" | sha256sum -c \
-    && tar -xzf openssl-${OPENSSL_VERSION}${OPENSSL_FIX}.tar.gz > /dev/null \
-    && cd openssl-${OPENSSL_VERSION}${OPENSSL_FIX} || exit 1 \
-    && ./Configure --prefix=$BASE_DIR linux-x86_64 no-shared --static "$CFLAGS" > /dev/null \
-    && make build_generated > /dev/null \
-    && make libcrypto.a > /dev/null \
-    && echo "\e[32mblah, blah, shared libraries from the glib, something, something. Don't worry about it.\e[39m" \
-    && make install > /dev/null \
-    && cd /data || exit 1 \
-    && rm -rf /data/openssl-${OPENSSL_VERSION}${OPENSSL_FIX} \
-    && rm -rf /data/openssl-${OPENSSL_VERSION}${OPENSSL_FIX}.tar.gz \
-    && echo "\e[32mbuilding: ZMQ\e[39m" \
-    && set -ex \
-    && git clone --branch ${ZMQ_VERSION} --single-branch --depth 1 https://github.com/zeromq/libzmq.git > /dev/null \
-    && cd libzmq || exit 1 \
+ARG ZMQ_VERSION=v4.2.3
+ARG ZMQ_HASH=3226b8ebddd9c6c738ba42986822c26418a49afb
+RUN git clone https://github.com/zeromq/libzmq.git -b ${ZMQ_VERSION} \
+    && cd libzmq \
     && test `git rev-parse HEAD` = ${ZMQ_HASH} || exit 1 \
-    && ./autogen.sh > /dev/null \
-    && ./configure --prefix=$BASE_DIR --enable-libunwind=no --enable-static --disable-shared > /dev/null \
-    && make > /dev/null \
-    && make install > /dev/null \
-    && ldconfig > /dev/null \
-    && cd /data || exit 1 \
-    && rm -rf /data/libzmq \
-    && echo "\e[32mbuilding: zmq.hpp\e[39m" \
-    && set -ex \
-    && git clone --branch ${CPPZMQ_VERSION} --single-branch --depth 1 https://github.com/zeromq/cppzmq.git > /dev/null \
-    && cd cppzmq || exit 1 \
+    && ./autogen.sh \
+    && CFLAGS="-fPIC" CXXFLAGS="-fPIC" ./configure --enable-static --disable-shared \
+    && make \
+    && make install \
+    && ldconfig
+
+# zmq.hpp
+ARG CPPZMQ_HASH=6aa3ab686e916cb0e62df7fa7d12e0b13ae9fae6
+RUN git clone https://github.com/zeromq/cppzmq.git -b ${ZMQ_VERSION} \
+    && cd cppzmq \
     && test `git rev-parse HEAD` = ${CPPZMQ_HASH} || exit 1 \
-    && mv *.hpp $BASE_DIR/include \
-    && cd /data || exit 1 \
-    && rm -rf /data/cppzmq \
-    && echo "\e[32mbuilding: Readline\e[39m" \
-    && set -ex \
-    && curl -s -O https://ftp.gnu.org/gnu/readline/readline-${READLINE_VERSION}.tar.gz > /dev/null \
-    && echo "${READLINE_HASH}  readline-${READLINE_VERSION}.tar.gz" | sha256sum -c \
-    && tar -xzf readline-${READLINE_VERSION}.tar.gz > /dev/null \
-    && cd readline-${READLINE_VERSION} || exit 1 \
-    && ./configure --prefix=$BASE_DIR > /dev/null \
-    && make > /dev/null \
-    && make install > /dev/null \
-    && cd /data || exit 1 \
-    && rm -rf /data/readline-${READLINE_VERSION} \
-    && rm -rf readline-${READLINE_VERSION}.tar.gz \
-    && echo "\e[32mbuilding: Sodium\e[39m" \
-    && set -ex \
-    && git clone --branch ${SODIUM_VERSION} --single-branch --depth 1 https://github.com/jedisct1/libsodium.git > /dev/null \
-    && cd libsodium || exit 1 \
+    && mv *.hpp /usr/local/include
+
+# Readline
+ARG READLINE_VERSION=7.0
+ARG READLINE_HASH=750d437185286f40a369e1e4f4764eda932b9459b5ec9a731628393dd3d32334
+RUN curl -s -O https://ftp.gnu.org/gnu/readline/readline-${READLINE_VERSION}.tar.gz \
+    && echo "${READLINE_HASH} readline-${READLINE_VERSION}.tar.gz" | sha256sum -c \
+    && tar -xzf readline-${READLINE_VERSION}.tar.gz \
+    && cd readline-${READLINE_VERSION} \
+    && CFLAGS="-fPIC" CXXFLAGS="-fPIC" ./configure \
+    && make \
+    && make install
+
+# Sodium
+ARG SODIUM_VERSION=1.0.16
+ARG SODIUM_HASH=675149b9b8b66ff44152553fb3ebf9858128363d
+RUN git clone https://github.com/jedisct1/libsodium.git -b ${SODIUM_VERSION} \
+    && cd libsodium \
     && test `git rev-parse HEAD` = ${SODIUM_HASH} || exit 1 \
     && ./autogen.sh \
-    && ./configure --prefix=$BASE_DIR > /dev/null \
-    && make > /dev/null \
-    && make check > /dev/null \
-    && make install > /dev/null \
-    && cd /data || exit 1 \
-    && rm -rf /data/libsodium
+    && CFLAGS="-fPIC" CXXFLAGS="-fPIC" ./configure \
+    && make \
+    && make check \
+    && make install
 
-WORKDIR /data
-ENV BASE_DIR /usr/local
+WORKDIR /src
+COPY . .
 
-# Udev
-ARG UDEV_VERSION=v3.2.8
-ARG UDEV_HASH=d69f3f28348123ab7fa0ebac63ec2fd16800c5e0
-# Libusb
-ARG USB_VERSION=v1.0.22
-ARG USB_HASH=0034b2afdcdb1614e78edaa2a9e22d5936aeae5d
-# Hidapi
-ARG HIDAPI_VERSION=hidapi-0.8.0-rc1
-ARG HIDAPI_HASH=40cf516139b5b61e30d9403a48db23d8f915f52c
-# Protobuf
-ARG PROTOBUF_VERSION=v3.7.1
-ARG PROTOBUF_HASH=6973c3a5041636c1d8dc5f7f6c8c1f3c15bc63d6
+ARG NPROC
+RUN rm -rf build && \
+    if [ -z "$NPROC" ];then make -j$(nproc) release-static;else make -j$NPROC release-static;fi
 
-ENV CFLAGS='-fPIC -O2 -g'
-ENV CXXFLAGS='-fPIC -O2 -g'
-ENV LDFLAGS='-static-libstdc++'
+# runtime stage
+FROM ubuntu:16.04
 
-RUN echo "\e[32mbuilding: Udev\e[39m" \
-    && set -ex \
-    && git clone --branch ${UDEV_VERSION} --single-branch --depth 1 https://github.com/gentoo/eudev > /dev/null \
-    && cd eudev || exit 1 \
-    && test `git rev-parse HEAD` = ${UDEV_HASH} || exit 1 \
-    && ./autogen.sh \
-    && ./configure --prefix=$BASE_DIR --disable-gudev --disable-introspection --disable-hwdb --disable-manpages --disable-shared > /dev/null \
-    && make > /dev/null \
-    && make install > /dev/null \
-    && cd /data || exit 1 \
-    && rm -rf /data/eudev \
-    && echo "\e[32mbuilding: Libusb. Ahh, a dependency that shouldn't have been included in the codebase. Hardware wallets are way overrated.\e[39m" \
-    && set -ex \
-    && git clone --branch ${USB_VERSION} --single-branch --depth 1 https://github.com/libusb/libusb.git > /dev/null \
-    && cd libusb || exit 1 \
-    && test `git rev-parse HEAD` = ${USB_HASH} || exit 1 \
-    && ./autogen.sh > /dev/null \
-    && ./configure --prefix=$BASE_DIR --disable-shared > /dev/null \
-    && make > /dev/null \
-    && make install > /dev/null \
-    && cd /data || exit 1 \
-    && rm -rf /data/libusb \
-    && echo "\e[32mbuilding: Hidapi\e[39m" \
-    && set -ex \
-    && git clone --branch ${HIDAPI_VERSION} --single-branch --depth 1 https://github.com/signal11/hidapi > /dev/null \
-    && cd hidapi || exit 1 \
-    && test `git rev-parse HEAD` = ${HIDAPI_HASH} || exit 1 \
-    && ./bootstrap \
-    && ./configure --prefix=$BASE_DIR --enable-static --disable-shared > /dev/null \
-    && make > /dev/null \
-    && make install > /dev/null \
-    && cd /data || exit 1 \
-    && rm -rf /data/hidapi \
-    && echo "\e[32mbuilding: Protobuf <- fuck you protobuf, you worthless piece of shit!\e[39m" \
-    && set -ex \
-    && git clone --branch ${PROTOBUF_VERSION}  --single-branch --depth 1 https://github.com/protocolbuffers/protobuf > /dev/null \
-    && cd protobuf || exit 1 \
-    && test `git rev-parse HEAD` = ${PROTOBUF_HASH} || exit 1 \
-    && git submodule update --init --recursive > /dev/null \
-    && ./autogen.sh > /dev/null \
-    && ./configure --prefix=$BASE_DIR --enable-static --disable-shared > /dev/null \
-    && make > /dev/null \
-    && make install > /dev/null \
-    && ldconfig \
-    && cd /data || exit 1 \
-    && rm -rf /data/protobuf
+RUN apt-get update && \
+    apt-get --no-install-recommends --yes install ca-certificates && \
+    apt-get clean && \
+    rm -rf /var/lib/apt
 
-WORKDIR /home
-ENV USE_SINGLE_BUILDDIR=1
-EXPOSE 34567
-EXPOSE 34568
+COPY --from=builder /src/build/release/bin/* /usr/local/bin/
 
-# Wownero
-RUN echo "\e[32mbuilding: Wownero\e[39m" \
-    && set -ex \
-    && git clone https://git.wownero.com/wownero/wownero \
-    && cd wownero \
-    && make -j2 release-static-linux-x86_64 \
-    && echo "\e[32mdone building Wownero, binaries located in: /home/wownero/build/release/bin\e[39m"
+# Contains the blockchain
+VOLUME /root/.bitmonero
+
+# Generate your wallet via accessing the container and run:
+# cd /wallet
+# monero-wallet-cli
+VOLUME /wallet
+
+EXPOSE 18080
+EXPOSE 18081
+
+ENTRYPOINT ["monerod", "--p2p-bind-ip=0.0.0.0", "--p2p-bind-port=18080", "--rpc-bind-ip=0.0.0.0", "--rpc-bind-port=18081", "--non-interactive", "--confirm-external-bind"] 

Doxyfile

@@ -20,7 +20,7 @@
 # This tag specifies the encoding used for all characters in the config file
 # that follow. The default is UTF-8 which is also the encoding used for all text
 # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See https://www.gnu.org/software/libiconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
 # for the list of possible encodings.
 # The default value is: UTF-8.
 
@@ -285,7 +285,7 @@ EXTENSION_MAPPING      =
 
 # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
 # according to the Markdown format, which allows for more readable
-# documentation. See https://daringfireball.net/projects/markdown/ for details.
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
 # The output of markdown processing is further processed by doxygen, so you can
 # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
 # case of backward compatibilities issues.
@@ -318,7 +318,7 @@ BUILTIN_STL_SUPPORT    = NO
 CPP_CLI_SUPPORT        = NO
 
 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# https://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
 # will parse them like normal C++ but will assume all classes use public instead
 # of private inheritance when no explicit protection keyword is present.
 # The default value is: NO.
@@ -677,7 +677,7 @@ LAYOUT_FILE            =
 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
 # the reference definitions. This must be a list of .bib files. The .bib
 # extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
 # For LaTeX the style of the bibliography can be controlled using
 # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
 # search path. Do not use file names with spaces, bibtex cannot handle them. See
@@ -759,7 +759,7 @@ INPUT                  = src
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: https://www.gnu.org/software/libiconv) for the list of
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
 # possible encodings.
 # The default value is: UTF-8.
 
@@ -951,7 +951,7 @@ SOURCE_TOOLTIPS        = YES
 # If the USE_HTAGS tag is set to YES then the references to source code will
 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
 # source browser. The htags tool is part of GNU's global source tagging system
-# (see https://www.gnu.org/software/global/global.html). You will need version
+# (see http://www.gnu.org/software/global/global.html). You will need version
 # 4.8.6 or higher.
 #
 # To use it do the following:
@@ -1094,7 +1094,7 @@ HTML_EXTRA_FILES       =
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
 # will adjust the colors in the stylesheet and background images according to
 # this color. Hue is specified as an angle on a colorwheel, see
-# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
 # purple, and 360 is red again.
 # Minimum value: 0, maximum value: 359, default value: 220.
@@ -1152,12 +1152,12 @@ HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
 # generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: https://developer.apple.com/tools/xcode/), introduced with
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
 # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
 # Makefile in the HTML output directory. Running make will produce the docset in
 # that directory and running make install will install the docset in
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See https://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
 # for more information.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1197,7 +1197,7 @@ DOCSET_PUBLISHER_NAME  = Publisher
 # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
 # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
 # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
 # Windows.
 #
 # The HTML Help Workshop contains a compiler that can convert all HTML output
@@ -1273,7 +1273,7 @@ QCH_FILE               =
 
 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
-# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1281,7 +1281,7 @@ QHP_NAMESPACE          = org.doxygen.Project
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
 # folders).
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.
@@ -1290,7 +1290,7 @@ QHP_VIRTUAL_FOLDER     = doc
 
 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
 # filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1298,7 +1298,7 @@ QHP_CUST_FILTER_NAME   =
 
 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
 # filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1306,7 +1306,7 @@ QHP_CUST_FILTER_ATTRS  =
 
 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
 # project's filter section matches. Qt Help Project / Filter Attributes (see:
-# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes).
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_SECT_FILTER_ATTRS  =
@@ -1411,7 +1411,7 @@ FORMULA_FONTSIZE       = 10
 FORMULA_TRANSPARENT    = YES
 
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# https://www.mathjax.org) which uses client side Javascript for the rendering
+# http://www.mathjax.org) which uses client side Javascript for the rendering
 # instead of using prerendered bitmaps. Use this if you do not have LaTeX
 # installed or if you want to formulas look prettier in the HTML output. When
 # enabled you may also need to install MathJax separately and configure the path
@@ -1423,7 +1423,7 @@ USE_MATHJAX            = NO
 
 # When MathJax is enabled you can set the default output format to be used for
 # the MathJax output. See the MathJax site (see:
-# https://docs.mathjax.org/en/latest/output.html) for more details.
+# http://docs.mathjax.org/en/latest/output.html) for more details.
 # Possible values are: HTML-CSS (which is slower, but has the best
 # compatibility), NativeMML (i.e. MathML) and SVG.
 # The default value is: HTML-CSS.
@@ -1438,11 +1438,11 @@ MATHJAX_FORMAT         = HTML-CSS
 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
 # Content Delivery Network so you can quickly see the result without installing
 # MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from https://www.mathjax.org before deployment.
-# The default value is: https://cdn.mathjax.org/mathjax/latest.
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
-MATHJAX_RELPATH        = https://cdn.mathjax.org/mathjax/latest
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
 
 # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
 # extension names that should be enabled during MathJax rendering. For example
@@ -1453,7 +1453,7 @@ MATHJAX_EXTENSIONS     =
 
 # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
 # of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: https://docs.mathjax.org/en/latest/output.html) for more details. For an
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
 # example see the documentation.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
@@ -1500,7 +1500,7 @@ SERVER_BASED_SEARCH    = NO
 #
 # Doxygen ships with an example indexer ( doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/).
+# Xapian (see: http://xapian.org/).
 #
 # See the section "External Indexing and Searching" for details.
 # The default value is: NO.
@@ -1513,7 +1513,7 @@ EXTERNAL_SEARCH        = NO
 #
 # Doxygen ships with an example indexer ( doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/). See the section "External Indexing and
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
 # Searching" for details.
 # This tag requires that the tag SEARCHENGINE is set to YES.
 
@@ -1684,7 +1684,7 @@ LATEX_SOURCE_CODE      = NO
 
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
 # bibliography, e.g. plainnat, or ieeetr. See
-# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
 # The default value is: plain.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -2051,7 +2051,7 @@ HIDE_UNDOC_RELATIONS   = YES
 
 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
 # available from the path. This tool is part of Graphviz (see:
-# https://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
 # Bell Labs. The other options in this section have no effect if this option is
 # set to NO
 # The default value is: NO.

LEVIN_PROTOCOL.md

@@ -1,165 +0,0 @@
-# Levin Protocol
-This is a document explaining the current design of the levin protocol, as
-used by Monero. The protocol is largely inherited from cryptonote, but has
-undergone some changes.
-
-This document also may differ from the `struct bucket_head2` in Monero's
-code slightly - the spec here is slightly more strict to allow for
-extensibility.
-
-One of the goals of this document is to clearly indicate what is being sent
-"on the wire" to identify metadata that could de-anonymize users over I2P/Tor.
-These issues will be addressed as they are found. See `ANONMITY_NETWORKS.md` in
-the top-level folder for any outstanding issues.
-
-> This document does not currently list all data being sent by the monero
-> protocol, that portion is a work-in-progress. Please take the time to do it
-> if interested in learning about Monero p2p traffic!
-
-
-## Header
-This header is sent for every Monero p2p message.
-
-```
- 0               1               2               3
- 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-|      0x01     |      0x21     |      0x01     |      0x01     |
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-|      0x01     |      0x01     |      0x01     |      0x01     |
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-|                             Length                            |
-|                                                               |
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-|  E. Response  |                   Command
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-                |                 Return Code
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-                |Q|S|B|E|               Reserved
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-                |      0x01     |      0x00     |      0x00     |
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-|     0x00      |
-+-+-+-+-+-+-+-+-+
-```
-
-### Signature
-The first 8 bytes are the "signature" which helps identify the protocol (in
-case someone connected to the wrong port, etc). The comments indicate that byte
-sequence is from "benders nightmare".
-
-This also can be used by deep packet inspection (DPI) engines to identify
-Monero when the link is not encrypted. SSL has been proposed as a means to
-mitigate this issue, but BIP-151 or the Noise protocol should also be considered.
-
-### Length
-The length is an unsigned 64-bit little endian integer. The length does _not_
-include the header.
-
-The implementation currently rejects received messages that exceed 100 MB
-(base 10) by default.
-
-### Expect Response
-A zero-byte if no response is expected from the peer, and a non-zero byte if a
-response is expected from the peer. Peers must respond to requests with this
-flag in the same order that they were received, however, other messages can be
-sent between responses.
-
-There are some commands in the
-[cryptonote protocol](#cryptonote-protocol-commands) where a response is
-expected from the peer, but this flag is not set. Those responses are returned
-as notify messages and can be sent in any order by the peer.
-
-### Command
-An unsigned 32-bit little endian integer representing the Monero specific
-command being invoked.
-
-### Return Code
-A signed 32-bit little integer integer representing the response from the peer
-from the last command that was invoked. This is `0` for request messages.
-
-### Flags
- * `Q` - Bit is set if the message is a request.
- * `S` - Bit is set if the message is a response.
- * `B` - Bit is set if this is a the beginning of a [fragmented message](#fragmented-messages).
- * `E` - Bit is set if this is the end of a [fragmented message](#fragmented-messages).
-
-### Version
-A fixed value of `1` as an unsigned 32-bit little endian integer.
-
-
-## Message Flow
-The protocol can be subdivided into: (1) notifications, (2) requests,
-(3) responses, (4) fragmented messages, and (5) dummy messages. Response
-messages must be sent in the same order that a peer issued a request message.
-A peer does not have to send a response immediately following a request - any
-other message type can be sent instead.
-
-### Notifications
-Notifications are one-way messages that can be sent at any time without
-an expectation of a response from the peer. The `Q` bit must be set, the `S`,
-`B` and `E` bits must be unset, and the `Expect Response` field must be zeroed.
-
-Some notifications must be in response to other notifications. This is not
-part of the levin messaging layer, and is described in the
-[commands](#commands) section.
-
-### Requests
-Requests are the basis of the admin protocol for Monero. The `Q` bit must be
-set, the `S`, `B` and `E` bits must be unset, and the `Expect Response` field
-must be non-zero. The peer is expected to send a response message with the same
-`command` number.
-
-### Responses
-Response message can only be sent after a peer first issues a request message.
-Responses must have the `S` bit set, the `Q`, `B` and `E` bits unset, and have
-a zeroed `Expect Response` field. The `Command` field must be the same value
-that was sent in the request message. The `Return Code` is specific to the
-`Command` being issued (see [commands])(#commands)).
-
-### Fragmented
-Fragmented messages were introduced for the "white noise" feature for i2p/tor.
-A transaction can be sent in fragments to conceal when "real" data is being
-sent instead of dummy messages. Only one fragmented message can be sent at a
-time, and bits `B` and `E` are never set at the same time
-(see [dummy messages](#dummy)). The re-constructed message must contain a
-levin header for a different (non-fragment) message type.
-
-The `Q` and `S` bits are never set and the `Expect Response` field must always
-be zero. The first fragment has the `B` bit set, neither `B` nor `E` is set for
-"middle" fragments, and `E` is set for the last fragment.
-
-### Dummy
-Dummy messages have the `B` and `E` bits set, the `Q` and `S` bits unset, and
-the `Expect Reponse` field zeroed. When a message of this type is received, the
-contents can be safely ignored.
-
-
-## Commands
-### P2P (Admin) Commands
-
-#### (`1001` Request) Handshake
-#### (`1001` Response) Handshake
-#### (`1002` Request) Timed Sync
-#### (`1002` Response) Timed Sync
-#### (`1003` Request) Ping
-#### (`1003` Response) Ping
-#### (`1004` Request) Stat Info
-#### (`1004` Response) Stat Info
-#### (`1005` Request) Network State
-#### (`1005` Response) Network State
-#### (`1006` Request) Peer ID
-#### (`1006` Reponse) Peer ID
-#### (`1007` Request) Support Flags
-#### (`1007` Response) Support Flags
-
-### Cryptonote Protocol Commands
-
-#### (`2001` Notification) New Block
-#### (`2002` Notification) New Transactions
-#### (`2003` Notification) Request Get Objects
-#### (`2004` Notification) Response Get Objects
-#### (`2006` Notification) Request Chain
-#### (`2007` Notification) Response Chain Entry
-#### (`2008` Notification) New Fluffy Block
-#### (`2009` Notification) Request Fluffy Missing TX

LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2014-2021, The Monero Project
+Copyright (c) 2014-2018, The Monero Project
 
 All rights reserved.
 
@@ -29,13 +29,3 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 Parts of the project are originally copyright (c) 2012-2013 The Cryptonote
 developers
-
-Parts of the project are originally copyright (c) 2014 The Boolberry
-developers, distributed under the MIT licence:
-
-  Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
-
-  The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
-
-  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-

Makefile

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2020, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 #
 # All rights reserved.
 #
@@ -26,153 +26,103 @@
 # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-ANDROID_STANDALONE_TOOLCHAIN_PATH ?= /usr/local/toolchain
-
-dotgit=$(shell ls -d .git/config)
-ifneq ($(dotgit), .git/config)
-  USE_SINGLE_BUILDDIR=1
-endif
-
-subbuilddir:=$(shell echo  `uname | sed -e 's|[:/\\ \(\)]|_|g'`/`git branch | grep '\* ' | cut -f2- -d' '| sed -e 's|[:/\\ \(\)]|_|g'`)
-ifeq ($(USE_SINGLE_BUILDDIR),)
-  builddir := build/"$(subbuilddir)"
-  topdir   := ../../../..
-  deldirs  := $(builddir)
-else
-  builddir := build
-  topdir   := ../..
-  deldirs  := $(builddir)/debug $(builddir)/release $(builddir)/fuzz
-endif
-
 all: release-all
 
-depends:
-	cd contrib/depends && $(MAKE) HOST=$(target) && cd ../.. && mkdir -p build/$(target)/release
-	cd build/$(target)/release && cmake -DCMAKE_TOOLCHAIN_FILE=$(CURDIR)/contrib/depends/$(target)/share/toolchain.cmake ../../.. && $(MAKE)
-
 cmake-debug:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D CMAKE_BUILD_TYPE=Debug $(topdir)
+	mkdir -p build/debug
+	cd build/debug && cmake -D CMAKE_BUILD_TYPE=Debug ../..
 
 debug: cmake-debug
-	cd $(builddir)/debug && $(MAKE)
+	cd build/debug && $(MAKE)
 
 # Temporarily disable some tests:
 #  * libwallet_api_tests fail (Issue #895)
 debug-test:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Debug $(topdir) &&  $(MAKE) && $(MAKE) ARGS="-E libwallet_api_tests" test
-
-debug-test-asan:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D SANITIZE=ON -D CMAKE_BUILD_TYPE=Debug $(topdir) &&  $(MAKE) && $(MAKE) ARGS="-E libwallet_api_tests" test
-
-debug-test-trezor:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D TREZOR_DEBUG=ON -D CMAKE_BUILD_TYPE=Debug $(topdir) &&  $(MAKE) && $(MAKE) ARGS="-E libwallet_api_tests" test
+	mkdir -p build/debug
+	cd build/debug && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Debug ../.. &&  $(MAKE) && $(MAKE) ARGS="-E libwallet_api_tests" test
 
 debug-all:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=OFF -D USE_DEVICE_TREZOR=OFF -D BUILD_SHARED_LIBS=OFF -D CMAKE_BUILD_TYPE=Debug $(topdir) && $(MAKE)
+	mkdir -p build/debug
+	cd build/debug && cmake -D BUILD_TESTS=ON -D BUILD_SHARED_LIBS=OFF -D CMAKE_BUILD_TYPE=Debug ../.. && $(MAKE)
 
 debug-static-all:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D STATIC=ON -D CMAKE_BUILD_TYPE=Debug $(topdir) && $(MAKE)
+	mkdir -p build/debug
+	cd build/debug && cmake -D BUILD_TESTS=ON -D STATIC=ON -D CMAKE_BUILD_TYPE=Debug ../.. && $(MAKE)
 
-debug-static-win64:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Debug -D BUILD_TAG="win-x64" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/64-bit-toolchain.cmake -D MSYS2_FOLDER=$(shell cd ${MINGW_PREFIX}/.. && pwd -W) $(topdir) && $(MAKE)
- 
-debug-static-win32:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=Debug -D BUILD_TAG="win-x32" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/32-bit-toolchain.cmake -D MSYS2_FOLDER=$(shell cd ${MINGW_PREFIX}/.. && pwd -W) $(topdir) && $(MAKE)
- 
 cmake-release:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D CMAKE_BUILD_TYPE=Release $(topdir)
+	mkdir -p build/release
+	cd build/release && cmake -D CMAKE_BUILD_TYPE=Release ../..
 
 release: cmake-release
-	cd $(builddir)/release && $(MAKE)
+	cd build/release && $(MAKE)
 
 release-test:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=release $(topdir) && $(MAKE) && $(MAKE) test
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=release ../.. && $(MAKE) && $(MAKE) test
 
 release-all:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D USE_DEVICE_TREZOR=OFF -D CMAKE_BUILD_TYPE=release $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D CMAKE_BUILD_TYPE=release ../.. && $(MAKE)
 
 release-static:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D USE_DEVICE_TREZOR=OFF -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release ../.. && $(MAKE)
 
 coverage:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Debug -D COVERAGE=ON $(topdir) && $(MAKE) && $(MAKE) test
+	mkdir -p build/debug
+	cd build/debug && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Debug -D COVERAGE=ON ../.. && $(MAKE) && $(MAKE) test
 
 # Targets for specific prebuilt builds which will be advertised for updates by their build tag
 
 release-static-linux-armv6:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv6zk" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv6" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv6zk" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv6" ../.. && $(MAKE)
 
 release-static-linux-armv7:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv7-a" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv7" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv7-a" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv7" ../.. && $(MAKE)
 
-release-static-android-armv7:
-	mkdir -p $(builddir)/release/translations
-	cd $(builddir)/release/translations && cmake ../../../translations && $(MAKE)
-	cd $(builddir)/release && CC=arm-linux-androideabi-clang CXX=arm-linux-androideabi-clang++ cmake -D BUILD_TESTS=OFF -D ARCH="armv7-a" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D ANDROID=true -D INSTALL_VENDORED_LIBUNBOUND=ON -D BUILD_TAG="android-armv7" -D CMAKE_SYSTEM_NAME="Android" -D CMAKE_ANDROID_STANDALONE_TOOLCHAIN="${ANDROID_STANDALONE_TOOLCHAIN_PATH}" -D CMAKE_ANDROID_ARM_MODE=ON -D CMAKE_ANDROID_ARCH_ABI="armeabi-v7a" ../.. && $(MAKE)
-
-release-static-android-armv8:
-	mkdir -p $(builddir)/release/translations
-	cd $(builddir)/release/translations && cmake ../../../translations && $(MAKE)
-	cd $(builddir)/release && CC=aarch64-linux-android-clang CXX=aarch64-linux-android-clang++ cmake -D BUILD_TESTS=OFF -D ARCH="armv8-a" -D STATIC=ON -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D ANDROID=true -D INSTALL_VENDORED_LIBUNBOUND=ON -D BUILD_TAG="android-armv8" -D CMAKE_SYSTEM_NAME="Android" -D CMAKE_ANDROID_STANDALONE_TOOLCHAIN="${ANDROID_STANDALONE_TOOLCHAIN_PATH}" -D CMAKE_ANDROID_ARCH_ABI="arm64-v8a" ../.. && $(MAKE)
+release-static-android:
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv7-a" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D ANDROID=true -D INSTALL_VENDORED_LIBUNBOUND=ON -D BUILD_TAG="android" ../.. && $(MAKE)
 
 release-static-linux-armv8:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv8-a" -D STATIC=ON -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv8" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv8-a" -D STATIC=ON -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv8" ../.. && $(MAKE)
 
 release-static-linux-x86_64:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D STATIC=ON -D USE_DEVICE_TREZOR=OFF -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-x64" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-x64" ../.. && $(MAKE)
 
 release-static-freebsd-x86_64:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D STATIC=ON -D USE_DEVICE_TREZOR=OFF -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="freebsd-x64" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="freebsd-x64" ../.. && $(MAKE)
 
 release-static-mac-x86_64:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D STATIC=ON -D USE_DEVICE_TREZOR=OFF -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="mac-x64" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="mac-x64" ../.. && $(MAKE)
 
 release-static-linux-i686:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-x86" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-x86" ../.. && $(MAKE)
 
 release-static-win64:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -G "MSYS Makefiles" -D STATIC=ON -D USE_DEVICE_TREZOR=OFF -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="win-x64" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/64-bit-toolchain.cmake -D MSYS2_FOLDER=$(shell cd ${MINGW_PREFIX}/.. && pwd -W) $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="win-x64" -D CMAKE_TOOLCHAIN_FILE=../../cmake/64-bit-toolchain.cmake -D MSYS2_FOLDER=c:/msys64 ../.. && $(MAKE)
 
 release-static-win32:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="win-x32" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/32-bit-toolchain.cmake -D MSYS2_FOLDER=$(shell cd ${MINGW_PREFIX}/.. && pwd -W) $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="win-x32" -D CMAKE_TOOLCHAIN_FILE=../../cmake/32-bit-toolchain.cmake -D MSYS2_FOLDER=c:/msys32 ../.. && $(MAKE)
 
 fuzz:
-	mkdir -p $(builddir)/fuzz
-	cd $(builddir)/fuzz && cmake -D STATIC=ON -D SANITIZE=ON -D BUILD_TESTS=ON -D USE_LTO=OFF -D CMAKE_C_COMPILER=afl-gcc -D CMAKE_CXX_COMPILER=afl-g++ -D ARCH="x86-64" -D CMAKE_BUILD_TYPE=fuzz -D BUILD_TAG="linux-x64" $(topdir) && $(MAKE)
+	mkdir -p build/fuzz
+	cd build/fuzz && cmake -D STATIC=ON -D SANITIZE=ON -D BUILD_TESTS=ON -D USE_LTO=OFF -D CMAKE_C_COMPILER=afl-gcc -D CMAKE_CXX_COMPILER=afl-g++ -D ARCH="x86-64" -D CMAKE_BUILD_TYPE=fuzz -D BUILD_TAG="linux-x64" ../.. && $(MAKE)
 
 clean:
-	@echo "WARNING: Back-up your wallet if it exists within ./"$(deldirs)"!" ; \
-    read -r -p "This will destroy the build directory, continue (y/N)?: " CONTINUE; \
-	[ $$CONTINUE = "y" ] || [ $$CONTINUE = "Y" ] || (echo "Exiting."; exit 1;)
-	rm -rf $(deldirs)
-
-clean-all:
 	@echo "WARNING: Back-up your wallet if it exists within ./build!" ; \
-	read -r -p "This will destroy all build directories, continue (y/N)?: " CONTINUE; \
+        read -r -p "This will destroy the build directory, continue (y/N)?: " CONTINUE; \
 	[ $$CONTINUE = "y" ] || [ $$CONTINUE = "Y" ] || (echo "Exiting."; exit 1;)
-	rm -rf ./build
+	rm -rf build
 
 tags:
 	ctags -R --sort=1 --c++-kinds=+p --fields=+iaS --extra=+q --language-force=C++ src contrib tests/gtest

PKGBUILD

@@ -1,64 +0,0 @@
-# Maintainer: wowario <wowario[at]protonmail[dot]com>
-
-pkgname=wownero-git
-pkgver=0.8.0.0
-pkgrel=1
-pkgdesc="Wownero: a fairly launched privacy-centric meme coin with no premine and a finite supply"
-license=('BSD')
-arch=('x86_64')
-url="https://wownero.org/"
-depends=('boost-libs' 'libunwind' 'openssl' 'readline' 'zeromq' 'pcsclite' 'hidapi' 'protobuf')
-makedepends=('git' 'cmake' 'boost')
-source=(
-    "${pkgname}"::"git+https://github.com/wownero/wownero#tag=v${pkgver}"
-    "git+https://github.com/monero-project/unbound.git"
-    "git+https://github.com/monero-project/miniupnp.git"
-    "git+https://github.com/Tencent/rapidjson.git"
-    "git+https://github.com/trezor/trezor-common.git"
-    "git+https://github.com/wownero/RandomWOW.git"
-    "wownero.sysusers"
-    "wownero.tmpfiles")
-sha512sums=('SKIP'
-            'SKIP'
-            'SKIP'
-            'SKIP'
-            'SKIP'
-            'SKIP'
-            'SKIP'
-            'SKIP')
-
-prepare() {
-  cd "${pkgname}"
-  git submodule init
-  git config submodule.external/unbound.url "$srcdir/unbound"
-  git config submodule.external/miniupnp.url "$srcdir/miniupnp"
-  git config submodule.external/rapidjson.url "$srcdir/rapidjson"
-  git config submodule.external/RandomWOW.url "$srcdir/RandomWOW"
-  git submodule update
-}
-
-build() {
-  cd "${pkgname}"
-  mkdir -p build && cd build
-  cmake -D BUILD_TESTS=OFF -D CMAKE_BUILD_TYPE=release -D ARCH=default ../
-  make
-}
-
-package() {
-  backup=('etc/wownerod.conf')
-
-  cd "${pkgname}"
-  install -Dm644 "LICENSE" -t "${pkgdir}/usr/share/licenses/${pkgname}"
-
-  install -Dm644 "utils/conf/wownerod.conf" "${pkgdir}/etc/wownerod.conf"
-  install -Dm644 "utils/systemd/wownerod.service" "${pkgdir}/usr/lib/systemd/system/wownerod.service"
-  install -Dm644 "../wownero.sysusers" "${pkgdir}/usr/lib/sysusers.d/wownero.conf"
-  install -Dm644 "../wownero.tmpfiles" "${pkgdir}/usr/lib/tmpfiles.d/wownero.conf"
-
-  install -Dm755 "build/bin/wownero-wallet-cli" \
-                 "build/bin/wownero-wallet-rpc" \
-                 "build/bin/wownerod" \
-                 -t "${pkgdir}/usr/bin"
-}
-
-# vim: ts=2 sw=2 et:

README.i18n.md

@@ -1,13 +1,13 @@
-Monero daemon internationalization
+Wownero daemon internationalization
 ==================================
 
-The Monero command line tools can be translated in various languages. If you wish to contribute and need help/support, contact the [Monero Localization Workgroup on Taiga](https://taiga.getmonero.org/project/erciccione-monero-localization/) or come chat on `#monero-translations` (Freenode/IRC, riot/matrix, MatterMost)
+The Wownero command line tools can be translated in various languages. If you wish to contribute and need help/support, come chat on `#wownero` (Freenode/IRC)
 
-In order to use the same translation workflow as the [Monero Core GUI](https://github.com/monero-project/monero-gui), they use Qt Linguist translation files.  However, to avoid the dependencies on Qt this normally implies, they use a custom loader to read those files at runtime.
+In order to use the same translation workflow as the [Wownero GUI](https://github.com/wownero/wownero-gui), they use Qt Linguist translation files.  However, to avoid the dependencies on Qt this normally implies, they use a custom loader to read those files at runtime.
 
 ### Tools for translators
 
-In order to create, update or build translations files, you need to have Qt tools installed. For translating, you need either the **Qt Linguist GUI** ([part of Qt Creator](https://www.qt.io/download) or a [3rd-party standalone version](https://github.com/lelegard/qtlinguist-installers/releases)), or another tool that supports Qt ts files, such as Transifex.  The files are XML, so they can be edited in any plain text editor if needed.
+In order to create, update or build translations files, you need to have Qt tools installed. For translating, you need either the **Qt Linguist GUI** ([part of QT Creator](https://www.qt.io/download-open-source/#allDownloadsDiv-9) or a [3rd-party standalone version](https://github.com/lelegard/qtlinguist-installers/releases)), or another tool that supports Qt ts files, such as Transifex.  The files are XML, so they can be edited in any plain text editor if needed.
 
 ### Creating / modifying translations
 
@@ -15,33 +15,23 @@ You do not need anything from Qt in order to use the final translations.
 
 To update ts files after changing source code:
 
-```bash
-./utils/translations/update-translations.sh
-```
+    ./utils/translations/update-translations.sh
 
 To add a new language, eg Spanish (ISO code es):
 
-```bash
-cp translations/monero.ts translations/monero_es.ts
-```
+    cp translations/wownero.ts translations/wownero_es.ts
 
 To edit translations for Spanish:
 
-```bash
-linguist translations/monero_es.ts
-```
+    linguist translations/wownero_es.ts
 
 To build translations after modifying them:
 
-```bash
-./utils/translations/build-translations.sh
-```
+    ./utils/translations/build-translations.sh
 
 To test a translation:
 
-```bash
-LANG=es ./build/release/bin/monero-wallet-cli
-```
+    LANG=es ./build/release/bin/wownero-wallet-cli
 
 To add new translatable strings in the source code:
 
@@ -49,8 +39,6 @@ Use the `tr(string)` function if possible. If the code is in a class, and this c
 
 If you're getting messages of the form:
 
-```
-Class 'cryptonote::simple_wallet' lacks Q_OBJECT macro
-```
+    Class 'cryptonote::simple_wallet' lacks Q_OBJECT macro
 
 all is fine, we don't actually need that here.

README.md

@@ -1,152 +1,362 @@
-[![Build Status](https://ci.wownero.com/api/badges/wownero/wownero/status.svg)](https://ci.wownero.com/wownero/wownero)
-# ~~Mo~~Wownero -  Such privacy! Many coins! Wow! 🐕
+# ~~Mo~~Wownero
 
-Copyright (c) 2014-2021 The Monero Project.   
+Copyright (c) 2014-2018 The Monero Project.   
 Portions Copyright (c) 2012-2013 The Cryptonote developers.
 
 ## Resources
 
-- Web: [wownero.org](https://wownero.org)
+- Web: [wownero.org](http://wownero.org)
 - Twitter: [@w0wn3r0](https://twitter.com/w0wn3r0)
+- Discord: [discord.gg/sQt74ep](https://discord.gg/sQt74ep)
 - Reddit: [/r/wownero](https://www.reddit.com/r/wownero)
 - Mail: [wownero@protonmail.com](mailto:wownero@protonmail.com)
-- Git: [git.wownero.com/wownero/wownero](https://git.wownero.com/wownero/wownero)
-- Wownero Funding System: [funding.wownero.com](https://funding.wownero.com)
-- Wownero Forum: [forum.wownero.com](https://forum.wownero.com)
-- Discord: [discord.gg/ENbgme4bWq](https://discord.com/invite/ENbgme4bWq)
-- Telegram: [t.me/wownero](https://t.me/wownero)
-- Feather-WOW Desktop Wallet: [featherwallet.org/wownero](https://featherwallet.org/wownero)
-- WOW Stash Web Wallet: [wowstash.app](https://wowstash.app)
-- Public Node Status: [monero.fail](https://monero.fail/?crypto=wownero)
-- Map of Nodes: [wownero.fyi](https://wownero.fyi)
-- Wownero Memes: [suchwow.xyz]https://suchwow.xyz/posts/top)
-- XMR/WOW Swap: [nero Swap](https://neroswap.com)
-- Mining Pools: [miningpoolstats.stream](https://miningpoolstats.stream/wownero)
-- Market Info: [coinmarketcap.com](https://coinmarketcap.com/currencies/wownero), [coingecko.com](https://www.coingecko.com/en/coins/wownero/usd)
+- GitHub: [https://github.com/wownero/wownero](https://github.com/wownero/wownero)
+- IRC: [#wownero on Freenode](https://kiwiirc.com/client/irc.freenode.net/?nick=suchchatter|?#wownero)
 
-### Blockchain Explorers
-- https://explore.wownero.com
-- http://wow5eqtzqvsg5jctqzg5g7uk3u62sfqiacj5x6lo4by7bvnj6jkvubyd.onion
-- https://wownero.club
-- https://explorer.wownero.fyi
+## Vulnerability response
+
+- TODO
+
+## Build
+
+| Operating System      | Processor | Status |
+| --------------------- | -------- |--------|
+| Ubuntu 16.04          |  i686    | TODO
+| Ubuntu 16.04          |  amd64   | TODO
+| Ubuntu 16.04          |  armv7   | TODO
+| Debian Stable         |  armv8   | TODO
+| OSX 10.10             |  amd64   | TODO
+| OSX 10.11             |  amd64   | TODO
+| OSX 10.12             |  amd64   | TODO
+| FreeBSD 11            |  amd64   | TODO
+| DragonFly BSD 4.6     |  amd64   | TODO
+| Windows (MSYS2/MinGW) |  i686    | TODO
+| Windows (MSYS2/MinGW) |  amd64   | TODO
+
+## Coverage
+
+| Type      | Status |
+|-----------|--------|
+| License   | [![License](https://img.shields.io/badge/license-BSD3-blue.svg)](https://opensource.org/licenses/BSD-3-Clause)
 
 ## Introduction
 
-Wownero is a privacy-centric memecoin that was fairly launched on April 1, 2018 with no pre-mine, stealth-mine or ICO. Wownero has a maximum supply of around 184 million WOW with a slow and steady emission over 50 years. It is a fork of Monero, but with its own genesis block, so there is no degradation of privacy due to ring signatures using different participants for the same tx outputs on opposing forks.
+Wownero is a fork of the private cryptocurrenty Monero with two major changes: A capped emmision that disallows infinite coin creation 10x the coin for 10x the W0W; Wownero is a fairly launched coin with no premine. It's not a fork of another blockchain. With its own genesis block there is no degradation of privacy due to ring signatures using different participants for the same tx outputs on opposing forks.
+
+**Privacy:** Wownero uses a cryptographically sound system to allow you to send and receive funds without your transactions being easily revealed on the blockchain (the ledger of transactions that everyone has). This ensures that your purchases, receipts, and all transfers remain absolutely private by default.
+
+**Security:** Using the power of a distributed peer-to-peer consensus network, every transaction on the network is cryptographically secured. Individual wallets have a 25 word mnemonic seed that is only displayed once, and can be written down to backup the wallet. Wallet files are encrypted with a passphrase to ensure they are useless if stolen.
+
+**Untraceability:** By taking advantage of ring signatures, a special property of a certain type of cryptography, Wownero is able to ensure that transactions are not only untraceable, but have an optional measure of ambiguity that ensures that transactions cannot easily be tied back to an individual user or computer.
+
+## About this project
+
+This is the core implementation of Wownero. It is open source and completely free to use without restrictions, except for those specified in the license agreement below. There are no restrictions on anyone creating an alternative implementation of Wownero that uses the protocol and network in a compatible manner.
+
+As with many development projects, the repository on Github is considered to be the "staging" area for the latest changes. Before changes are merged into that branch on the main repository, they are tested by individual developers in their own branches, submitted as a pull request, and then subsequently tested by contributors who focus on testing and code reviews. That having been said, the repository should be carefully considered before using it in a production environment, unless there is a patch in the repository for a particular show-stopping issue you are experiencing. It is generally a better idea to use a tagged release for stability.
+
+**Anyone is welcome to contribute to Wownero's codebase!** If you have a fix or code change, feel free to submit it as a pull request directly to the "master" branch. In cases where the change is relatively small or does not affect other parts of the codebase it may be merged in immediately by any one of the collaborators. On the other hand, if the change is particularly large or complex, it is expected that it will be discussed at length either well in advance of the pull request being submitted, or even directly on the pull request. All pull requests will be considered safe until the US dollar valuation of 1 Wownero equals $1000. After this valuation has been reached, more reseach will be needed to introduce experimental cryptography and/or code into the codebase.  
 
 ## Supporting the project
 
-Wownero is a 100% community-sponsored endeavor. Supporting services are also graciously provided by sponsors:
+Wownero is a 100% community-sponsored endeavor. If you want to join our efforts, the easiest thing you can do is support the project financially.
 
-[<img src="https://git.wownero.com/wownero/meta/raw/branch/master/images/macstadium.png"
-      alt="MacStadium"
-      height="100">](https://www.macstadium.com)
-[<img src="https://git.wownero.com/wownero/meta/raw/branch/master/images/jetbrains.png"
-      alt="JetBrains"
-      height="100">](https://www.jetbrains.com)
+The Wownero donation address (mostly reserved for hookers and blow) is: `Wo3MWeKwtA918DU4c69hVSNgejdWFCRCuWjShRY66mJkU2Hv58eygJWDJS1MNa2Ge5M1WjUkGHuLqHkweDxwZZU42d16v94mP`
 
-Developers are volunteers doing this mostly for shits and giggles. If you would like to support our shenanigans and stimulant addictions, please consider donating to [WFS proposals](https://funding.wownero.com/proposals) or the dev slush fund.
+The Monero donation address is: `44AFFq5kSiGBoZ4NMDwYtN18obc8AemS33DBLWs3H7otXft3XjrpDtQGv7SqSsaBYBb98uNbr2VBBEt7f2wfn3RVGQBEP3A` (viewkey: `f359631075708155cc3d92a32b75a7d02a5dcf27756707b47a2b31b21c389501`)
 
-### Donation Addresses
+The Monero Bitcoin donation address is: `1KTexdemPdxSBcG55heUuTjDRYqbC5ZL8H`
 
-WOW: `Wo3MWeKwtA918DU4c69hVSNgejdWFCRCuWjShRY66mJkU2Hv58eygJWDJS1MNa2Ge5M1WjUkGHuLqHkweDxwZZU42d16v94mP`
+Core development funding and/or some supporting services are also graciously provided by sponsors:
 
-- view key: `e62e40bfd5ca7e3a7f199602a3c97df511780489e1c1861884b00c28abaea406`
+<img width="100" src="https://botw-pd.s3.amazonaws.com/styles/logo-thumbnail/s3/0024/1083/brand.gif"/><img width="100" src="https://blogvecindad.com/imagenes/2007/02/brawndo.jpg"/><img width="100" src="https://www.subscribepro.com/wp-content/uploads/2016/04/logo-depend-250x130.png"/>
 
-XMR: `44SQVPGLufPasUcuUQSZiF5c9BFzjcP8ucDxzzFDgLf1VkCEFaidJ3u2AhSKMhPLKA3jc2iS8wQHFcaigM6fXmo6AnFRn5B`
+## License
 
-- view key: `cb83681c31db0c79adf18f25b2a6d05f86db1109385b4928930e2acf49a3ed0b`
+See [LICENSE](LICENSE).
 
-BTC: `bc1qcw9zglp3fxyl25zswemw7jczlqryms2lsmu464`
+## Contributing
 
-## Release staging and Contributing
+If you want to help out, see [CONTRIBUTING](CONTRIBUTING.md) for a set of guidelines.
 
-**Anyone is welcome to contribute to Wownero's codebase!** 
+## Scheduled mandatory software upgrades
 
-If you have a fix or code change, feel free to submit it as a pull request. Ahead of a scheduled software upgrade, a development branch will be created with the new release version tag. Pull requests that address bugs should be made to Master. Pull requests that require review and testing (generally, optimizations and new features) should be made to the development branch. All pull requests will be considered safe until the US dollar valuation of 1 Wownero equals $1000. After this valuation has been reached, more research will be needed to introduce experimental cryptography and/or code into the codebase.
-
-Things to Do, Work in Progress, and Help Wanted tasks are tracked in the [Meta](https://git.wownero.com/wownero/meta/issues) repo. 
-
-Join `#wownero-dev` on IRC freenode to participate in development conversation.
-
-## Scheduled software upgrades
-
-Wownero uses a fixed-schedule software upgrade (hard fork) mechanism to implement new features. This means that users of Wownero (end users and service providers) should run current versions and upgrade their software on a regular schedule. The required software for these upgrades will be available prior to the scheduled date. Please check the repository prior to this date for the proper Wownero software version. Below is the historical schedule and the projected schedule for the next upgrade.
+Wownero uses a fixed-schedule mandatory software upgrade (hard fork) mechanism to implement new features. This means that users of Wownero (end users and service providers) need to run current versions and upgrade their software on a regular schedule.The required software for these upgrades will be available prior to the scheduled date. Please check the repository prior to this date for the proper Wownero software version. Below is the historical schedule and the projected schedule for the next upgrade.
 Dates are provided in the format YYYY-MM-DD. 
 
-| Software upgrade block height | Date       | Release Name | Minimum Wownero version | Recommended Wownero version | Details                                                                            |  
+
+| Software upgrade block height | Date       | Fork version | Minimum Wownero version | Recommended Wownero version | Details                                                                            |  
 | ------------------------------ | -----------| ----------------- | ---------------------- | -------------------------- | ---------------------------------------------------------------------------------- |
-| 1                              | 2018-04-01 | Awesome Akita                | v0.1.0.0               | v0.1.0.0                  | Cryptonight variant 1, ringsize >= 8, sorted inputs
-| 69,69                           | 2018-04-24 | Busty Brazzers                | v0.2.0.0               | v0.2.0.0                  | Bulletproofs, LWMA difficulty algorithm, ringsize >= 10, reduce unlock to 4
-| 53,666                          | 2018-10-06 | Cool Cage                | v0.3.0.0               | v0.3.1.3                  | Cryptonight variant 2, LWMA v2, ringsize = 22, MMS
-| 63,469                          | 2018-11-11 | Dank Doge               | v0.4.0.0               | v0.4.0.0                  | LWMA v4
-| 81,769                          | 2019-02-19 | Erotic EggplantEmoji    | v0.5.0.0               | v0.5.0.2                  | Cryptonight/wow, LWMA v1 with N=144, Updated Bulletproofs, Fee Per Byte, Auto-churn
-| 114,969                          | 2019-06-14 | F For Fappening    | v0.6.1.0               | v0.6.1.2                  | RandomWOW, new block weight algorithm, slightly more efficient RingCT format
-| 160,777                          | 2019-11-20 | Gaping Goatse    | v0.7.0.0               | v0.7.1.0                  | Only allow >= 2 outputs, change to the block median used to calculate penalty, rct sigs in coinbase forbidden, 4 unlock time as protocol rule
-| -                         | 2020-06-28 | Hallucinogenic Hypnotoad  | v0.8.0.0               | v0.8.0.2                  | Dandelion++ support
-| 253,999                         | 2020-10-09 | Illiterate Illuminati  | v0.9.0.0               | v0.9.3.3                  | Dynamic coinbase unlock (up to 1 mo.), Deterministic unlock times, Enforce maximum coinbase amount, show_qr_code wallet command, CLSAG
+| 1                              | 2018-04-01 | v7                | v0.1.0.0               | v0.1.0.0                  | Cryptonight variant 1, ringsize >= 8, sorted inputs
+| 6969                           | 2018-04-24 | v8                | v0.2.0.0               | v0.2.0.0                  | Bulletproofs, LWMA difficulty algorithm, ringsize >= 10, reduce unlock to 4
 
 X's indicate that these details have not been determined as of commit date.
 
-\* indicates estimate as of commit date
+## Release staging schedule and protocol
 
-## Installing from a package
+Approximately three months prior to a scheduled mandatory software upgrade, a branch from Master will be created with the new release version tag. Pull requests that address bugs should then be made to both Master and the new release branch. Pull requests that require extensive review and testing (generally, optimizations and new features) should *not* be made to the release branch. 
 
-Packages are available for
+## Compiling Wownero from source
 
-* Arch Linux/Manjaro
+### Dependencies
 
-        yay -S wownero-git
+The following table summarizes the tools and libraries required to build. A
+few of the libraries are also included in this repository (marked as
+"Vendored"). By default, the build uses the library installed on the system,
+and ignores the vendored sources. However, if no library is found installed on
+the system, then the vendored source will be built and used. The vendored
+sources are also used for statically-linked builds because distribution
+packages often include only shared library binaries (`.so`) but not static
+library archives (`.a`).
 
-* Gentoo - Russian hacking tool
-
-        emerge --noreplace eselect-repository
-        eselect repository enable monero
-        emaint sync -r monero
-        echo '*/*::monero ~amd64' >> /etc/portage/package.accept_keywords
-        emerge net-p2p/wownero
-
-* NixOS
-
-        nix-shell -p wownero
-
-* Ubuntu 18.04/Ubuntu 16.04/Debian 9/Debian 8 (amd64)
-
-        sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 8BC34ABB48E565F0
-        sudo add-apt-repository "deb http://ppa.wownero.com/ bionic main"
-        sudo apt-get update
-        sudo apt-get install wownero
-
-Packaging for your favorite distribution would be a welcome contribution!
-
-**DISCLAIMER: These packages are not part of this repository, and as such, do not go through the same review process to ensure their trustworthiness and security.**
+| Dep          | Min. version  | Vendored | Debian/Ubuntu pkg  | Arch pkg     | Fedora            | Optional | Purpose        |
+| ------------ | ------------- | -------- | ------------------ | ------------ | ----------------- | -------- | -------------- |
+| GCC          | 4.7.3         | NO       | `build-essential`  | `base-devel` | `gcc`             | NO       |                |
+| CMake        | 3.0.0         | NO       | `cmake`            | `cmake`      | `cmake`           | NO       |                |
+| pkg-config   | any           | NO       | `pkg-config`       | `base-devel` | `pkgconf`         | NO       |                |
+| Boost        | 1.58          | NO       | `libboost-all-dev` | `boost`      | `boost-devel`     | NO       | C++ libraries  |
+| OpenSSL      | basically any | NO       | `libssl-dev`       | `openssl`    | `openssl-devel`   | NO       | sha256 sum     |
+| libzmq       | 3.0.0         | NO       | `libzmq3-dev`      | `zeromq`     | `cppzmq-devel`    | NO       | ZeroMQ library |
+| libunbound   | 1.4.16        | YES      | `libunbound-dev`   | `unbound`    | `unbound-devel`   | NO       | DNS resolver   |
+| libsodium    | ?             | NO       | `libsodium-dev`    | ?            | `libsodium-devel` | NO       | libsodium      |
+| libminiupnpc | 2.0           | YES      | `libminiupnpc-dev` | `miniupnpc`  | `miniupnpc-devel` | YES      | NAT punching   |
+| libunwind    | any           | NO       | `libunwind8-dev`   | `libunwind`  | `libunwind-devel` | YES      | Stack traces   |
+| liblzma      | any           | NO       | `liblzma-dev`      | `xz`         | `xz-devel`        | YES      | For libunwind  |
+| libreadline  | 6.3.0         | NO       | `libreadline6-dev` | `readline`   | `readline-devel`  | YES      | Input editing  |
+| ldns         | 1.6.17        | NO       | `libldns-dev`      | `ldns`       | `ldns-devel`      | YES      | SSL toolkit    |
+| expat        | 1.1           | NO       | `libexpat1-dev`    | `expat`      | `expat-devel`     | YES      | XML parsing    |
+| GTest        | 1.5           | YES      | `libgtest-dev`^    | `gtest`      | `gtest-devel`     | YES      | Test suite     |
+| Doxygen      | any           | NO       | `doxygen`          | `doxygen`    | `doxygen`         | YES      | Documentation  |
+| Graphviz     | any           | NO       | `graphviz`         | `graphviz`   | `graphviz`        | YES      | Documentation  |
 
 
-## Building from Source
+[^] On Debian/Ubuntu `libgtest-dev` only includes sources and headers. You must
+build the library binary manually. This can be done with the following command ```sudo apt-get install libgtest-dev && cd /usr/src/gtest && sudo cmake . && sudo make && sudo mv libg* /usr/lib/ ```
 
-* Docker
+### Cloning the repository
 
-        git clone https://git.wownero.com/wownero/wownero && cd wownero
-        docker build -t git-wow:master -m 4g .
-        docker run -it -p 34567:34567 -p 34568:34568 -w /home/wownero/build/release/bin git-wow:master bash
+`$ git clone https://github.com/wownero/wownero`
 
-* Arch Linux/Manjaro
+Submodules are fetched and updated automatically. If you wish to
+do this manually, run CMake flag `-DMANUAL_SUBMODULES=ON` to opt out.
 
-        sudo pacman -Syu && sudo pacman -S base-devel cmake boost openssl zeromq libpgm unbound libsodium git libusb systemd
-        git clone https://git.wownero.com/wownero/wownero && cd wownero
-        make -j2
+### Build instructions
 
-* Debian/Ubuntu
+Wownero uses the CMake build system and a top-level [Makefile](Makefile) that
+invokes cmake commands as needed.
 
-        sudo apt update && sudo apt install build-essential cmake pkg-config libboost-all-dev libssl-dev libzmq3-dev libunbound-dev libsodium-dev libunwind8-dev liblzma-dev libreadline6-dev libldns-dev libexpat1-dev libpgm-dev libhidapi-dev libusb-1.0-0-dev libprotobuf-dev protobuf-compiler libudev-dev git -y
-        git clone https://git.wownero.com/wownero/wownero && cd wownero
-        make -j2
+#### On Linux and OS X
+
+* Install the dependencies
+* Change to the root of the source code directory and build:
+
+        cd wownero
+        make
+
+    *Optional*: If your machine has several cores and enough memory, enable
+    parallel build by running `make -j<number of threads>` instead of `make`. For
+    this to be worthwhile, the machine should have one core and about 2GB of RAM
+    available per thread.
+
+    *Note*: If cmake can not find zmq.hpp file on OS X, installing `zmq.hpp` from
+    https://github.com/zeromq/cppzmq to `/usr/local/include` should fix that error.
+
+* The resulting executables can be found in `build/release/bin`
+
+* Add `PATH="$PATH:$HOME/wownero/build/release/bin"` to `.profile`
+
+* Run Wownero with `wownerod --detach`
+
+* **Optional**: build and run the test suite to verify the binaries:
+
+        make release-test
+
+    *NOTE*: `core_tests` test may take a few hours to complete.
+
+* **Optional**: to build binaries suitable for debugging:
+
+         make debug
+
+* **Optional**: to build statically-linked binaries:
+
+         make release-static
+
+Dependencies need to be built with -fPIC. Static libraries usually aren't, so you may have to build them yourself with -fPIC. Refer to their documentation for how to build them.
+
+* **Optional**: build documentation in `doc/html` (omit `HAVE_DOT=YES` if `graphviz` is not installed):
+
+        HAVE_DOT=YES doxygen Doxyfile
+
+#### On Windows:
+
+Binaries for Windows are built on Windows using the MinGW toolchain within
+[MSYS2 environment](http://msys2.github.io). The MSYS2 environment emulates a
+POSIX system. The toolchain runs within the environment and *cross-compiles*
+binaries that can run outside of the environment as a regular Windows
+application.
+
+**Preparing the build environment**
+
+* Download and install the [MSYS2 installer](http://msys2.github.io), either the 64-bit or the 32-bit package, depending on your system.
+* Open the MSYS shell via the `MSYS2 Shell` shortcut
+* Update packages using pacman:  
+
+        pacman -Syuu  
+
+* Exit the MSYS shell using Alt+F4  
+* Edit the properties for the `MSYS2 Shell` shortcut changing "msys2_shell.bat" to "msys2_shell.cmd -mingw64" for 64-bit builds or "msys2_shell.cmd -mingw32" for 32-bit builds
+* Restart MSYS shell via modified shortcut and update packages again using pacman:  
+
+        pacman -Syuu  
 
 
-## Running Binaries
+* Install dependencies:
+
+    To build for 64-bit Windows:
+
+        pacman -S mingw-w64-x86_64-toolchain make mingw-w64-x86_64-cmake mingw-w64-x86_64-boost mingw-w64-x86_64-openssl mingw-w64-x86_64-zeromq mingw-w64-x86_64-libsodium
+
+    To build for 32-bit Windows:
+ 
+        pacman -S mingw-w64-i686-toolchain make mingw-w64-i686-cmake mingw-w64-i686-boost mingw-w64-i686-openssl mingw-w64-i686-zeromq mingw-w64-i686-libsodium
+
+* Open the MingW shell via `MinGW-w64-Win64 Shell` shortcut on 64-bit Windows
+  or `MinGW-w64-Win64 Shell` shortcut on 32-bit Windows. Note that if you are
+  running 64-bit Windows, you will have both 64-bit and 32-bit MinGW shells.
+
+**Building**
+
+* If you are on a 64-bit system, run:
+
+        make release-static-win64
+
+* If you are on a 32-bit system, run:
+
+        make release-static-win32
+
+* The resulting executables can be found in `build/release/bin`
+
+### On FreeBSD:
+
+The project can be built from scratch by following instructions for Linux above. If you are running wownero in a jail you need to add the flag: `allow.sysvipc=1` to your jail configuration, otherwise lmdb will throw the error message: `Failed to open lmdb environment: Function not implemented`.
+
+### On OpenBSD:
+
+#### OpenBSD < 6.2
+
+This has been tested on OpenBSD 5.8.
+
+You will need to add a few packages to your system. `pkg_add db cmake gcc gcc-libs g++ miniupnpc gtest`.
+
+The doxygen and graphviz packages are optional and require the xbase set.
+
+The Boost package has a bug that will prevent librpc.a from building correctly. In order to fix this, you will have to Build boost yourself from scratch. Follow the directions here (under "Building Boost"):
+https://github.com/bitcoin/bitcoin/blob/master/doc/build-openbsd.md
+
+You will have to add the serialization, date_time, and regex modules to Boost when building as they are needed by Wownero.
+
+To build: `env CC=egcc CXX=eg++ CPP=ecpp DEVELOPER_LOCAL_TOOLS=1 BOOST_ROOT=/path/to/the/boost/you/built make release-static-64`
+
+#### OpenBSD >= 6.2
+
+You will need to add a few packages to your system. `pkg_add cmake miniupnpc zeromq libiconv`.
+
+The doxygen and graphviz packages are optional and require the xbase set.
+
+
+Build the Boost library using clang. This guide is derived from: https://github.com/bitcoin/bitcoin/blob/master/doc/build-openbsd.md
+
+We assume you are compiling with a non-root user and you have `doas` enabled.
+
+Note: do not use the boost package provided by OpenBSD, as we are installing boost to `/usr/local`.
+
+```
+# Create boost building directory
+mkdir ~/boost
+cd ~/boost
+
+# Fetch boost source
+ftp -o boost_1_64_0.tar.bz2 https://netcologne.dl.sourceforge.net/project/boost/boost/1.64.0/boost_1_64_0.tar.bz2 
+
+# MUST output: (SHA256) boost_1_64_0.tar.bz2: OK
+echo "7bcc5caace97baa948931d712ea5f37038dbb1c5d89b43ad4def4ed7cb683332 boost_1_64_0.tar.bz2" | sha256 -c
+tar xfj boost_1_64_0.tar.bz2
+
+# Fetch and apply boost patches, required for OpenBSD
+ftp -o boost_test_impl_execution_monitor_ipp.patch https://raw.githubusercontent.com/openbsd/ports/bee9e6df517077a7269ff0dfd57995f5c6a10379/devel/boost/patches/patch-boost_test_impl_execution_monitor_ipp
+ftp -o boost_config_platform_bsd_hpp.patch https://raw.githubusercontent.com/openbsd/ports/90658284fb786f5a60dd9d6e8d14500c167bdaa0/devel/boost/patches/patch-boost_config_platform_bsd_hpp
+
+# MUST output: (SHA256) boost_config_platform_bsd_hpp.patch: OK
+echo "1f5e59d1154f16ee1e0cc169395f30d5e7d22a5bd9f86358f738b0ccaea5e51d boost_config_platform_bsd_hpp.patch" | sha256 -c
+# MUST output: (SHA256) boost_test_impl_execution_monitor_ipp.patch: OK
+echo "30cec182a1437d40c3e0bd9a866ab5ddc1400a56185b7e671bb3782634ed0206 boost_test_impl_execution_monitor_ipp.patch" | sha256 -c
+
+cd boost_1_64_0
+patch -p0 < ../boost_test_impl_execution_monitor_ipp.patch
+patch -p0 < ../boost_config_platform_bsd_hpp.patch
+
+# Start building boost
+echo 'using clang : : c++ : <cxxflags>"-fvisibility=hidden -fPIC" <linkflags>"" <archiver>"ar" <striper>"strip"  <ranlib>"ranlib" <rc>"" : ;' > user-config.jam
+./bootstrap.sh --without-icu --with-libraries=chrono,filesystem,program_options,system,thread,test,date_time,regex,serialization,locale --with-toolset=clang
+./b2 toolset=clang cxxflags="-stdlib=libc++" linkflags="-stdlib=libc++" -sICONV_PATH=/usr/local
+doas ./b2 -d0 runtime-link=shared threadapi=pthread threading=multi link=static variant=release --layout=tagged --build-type=complete --user-config=user-config.jam -sNO_BZIP2=1 -sICONV_PATH=/usr/local --prefix=/usr/local install
+```
+
+Build cppzmq
+
+Build the cppzmq bindings.
+
+We assume you are compiling with a non-root user and you have `doas` enabled.
+
+```
+# Create cppzmq building directory
+mkdir ~/cppzmq
+cd ~/cppzmq
+
+# Fetch cppzmq source
+ftp -o cppzmq-4.2.3.tar.gz https://github.com/zeromq/cppzmq/archive/v4.2.3.tar.gz
+
+# MUST output: (SHA256) cppzmq-4.2.3.tar.gz: OK
+echo "3e6b57bf49115f4ae893b1ff7848ead7267013087dc7be1ab27636a97144d373 cppzmq-4.2.3.tar.gz" | sha256 -c
+tar xfz cppzmq-4.2.3.tar.gz
+
+# Start building cppzmq
+cd cppzmq-4.2.3
+mkdir build
+cd build
+cmake ..
+doas make install
+```
+
+Build wownero: `env DEVELOPER_LOCAL_TOOLS=1 BOOST_ROOT=/usr/local make release-static`
+
+### On Solaris:
+
+The default Solaris linker can't be used, you have to install GNU ld, then run cmake manually with the path to your copy of GNU ld:
+
+        mkdir -p build/release
+        cd build/release
+        cmake -DCMAKE_LINKER=/path/to/ld -D CMAKE_BUILD_TYPE=Release ../..
+        cd ../..
+
+Then you can run make as usual.
+
+### Building portable statically linked binaries
+
+By default, in either dynamically or statically linked builds, binaries target the specific host processor on which the build happens and are not portable to other processors. Portable binaries can be built using the following targets:
+
+* ```make release-static-linux-x86_64``` builds binaries on Linux on x86_64 portable across POSIX systems on x86_64 processors
+* ```make release-static-linux-i686``` builds binaries on Linux on x86_64 or i686 portable across POSIX systems on i686 processors
+* ```make release-static-linux-armv8``` builds binaries on Linux portable across POSIX systems on armv8 processors
+* ```make release-static-linux-armv7``` builds binaries on Linux portable across POSIX systems on armv7 processors
+* ```make release-static-linux-armv6``` builds binaries on Linux portable across POSIX systems on armv6 processors
+* ```make release-static-win64``` builds binaries on 64-bit Windows portable across 64-bit Windows systems
+* ```make release-static-win32``` builds binaries on 64-bit or 32-bit Windows portable across 32-bit Windows systems
+
+## Running wownerod
 
 The build places the binary in `bin/` sub-directory within the build directory
-from which cmake was invoked (repository root by default). To run in the
+from which cmake was invoked (repository root by default). To run in
 foreground:
 
     ./bin/wownerod
@@ -155,7 +365,7 @@ To list all available options, run `./bin/wownerod --help`.  Options can be
 specified either on the command line or in a configuration file passed by the
 `--config-file` argument.  To specify an option in the configuration file, add
 a line with the syntax `argumentname=value`, where `argumentname` is the name
-of the argument without the leading dashes, for example, `log-level=1`.
+of the argument without the leading dashes, for example `log-level=1`.
 
 To run in background:
 
@@ -168,34 +378,109 @@ service](utils/systemd/wownerod.service) assumes that the user `wownero` exists
 and its home is the data directory specified in the [example
 config](utils/conf/wownerod.conf).
 
-Once node is synced to network, run the CLI wallet by entering:
+If you're on Mac, you may need to add the `--max-concurrency 1` option to
+wownero-wallet-cli, and possibly wownerod, if you get crashes refreshing.
 
-    ./bin/wownero-wallet-cli
+## Internationalization
 
-Type `help` in CLI wallet to see standard commands (for advanced options, type `help_advanced`).
+See [README.i18n.md](README.i18n.md).
 
-## Tor Anonymity Network
+## Using Tor
 
-* Install [Tor Browser](https://www.torproject.org/download/)
-* Open `torrc` file in a text editor ([installation directory]/Browser/TorBrowser/Data/Tor/torrc) and add hidden service information as follows:
+While Wownero isn't made to integrate with Tor, it can be used wrapped with torsocks, by
+setting the following configuration parameters and environment variables:
+
+* `--p2p-bind-ip 127.0.0.1` on the command line or `p2p-bind-ip=127.0.0.1` in
+  wownerod.conf to disable listening for connections on external interfaces.
+* `--no-igd` on the command line or `no-igd=1` in wownerod.conf to disable IGD
+  (UPnP port forwarding negotiation), which is pointless with Tor.
+* `DNS_PUBLIC=tcp` or `DNS_PUBLIC=tcp://x.x.x.x` where x.x.x.x is the IP of the
+  desired DNS server, for DNS requests to go over TCP, so that they are routed
+  through Tor. When IP is not specified, wownerod uses the default list of
+  servers defined in [src/common/dns_utils.cpp](src/common/dns_utils.cpp).
+* `TORSOCKS_ALLOW_INBOUND=1` to tell torsocks to allow wownerod to bind to interfaces
+   to accept connections from the wallet. On some Linux systems, torsocks
+   allows binding to localhost by default, so setting this variable is only
+   necessary to allow binding to local LAN/VPN interfaces to allow wallets to
+   connect from remote hosts. On other systems, it may be needed for local wallets
+   as well.
+* Do NOT pass `--detach` when running through torsocks with systemd, (see
+  [utils/systemd/wownerod.service](utils/systemd/wownerod.service) for details).
+
+Example command line to start wownerod through Tor:
+
+    DNS_PUBLIC=tcp torsocks wownerod --p2p-bind-ip 127.0.0.1 --no-igd
+
+### Using Tor on Tails
+
+TAILS ships with a very restrictive set of firewall rules. Therefore, you need
+to add a rule to allow this connection too, in addition to telling torsocks to
+allow inbound connections. Full example:
+
+    sudo iptables -I OUTPUT 2 -p tcp -d 127.0.0.1 -m tcp --dport 34568 -j ACCEPT
+    DNS_PUBLIC=tcp torsocks ./wownerod --p2p-bind-ip 127.0.0.1 --no-igd --rpc-bind-ip 127.0.0.1 \
+        --data-dir /home/amnesia/Persistent/your/directory/to/the/blockchain
+
+## Debugging
+
+This section contains general instructions for debugging failed installs or problems encountered with Wownero. First ensure you are running the latest version built from the Github repo.
+
+### Obtaining stack traces and core dumps on Unix systems
+
+We generally use the tool `gdb` (GNU debugger) to provide stack trace functionality, and `ulimit` to provide core dumps in builds which crash or segfault.
+
+* To use gdb in order to obtain a stack trace for a build that has stalled:
+
+Run the build.
+
+Once it stalls, enter the following command:
 
 ```
-HiddenServiceDir [installation directory]/Browser/TorBrowser/Data/Tor/wow_node
-HiddenServiceVersion 3
-HiddenServicePort 44568 127.0.0.1:44568
-```
-* Save `torrc` file and restart Tor Browser (keep open)
-* Change directory to the `wow_node` folder, open `hostname` file, and copy your node's ".onion" address
-* Start wownerod with the following parameters:
-
-```
-./wownerod --tx-proxy tor,127.0.0.1:9150,10 --add-peer hdps3qwnusz64r7odvynmae6myc2uyvrsc2emap6636qeuzll72eouid.onion:44568 --anonymous-inbound YOUR_NODE_ADDRESS.onion:44568,127.0.0.1:44568,25
+gdb /path/to/wownerod `pidof wownerod` 
 ```
 
-### Access remote Tor node from CLI wallet
+Type `thread apply all bt` within gdb in order to obtain the stack trace
 
-```
-./wownero-wallet-cli --proxy 127.0.0.1:9150 --daemon-address wow7dhbgiljnkspkzpjyy66auegbrye2ptfv4gucgbhireg5rrjza5ad.onion:34568
-```
+* If however the core dumps or segfaults:
 
-Use port `9050` instead of `9150` if you installed Tor as a standalone daemon. For more information, check out [ANONYMITY_NETWORKS](https://git.wownero.com/wownero/wownero/src/branch/master/ANONYMITY_NETWORKS.md).
+Enter `ulimit -c unlimited` on the command line to enable unlimited filesizes for core dumps
+
+Enter `echo core | sudo tee /proc/sys/kernel/core_pattern` to stop cores from being hijacked by other tools
+
+Run the build.
+
+When it terminates with an output along the lines of "Segmentation fault (core dumped)", there should be a core dump file in the same directory as wownerod. It may be named just `core`, or `core.xxxx` with numbers appended.
+
+You can now analyse this core dump with `gdb` as follows:
+
+`gdb /path/to/wownerod /path/to/dumpfile`
+
+Print the stack trace with `bt`
+
+* To run wownero within gdb:
+
+Type `gdb /path/to/wownerod`
+
+Pass command-line options with `--args` followed by the relevant arguments
+
+Type `run` to run wownerod
+
+### Analysing memory corruption
+
+We use the tool `valgrind` for this.
+
+Run with `valgrind /path/to/wownerod`. It will be slow.
+
+### LMDB
+
+Instructions for debugging suspected blockchain corruption as per @HYC
+
+There is an `mdb_stat` command in the LMDB source that can print statistics about the database but it's not routinely built. This can be built with the following command:
+
+`cd ~/wownero/external/db_drivers/liblmdb && make`
+
+The output of `mdb_stat -ea <path to blockchain dir>` will indicate inconsistencies in the blocks, block_heights and block_info table.
+
+The output of `mdb_dump -s blocks <path to blockchain dir>` and `mdb_dump -s block_info <path to blockchain dir>` is useful for indicating whether blocks and block_info contain the same keys.
+
+These records are dumped as hex data, where the first line is the key and the second line is the data.

ZMQ.md

@@ -1,61 +0,0 @@
-# The Current/Future Status of ZMQ in Monero
-
-## ZMQ Pub/Sub
-Client `ZMQ_SUB` sockets must "subscribe" to topics before it receives any data.
-This allows filtering on the server side, so network traffic is reduced. Monero
-allows for filtering on: (1) format, (2) context, and (3) event.
-
- * **format** refers to the _wire_ format (i.e. JSON) used to send event
-   information.
- * **context** allows for a reduction in fields for the event, so the
-   daemon doesn't waste cycles serializing fields that get ignored.
- * **event** refers to status changes occurring within the daemon (i.e. new
-   block to main chain).
-
- * Formats:
-   * `json`
- * Contexts:
-   * `full` - the entire block or transaction is transmitted (the hash can be
-     computed remotely).
-   * `minimal` - the bare minimum for a remote client to react to an event is
-     sent.
- * Events:
-   * `chain_main` - changes to the primary/main blockchain.
-   * `txpool_add` - new _publicly visible_ transactions in the mempool.
-     Includes previously unseen transactions in a block but _not_ the
-     `miner_tx`. Does not "re-publish" after a reorg. Includes `do_not_relay`
-     transactions.
-
-The subscription topics are formatted as `format-context-event`, with prefix
-matching supported by both Monero and ZMQ. The `format`, `context` and `event`
-will _never_ have hyphens or colons in their name. For example, subscribing to
-`json-minimal-chain_main` will send minimal information in JSON when changes
-to the main/primary blockchain occur. Whereas, subscribing to `json-minimal`
-will send minimal information in JSON on all available events supported by the
-daemon.
-
-The Monero daemon will ensure that events prefixed by `chain` will be sent in
-"chain-order" - the `prev_id` (hash) field will _always_ refer to a previous
-block. On rollbacks/reorgs, the event will reference an earlier block in the
-chain instead of the last block. The Monero daemon also ensures that
-`txpool_add` events are sent before `chain_*` events - the `chain_*` messages
-will only serialize miner transactions since the other transactions were
-previously published via `txpool_add`. This prevents transactions from being
-serialized twice, even when the transaction was first observed in a block.
-
-ZMQ Pub/Sub will drop messages if the network is congested, so the above rules
-for send order are used for detecting lost messages. A missing gap in `height`
-or `prev_id` for `chain_*` events indicates a lost pub message. Missing
-`txpool_add` messages can only be detected at the next `chain_` message.
-
-Since blockchain events can be dropped, clients will likely want to have a
-timeout against `chain_main` events. The `GetLastBlockHeader` RPC is useful
-for checking the current chain state. Dropped messages should be rare in most
-conditions.
-
-The Monero daemon will send a `txpool_add` pub exactly once for each
-transaction, even after a reorg or restarts. Clients should use the
-`GetTransactionPool` after a reorg to get all transactions that have been put
-back into the tx pool or been invalidated due to a double-spend.
-
-

cmake/32-bit-toolchain.cmake

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2020, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 # 
 # All rights reserved.
 # 
@@ -26,9 +26,7 @@
 # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-if (NOT CMAKE_HOST_WIN32)
-  set (CMAKE_SYSTEM_NAME Windows)
-endif()
+set (CMAKE_SYSTEM_NAME Windows)
 
 set (GCC_PREFIX i686-w64-mingw32)
 set (CMAKE_C_COMPILER ${GCC_PREFIX}-gcc)

cmake/64-bit-toolchain.cmake

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2020, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 # 
 # All rights reserved.
 # 
@@ -26,9 +26,7 @@
 # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-if (NOT CMAKE_HOST_WIN32)
-  set (CMAKE_SYSTEM_NAME Windows)
-endif()
+set (CMAKE_SYSTEM_NAME Windows)
 
 set (GCC_PREFIX x86_64-w64-mingw32)
 set (CMAKE_C_COMPILER ${GCC_PREFIX}-gcc)

cmake/CheckLinkerFlag.cmake

@@ -39,7 +39,7 @@ macro(CHECK_LINKER_FLAG flag VARIABLE)
       endif()
       set(${VARIABLE} "" CACHE INTERNAL "Have linker flag ${flag}")
       file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Determining if the ${flag} linker flag is supported "
+        "Determining if the ${flag} linker flag is suppored "
         "failed with the following output:\n"
         "${OUTPUT}\n\n")
     endif()

cmake/CheckTrezor.cmake

@@ -1,181 +0,0 @@
-OPTION(USE_DEVICE_TREZOR "Trezor support compilation" ON)
-OPTION(USE_DEVICE_TREZOR_LIBUSB "Trezor LibUSB compilation" ON)
-OPTION(USE_DEVICE_TREZOR_UDP_RELEASE "Trezor UdpTransport in release mode" OFF)
-OPTION(USE_DEVICE_TREZOR_DEBUG "Trezor Debugging enabled" OFF)
-OPTION(TREZOR_DEBUG "Main trezor debugging switch" OFF)
-
-# Helper function to fix cmake < 3.6.0 FindProtobuf variables
-function(_trezor_protobuf_fix_vars)
-    if(${CMAKE_VERSION} VERSION_LESS "3.6.0")
-        foreach(UPPER
-                PROTOBUF_SRC_ROOT_FOLDER
-                PROTOBUF_IMPORT_DIRS
-                PROTOBUF_DEBUG
-                PROTOBUF_LIBRARY
-                PROTOBUF_PROTOC_LIBRARY
-                PROTOBUF_INCLUDE_DIR
-                PROTOBUF_PROTOC_EXECUTABLE
-                PROTOBUF_LIBRARY_DEBUG
-                PROTOBUF_PROTOC_LIBRARY_DEBUG
-                PROTOBUF_LITE_LIBRARY
-                PROTOBUF_LITE_LIBRARY_DEBUG
-                )
-            if (DEFINED ${UPPER})
-                string(REPLACE "PROTOBUF_" "Protobuf_" Camel ${UPPER})
-                if (NOT DEFINED ${Camel})
-                    set(${Camel} ${${UPPER}} PARENT_SCOPE)
-                endif()
-            endif()
-        endforeach()
-    endif()
-endfunction()
-
-# Use Trezor master switch
-if (USE_DEVICE_TREZOR)
-    # Protobuf is required to build protobuf messages for Trezor
-    include(FindProtobuf OPTIONAL)
-    find_package(Protobuf)
-    _trezor_protobuf_fix_vars()
-
-    # Protobuf handling the cache variables set in docker.
-    if(NOT Protobuf_FOUND AND NOT Protobuf_LIBRARY AND NOT Protobuf_PROTOC_EXECUTABLE AND NOT Protobuf_INCLUDE_DIR)
-        message(STATUS "Could not find Protobuf")
-    elseif(NOT Protobuf_LIBRARY OR NOT EXISTS "${Protobuf_LIBRARY}")
-        message(STATUS "Protobuf library not found: ${Protobuf_LIBRARY}")
-        unset(Protobuf_FOUND)
-    elseif(NOT Protobuf_PROTOC_EXECUTABLE OR NOT EXISTS "${Protobuf_PROTOC_EXECUTABLE}")
-        message(STATUS "Protobuf executable not found: ${Protobuf_PROTOC_EXECUTABLE}")
-        unset(Protobuf_FOUND)
-    elseif(NOT Protobuf_INCLUDE_DIR OR NOT EXISTS "${Protobuf_INCLUDE_DIR}")
-        message(STATUS "Protobuf include dir not found: ${Protobuf_INCLUDE_DIR}")
-        unset(Protobuf_FOUND)
-    else()
-        message(STATUS "Protobuf lib: ${Protobuf_LIBRARY}, inc: ${Protobuf_INCLUDE_DIR}, protoc: ${Protobuf_PROTOC_EXECUTABLE}")
-        set(Protobuf_INCLUDE_DIRS ${Protobuf_INCLUDE_DIR})
-        set(Protobuf_FOUND 1)  # override found if all rquired info was provided by variables
-    endif()
-
-    if(TREZOR_DEBUG)
-        set(USE_DEVICE_TREZOR_DEBUG 1)
-    endif()
-
-    # Compile debugging support (for tests)
-    if (USE_DEVICE_TREZOR_DEBUG)
-        add_definitions(-DWITH_TREZOR_DEBUGGING=1)
-    endif()
-else()
-    message(STATUS "Trezor support disabled by USE_DEVICE_TREZOR")
-endif()
-
-if(Protobuf_FOUND AND USE_DEVICE_TREZOR)
-    if (NOT "$ENV{TREZOR_PYTHON}" STREQUAL "")
-        set(TREZOR_PYTHON "$ENV{TREZOR_PYTHON}" CACHE INTERNAL "Copied from environment variable TREZOR_PYTHON")
-    else()
-        find_package(Python QUIET COMPONENTS Interpreter)  # cmake 3.12+
-        if(Python_Interpreter_FOUND)
-            set(TREZOR_PYTHON "${Python_EXECUTABLE}")
-        endif()
-    endif()
-
-    if(NOT TREZOR_PYTHON)
-        find_package(PythonInterp)
-        if(PYTHONINTERP_FOUND AND PYTHON_EXECUTABLE)
-            set(TREZOR_PYTHON "${PYTHON_EXECUTABLE}")
-        endif()
-    endif()
-
-    if(NOT TREZOR_PYTHON)
-        message(STATUS "Trezor: Python not found")
-    endif()
-endif()
-
-# Protobuf compilation test
-if(Protobuf_FOUND AND USE_DEVICE_TREZOR AND TREZOR_PYTHON)
-    execute_process(COMMAND ${Protobuf_PROTOC_EXECUTABLE} -I "${CMAKE_SOURCE_DIR}/cmake" -I "${Protobuf_INCLUDE_DIR}" "${CMAKE_SOURCE_DIR}/cmake/test-protobuf.proto" --cpp_out ${CMAKE_BINARY_DIR} RESULT_VARIABLE RET OUTPUT_VARIABLE OUT ERROR_VARIABLE ERR)
-    if(RET)
-        message(STATUS "Protobuf test generation failed: ${OUT} ${ERR}")
-    endif()
-
-    try_compile(Protobuf_COMPILE_TEST_PASSED
-        "${CMAKE_BINARY_DIR}"
-        SOURCES
-        "${CMAKE_BINARY_DIR}/test-protobuf.pb.cc"
-        "${CMAKE_SOURCE_DIR}/cmake/test-protobuf.cpp"
-        CMAKE_FLAGS
-        "-DINCLUDE_DIRECTORIES=${Protobuf_INCLUDE_DIR};${CMAKE_BINARY_DIR}"
-        "-DCMAKE_CXX_STANDARD=11"
-        LINK_LIBRARIES ${Protobuf_LIBRARY}
-        OUTPUT_VARIABLE OUTPUT
-    )
-    if(NOT Protobuf_COMPILE_TEST_PASSED)
-        message(STATUS "Protobuf Compilation test failed: ${OUTPUT}.")
-    endif()
-endif()
-
-# Try to build protobuf messages
-if(Protobuf_FOUND AND USE_DEVICE_TREZOR AND TREZOR_PYTHON AND Protobuf_COMPILE_TEST_PASSED)
-    set(ENV{PROTOBUF_INCLUDE_DIRS} "${Protobuf_INCLUDE_DIR}")
-    set(ENV{PROTOBUF_PROTOC_EXECUTABLE} "${Protobuf_PROTOC_EXECUTABLE}")
-    set(TREZOR_PROTOBUF_PARAMS "")
-    if (USE_DEVICE_TREZOR_DEBUG)
-        set(TREZOR_PROTOBUF_PARAMS "--debug")
-    endif()
-    
-    execute_process(COMMAND ${TREZOR_PYTHON} tools/build_protob.py ${TREZOR_PROTOBUF_PARAMS} WORKING_DIRECTORY ${CMAKE_CURRENT_LIST_DIR}/../src/device_trezor/trezor RESULT_VARIABLE RET OUTPUT_VARIABLE OUT ERROR_VARIABLE ERR)
-    if(RET)
-        message(WARNING "Trezor protobuf messages could not be regenerated (err=${RET}, python ${PYTHON})."
-                "OUT: ${OUT}, ERR: ${ERR}."
-                "Please read src/device_trezor/trezor/tools/README.md")
-    else()
-        message(STATUS "Trezor protobuf messages regenerated out: \"${OUT}.\"")
-        set(DEVICE_TREZOR_READY 1)
-        add_definitions(-DDEVICE_TREZOR_READY=1)
-        add_definitions(-DPROTOBUF_INLINE_NOT_IN_HEADERS=0)
-
-        if(CMAKE_BUILD_TYPE STREQUAL "Debug")
-            add_definitions(-DTREZOR_DEBUG=1)
-        endif()
-
-        if(USE_DEVICE_TREZOR_UDP_RELEASE)
-            add_definitions(-DUSE_DEVICE_TREZOR_UDP_RELEASE=1)
-        endif()
-
-        if (Protobuf_INCLUDE_DIR)
-            include_directories(${Protobuf_INCLUDE_DIR})
-        endif()
-
-        # LibUSB support, check for particular version
-        # Include support only if compilation test passes
-        if (USE_DEVICE_TREZOR_LIBUSB)
-            find_package(LibUSB)
-        endif()
-
-        if (LibUSB_COMPILE_TEST_PASSED)
-            add_definitions(-DHAVE_TREZOR_LIBUSB=1)
-            if(LibUSB_INCLUDE_DIRS)
-                include_directories(${LibUSB_INCLUDE_DIRS})
-            endif()
-        endif()
-
-        set(TREZOR_LIBUSB_LIBRARIES "")
-        if(LibUSB_COMPILE_TEST_PASSED)
-            list(APPEND TREZOR_LIBUSB_LIBRARIES ${LibUSB_LIBRARIES} ${LIBUSB_DEP_LINKER})
-            message(STATUS "Trezor compatible LibUSB found at: ${LibUSB_INCLUDE_DIRS}")
-        endif()
-
-        if (BUILD_GUI_DEPS)
-            set(TREZOR_DEP_LIBS "")
-            set(TREZOR_DEP_LINKER "")
-
-            if (Protobuf_LIBRARY)
-                list(APPEND TREZOR_DEP_LIBS ${Protobuf_LIBRARY})
-                string(APPEND TREZOR_DEP_LINKER " -lprotobuf")
-            endif()
-
-            if (TREZOR_LIBUSB_LIBRARIES)
-                list(APPEND TREZOR_DEP_LIBS ${TREZOR_LIBUSB_LIBRARIES})
-                string(APPEND TREZOR_DEP_LINKER " -lusb-1.0 ${LIBUSB_DEP_LINKER}")
-            endif()
-        endif()
-    endif()
-endif()

cmake/Doxyfile.in

@@ -18,7 +18,7 @@
 # that follow. The default is UTF-8 which is also the encoding used for all 
 # text before the first occurrence of this tag. Doxygen uses libiconv (or the 
 # iconv built into libc) for the transcoding. See 
-# https://www.gnu.org/software/libiconv for the list of possible encodings.
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
 
 DOXYFILE_ENCODING      = UTF-8
 
@@ -242,7 +242,7 @@ EXTENSION_MAPPING      =
 
 # If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all 
 # comments according to the Markdown format, which allows for more readable 
-# documentation. See https://daringfireball.net/projects/markdown/ for details. 
+# documentation. See http://daringfireball.net/projects/markdown/ for details. 
 # The output of markdown processing is further processed by doxygen, so you 
 # can mix doxygen, HTML, and XML commands with Markdown formatting. 
 # Disable only in case of backward compatibilities issues.
@@ -589,7 +589,7 @@ LAYOUT_FILE            =
 # containing the references data. This must be a list of .bib files. The 
 # .bib extension is automatically appended if omitted. Using this command 
 # requires the bibtex tool to be installed. See also 
-# https://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style 
+# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style 
 # of the bibliography can be controlled using LATEX_BIB_STYLE. To use this 
 # feature you need bibtex and perl available in the search path.
 
@@ -665,7 +665,7 @@ INPUT                  = ../README.md \
 # This tag can be used to specify the character encoding of the source files 
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is 
 # also the default input encoding. Doxygen uses libiconv (or the iconv built 
-# into libc) for the transcoding. See https://www.gnu.org/software/libiconv for 
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for 
 # the list of possible encodings.
 
 INPUT_ENCODING         = UTF-8
@@ -833,7 +833,7 @@ REFERENCES_LINK_SOURCE = YES
 # If the USE_HTAGS tag is set to YES then the references to source code 
 # will point to the HTML generated by the htags(1) tool instead of doxygen 
 # built-in source browser. The htags tool is part of GNU's global source 
-# tagging system (see https://www.gnu.org/software/global/global.html). You 
+# tagging system (see http://www.gnu.org/software/global/global.html). You 
 # will need version 4.8.6 or higher.
 
 USE_HTAGS              = NO
@@ -928,7 +928,7 @@ HTML_EXTRA_FILES       =
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. 
 # Doxygen will adjust the colors in the style sheet and background images 
 # according to this color. Hue is specified as an angle on a colorwheel, 
-# see https://en.wikipedia.org/wiki/Hue for more information. 
+# see http://en.wikipedia.org/wiki/Hue for more information. 
 # For instance the value 0 represents red, 60 is yellow, 120 is green, 
 # 180 is cyan, 240 is blue, 300 purple, and 360 is red again. 
 # The allowed range is 0 to 359.
@@ -981,7 +981,7 @@ HTML_INDEX_NUM_ENTRIES = 100
 # directory and running "make install" will install the docset in 
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find 
 # it at startup. 
-# See https://developer.apple.com/tools/creatingdocsetswithdoxygen.html 
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html 
 # for more information.
 
 GENERATE_DOCSET        = NO
@@ -1179,7 +1179,7 @@ FORMULA_FONTSIZE       = 10
 FORMULA_TRANSPARENT    = YES
 
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax 
-# (see https://www.mathjax.org) which uses client side Javascript for the 
+# (see http://www.mathjax.org) which uses client side Javascript for the 
 # rendering instead of using prerendered bitmaps. Use this if you do not 
 # have LaTeX installed or if you want to formulas look prettier in the HTML 
 # output. When enabled you may also need to install MathJax separately and 
@@ -1194,9 +1194,9 @@ USE_MATHJAX            = NO
 # MATHJAX_RELPATH should be ../mathjax. The default value points to 
 # the MathJax Content Delivery Network so you can quickly see the result without 
 # installing MathJax.  However, it is strongly recommended to install a local 
-# copy of MathJax from https://www.mathjax.org before deployment.
+# copy of MathJax from http://www.mathjax.org before deployment.
 
-MATHJAX_RELPATH        = https://cdn.mathjax.org/mathjax/latest
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
 
 # The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension 
 # names that should be enabled during MathJax rendering.
@@ -1318,7 +1318,7 @@ LATEX_SOURCE_CODE      = NO
 
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the 
 # bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See 
-# https://en.wikipedia.org/wiki/BibTeX for more info.
+# http://en.wikipedia.org/wiki/BibTeX for more info.
 
 LATEX_BIB_STYLE        = plain
 

cmake/FindBacktrace.cmake

@@ -1,98 +0,0 @@
-# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
-# file Copyright.txt or https://cmake.org/licensing for details.
-
-#.rst:
-# FindBacktrace
-# -------------
-#
-# Find provider for backtrace(3).
-#
-# Checks if OS supports backtrace(3) via either libc or custom library.
-# This module defines the following variables:
-#
-# ``Backtrace_HEADER``
-#   The header file needed for backtrace(3). Cached.
-#   Could be forcibly set by user.
-# ``Backtrace_INCLUDE_DIRS``
-#   The include directories needed to use backtrace(3) header.
-# ``Backtrace_LIBRARIES``
-#   The libraries (linker flags) needed to use backtrace(3), if any.
-# ``Backtrace_FOUND``
-#   Is set if and only if backtrace(3) support detected.
-#
-# The following cache variables are also available to set or use:
-#
-# ``Backtrace_LIBRARY``
-#   The external library providing backtrace, if any.
-# ``Backtrace_INCLUDE_DIR``
-#   The directory holding the backtrace(3) header.
-#
-# Typical usage is to generate of header file using configure_file() with the
-# contents like the following::
-#
-#  #cmakedefine01 Backtrace_FOUND
-#  #if Backtrace_FOUND
-#  # include <${Backtrace_HEADER}>
-#  #endif
-#
-# And then reference that generated header file in actual source.
-
-include(CMakePushCheckState)
-include(CheckSymbolExists)
-include(FindPackageHandleStandardArgs)
-
-# List of variables to be provided to find_package_handle_standard_args()
-set(_Backtrace_STD_ARGS Backtrace_INCLUDE_DIR)
-
-if(Backtrace_HEADER)
-  set(_Backtrace_HEADER_TRY "${Backtrace_HEADER}")
-else(Backtrace_HEADER)
-  set(_Backtrace_HEADER_TRY "execinfo.h")
-endif(Backtrace_HEADER)
-
-find_path(Backtrace_INCLUDE_DIR "${_Backtrace_HEADER_TRY}")
-set(Backtrace_INCLUDE_DIRS ${Backtrace_INCLUDE_DIR})
-
-if (NOT DEFINED Backtrace_LIBRARY)
-  # First, check if we already have backtrace(), e.g., in libc
-  cmake_push_check_state(RESET)
-  set(CMAKE_REQUIRED_INCLUDES ${Backtrace_INCLUDE_DIRS})
-  set(CMAKE_REQUIRED_QUIET ${Backtrace_FIND_QUIETLY})
-  check_symbol_exists("backtrace" "${_Backtrace_HEADER_TRY}" _Backtrace_SYM_FOUND)
-  cmake_pop_check_state()
-endif()
-
-if(_Backtrace_SYM_FOUND)
-  # Avoid repeating the message() call below each time CMake is run.
-  if(NOT Backtrace_FIND_QUIETLY AND NOT DEFINED Backtrace_LIBRARY)
-    message(STATUS "backtrace facility detected in default set of libraries")
-  endif()
-  set(Backtrace_LIBRARY "" CACHE FILEPATH "Library providing backtrace(3), empty for default set of libraries")
-else()
-  # Check for external library, for non-glibc systems
-  if(Backtrace_INCLUDE_DIR)
-    # OpenBSD has libbacktrace renamed to libexecinfo
-    find_library(Backtrace_LIBRARY "execinfo")
-  elseif()     # respect user wishes
-    set(_Backtrace_HEADER_TRY "backtrace.h")
-    find_path(Backtrace_INCLUDE_DIR ${_Backtrace_HEADER_TRY})
-    find_library(Backtrace_LIBRARY "backtrace")
-  endif()
-
-  # Prepend list with library path as it's more common practice
-  set(_Backtrace_STD_ARGS Backtrace_LIBRARY ${_Backtrace_STD_ARGS})
-endif()
-
-message(STATUS "Backtrace_LIBRARY: ${Backtrace_LIBRARY}")
-if(Backtrace_LIBRARY STREQUAL "NOTFOUND")
-  set(Backtrace_LIBRARY "")
-endif()
-if(Backtrace_LIBRARY STREQUAL "Backtrace_LIBRARY-NOTFOUND")
-  set(Backtrace_LIBRARY "")
-endif()
-
-set(Backtrace_LIBRARIES ${Backtrace_LIBRARY})
-set(Backtrace_HEADER "${_Backtrace_HEADER_TRY}" CACHE STRING "Header providing backtrace(3) facility")
-
-find_package_handle_standard_args(Backtrace FOUND_VAR Backtrace_FOUND REQUIRED_VARS ${_Backtrace_STD_ARGS})
-mark_as_advanced(Backtrace_HEADER Backtrace_INCLUDE_DIR Backtrace_LIBRARY)

cmake/FindBerkeleyDB.cmake

@@ -0,0 +1,25 @@
+# - Try to find Berkeley DB
+# Once done this will define
+#
+#  BERKELEY_DB_FOUND - system has Berkeley DB
+#  BERKELEY_DB_INCLUDE_DIR - the Berkeley DB include directory
+#  BERKELEY_DB_LIBRARIES - Link these to use Berkeley DB
+#  BERKELEY_DB_DEFINITIONS - Compiler switches required for using Berkeley DB
+
+# Copyright (c) 2006, Alexander Dymo, <adymo@kdevelop.org>
+#
+# Redistribution and use is allowed according to the terms of the BSD license.
+# For details see the accompanying COPYING-CMAKE-SCRIPTS file.
+
+find_path(BERKELEY_DB_INCLUDE_DIR db_cxx.h
+  /usr/include/db4
+  /usr/local/include/db4
+)
+
+find_library(BERKELEY_DB_LIBRARIES NAMES db_cxx )
+
+include(FindPackageHandleStandardArgs)
+find_package_handle_standard_args(Berkeley "Could not find Berkeley DB >= 4.1" BERKELEY_DB_INCLUDE_DIR BERKELEY_DB_LIBRARIES)
+# show the BERKELEY_DB_INCLUDE_DIR and BERKELEY_DB_LIBRARIES variables only in the advanced view
+mark_as_advanced(BERKELEY_DB_INCLUDE_DIR BERKELEY_DB_LIBRARIES )
+

cmake/FindCcache.cmake

@@ -1,60 +0,0 @@
-# Copyright (c) 2014-2020, The Monero Project
-#
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without modification, are
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of source code must retain the above copyright notice, this list of
-#    conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above copyright notice, this list
-#    of conditions and the following disclaimer in the documentation and/or other
-#    materials provided with the distribution.
-#
-# 3. Neither the name of the copyright holder nor the names of its contributors may be
-#    used to endorse or promote products derived from this software without specific
-#    prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# - Try to find readline include dirs and libraries 
-#
-# Automatically finds ccache build accelerator, if it's found in PATH.
-#
-# Usage of this module as follows:
-#
-#     project(monero)
-#     include(FindCcache) # Include AFTER the project() macro to be able to reach the CMAKE_CXX_COMPILER variable
-#
-# Properties modified by this module:
-#
-#  GLOBAL PROPERTY RULE_LAUNCH_COMPILE     set to ccache, when ccache found
-#  GLOBAL PROPERTY RULE_LAUNCH_LINK        set to ccache, when ccache found
-
-find_program(CCACHE_FOUND ccache)
-if (CCACHE_FOUND)
-	# Try to compile a test program with ccache, in order to verify if it really works. (needed on exotic setups)
-	# Create a temporary file with a simple program.
-	set(TEMP_CPP_FILE "${CMAKE_BINARY_DIR}/${CMAKE_FILES_DIRECTORY}/CMakeTmp/test-program.cpp")
-	file(WRITE "${TEMP_CPP_FILE}" "int main() { return 0; }")
-	# And run the found ccache on it.
-	execute_process(COMMAND "${CCACHE_FOUND}" "${CMAKE_CXX_COMPILER}" "${TEMP_CPP_FILE}"  RESULT_VARIABLE RET)
-	if (${RET} EQUAL 0)
-		# Success
-		message(STATUS "Found usable ccache: ${CCACHE_FOUND}")
-		set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE "${CCACHE_FOUND}")
-		set_property(GLOBAL PROPERTY RULE_LAUNCH_LINK    "${CCACHE_FOUND}")
-	else()
-		message(STATUS "Found ccache ${CCACHE_FOUND}, but is UNUSABLE! Return code: ${RET}")
-	endif()
-else()
-	message(STATUS "ccache NOT found! Please install it for faster rebuilds.")
-endif()

cmake/FindHIDAPI.cmake

@@ -1,60 +0,0 @@
-# - try to find HIDAPI library
-# from http://www.signal11.us/oss/hidapi/
-#
-# Cache Variables: (probably not for direct use in your scripts)
-#  HIDAPI_INCLUDE_DIR
-#  HIDAPI_LIBRARY
-#
-# Non-cache variables you might use in your CMakeLists.txt:
-#  HIDAPI_FOUND
-#  HIDAPI_INCLUDE_DIRS
-#  HIDAPI_LIBRARIES
-#
-# Requires these CMake modules:
-#  FindPackageHandleStandardArgs (known included with CMake >=2.6.2)
-#
-# Original Author:
-# 2009-2010 Ryan Pavlik <rpavlik@iastate.edu> <abiryan@ryand.net>
-# http://academic.cleardefinition.com
-# Iowa State University HCI Graduate Program/VRAC
-#
-# Copyright Iowa State University 2009-2010.
-# Distributed under the Boost Software License, Version 1.0.
-# (See accompanying file LICENSE_1_0.txt or copy at
-# http://www.boost.org/LICENSE_1_0.txt)
-
-find_library(HIDAPI_LIBRARY
-  NAMES hidapi hidapi-libusb)
-
-find_path(HIDAPI_INCLUDE_DIR
-  NAMES hidapi.h
-  PATH_SUFFIXES
-  hidapi)
-
-include(FindPackageHandleStandardArgs)
-find_package_handle_standard_args(HIDAPI
-  DEFAULT_MSG
-  HIDAPI_LIBRARY
-  HIDAPI_INCLUDE_DIR)
-
-if(HIDAPI_FOUND)
-  set(HIDAPI_LIBRARIES "${HIDAPI_LIBRARY}")
-  if((STATIC AND UNIX AND NOT APPLE) OR (DEPENDS AND CMAKE_SYSTEM_NAME STREQUAL "Linux"))
-    find_library(LIBUSB-1.0_LIBRARY usb-1.0)
-    find_library(LIBUDEV_LIBRARY udev)
-    if(LIBUSB-1.0_LIBRARY)
-      set(HIDAPI_LIBRARIES "${HIDAPI_LIBRARIES};${LIBUSB-1.0_LIBRARY}")
-      if(LIBUDEV_LIBRARY)
-        set(HIDAPI_LIBRARIES "${HIDAPI_LIBRARIES};${LIBUDEV_LIBRARY}")
-      else()
-        message(WARNING "libudev library not found, binaries may fail to link.")
-      endif()
-    else()
-      message(WARNING "libusb-1.0 library not found, binaries may fail to link.")
-    endif()
-  endif()
-
-  set(HIDAPI_INCLUDE_DIRS "${HIDAPI_INCLUDE_DIR}")
-endif()
-
-mark_as_advanced(HIDAPI_INCLUDE_DIR HIDAPI_LIBRARY)

cmake/FindLibUSB.cmake

@@ -1,155 +0,0 @@
-# - Find libusb for portable USB support
-# This module will find libusb as published by
-#  http://libusb.sf.net and
-#  http://libusb-win32.sf.net
-#
-# It will use PkgConfig if present and supported, else search
-# it on its own. If the LibUSB_ROOT_DIR environment variable
-# is defined, it will be used as base path.
-# The following standard variables get defined:
-#  LibUSB_FOUND:        true if LibUSB was found
-#  LibUSB_HEADER_FILE:  the location of the C header file
-#  LibUSB_INCLUDE_DIRS: the directory that contains the include file
-#  LibUSB_LIBRARIES:    the library
-# source: https://github.com/IntelRealSense/librealsense
-
-include ( CheckLibraryExists )
-include ( CheckIncludeFile )
-
-find_package ( PkgConfig )
-if ( PKG_CONFIG_FOUND )
-    pkg_check_modules ( PKGCONFIG_LIBUSB libusb-1.0 )
-    if ( NOT PKGCONFIG_LIBUSB_FOUND )
-        pkg_check_modules ( PKGCONFIG_LIBUSB libusb )
-    endif ( NOT PKGCONFIG_LIBUSB_FOUND )
-endif ( PKG_CONFIG_FOUND )
-
-if ( PKGCONFIG_LIBUSB_FOUND )
-    set ( LibUSB_INCLUDE_DIRS ${PKGCONFIG_LIBUSB_INCLUDE_DIRS} )
-    foreach ( i ${PKGCONFIG_LIBUSB_LIBRARIES} )
-        string ( REGEX MATCH "[^-]*" ibase "${i}" )
-        find_library ( ${ibase}_LIBRARY
-                NAMES ${i}
-                PATHS ${PKGCONFIG_LIBUSB_LIBRARY_DIRS}
-                )
-        if ( ${ibase}_LIBRARY )
-            list ( APPEND LibUSB_LIBRARIES ${${ibase}_LIBRARY} )
-        endif ( ${ibase}_LIBRARY )
-        mark_as_advanced ( ${ibase}_LIBRARY )
-    endforeach ( i )
-
-else ( PKGCONFIG_LIBUSB_FOUND )
-    find_file ( LibUSB_HEADER_FILE
-            NAMES
-            libusb.h usb.h
-            PATHS
-            $ENV{ProgramFiles}/LibUSB-Win32
-            $ENV{LibUSB_ROOT_DIR}
-            PATH_SUFFIXES
-            include
-            libusb-1.0
-            include/libusb-1.0
-            )
-    mark_as_advanced ( LibUSB_HEADER_FILE )
-    get_filename_component ( LibUSB_INCLUDE_DIRS "${LibUSB_HEADER_FILE}" PATH )
-
-    if ( ${CMAKE_SYSTEM_NAME} STREQUAL "Windows" )
-        # LibUSB-Win32 binary distribution contains several libs.
-        # Use the lib that got compiled with the same compiler.
-        if ( MSVC )
-            if ( WIN32 )
-                set ( LibUSB_LIBRARY_PATH_SUFFIX lib/msvc )
-            else ( WIN32 )
-                set ( LibUSB_LIBRARY_PATH_SUFFIX lib/msvc_x64 )
-            endif ( WIN32 )
-        elseif ( BORLAND )
-            set ( LibUSB_LIBRARY_PATH_SUFFIX lib/bcc )
-        elseif ( CMAKE_COMPILER_IS_GNUCC )
-            set ( LibUSB_LIBRARY_PATH_SUFFIX lib/gcc )
-        endif ( MSVC )
-    endif ( ${CMAKE_SYSTEM_NAME} STREQUAL "Windows" )
-
-    find_library ( usb_LIBRARY
-            NAMES
-            usb-1.0 libusb usb
-            PATHS
-            $ENV{ProgramFiles}/LibUSB-Win32
-            $ENV{LibUSB_ROOT_DIR}
-            PATH_SUFFIXES
-            ${LibUSB_LIBRARY_PATH_SUFFIX}
-            )
-    mark_as_advanced ( usb_LIBRARY )
-    if ( usb_LIBRARY )
-        set ( LibUSB_LIBRARIES ${usb_LIBRARY} )
-    endif ( usb_LIBRARY )
-
-endif ( PKGCONFIG_LIBUSB_FOUND )
-
-if ( LibUSB_INCLUDE_DIRS AND LibUSB_LIBRARIES )
-    set ( LibUSB_FOUND true )
-endif ( LibUSB_INCLUDE_DIRS AND LibUSB_LIBRARIES )
-
-if ( LibUSB_FOUND )
-    set ( CMAKE_REQUIRED_INCLUDES "${LibUSB_INCLUDE_DIRS}" )
-    check_include_file ( "${LibUSB_HEADER_FILE}" LibUSB_FOUND )
-endif ( LibUSB_FOUND )
-
-if ( LibUSB_FOUND )
-    check_library_exists ( "${LibUSB_LIBRARIES}" usb_open "" LibUSB_FOUND )
-    check_library_exists ( "${LibUSB_LIBRARIES}" libusb_get_device_list "" LibUSB_VERSION_1.0 )
-    check_library_exists ( "${LibUSB_LIBRARIES}" libusb_get_port_numbers "" LibUSB_VERSION_1.0.16 )
-
-    if((STATIC AND UNIX AND NOT APPLE) OR (DEPENDS AND CMAKE_SYSTEM_NAME STREQUAL "Linux"))
-        find_library(LIBUDEV_LIBRARY udev)
-        if(LIBUDEV_LIBRARY)
-            set(LibUSB_LIBRARIES "${LibUSB_LIBRARIES};${LIBUDEV_LIBRARY}")
-        else()
-            message(WARNING "libudev library not found, binaries may fail to link.")
-        endif()
-    endif()
-
-    # Library 1.0.16+ compilation test.
-    # The check_library_exists does not work well on Apple with shared libs.
-    if (APPLE OR LibUSB_VERSION_1.0.16 OR STATIC)
-        if (APPLE)
-            if(DEPENDS)
-                list(APPEND TEST_COMPILE_EXTRA_LIBRARIES "-framework Foundation -framework IOKit")
-            else()
-                find_library(COREFOUNDATION CoreFoundation)
-                find_library(IOKIT IOKit)
-                list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${IOKIT})
-                list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${COREFOUNDATION})
-
-                if(STATIC)
-                    find_library(OBJC objc.a)
-                    set(LIBUSB_DEP_LINKER ${OBJC})
-                    list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${LIBUSB_DEP_LINKER})
-                endif()
-            endif()
-        endif()
-        if (WIN32)
-            list(APPEND TEST_COMPILE_EXTRA_LIBRARIES setupapi)
-        endif()
-        list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${LibUSB_LIBRARIES})
-
-        try_compile(LibUSB_COMPILE_TEST_PASSED
-                ${CMAKE_BINARY_DIR}
-                "${CMAKE_SOURCE_DIR}/cmake/test-libusb-version.c"
-                CMAKE_FLAGS
-                    "-DINCLUDE_DIRECTORIES=${LibUSB_INCLUDE_DIRS}"
-                    "-DLINK_DIRECTORIES=${LibUSB_LIBRARIES}"
-                LINK_LIBRARIES ${TEST_COMPILE_EXTRA_LIBRARIES}
-                OUTPUT_VARIABLE OUTPUT)
-        unset(TEST_COMPILE_EXTRA_LIBRARIES)
-        message(STATUS "LibUSB Compilation test: ${LibUSB_COMPILE_TEST_PASSED}")
-    endif()
-endif ( LibUSB_FOUND )
-
-if ( NOT LibUSB_FOUND )
-    if ( NOT LibUSB_FIND_QUIETLY )
-        message ( STATUS "LibUSB not found, try setting LibUSB_ROOT_DIR environment variable." )
-    endif ( NOT LibUSB_FIND_QUIETLY )
-    if ( LibUSB_FIND_REQUIRED )
-        message ( FATAL_ERROR "" )
-    endif ( LibUSB_FIND_REQUIRED )
-endif ( NOT LibUSB_FOUND )

cmake/FindPCSC.cmake

@@ -0,0 +1,53 @@
+# - Find PCSC
+# Find the native PCSC includes and library
+#
+#  PCSC_INCLUDE_DIR - where to find winscard.h, wintypes.h, etc.
+#  PCSC_LIBRARIES   - List of libraries when using PCSC.
+#  PCSC_FOUND       - True if PCSC found.
+
+
+IF (PCSC_INCLUDE_DIR AND PCSC_LIBRARIES)
+  # Already in cache, be silent
+  SET(PCSC_FIND_QUIETLY TRUE)
+ENDIF (PCSC_INCLUDE_DIR AND PCSC_LIBRARIES)
+
+IF (NOT WIN32)
+  FIND_PACKAGE(PkgConfig)
+  PKG_CHECK_MODULES(PC_PCSC libpcsclite)
+
+  FIND_PATH(PCSC_INCLUDE_DIR winscard.h
+    HINTS
+    /usr/include/PCSC
+    ${PC_PCSC_INCLUDEDIR}
+    ${PC_PCSC_INCLUDE_DIRS}
+    PATH_SUFFIXES PCSC
+  )
+
+  FIND_LIBRARY(PCSC_LIBRARY NAMES pcsclite libpcsclite PCSC
+    HINTS
+    ${PC_PCSC_LIBDIR}
+    ${PC_PCSC_LIBRARY_DIRS}
+  )
+
+ELSE (NOT WIN32)
+  IF(BUILD_64 STREQUAL "ON")
+    set(PCSC_INCLUDE_DIR /mingw64/x86_64-w64-mingw32/include)
+    set(PCSC_LIBRARY /mingw64/x86_64-w64-mingw32/lib/libwinscard.a)
+  ELSE(BUILD_64 STREQUAL "ON")
+    set(PCSC_INCLUDE_DIR /mingw32/i686-w64-mingw32/include)
+    set(PCSC_LIBRARY /mingw32/i686-w64-mingw32/lib/libwinscard.a)
+  ENDIF(BUILD_64 STREQUAL "ON")
+ENDIF (NOT WIN32)
+
+# handle the QUIETLY and REQUIRED arguments and set PCSC_FOUND to TRUE if 
+# all listed variables are TRUE
+INCLUDE(FindPackageHandleStandardArgs)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(PCSC DEFAULT_MSG PCSC_LIBRARY PCSC_INCLUDE_DIR)
+
+IF(PCSC_FOUND)
+  SET( PCSC_LIBRARIES ${PCSC_LIBRARY} )
+ELSE(PCSC_FOUND)
+  SET( PCSC_LIBRARIES )
+ENDIF(PCSC_FOUND)
+
+MARK_AS_ADVANCED( PCSC_LIBRARY PCSC_INCLUDE_DIR )

cmake/FindReadline.cmake

@@ -23,7 +23,7 @@
 
 find_path(Readline_ROOT_DIR
     NAMES include/readline/readline.h
-    PATHS /usr/local/opt/readline/ /opt/local/ /usr/local/ /usr/
+    PATHS /opt/local/ /usr/local/ /usr/
     NO_DEFAULT_PATH
 )
 
@@ -66,9 +66,7 @@ check_function_exists(rl_copy_text HAVE_COPY_TEXT)
 check_function_exists(rl_filename_completion_function HAVE_COMPLETION_FUNCTION)
 
 if(NOT HAVE_COMPLETION_FUNCTION)
-  if (Readline_LIBRARY)
-    set(CMAKE_REQUIRED_LIBRARIES ${Readline_LIBRARY} ${Termcap_LIBRARY})
-  endif(Readline_LIBRARY)
+  set(CMAKE_REQUIRED_LIBRARIES ${Readline_LIBRARY} ${Termcap_LIBRARY})
   check_function_exists(rl_copy_text HAVE_COPY_TEXT_TC)
   check_function_exists(rl_filename_completion_function HAVE_COMPLETION_FUNCTION_TC)
   set(HAVE_COMPLETION_FUNCTION ${HAVE_COMPLETION_FUNCTION_TC})

cmake/FindUnbound.cmake

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2020, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 # All rights reserved.
 # 
 # Redistribution and use in source and binary forms, with or without modification, are

cmake/GenVersion.cmake

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2020, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 # 
 # All rights reserved.
 # 
@@ -29,43 +29,35 @@
 # Parts of this file are originally copyright (c) 2012-2013 The Cryptonote developers
 
 # Check what commit we're on
+execute_process(COMMAND "${GIT}" rev-parse --short HEAD RESULT_VARIABLE RET OUTPUT_VARIABLE COMMIT OUTPUT_STRIP_TRAILING_WHITESPACE)
 
-function (get_version_tag_from_git GIT)
-    execute_process(COMMAND "${GIT}" rev-parse --short=9 HEAD
-                    WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
-                    RESULT_VARIABLE RET
-                    OUTPUT_VARIABLE COMMIT
-                    OUTPUT_STRIP_TRAILING_WHITESPACE)
-
-    if(RET)
-        # Something went wrong, set the version tag to -unknown
-
-        message(WARNING "Cannot determine current commit. Make sure that you are building either from a Git working tree or from a source archive.")
-        set(VERSIONTAG "unknown")
-        set(VERSION_IS_RELEASE "false")
+if(RET)
+	# Something went wrong, set the version tag to -unknown
+	
+    message(WARNING "Cannot determine current commit. Make sure that you are building either from a Git working tree or from a source archive.")
+    set(VERSIONTAG "unknown")
+    configure_file("src/version.cpp.in" "${TO}")
+else()
+	message(STATUS "You are currently on commit ${COMMIT}")
+	
+	# Get all the tags
+	execute_process(COMMAND "${GIT}" rev-list --tags --max-count=1 --abbrev-commit RESULT_VARIABLE RET OUTPUT_VARIABLE TAGGEDCOMMIT OUTPUT_STRIP_TRAILING_WHITESPACE)
+	
+    if(NOT TAGGEDCOMMIT)
+        message(WARNING "Cannot determine most recent tag. Make sure that you are building either from a Git working tree or from a source archive.")
+        set(VERSIONTAG "${COMMIT}")
     else()
-        string(SUBSTRING ${COMMIT} 0 9 COMMIT)
-        message(STATUS "You are currently on commit ${COMMIT}")
-
-        # Get all the tags
-        execute_process(COMMAND "${GIT}" tag -l --points-at HEAD
-                        WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
-                        RESULT_VARIABLE RET
-                        OUTPUT_VARIABLE TAG
-                        OUTPUT_STRIP_TRAILING_WHITESPACE)
-
+        message(STATUS "The most recent tag was at ${TAGGEDCOMMIT}")
+        
         # Check if we're building that tagged commit or a different one
-        if(TAG)
+        if(COMMIT STREQUAL TAGGEDCOMMIT)
             message(STATUS "You are building a tagged release")
             set(VERSIONTAG "release")
-            set(VERSION_IS_RELEASE "true")
         else()
             message(STATUS "You are ahead of or behind a tagged release")
             set(VERSIONTAG "${COMMIT}")
-            set(VERSION_IS_RELEASE "false")
-        endif()	    
-    endif()
+        endif()
+    endif()	    
 
-    set(VERSIONTAG "${VERSIONTAG}" PARENT_SCOPE)
-    set(VERSION_IS_RELEASE "${VERSION_IS_RELEASE}" PARENT_SCOPE)
-endfunction()
+    configure_file("src/version.cpp.in" "${TO}")
+endif()

cmake/SetClangTidy.cmake

@@ -1,72 +0,0 @@
-# Copyright (c) 2014-2020, The Monero Project
-#
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without modification, are
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of source code must retain the above copyright notice, this list of
-#    conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above copyright notice, this list
-#    of conditions and the following disclaimer in the documentation and/or other
-#    materials provided with the distribution.
-#
-# 3. Neither the name of the copyright holder nor the names of its contributors may be
-#    used to endorse or promote products derived from this software without specific
-#    prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# https://cmake.org/cmake/help/latest/variable/CMAKE_LANG_CLANG_TIDY.html
-# This module sets the following variables:
-# CMAKE_C_CLANG_TIDY
-# CMAKE_CXX_CLANG_TIDY
-# when clang-tidy is found in PATH. Afterwards, the code is being linted by the tool.
-# The checks to be enabled can be manipulated with the variable MONERO_CLANG_TIDY_CHECKS
-
-macro (monero_clang_tidy LANGUAGE)
-	set(TOOL_NAME "clang-tidy")
-	set(MONERO_CLANG_TIDY_MIN_VERSION "3.6")
-	if(${CMAKE_VERSION} VERSION_LESS "${MONERO_CLANG_TIDY_MIN_VERSION}")
-		message(FATAL_ERROR "Sorry, ${TOOL_NAME} is available for CMake from version ${MONERO_CLANG_TIDY_MIN_VERSION}")
-	else()
-		message(STATUS "Trying to enable ${TOOL_NAME}")
-		find_program(MONERO_CLANG_BIN ${TOOL_NAME})
-		if(NOT MONERO_CLANG_BIN)
-			message(FATAL_ERROR "${TOOL_NAME} not found! Try running: sudo apt install ${TOOL_NAME}")
-		else()
-			message(STATUS "Found ${MONERO_CLANG_BIN}")
-			set(MONERO_CLANG_TIDY_CHECKS
-			    -header-filter=.; 	# By default the headers are excluded. This line enables them.
-			    -checks=*; 		# Currently enabling all checks
-			    # An example of selectively enabling checks:
-			    #-checks=bugprone-*,cppcoreguidelines-avoid-goto # Have to be in one line :(
-			)
-			# Current list of checks is avaibale under:
-			# https://clang.llvm.org/extra/clang-tidy/
-			if (${LANGUAGE} STREQUAL "C")
-				set(CMAKE_C_CLANG_TIDY
-					${MONERO_CLANG_BIN}; # Mind the semicolon
-					${MONERO_CLANG_TIDY_CHECKS}
-				)
-			elseif (${LANGUAGE} STREQUAL "CXX")
-				set(CMAKE_CXX_CLANG_TIDY
-					${MONERO_CLANG_BIN}; # Mind the semicolon
-					${MONERO_CLANG_TIDY_CHECKS}
-				)
-			else()
-				message(FATAL_ERROR "${TOOL_NAME}: Unsupported language: ${LANGUAGE}")
-			endif()
-		endif()
-	endif()
-endmacro()
-

cmake/Version.cmake

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2020, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 # 
 # All rights reserved.
 # 
@@ -26,25 +26,27 @@
 # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-function (write_version tag)
-  set(VERSIONTAG "${tag}" CACHE STRING "The tag portion of the Monero software version" FORCE)
-  configure_file("${CMAKE_CURRENT_LIST_DIR}/../src/version.cpp.in" "${CMAKE_BINARY_DIR}/version.cpp")
+function (write_static_version_header hash)
+  set(VERSIONTAG "${hash}")
+  configure_file("${CMAKE_SOURCE_DIR}/src/version.cpp.in" "${CMAKE_BINARY_DIR}/version.cpp")
 endfunction ()
 
 find_package(Git QUIET)
 if ("$Format:$" STREQUAL "")
   # We're in a tarball; use hard-coded variables.
-  set(VERSION_IS_RELEASE "true")
-  write_version("release")
+  write_static_version_header("release")
 elseif (GIT_FOUND OR Git_FOUND)
   message(STATUS "Found Git: ${GIT_EXECUTABLE}")
-  include(GitVersion)
-  get_version_tag_from_git("${GIT_EXECUTABLE}")
-  write_version("${VERSIONTAG}")
+  add_custom_command(
+    OUTPUT            "${CMAKE_BINARY_DIR}/version.cpp"
+    COMMAND           "${CMAKE_COMMAND}"
+                      "-D" "GIT=${GIT_EXECUTABLE}"
+                      "-D" "TO=${CMAKE_BINARY_DIR}/version.cpp"
+                      "-P" "cmake/GenVersion.cmake"
+    WORKING_DIRECTORY "${CMAKE_SOURCE_DIR}")
 else()
   message(STATUS "WARNING: Git was not found!")
-  set(VERSION_IS_RELEASE "false")
-  write_version("unknown")
+  write_static_version_header("unknown")
 endif ()
 add_custom_target(genversion ALL
   DEPENDS "${CMAKE_BINARY_DIR}/version.cpp")

cmake/test-libusb-version.c

@@ -1,52 +0,0 @@
-// Copyright (c) 2014-2020, The Monero Project
-// 
-// All rights reserved.
-// 
-// Redistribution and use in source and binary forms, with or without modification, are
-// permitted provided that the following conditions are met:
-// 
-// 1. Redistributions of source code must retain the above copyright notice, this list of
-//    conditions and the following disclaimer.
-// 
-// 2. Redistributions in binary form must reproduce the above copyright notice, this list
-//    of conditions and the following disclaimer in the documentation and/or other
-//    materials provided with the distribution.
-// 
-// 3. Neither the name of the copyright holder nor the names of its contributors may be
-//    used to endorse or promote products derived from this software without specific
-//    prior written permission.
-// 
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#include <libusb.h>
-
-#define UNUSED(expr) (void)(expr)
-
-int main(int argc, char *argv[]) {
-  libusb_device **devs;
-  libusb_context *ctx = NULL;
-
-  int r = libusb_init(&ctx); UNUSED(r);
-  ssize_t cnt = libusb_get_device_list(ctx, &devs); UNUSED(cnt);
-
-  struct libusb_device_descriptor desc;
-  r = libusb_get_device_descriptor(devs[0], &desc); UNUSED(r);
-  uint8_t bus_id = libusb_get_bus_number(devs[0]); UNUSED(bus_id);
-  uint8_t addr = libusb_get_device_address(devs[0]); UNUSED(addr);
-
-  uint8_t tmp_path[16];
-  r = libusb_get_port_numbers(devs[0], tmp_path, sizeof(tmp_path));
-  UNUSED(r);
-  UNUSED(tmp_path);
-
-  libusb_free_device_list(devs, 1);
-  libusb_exit(ctx);
-}

cmake/test-protobuf.cpp

@@ -1,43 +0,0 @@
-// Copyright (c) 2014-2020, The Monero Project
-// 
-// All rights reserved.
-// 
-// Redistribution and use in source and binary forms, with or without modification, are
-// permitted provided that the following conditions are met:
-// 
-// 1. Redistributions of source code must retain the above copyright notice, this list of
-//    conditions and the following disclaimer.
-// 
-// 2. Redistributions in binary form must reproduce the above copyright notice, this list
-//    of conditions and the following disclaimer in the documentation and/or other
-//    materials provided with the distribution.
-// 
-// 3. Neither the name of the copyright holder nor the names of its contributors may be
-//    used to endorse or promote products derived from this software without specific
-//    prior written permission.
-// 
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#include <string>
-#include <iostream>
-#include <google/protobuf/message.h>
-#include <google/protobuf/unknown_field_set.h>
-#include "test-protobuf.pb.h"
-
-int main(int argc, char *argv[]) {
-  google::protobuf::UnknownFieldSet ufs;
-  ufs.ClearAndFreeMemory();
-
-  Success sc;
-  sc.set_message("test");
-  sc.SerializeToOstream(&std::cerr);
-  return 0;
-}

cmake/test-protobuf.proto

@@ -1,7 +0,0 @@
-syntax = "proto2";
-
-import "google/protobuf/descriptor.proto";
-
-message Success {
-    optional string message = 1;
-}

cmake/test-static-assert.c

@@ -1,4 +1,4 @@
-// Copyright (c) 2014-2020, The Monero Project
+// Copyright (c) 2014-2018, The Monero Project
 // 
 // All rights reserved.
 // 

cmake/test-static-assert.cpp

@@ -1,4 +1,4 @@
-// Copyright (c) 2014-2020, The Monero Project
+// Copyright (c) 2014-2018, The Monero Project
 // 
 // All rights reserved.
 // 

contrib/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2020, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 # 
 # All rights reserved.
 # 
@@ -26,5 +26,10 @@
 # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+# warnings are cleared only for GCC on Linux
+if (NOT (MINGW OR APPLE OR FREEBSD OR OPENBSD OR DRAGONFLY))
+  add_compile_options("${WARNINGS_AS_ERRORS_FLAG}") # applies only to targets that follow
+endif()
+
 add_subdirectory(epee)
 

contrib/brew/Brewfile

@@ -1,34 +0,0 @@
-# Brewfile for Monero
-# A homebrew Brewfile installs all required dependencies in one shot
-# see https://coderwall.com/p/afmnbq/homebrew-s-new-feature-brewfiles
-#     https://github.com/Homebrew/homebrew-bundle
-# execute brew bundle in the directory containing the Brewfile
-
-tap "homebrew/bundle"
-tap "homebrew/cask"
-tap "homebrew/cask-versions"
-tap "homebrew/core"
-
-brew "autoconf"
-brew "autogen"
-brew "automake"
-brew "binutils"
-brew "coreutils"
-brew "cmake"
-brew "pkg-config"
-brew "boost"
-brew "openssl"
-brew "hidapi"
-brew "zmq"
-brew "libpgm"
-brew "unbound"
-brew "libsodium"
-brew "miniupnpc"
-brew "readline"
-brew "ldns"
-brew "expat"
-brew "doxygen"
-brew "graphviz"
-brew "libunwind-headers"
-brew "xz"
-brew "protobuf"

contrib/depends/.gitignore

@@ -1,10 +0,0 @@
-SDKs/
-work/
-built/
-sources/
-config.site
-x86_64*
-i686*
-mips*
-arm*
-aarch64*

contrib/depends/Makefile

@@ -1,232 +0,0 @@
-.NOTPARALLEL :
-
-SOURCES_PATH ?= $(BASEDIR)/sources
-BASE_CACHE ?= $(BASEDIR)/built
-SDK_PATH ?= $(BASEDIR)/SDKs
-FALLBACK_DOWNLOAD_PATH ?= https://bitcoincore.org/depends-sources
-
-BUILD = $(shell ./config.guess)
-HOST ?= $(BUILD)
-PATCHES_PATH = $(BASEDIR)/patches
-BASEDIR = $(CURDIR)
-HASH_LENGTH:=11
-DOWNLOAD_CONNECT_TIMEOUT:=10
-DOWNLOAD_RETRIES:=3
-HOST_ID_SALT ?= salt
-BUILD_ID_SALT ?= salt
-
-host:=$(BUILD)
-ifneq ($(HOST),)
-host:=$(HOST)
-host_toolchain:=$(HOST)-
-endif
-
-ifneq ($(DEBUG),)
-release_type=Debug
-else
-release_type=Release
-endif
-
-ifneq ($(TESTS),)
-build_tests=ON
-release_type=Debug
-else
-build_tests=OFF
-endif
-
-base_build_dir=$(BASEDIR)/work/build
-base_staging_dir=$(BASEDIR)/work/staging
-base_download_dir=$(BASEDIR)/work/download
-canonical_host:=$(shell ./config.sub $(HOST))
-build:=$(shell ./config.sub $(BUILD))
-
-build_arch =$(firstword $(subst -, ,$(build)))
-build_vendor=$(word 2,$(subst -, ,$(build)))
-full_build_os:=$(subst $(build_arch)-$(build_vendor)-,,$(build))
-build_os:=$(findstring linux,$(full_build_os))
-build_os+=$(findstring darwin,$(full_build_os))
-build_os:=$(strip $(build_os))
-ifeq ($(build_os),)
-build_os=$(full_build_os)
-endif
-
-host_arch=$(firstword $(subst -, ,$(canonical_host)))
-host_vendor=$(word 2,$(subst -, ,$(canonical_host)))
-full_host_os:=$(subst $(host_arch)-$(host_vendor)-,,$(canonical_host))
-host_os:=$(findstring android,$(full_host_os))
-ifeq ($(host_os),)
-host_os:=$(findstring linux,$(full_host_os))
-endif
-host_os+=$(findstring darwin,$(full_host_os))
-host_os+=$(findstring freebsd,$(full_host_os))
-host_os+=$(findstring mingw32,$(full_host_os))
-host_os:=$(strip $(host_os))
-ifeq ($(host_os),)
-host_os=$(full_host_os)
-endif
-
-$(host_arch)_$(host_os)_prefix=$(BASEDIR)/$(host)
-$(host_arch)_$(host_os)_host=$(host)
-host_prefix=$($(host_arch)_$(host_os)_prefix)
-build_prefix=$(host_prefix)/native
-ifeq ($(host_os),mingw32)
-host_cmake=Windows
-endif
-ifeq ($(host_os),linux)
-host_cmake=Linux
-endif
-ifeq ($(host_os),freebsd)
-host_cmake=FreeBSD
-endif
-ifeq ($(host_os),darwin)
-host_cmake=Darwin
-endif
-ifeq ($(host_os),android)
-host_cmake=Android
-endif
-
-AT_$(V):=
-AT_:=@
-AT:=$(AT_$(V))
-
-all: install
-
-include hosts/$(host_os).mk
-include hosts/default.mk
-include builders/$(build_os).mk
-include builders/default.mk
-include packages/packages.mk
-
-build_id_string:=$(BUILD_ID_SALT)
-build_id_string+=$(shell $(build_CC) --version 2>/dev/null)
-build_id_string+=$(shell $(build_AR) --version 2>/dev/null)
-build_id_string+=$(shell $(build_CXX) --version 2>/dev/null)
-build_id_string+=$(shell $(build_RANLIB) --version 2>/dev/null)
-build_id_string+=$(shell $(build_STRIP) --version 2>/dev/null)
-
-$(host_arch)_$(host_os)_id_string:=$(HOST_ID_SALT)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_CC) --version 2>/dev/null)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_AR) --version 2>/dev/null)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_CXX) --version 2>/dev/null)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_RANLIB) --version 2>/dev/null)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_STRIP) --version 2>/dev/null)
-
-qt_packages_$(NO_QT) = $(qt_packages) 
-packages += $($(host_arch)_$(host_os)_packages) $($(host_os)_packages) $(qt_packages_)
-native_packages += $($(host_arch)_$(host_os)_native_packages) $($(host_os)_native_packages)
-
-all_packages = $(packages) $(native_packages)
-
-meta_depends = Makefile funcs.mk builders/default.mk hosts/default.mk hosts/$(host_os).mk builders/$(build_os).mk
-
-$(host_arch)_$(host_os)_native_toolchain?=$($(host_os)_native_toolchain)
-
-include funcs.mk
-
-CONF_PKGS := cmake-conf mxe-conf
-
-build-only-$(1)_$(3): CMAKE_RUNRESULT_FILE = $(PREFIX)/share/cmake/modules/TryRunResults.cmake
-build-only-$(1)_$(3): CMAKE_TOOLCHAIN_FILE = $(PREFIX)/$(3)/share/cmake/mxe-conf.cmake
-build-only-$(1)_$(3): CMAKE_TOOLCHAIN_DIR  = $(PREFIX)/$(3)/share/cmake/mxe-conf.d
-build-only-$(1)_$(3): CMAKE_STATIC_BOOL = $(if $(findstring shared,$(3)),OFF,ON)
-build-only-$(1)_$(3): CMAKE_SHARED_BOOL = $(if $(findstring shared,$(3)),ON,OFF)
-
-
-toolchain_path=$($($(host_arch)_$(host_os)_native_toolchain)_prefixbin)
-final_build_id_long+=$(shell $(build_SHA256SUM) config.site.in)
-final_build_id_long+=$(shell $(build_SHA256SUM) toolchain.cmake.in)
-final_build_id+=$(shell echo -n "$(final_build_id_long)" | $(build_SHA256SUM) | cut -c-$(HASH_LENGTH))
-$(host_prefix)/.stamp_$(final_build_id): $(native_packages) $(packages)
-	$(AT)rm -rf $(@D)
-	$(AT)mkdir -p $(@D)
-	$(AT)echo copying packages: $^
-	$(AT)echo to: $(@D)
-	$(AT)cd $(@D); $(foreach package,$^, tar xf $($(package)_cached); )
-	$(AT)touch $@
-
-$(host_prefix)/share/config.site : config.site.in $(host_prefix)/.stamp_$(final_build_id)
-	$(AT)@mkdir -p $(@D)
-	$(AT)sed -e 's|@HOST@|$(host)|' \
-            -e 's|@CC@|$(toolchain_path)$(host_CC)|' \
-            -e 's|@CXX@|$(toolchain_path)$(host_CXX)|' \
-            -e 's|@AR@|$(toolchain_path)$(host_AR)|' \
-            -e 's|@RANLIB@|$(toolchain_path)$(host_RANLIB)|' \
-            -e 's|@NM@|$(toolchain_path)$(host_NM)|' \
-            -e 's|@STRIP@|$(toolchain_path)$(host_STRIP)|' \
-            -e 's|@build_os@|$(build_os)|' \
-            -e 's|@host_os@|$(host_os)|' \
-            -e 's|@CFLAGS@|$(strip $(host_CFLAGS) $(host_$(release_type)_CFLAGS))|' \
-            -e 's|@CXXFLAGS@|$(strip $(host_CXXFLAGS) $(host_$(release_type)_CXXFLAGS))|' \
-            -e 's|@CPPFLAGS@|$(strip $(host_CPPFLAGS) $(host_$(release_type)_CPPFLAGS))|' \
-            -e 's|@LDFLAGS@|$(strip $(host_LDFLAGS) $(host_$(release_type)_LDFLAGS))|' \
-            -e 's|@allow_host_packages@|$(ALLOW_HOST_PACKAGES)|' \
-            -e 's|@debug@|$(DEBUG)|' \
-            $< > $@
-	$(AT)touch $@
-
-$(host_prefix)/share/toolchain.cmake : toolchain.cmake.in $(host_prefix)/.stamp_$(final_build_id)
-	$(AT)@mkdir -p $(@D)
-	$(AT)sed -e 's|@HOST@|$(host)|' \
-            -e 's|@CC@|$(toolchain_path)$(host_CC)|' \
-            -e 's|@CXX@|$(toolchain_path)$(host_CXX)|' \
-            -e 's|@AR@|$(toolchain_path)$(host_AR)|' \
-            -e 's|@RANLIB@|$(toolchain_path)$(host_RANLIB)|' \
-            -e 's|@NM@|$(toolchain_path)$(host_NM)|' \
-            -e 's|@STRIP@|$(toolchain_path)$(host_STRIP)|' \
-            -e 's|@build_os@|$(build_os)|' \
-            -e 's|@host_os@|$(host_os)|' \
-            -e 's|@CFLAGS@|$(strip $(host_CFLAGS) $(host_$(release_type)_CFLAGS))|' \
-            -e 's|@CXXFLAGS@|$(strip $(host_CXXFLAGS) $(host_$(release_type)_CXXFLAGS))|' \
-            -e 's|@CPPFLAGS@|$(strip $(host_CPPFLAGS) $(host_$(release_type)_CPPFLAGS))|' \
-            -e 's|@LDFLAGS@|$(strip $(host_LDFLAGS) $(host_$(release_type)_LDFLAGS))|' \
-            -e 's|@allow_host_packages@|$(ALLOW_HOST_PACKAGES)|' \
-            -e 's|@debug@|$(DEBUG)|' \
-            -e 's|@release_type@|$(release_type)|' \
-            -e 's|@build_tests@|$(build_tests)|' \
-            -e 's|@depends@|$(host_cmake)|' \
-            -e 's|@prefix@|$($(host_arch)_$(host_os)_prefix)|'\
-            -e 's|@sdk@|$(SDK_PATH)|'\
-            -e 's|@arch@|$(host_arch)|'\
-            $< > $@
-	$(AT)touch $@
-
-define check_or_remove_cached
-  mkdir -p $(BASE_CACHE)/$(host)/$(package) && cd $(BASE_CACHE)/$(host)/$(package); \
-  $(build_SHA256SUM) -c $($(package)_cached_checksum) >/dev/null 2>/dev/null || \
-  ( rm -f $($(package)_cached_checksum); \
-    if test -f "$($(package)_cached)"; then echo "Checksum mismatch for $(package). Forcing rebuild.."; rm -f $($(package)_cached_checksum) $($(package)_cached); fi )
-endef
-
-define check_or_remove_sources
-  mkdir -p $($(package)_source_dir); cd $($(package)_source_dir); \
-  test -f $($(package)_fetched) && ( $(build_SHA256SUM) -c $($(package)_fetched) >/dev/null 2>/dev/null || \
-    ( echo "Checksum missing or mismatched for $(package) source. Forcing re-download."; \
-      rm -f $($(package)_all_sources) $($(1)_fetched))) || true
-endef
-
-check-packages:
-	@$(foreach package,$(all_packages),$(call check_or_remove_cached,$(package));)
-check-sources:
-	@$(foreach package,$(all_packages),$(call check_or_remove_sources,$(package));)
-
-$(host_prefix)/share/config.site: check-packages
-$(host_prefix)/share/toolchain.cmake: check-packages
-
-check-packages: check-sources
-
-install: check-packages $(host_prefix)/share/config.site
-install: check-packages $(host_prefix)/share/toolchain.cmake
-
-download-one: check-sources $(all_sources)
-
-download-osx:
-	@$(MAKE) -s HOST=x86_64-apple-darwin11 download-one
-download-linux:
-	@$(MAKE) -s HOST=x86_64-unknown-linux-gnu download-one
-download-win:
-	@$(MAKE) -s HOST=x86_64-w64-mingw32 download-one
-download: download-osx download-linux download-win
-
- $(foreach package,$(all_packages),$(eval $(call ext_add_stages,$(package))))
-
-.PHONY: install cached download-one download-osx download-linux download-win download check-packages check-sources

contrib/depends/README.md

@@ -1,83 +0,0 @@
-### Usage
-
-To build dependencies for the current arch+OS:
-
-```bash
-make
-```
-
-To build for another arch/OS:
-
-```bash
-make HOST=host-platform-triplet
-```
-
-For example:
-
-```bash
-make HOST=x86_64-w64-mingw32 -j4
-```
-
-A toolchain will be generated that's suitable for plugging into Monero's
-cmake. In the above example, a dir named x86_64-w64-mingw32 will be
-created. To use it for Monero:
-
-```bash
-cmake -DCMAKE_TOOLCHAIN=`pwd`/contrib/depends/x86_64-w64-mingw32
-```
-
-Common `host-platform-triplets` for cross compilation are:
-
-- `i686-w64-mingw32` for Win32
-- `x86_64-w64-mingw32` for Win64
-- `x86_64-apple-darwin11` for MacOSX
-- `arm-linux-gnueabihf` for Linux ARM 32 bit
-- `aarch64-linux-gnu` for Linux ARM 64 bit
-- `riscv64-linux-gnu` for Linux RISCV 64 bit
-
-No other options are needed, the paths are automatically configured.
-
-Dependency Options:
-The following can be set when running make: make FOO=bar
-
-```
-SOURCES_PATH: downloaded sources will be placed here
-BASE_CACHE: built packages will be placed here
-SDK_PATH: Path where sdk's can be found (used by OSX)
-FALLBACK_DOWNLOAD_PATH: If a source file can't be fetched, try here before giving up
-DEBUG: disable some optimizations and enable more runtime checking
-HOST_ID_SALT: Optional salt to use when generating host package ids
-BUILD_ID_SALT: Optional salt to use when generating build package ids
-```
-
-Additional targets:
-
-```
-download: run 'make download' to fetch all sources without building them
-download-osx: run 'make download-osx' to fetch all sources needed for osx builds
-download-win: run 'make download-win' to fetch all sources needed for win builds
-download-linux: run 'make download-linux' to fetch all sources needed for linux builds
-```
-
-#Darwin (macos) builds:
-
-To build with the x86_64-apple-darwin11 you require the mac os developer tools in MacOSX10.11.sdk. 
-Download it from apple, or search for it on github. Create a new directoty called SDKs in this
-directory and place the entire MacOSX10.11.sdk folder in it. The depends build will then pick it up automatically
-(without requiring SDK_PATH). 
-
-
-#Mingw builds
-
-Building for 32/64bit mingw requires switching alternatives to a posix mode
-
-```bash
-update-alternatives --set x86_64-w64-mingw32-g++ x86_64-w64-mingw32-g++-posix
-update-alternatives --set x86_64-w64-mingw32-gcc x86_64-w64-mingw32-gcc-posix
-```
-
-### Other documentation
-
-- [description.md](description.md): General description of the depends system
-- [packages.md](packages.md): Steps for adding packages
-

contrib/depends/builders/darwin.mk

@@ -1,22 +0,0 @@
-build_darwin_CC: = $(shell xcrun -f clang)
-build_darwin_CXX: = $(shell xcrun -f clang++)
-build_darwin_AR: = $(shell xcrun -f ar)
-build_darwin_RANLIB: = $(shell xcrun -f ranlib)
-build_darwin_STRIP: = $(shell xcrun -f strip)
-build_darwin_OTOOL: = $(shell xcrun -f otool)
-build_darwin_NM: = $(shell xcrun -f nm)
-build_darwin_INSTALL_NAME_TOOL:=$(shell xcrun -f install_name_tool)
-build_darwin_SHA256SUM = shasum -a 256
-build_darwin_DOWNLOAD = curl --location --fail --connect-timeout $(DOWNLOAD_CONNECT_TIMEOUT) --retry $(DOWNLOAD_RETRIES) -o
-
-#darwin host on darwin builder. overrides darwin host preferences.
-darwin_CC=$(shell xcrun -f clang) -mmacosx-version-min=$(OSX_MIN_VERSION)
-darwin_CXX:=$(shell xcrun -f clang++) -mmacosx-version-min=$(OSX_MIN_VERSION) -stdlib=libc++
-darwin_AR:=$(shell xcrun -f ar)
-darwin_RANLIB:=$(shell xcrun -f ranlib)
-darwin_STRIP:=$(shell xcrun -f strip)
-darwin_LIBTOOL:=$(shell xcrun -f libtool)
-darwin_OTOOL:=$(shell xcrun -f otool)
-darwin_NM:=$(shell xcrun -f nm)
-darwin_INSTALL_NAME_TOOL:=$(shell xcrun -f install_name_tool)
-darwin_native_toolchain=

contrib/depends/builders/default.mk

@@ -1,20 +0,0 @@
-default_build_CC = gcc
-default_build_CXX = g++
-default_build_AR = ar
-default_build_RANLIB = ranlib
-default_build_STRIP = strip
-default_build_NM = nm
-default_build_OTOOL = otool
-default_build_INSTALL_NAME_TOOL = install_name_tool
-
-define add_build_tool_func
-build_$(build_os)_$1 ?= $$(default_build_$1)
-build_$(build_arch)_$(build_os)_$1 ?= $$(build_$(build_os)_$1)
-build_$1=$$(build_$(build_arch)_$(build_os)_$1)
-endef
-$(foreach var,CC CXX AR RANLIB NM STRIP SHA256SUM DOWNLOAD OTOOL INSTALL_NAME_TOOL,$(eval $(call add_build_tool_func,$(var))))
-define add_build_flags_func
-build_$(build_arch)_$(build_os)_$1 += $(build_$(build_os)_$1)
-build_$1=$$(build_$(build_arch)_$(build_os)_$1)
-endef
-$(foreach flags, CFLAGS CXXFLAGS ARFLAGS LDFLAGS, $(eval $(call add_build_flags_func,$(flags))))

contrib/depends/builders/linux.mk

@@ -1,2 +0,0 @@
-build_linux_SHA256SUM = sha256sum
-build_linux_DOWNLOAD = curl --location --fail --connect-timeout $(DOWNLOAD_CONNECT_TIMEOUT) --retry $(DOWNLOAD_RETRIES) -o

contrib/depends/config.site.in

@@ -1,81 +0,0 @@
-depends_prefix="`dirname ${ac_site_file}`/.."
-
-cross_compiling=maybe
-host_alias=@HOST@
-ac_tool_prefix=${host_alias}-
-
-if test -z $with_boost; then
-  with_boost=$depends_prefix
-fi
-if test -z $with_qt_plugindir; then
-  with_qt_plugindir=$depends_prefix/plugins
-fi
-if test -z $with_qt_translationdir; then
-  with_qt_translationdir=$depends_prefix/translations
-fi
-
-if test x@host_os@ = xdarwin; then
-  BREW=no
-  PORT=no
-fi
-
-if test x@host_os@ = xmingw32; then
-  if test -z $with_qt_incdir; then
-    with_qt_incdir=$depends_prefix/include
-  fi
-  if test -z $with_qt_libdir; then
-    with_qt_libdir=$depends_prefix/lib
-  fi
-fi
-
-PATH=$depends_prefix/native/bin:$PATH
-PKG_CONFIG="`which pkg-config` --static"
-
-# These two need to remain exported because pkg-config does not see them
-# otherwise. That means they must be unexported at the end of configure.ac to
-# avoid ruining the cache. Sigh.
-export PKG_CONFIG_PATH=$depends_prefix/share/pkgconfig:$depends_prefix/lib/pkgconfig
-if test -z "@allow_host_packages@"; then
-  export PKGCONFIG_LIBDIR=
-fi
-
-CPPFLAGS="-I$depends_prefix/include/ $CPPFLAGS"
-LDFLAGS="-L$depends_prefix/lib $LDFLAGS"
-
-CC="@CC@"
-CXX="@CXX@"
-OBJC="${CC}"
-CCACHE=$depends_prefix/native/bin/ccache
-PYTHONPATH=$depends_prefix/native/lib/python/dist-packages:$PYTHONPATH
-
-if test -n "@AR@"; then
-  AR=@AR@
-  ac_cv_path_ac_pt_AR=${AR}
-fi
-
-if test -n "@RANLIB@"; then
-  RANLIB=@RANLIB@
-  ac_cv_path_ac_pt_RANLIB=${RANLIB}
-fi
-
-if test -n "@NM@"; then
-  NM=@NM@
-  ac_cv_path_ac_pt_NM=${NM}
-fi
-
-if test -n "@debug@"; then
-  enable_reduce_exports=no
-fi
-
-if test -n "@CFLAGS@"; then
-  CFLAGS="@CFLAGS@ $CFLAGS"
-fi
-if test -n "@CXXFLAGS@"; then
-  CXXFLAGS="@CXXFLAGS@ $CXXFLAGS"
-fi
-if test -n "@CPPFLAGS@"; then
-  CPPFLAGS="@CPPFLAGS@ $CPPFLAGS"
-fi
-if test -n "@LDFLAGS@"; then
-  LDFLAGS="@LDFLAGS@ $LDFLAGS"
-fi

contrib/depends/description.md

@@ -1,53 +0,0 @@
-This is a system of building and caching dependencies necessary for building Bitcoin. 
-There are several features that make it different from most similar systems:
-
-### It is designed to be builder and host agnostic
-
-In theory, binaries for any target OS/architecture can be created, from a
-builder running any OS/architecture. In practice, build-side tools must be
-specified when the defaults don't fit, and packages must be amended to work
-on new hosts. For now, a build architecture of x86_64 is assumed, either on
-Linux or OSX.
-
-### No reliance on timestamps
-
-File presence is used to determine what needs to be built. This makes the
-results distributable and easily digestable by automated builders.
-
-### Each build only has its specified dependencies available at build-time.
-
-For each build, the sysroot is wiped and the (recursive) dependencies are
-installed. This makes each build deterministic, since there will never be any
-unknown files available to cause side-effects.
-
-### Each package is cached and only rebuilt as needed.
-
-Before building, a unique build-id is generated for each package. This id
-consists of a hash of all files used to build the package (Makefiles, packages,
-etc), and as well as a hash of the same data for each recursive dependency. If
-any portion of a package's build recipe changes, it will be rebuilt as well as
-any other package that depends on it. If any of the main makefiles (Makefile, 
-funcs.mk, etc) are changed, all packages will be rebuilt. After building, the
-results are cached into a tarball that can be re-used and distributed.
-
-### Package build results are (relatively) deterministic.
-
-Each package is configured and patched so that it will yield the same
-build-results with each consequent build, within a reasonable set of
-constraints. Some things like timestamp insertion are unavoidable, and are
-beyond the scope of this system. Additionally, the toolchain itself must be
-capable of deterministic results. When revisions are properly bumped, a cached
-build should represent an exact single payload.
-
-### Sources are fetched and verified automatically
-
-Each package must define its source location and checksum. The build will fail
-if the fetched source does not match. Sources may be pre-seeded and/or cached
-as desired.
-
-### Self-cleaning
-
-Build and staging dirs are wiped after use, and any previous version of a
-cached result is removed following a successful build. Automated builders
-should be able to build each revision and store the results with no further
-intervention.

contrib/depends/funcs.mk

@@ -1,262 +0,0 @@
-define int_vars
-#Set defaults for vars which may be overridden per-package
-$(1)_cc=$($($(1)_type)_CC)
-$(1)_cxx=$($($(1)_type)_CXX)
-$(1)_objc=$($($(1)_type)_OBJC)
-$(1)_objcxx=$($($(1)_type)_OBJCXX)
-$(1)_ar=$($($(1)_type)_AR)
-$(1)_ranlib=$($($(1)_type)_RANLIB)
-$(1)_libtool=$($($(1)_type)_LIBTOOL)
-$(1)_nm=$($($(1)_type)_NM)
-$(1)_cflags=$($($(1)_type)_CFLAGS) $($($(1)_type)_$(release_type)_CFLAGS)
-$(1)_cxxflags=$($($(1)_type)_CXXFLAGS) $($($(1)_type)_$(release_type)_CXXFLAGS)
-$(1)_arflags=$($($(1)_type)_ARFLAGS) $($($(1)_type)_$(release_type)_ARFLAGS)
-$(1)_ldflags=$($($(1)_type)_LDFLAGS) $($($(1)_type)_$(release_type)_LDFLAGS) -L$($($(1)_type)_prefix)/lib
-$(1)_cppflags=$($($(1)_type)_CPPFLAGS) $($($(1)_type)_$(release_type)_CPPFLAGS) -I$($($(1)_type)_prefix)/include
-$(1)_recipe_hash:=
-endef
-
-define int_get_all_dependencies
-$(sort $(foreach dep,$(2),$(2) $(call int_get_all_dependencies,$(1),$($(dep)_dependencies))))
-endef
-
-define fetch_file_inner
-    ( mkdir -p $$($(1)_download_dir) && echo Fetching $(3) from $(2) && \
-    $(build_DOWNLOAD) "$$($(1)_download_dir)/$(4).temp" "$(2)/$(3)" && \
-    echo "$(5)  $$($(1)_download_dir)/$(4).temp" > $$($(1)_download_dir)/.$(4).hash && \
-    $(build_SHA256SUM) -c $$($(1)_download_dir)/.$(4).hash && \
-    mv $$($(1)_download_dir)/$(4).temp $$($(1)_source_dir)/$(4) && \
-    rm -rf $$($(1)_download_dir) )
-endef
-
-define fetch_file
-    ( test -f $$($(1)_source_dir)/$(4) || \
-    ( $(call fetch_file_inner,$(1),$(2),$(3),$(4),$(5)) || \
-      $(call fetch_file_inner,$(1),$(FALLBACK_DOWNLOAD_PATH),$(3),$(4),$(5))))
-endef
-
-define int_get_build_recipe_hash
-$(eval $(1)_all_file_checksums:=$(shell $(build_SHA256SUM) $(meta_depends) packages/$(1).mk $(addprefix $(PATCHES_PATH)/$(1)/,$($(1)_patches)) | cut -d" " -f1))
-$(eval $(1)_recipe_hash:=$(shell echo -n "$($(1)_all_file_checksums)" | $(build_SHA256SUM) | cut -d" " -f1))
-endef
-
-define int_get_build_id
-$(eval $(1)_dependencies += $($(1)_$(host_arch)_$(host_os)_dependencies) $($(1)_$(host_os)_dependencies))
-$(eval $(1)_all_dependencies:=$(call int_get_all_dependencies,$(1),$($($(1)_type)_native_toolchain) $($(1)_dependencies)))
-$(foreach dep,$($(1)_all_dependencies),$(eval $(1)_build_id_deps+=$(dep)-$($(dep)_version)-$($(dep)_recipe_hash)))
-$(eval $(1)_build_id_long:=$(1)-$($(1)_version)-$($(1)_recipe_hash)-$(release_type) $($(1)_build_id_deps) $($($(1)_type)_id_string))
-$(eval $(1)_build_id:=$(shell echo -n "$($(1)_build_id_long)" | $(build_SHA256SUM) | cut -c-$(HASH_LENGTH)))
-final_build_id_long+=$($(package)_build_id_long)
-
-#compute package-specific paths
-$(1)_build_subdir?=.
-$(1)_download_file?=$($(1)_file_name)
-$(1)_source_dir:=$(SOURCES_PATH)
-$(1)_source:=$$($(1)_source_dir)/$($(1)_file_name)
-$(1)_staging_dir=$(base_staging_dir)/$(host)/$(1)/$($(1)_version)-$($(1)_build_id)
-$(1)_staging_prefix_dir:=$$($(1)_staging_dir)$($($(1)_type)_prefix)
-$(1)_extract_dir:=$(base_build_dir)/$(host)/$(1)/$($(1)_version)-$($(1)_build_id)
-$(1)_download_dir:=$(base_download_dir)/$(1)-$($(1)_version)
-$(1)_build_dir:=$$($(1)_extract_dir)/$$($(1)_build_subdir)
-$(1)_cached_checksum:=$(BASE_CACHE)/$(host)/$(1)/$(1)-$($(1)_version)-$($(1)_build_id).tar.gz.hash
-$(1)_patch_dir:=$(base_build_dir)/$(host)/$(1)/$($(1)_version)-$($(1)_build_id)/.patches-$($(1)_build_id)
-$(1)_prefixbin:=$($($(1)_type)_prefix)/bin/
-$(1)_cached:=$(BASE_CACHE)/$(host)/$(1)/$(1)-$($(1)_version)-$($(1)_build_id).tar.gz
-$(1)_all_sources=$($(1)_file_name) $($(1)_extra_sources)
-
-#stamps
-$(1)_fetched=$(SOURCES_PATH)/download-stamps/.stamp_fetched-$(1)-$($(1)_file_name).hash
-$(1)_extracted=$$($(1)_extract_dir)/.stamp_extracted
-$(1)_preprocessed=$$($(1)_extract_dir)/.stamp_preprocessed
-$(1)_cleaned=$$($(1)_extract_dir)/.stamp_cleaned
-$(1)_built=$$($(1)_build_dir)/.stamp_built
-$(1)_configured=$$($(1)_build_dir)/.stamp_configured
-$(1)_staged=$$($(1)_staging_dir)/.stamp_staged
-$(1)_postprocessed=$$($(1)_staging_prefix_dir)/.stamp_postprocessed
-$(1)_download_path_fixed=$(subst :,\:,$$($(1)_download_path))
-
-
-#default commands
-$(1)_fetch_cmds ?= $(call fetch_file,$(1),$(subst \:,:,$$($(1)_download_path_fixed)),$$($(1)_download_file),$($(1)_file_name),$($(1)_sha256_hash))
-$(1)_extract_cmds ?= mkdir -p $$($(1)_extract_dir) && echo "$$($(1)_sha256_hash)  $$($(1)_source)" > $$($(1)_extract_dir)/.$$($(1)_file_name).hash &&  $(build_SHA256SUM) -c $$($(1)_extract_dir)/.$$($(1)_file_name).hash && tar --strip-components=1 -xf $$($(1)_source)
-$(1)_preprocess_cmds ?=
-$(1)_build_cmds ?=
-$(1)_config_cmds ?=
-$(1)_stage_cmds ?=
-$(1)_set_vars ?=
-
-
-all_sources+=$$($(1)_fetched)
-endef
-#$(foreach dep_target,$($(1)_all_dependencies),$(eval $(1)_dependency_targets=$($(dep_target)_cached)))
-
-
-define int_config_attach_build_config
-$(eval $(call $(1)_set_vars,$(1)))
-$(1)_cflags+=$($(1)_cflags_$(release_type))
-$(1)_cflags+=$($(1)_cflags_$(host_arch)) $($(1)_cflags_$(host_arch)_$(release_type))
-$(1)_cflags+=$($(1)_cflags_$(host_os)) $($(1)_cflags_$(host_os)_$(release_type))
-$(1)_cflags+=$($(1)_cflags_$(host_arch)_$(host_os)) $($(1)_cflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_cxxflags+=$($(1)_cxxflags_$(release_type))
-$(1)_cxxflags+=$($(1)_cxxflags_$(host_arch)) $($(1)_cxxflags_$(host_arch)_$(release_type))
-$(1)_cxxflags+=$($(1)_cxxflags_$(host_os)) $($(1)_cxxflags_$(host_os)_$(release_type))
-$(1)_cxxflags+=$($(1)_cxxflags_$(host_arch)_$(host_os)) $($(1)_cxxflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_arflags+=$($(1)_arflags_$(release_type))
-$(1)_arflags+=$($(1)_arflags_$(host_arch)) $($(1)_arflags_$(host_arch)_$(release_type))
-$(1)_arflags+=$($(1)_arflags_$(host_os)) $($(1)_arflags_$(host_os)_$(release_type))
-$(1)_arflags+=$($(1)_arflags_$(host_arch)_$(host_os)) $($(1)_arflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_cppflags+=$($(1)_cppflags_$(release_type))
-$(1)_cppflags+=$($(1)_cppflags_$(host_arch)) $($(1)_cppflags_$(host_arch)_$(release_type))
-$(1)_cppflags+=$($(1)_cppflags_$(host_os)) $($(1)_cppflags_$(host_os)_$(release_type))
-$(1)_cppflags+=$($(1)_cppflags_$(host_arch)_$(host_os)) $($(1)_cppflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_ldflags+=$($(1)_ldflags_$(release_type))
-$(1)_ldflags+=$($(1)_ldflags_$(host_arch)) $($(1)_ldflags_$(host_arch)_$(release_type))
-$(1)_ldflags+=$($(1)_ldflags_$(host_os)) $($(1)_ldflags_$(host_os)_$(release_type))
-$(1)_ldflags+=$($(1)_ldflags_$(host_arch)_$(host_os)) $($(1)_ldflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_build_opts+=$$($(1)_build_opts_$(release_type))
-$(1)_build_opts+=$$($(1)_build_opts_$(host_arch)) $$($(1)_build_opts_$(host_arch)_$(release_type))
-$(1)_build_opts+=$$($(1)_build_opts_$(host_os)) $$($(1)_build_opts_$(host_os)_$(release_type))
-$(1)_build_opts+=$$($(1)_build_opts_$(host_arch)_$(host_os)) $$($(1)_build_opts_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_config_opts+=$$($(1)_config_opts_$(release_type))
-$(1)_config_opts+=$$($(1)_config_opts_$(host_arch)) $$($(1)_config_opts_$(host_arch)_$(release_type))
-$(1)_config_opts+=$$($(1)_config_opts_$(host_os)) $$($(1)_config_opts_$(host_os)_$(release_type))
-$(1)_config_opts+=$$($(1)_config_opts_$(host_arch)_$(host_os)) $$($(1)_config_opts_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_config_env+=$$($(1)_config_env_$(release_type))
-$(1)_config_env+=$($(1)_config_env_$(host_arch)) $($(1)_config_env_$(host_arch)_$(release_type))
-$(1)_config_env+=$($(1)_config_env_$(host_os)) $($(1)_config_env_$(host_os)_$(release_type))
-$(1)_config_env+=$($(1)_config_env_$(host_arch)_$(host_os)) $($(1)_config_env_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_config_env+=PKG_CONFIG_LIBDIR=$($($(1)_type)_prefix)/lib/pkgconfig
-$(1)_config_env+=PKG_CONFIG_PATH=$($($(1)_type)_prefix)/share/pkgconfig
-$(1)_config_env+=PATH="$(build_prefix)/bin:$(PATH)"
-$(1)_build_env+=PATH="$(build_prefix)/bin:$(PATH)"
-$(1)_stage_env+=PATH="$(build_prefix)/bin:$(PATH)"
-$(1)_autoconf=./configure --host=$($($(1)_type)_host) --disable-dependency-tracking --prefix=$($($(1)_type)_prefix) $$($(1)_config_opts) CC="$$($(1)_cc)" CXX="$$($(1)_cxx)"
-
-ifneq ($($(1)_nm),)
-$(1)_autoconf += NM="$$($(1)_nm)"
-endif
-ifneq ($($(1)_ranlib),)
-$(1)_autoconf += RANLIB="$$($(1)_ranlib)"
-endif
-ifneq ($($(1)_ar),)
-$(1)_autoconf += AR="$$($(1)_ar)"
-endif
-ifneq ($($(1)_arflags),)
-$(1)_autoconf += ARFLAGS="$$($(1)_arflags)"
-endif
-ifneq ($($(1)_cflags),)
-$(1)_autoconf += CFLAGS="$$($(1)_cflags)"
-endif
-ifneq ($($(1)_cxxflags),)
-$(1)_autoconf += CXXFLAGS="$$($(1)_cxxflags)"
-endif
-ifneq ($($(1)_cppflags),)
-$(1)_autoconf += CPPFLAGS="$$($(1)_cppflags)"
-endif
-ifneq ($($(1)_ldflags),)
-$(1)_autoconf += LDFLAGS="$$($(1)_ldflags)"
-endif
-endef
-
-define int_add_cmds
-$($(1)_fetched):
-	$(AT)mkdir -p $$(@D) $(SOURCES_PATH)
-	$(AT)rm -f $$@
-	$(AT)touch $$@
-	$(AT)cd $$(@D); $(call $(1)_fetch_cmds,$(1))
-	$(AT)cd $($(1)_source_dir); $(foreach source,$($(1)_all_sources),$(build_SHA256SUM) $(source) >> $$(@);)
-	$(AT)touch $$@
-$($(1)_extracted): | $($(1)_fetched)
-	$(AT)echo Extracting $(1)...
-	$(AT)mkdir -p $$(@D)
-	$(AT)cd $$(@D); $(call $(1)_extract_cmds,$(1))
-	$(AT)touch $$@
-$($(1)_preprocessed): | $($(1)_dependencies) $($(1)_extracted)
-	$(AT)echo Preprocessing $(1)...
-	$(AT)mkdir -p $$(@D) $($(1)_patch_dir)
-	$(AT)$(foreach patch,$($(1)_patches),cd $(PATCHES_PATH)/$(1); cp $(patch) $($(1)_patch_dir) ;)
-	$(AT)cd $$(@D); $(call $(1)_preprocess_cmds, $(1))
-	$(AT)touch $$@
-$($(1)_configured): | $($(1)_preprocessed)
-	$(AT)echo Configuring $(1)...
-	$(AT)rm -rf $(host_prefix); mkdir -p $(host_prefix)/lib; cd $(host_prefix); $(foreach package,$($(1)_all_dependencies), tar xf $($(package)_cached); )
-	$(AT)mkdir -p $$(@D)
-	$(AT)+cd $$(@D); $($(1)_config_env) $(call $(1)_config_cmds, $(1))
-	$(AT)touch $$@
-$($(1)_built): | $($(1)_configured)
-	$(AT)echo Building $(1)...
-	$(AT)mkdir -p $$(@D)
-	$(AT)+cd $$(@D); $($(1)_build_env) $(call $(1)_build_cmds, $(1))
-	$(AT)touch $$@
-$($(1)_staged): | $($(1)_built)
-	$(AT)echo Staging $(1)...
-	$(AT)mkdir -p $($(1)_staging_dir)/$(host_prefix)
-	$(AT)cd $($(1)_build_dir); $($(1)_stage_env) $(call $(1)_stage_cmds, $(1))
-	$(AT)rm -rf $($(1)_extract_dir)
-	$(AT)touch $$@
-$($(1)_postprocessed): | $($(1)_staged)
-	$(AT)echo Postprocessing $(1)...
-	$(AT)cd $($(1)_staging_prefix_dir); $(call $(1)_postprocess_cmds)
-	$(AT)touch $$@
-$($(1)_cached): | $($(1)_dependencies) $($(1)_postprocessed)
-	$(AT)echo Caching $(1)...
-	$(AT)cd $$($(1)_staging_dir)/$(host_prefix); find . | sort | tar --no-recursion -czf $$($(1)_staging_dir)/$$(@F) -T -
-	$(AT)mkdir -p $$(@D)
-	$(AT)rm -rf $$(@D) && mkdir -p $$(@D)
-	$(AT)mv $$($(1)_staging_dir)/$$(@F) $$(@)
-	$(AT)rm -rf $($(1)_staging_dir)
-$($(1)_cached_checksum): $($(1)_cached)
-	$(AT)cd $$(@D); $(build_SHA256SUM) $$(<F) > $$(@)
-
-.PHONY: $(1)
-$(1): | $($(1)_cached_checksum)
-.SECONDARY: $($(1)_cached) $($(1)_postprocessed) $($(1)_staged) $($(1)_built) $($(1)_configured) $($(1)_preprocessed) $($(1)_extracted) $($(1)_fetched)
-
-endef
-
-stages = fetched extracted preprocessed configured built staged postprocessed cached cached_checksum
-
-define ext_add_stages
-$(foreach stage,$(stages),
-          $(1)_$(stage): $($(1)_$(stage))
-          .PHONY: $(1)_$(stage))
-endef
-
-# These functions create the build targets for each package. They must be
-# broken down into small steps so that each part is done for all packages
-# before moving on to the next step. Otherwise, a package's info
-# (build-id for example) would only be available to another package if it
-# happened to be computed already.
-
-#set the type for host/build packages.
-$(foreach native_package,$(native_packages),$(eval $(native_package)_type=build))
-$(foreach package,$(packages),$(eval $(package)_type=$(host_arch)_$(host_os)))
-
-#set overridable defaults
-$(foreach package,$(all_packages),$(eval $(call int_vars,$(package))))
-
-#include package files
-$(foreach package,$(all_packages),$(eval include packages/$(package).mk))
-
-#compute a hash of all files that comprise this package's build recipe
-$(foreach package,$(all_packages),$(eval $(call int_get_build_recipe_hash,$(package))))
-
-#generate a unique id for this package, incorporating its dependencies as well
-$(foreach package,$(all_packages),$(eval $(call int_get_build_id,$(package))))
-
-#compute final vars after reading package vars
-$(foreach package,$(all_packages),$(eval $(call int_config_attach_build_config,$(package))))
-
-#create build targets
-$(foreach package,$(all_packages),$(eval $(call int_add_cmds,$(package))))
-
-#special exception: if a toolchain package exists, all non-native packages depend on it
-$(foreach package,$(packages),$(eval $($(package)_unpacked): |$($($(host_arch)_$(host_os)_native_toolchain)_cached) ))

contrib/depends/hosts/android.mk

@@ -1,22 +0,0 @@
-ANDROID_API=21
-
-ifeq ($(host_arch),arm)
-host_toolchain=arm-linux-androideabi-
-endif
-
-android_CC=$(host_toolchain)clang
-android_CXX=$(host_toolchain)clang++
-android_RANLIB=:
-
-android_CFLAGS=-pipe
-android_CXXFLAGS=$(android_CFLAGS)
-android_ARFLAGS=crsD
-
-android_release_CFLAGS=-O2
-android_release_CXXFLAGS=$(android_release_CFLAGS)
-
-android_debug_CFLAGS=-g -O0
-android_debug_CXXFLAGS=$(android_debug_CFLAGS)
-
-android_native_toolchain=android_ndk
-

contrib/depends/hosts/darwin.mk

@@ -1,18 +0,0 @@
-OSX_MIN_VERSION=10.8
-OSX_SDK_VERSION=10.11
-OSX_SDK=$(SDK_PATH)/MacOSX$(OSX_SDK_VERSION).sdk
-LD64_VERSION=253.9
-darwin_CC=clang -target $(host) -mmacosx-version-min=$(OSX_MIN_VERSION) --sysroot $(OSX_SDK) -mlinker-version=$(LD64_VERSION) -B $(host_prefix)/native/bin
-darwin_CXX=clang++ -target $(host) -mmacosx-version-min=$(OSX_MIN_VERSION) --sysroot $(OSX_SDK) -mlinker-version=$(LD64_VERSION) -stdlib=libc++ -B $(host_prefix)/native/bin
-
-darwin_CFLAGS=-pipe
-darwin_CXXFLAGS=$(darwin_CFLAGS)
-darwin_ARFLAGS=cr
-
-darwin_release_CFLAGS=-O1
-darwin_release_CXXFLAGS=$(darwin_release_CFLAGS)
-
-darwin_debug_CFLAGS=-O1
-darwin_debug_CXXFLAGS=$(darwin_debug_CFLAGS)
-
-darwin_native_toolchain=native_cctools

contrib/depends/hosts/default.mk

@@ -1,26 +0,0 @@
-default_host_CC = $(host_toolchain)gcc
-default_host_CXX = $(host_toolchain)g++
-default_host_AR = $(host_toolchain)ar
-default_host_RANLIB = $(host_toolchain)ranlib
-default_host_STRIP = $(host_toolchain)strip
-default_host_LIBTOOL = $(host_toolchain)libtool
-default_host_INSTALL_NAME_TOOL = $(host_toolchain)install_name_tool
-default_host_OTOOL = $(host_toolchain)otool
-default_host_NM = $(host_toolchain)nm
-
-define add_host_tool_func
-$(host_os)_$1?=$$(default_host_$1)
-$(host_arch)_$(host_os)_$1?=$$($(host_os)_$1)
-$(host_arch)_$(host_os)_$(release_type)_$1?=$$($(host_os)_$1)
-host_$1=$$($(host_arch)_$(host_os)_$1)
-endef
-
-define add_host_flags_func
-$(host_arch)_$(host_os)_$1 += $($(host_os)_$1)
-$(host_arch)_$(host_os)_$(release_type)_$1 += $($(host_os)_$(release_type)_$1)
-host_$1 = $$($(host_arch)_$(host_os)_$1)
-host_$(release_type)_$1 = $$($(host_arch)_$(host_os)_$(release_type)_$1)
-endef
-
-$(foreach tool,CC CXX AR RANLIB STRIP NM LIBTOOL OTOOL INSTALL_NAME_TOOL,$(eval $(call add_host_tool_func,$(tool))))
-$(foreach flags,CFLAGS CXXFLAGS ARFLAGS CPPFLAGS LDFLAGS, $(eval $(call add_host_flags_func,$(flags))))

contrib/depends/hosts/freebsd.mk

@@ -1,18 +0,0 @@
-freebsd_CC=clang-8
-freebsd_CXX=clang++-8
-freebsd_AR=ar
-freebsd_RANLIB=ranlib
-freebsd_NM=nm
-
-freebsd_CFLAGS=-pipe
-freebsd_CXXFLAGS=$(freebsd_CFLAGS)
-freebsd_ARFLAGS=cr
-
-freebsd_release_CFLAGS=-O2
-freebsd_release_CXXFLAGS=$(freebsd_release_CFLAGS)
-
-freebsd_debug_CFLAGS=-g -O0
-freebsd_debug_CXXFLAGS=$(freebsd_debug_CFLAGS)
-
-freebsd_native_toolchain=freebsd_base
-

contrib/depends/hosts/linux.mk

@@ -1,32 +0,0 @@
-linux_CFLAGS=-pipe
-linux_CXXFLAGS=$(linux_CFLAGS)
-linux_ARFLAGS=cr
-
-linux_release_CFLAGS=-O2
-linux_release_CXXFLAGS=$(linux_release_CFLAGS)
-
-linux_debug_CFLAGS=-O1
-linux_debug_CXXFLAGS=$(linux_debug_CFLAGS)
-
-linux_debug_CPPFLAGS=-D_GLIBCXX_DEBUG -D_GLIBCXX_DEBUG_PEDANTIC
-
-ifeq (86,$(findstring 86,$(build_arch)))
-i686_linux_CC=gcc -m32
-i686_linux_CXX=g++ -m32
-i686_linux_AR=ar
-i686_linux_RANLIB=ranlib
-i686_linux_NM=nm
-i686_linux_STRIP=strip
-
-x86_64_linux_CC=gcc -m64
-x86_64_linux_CXX=g++ -m64
-x86_64_linux_AR=ar
-x86_64_linux_RANLIB=ranlib
-x86_64_linux_NM=nm
-x86_64_linux_STRIP=strip
-else
-i686_linux_CC=$(default_host_CC) -m32
-i686_linux_CXX=$(default_host_CXX) -m32
-x86_64_linux_CC=$(default_host_CC) -m64
-x86_64_linux_CXX=$(default_host_CXX) -m64
-endif

contrib/depends/hosts/mingw32.mk

@@ -1,11 +0,0 @@
-mingw32_CFLAGS=-pipe
-mingw32_CXXFLAGS=$(mingw32_CFLAGS)
-mingw32_ARFLAGS=cr
-
-mingw32_release_CFLAGS=-O2
-mingw32_release_CXXFLAGS=$(mingw32_release_CFLAGS)
-
-mingw32_debug_CFLAGS=-O1
-mingw32_debug_CXXFLAGS=$(mingw32_debug_CFLAGS)
-
-mingw32_debug_CPPFLAGS=-D_GLIBCXX_DEBUG -D_GLIBCXX_DEBUG_PEDANTIC

contrib/depends/packages.md

@@ -1,165 +0,0 @@
-Each recipe consists of 3 main parts: defining identifiers, setting build
-variables, and defining build commands.
-
-The package "mylib" will be used here as an example
-
-General tips:
-- mylib_foo is written as $(package)_foo in order to make recipes more similar.
-
-## Identifiers
-Each package is required to define at least these variables:
-
-```
-$(package)_version:
-Version of the upstream library or program. If there is no version, a
-placeholder such as 1.0 can be used.
-
-$(package)_download_path:
-Location of the upstream source, without the file-name. Usually http or
-ftp.
-
-$(package)_file_name:
-The upstream source filename available at the download path.
-
-$(package)_sha256_hash:
-The sha256 hash of the upstream file
-```
-
-These variables are optional:
-
-```
-$(package)_build_subdir:
-cd to this dir before running configure/build/stage commands.
-
-$(package)_download_file:
-The file-name of the upstream source if it differs from how it should be
-stored locally. This can be used to avoid storing file-names with strange
-characters.
-
-$(package)_dependencies:
-Names of any other packages that this one depends on.
-
-$(package)_patches:
-Filenames of any patches needed to build the package
-
-$(package)_extra_sources:
-Any extra files that will be fetched via $(package)_fetch_cmds. These are
-specified so that they can be fetched and verified via 'make download'.
-```
-
-
-## Build Variables:
-After defining the main identifiers, build variables may be added or customized
-before running the build commands. They should be added to a function called
-$(package)_set_vars. For example:
-
-```
-define $(package)_set_vars
-...
-endef
-```
-
-Most variables can be prefixed with the host, architecture, or both, to make
-the modifications specific to that case. For example:
-
-```
-Universal:     $(package)_cc=gcc
-Linux only:    $(package)_linux_cc=gcc
-x86_64 only:       $(package)_x86_64_cc = gcc
-x86_64 linux only: $(package)_x86_64_linux_cc = gcc
-```
-
-These variables may be set to override or append their default values.
-
-```
-$(package)_cc
-$(package)_cxx
-$(package)_objc
-$(package)_objcxx
-$(package)_ar
-$(package)_ranlib
-$(package)_libtool
-$(package)_nm
-$(package)_cflags
-$(package)_cxxflags
-$(package)_ldflags
-$(package)_cppflags
-$(package)_config_env
-$(package)_build_env
-$(package)_stage_env
-$(package)_build_opts
-$(package)_config_opts
-```
-
-The `*_env` variables are used to add environment variables to the respective
-commands.
-
-Many variables respect a debug/release suffix as well, in order to use them for
-only the appropriate build config. For example:
-
-```
-$(package)_cflags_release = -O3
-$(package)_cflags_i686_debug = -g
-$(package)_config_opts_release = --disable-debug
-```
-
-These will be used in addition to the options that do not specify
-debug/release. All builds are considered to be release unless DEBUG=1 is set by
-the user. Other variables may be defined as needed.
-
-## Build commands:
-
-For each build, a unique build dir and staging dir are created. For example,
-`work/build/mylib/1.0-1adac830f6e` and `work/staging/mylib/1.0-1adac830f6e`.
-
-The following build commands are available for each recipe:
-
-```
-$(package)_fetch_cmds:
-Runs from: build dir
-Fetch the source file. If undefined, it will be fetched and verified
-against its hash.
-
-$(package)_extract_cmds:
-Runs from: build dir
-Verify the source file against its hash and extract it. If undefined, the
-source is assumed to be a tarball.
-
-$(package)_preprocess_cmds:
-Runs from: build dir/$(package)_build_subdir
-Preprocess the source as necessary. If undefined, does nothing.
-
-$(package)_config_cmds:
-Runs from: build dir/$(package)_build_subdir
-Configure the source. If undefined, does nothing.
-
-$(package)_build_cmds:
-Runs from: build dir/$(package)_build_subdir
-Build the source. If undefined, does nothing.
-
-$(package)_stage_cmds:
-Runs from: build dir/$(package)_build_subdir
-Stage the build results. If undefined, does nothing.
-```
-
-The following variables are available for each recipe:
-
-```    
-$(1)_staging_dir: package's destination sysroot path
-$(1)_staging_prefix_dir: prefix path inside of the package's staging dir
-$(1)_extract_dir: path to the package's extracted sources
-$(1)_build_dir: path where configure/build/stage commands will be run
-$(1)_patch_dir: path where the package's patches (if any) are found
-```
-
-Notes on build commands:
-
-For packages built with autotools, `$($(package)_autoconf)` can be used in the
-configure step to (usually) correctly configure automatically. Any
-`$($(package)_config_opts`) will be appended.
-
-Most autotools projects can be properly staged using:
-
-```bash
-$(MAKE) DESTDIR=$($(package)_staging_dir) install
-```

contrib/depends/packages/android_ndk.mk

@@ -1,22 +0,0 @@
-package=android_ndk
-$(package)_version=17b
-$(package)_download_path=https://dl.google.com/android/repository/
-$(package)_file_name=android-ndk-r$($(package)_version)-linux-x86_64.zip
-$(package)_sha256_hash=5dfbbdc2d3ba859fed90d0e978af87c71a91a5be1f6e1c40ba697503d48ccecd
-
-define $(package)_set_vars
-$(package)_config_opts_arm=--arch arm
-$(package)_config_opts_aarch64=--arch arm64
-endef
-
-define $(package)_extract_cmds
-  echo $($(package)_sha256_hash) $($(1)_source_dir)/$($(package)_file_name) | sha256sum -c &&\
-  unzip -q $($(1)_source_dir)/$($(package)_file_name)
-endef
-
-define $(package)_stage_cmds
-  android-ndk-r$($(package)_version)/build/tools/make_standalone_toolchain.py --api 21 \
-    --install-dir $(build_prefix) --stl=libc++ $($(package)_config_opts) &&\
-  mv $(build_prefix) $($(package)_staging_dir)/$(host_prefix)
-endef
-

contrib/depends/packages/boost.mk

@@ -1,46 +0,0 @@
-package=boost                                                                                                                                                                                                                      
-$(package)_version=1_64_0
-$(package)_download_path=https://dl.bintray.com/boostorg/release/1.64.0/source/
-$(package)_file_name=$(package)_$($(package)_version).tar.bz2
-$(package)_sha256_hash=7bcc5caace97baa948931d712ea5f37038dbb1c5d89b43ad4def4ed7cb683332
-$(package)_dependencies=libiconv
-$(package)_patches=fix_aroptions.patch
-
-define $(package)_set_vars
-$(package)_config_opts_release=variant=release
-$(package)_config_opts_debug=variant=debug
-$(package)_config_opts=--layout=tagged --build-type=complete --user-config=user-config.jam
-$(package)_config_opts+=threading=multi link=static -sNO_BZIP2=1 -sNO_ZLIB=1
-$(package)_config_opts_linux=threadapi=pthread runtime-link=shared
-$(package)_config_opts_android=threadapi=pthread runtime-link=static target-os=android
-$(package)_config_opts_darwin=--toolset=darwin-4.2.1 runtime-link=shared
-$(package)_config_opts_mingw32=binary-format=pe target-os=windows threadapi=win32 runtime-link=static
-$(package)_config_opts_x86_64_mingw32=address-model=64
-$(package)_config_opts_i686_mingw32=address-model=32
-$(package)_config_opts_i686_linux=address-model=32 architecture=x86
-$(package)_toolset_$(host_os)=gcc
-$(package)_archiver_$(host_os)=$($(package)_ar)
-$(package)_toolset_darwin=darwin
-$(package)_archiver_darwin=$($(package)_libtool)
-$(package)_config_libraries=chrono,filesystem,program_options,system,thread,test,date_time,regex,serialization,locale
-$(package)_cxxflags=-std=c++11
-$(package)_cxxflags_linux=-fPIC
-$(package)_cxxflags_freebsd=-fPIC
-endef
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/fix_aroptions.patch &&\
-  echo "using $(boost_toolset_$(host_os)) : : $($(package)_cxx) : <cxxflags>\"$($(package)_cxxflags) $($(package)_cppflags)\" <linkflags>\"$($(package)_ldflags)\" <archiver>\"$(boost_archiver_$(host_os))\" <arflags>\"$($(package)_arflags)\" <striper>\"$(host_STRIP)\"  <ranlib>\"$(host_RANLIB)\" <rc>\"$(host_WINDRES)\" : ;" > user-config.jam
-endef
-
-define $(package)_config_cmds
-  ./bootstrap.sh --without-icu --with-libraries=$(boost_config_libraries)
-endef
-
-define $(package)_build_cmds
-  ./b2 -d2 -j2 -d1 --prefix=$($(package)_staging_prefix_dir) $($(package)_config_opts) stage
-endef
-
-define $(package)_stage_cmds
-  ./b2 -d0 -j4 --prefix=$($(package)_staging_prefix_dir) $($(package)_config_opts) install
-endef

contrib/depends/packages/eudev.mk

@@ -1,29 +0,0 @@
-package=eudev
-$(package)_version=v3.2.6
-$(package)_download_path=https://github.com/gentoo/eudev/archive/
-$(package)_file_name=$($(package)_version).tar.gz
-$(package)_sha256_hash=a96ecb8637667897b8bd4dee4c22c7c5f08b327be45186e912ce6bc768385852
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-gudev --disable-introspection --disable-hwdb --disable-manpages --disable-shared
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmd
-  $(MAKE)
-endef
-
-define $(package)_preprocess_cmds
-  cd $($(package)_build_subdir); autoreconf -f -i
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef

contrib/depends/packages/expat.mk

@@ -1,28 +0,0 @@
-package=expat
-$(package)_version=2.2.4
-$(package)_download_path=https://github.com/libexpat/libexpat/releases/download/R_2_2_4
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=03ad85db965f8ab2d27328abcf0bc5571af6ec0a414874b2066ee3fdd372019e
-
-define $(package)_set_vars
-$(package)_config_opts=--enable-static
-$(package)_config_opts=--disable-shared
-$(package)_config_opts+=--prefix=$(host_prefix)
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) $($(package)_config_opts)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/freebsd_base.mk

@@ -1,23 +0,0 @@
-package=freebsd_base
-$(package)_version=11.3
-$(package)_download_path=https://download.freebsd.org/ftp/releases/amd64/$($(package)_version)-RELEASE/
-$(package)_download_file=base.txz
-$(package)_file_name=freebsd-base-$($(package)_version).txz
-$(package)_sha256_hash=4599023ac136325b86f2fddeec64c1624daa83657e40b00b2ef944c81463a4ff
-
-define $(package)_extract_cmds
-  echo $($(package)_sha256_hash) $($(1)_source_dir)/$($(package)_file_name) | sha256sum -c &&\
-  tar xf $($(1)_source_dir)/$($(package)_file_name) ./lib/ ./usr/lib/ ./usr/include/
-endef
-
-define $(package)_build_cmds
-  mkdir bin &&\
-  echo "exec /usr/bin/clang-8 -target x86_64-unknown-freebsd$($(package)_version) --sysroot=$(host_prefix)/native $$$$""@" > bin/clang-8 &&\
-  echo "exec /usr/bin/clang++-8 -target x86_64-unknown-freebsd$($(package)_version) --sysroot=$(host_prefix)/native $$$$""@" > bin/clang++-8 &&\
-  chmod 755 bin/*
-endef
-
-define $(package)_stage_cmds
-  mkdir $($(package)_staging_dir)/$(host_prefix)/native &&\
-  mv bin lib usr $($(package)_staging_dir)/$(host_prefix)/native
-endef

contrib/depends/packages/graphviz.mk

@@ -1,30 +0,0 @@
-package=graphviz
-$(package)_version=2.40.1
-$(package)_download_path=www.graphviz.org/pub/graphviz/stable/SOURCES/
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=ca5218fade0204d59947126c38439f432853543b0818d9d728c589dfe7f3a421
-
-define $(package)_preprocess_cmds
-  ./autogen.sh
-endef
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --enable-multibye --without-purify --without-curses
-  $(package)_config_opts_release=--disable-debug-mode
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-endef

contrib/depends/packages/gtest.mk

@@ -1,38 +0,0 @@
-package=gtest
-$(package)_version=1.8.1
-$(package)_download_path=https://github.com/google/googletest/archive/
-$(package)_file_name=release-$($(package)_version).tar.gz
-$(package)_sha256_hash=9bf1fe5182a604b4135edc1a425ae356c9ad15e9b23f9f12a02e80184c3a249c
-$(package)_cxxflags=-std=c++11
-$(package)_cxxflags_linux=-fPIC
-
-define $(package)_config_cmds
-  cd googletest && \
-    CC="$(host_prefix)/native/bin/$($(package)_cc)" \
-    CXX="$(host_prefix)/native/bin/$($(package)_cxx)" \
-    AR="$(host_prefix)/native/bin/$($(package)_ar)" \
-    RANLIB="$(host_prefix)/native/bin/$($(package)_ranlib)" \
-    LIBTOOL="$(host_prefix)/native/bin/$($(package)_libtool)" \
-    CXXFLAGS="$($(package)_cxxflags)" \
-    CCFLAGS="$($(package)_ccflags)" \
-    CPPFLAGS="$($(package)_cppflags)" \
-    CFLAGS="$($(package)_cflags) $($(package)_cppflags)" \
-    LDLAGS="$($(package)_ldflags)" \
-  cmake -DCMAKE_INSTALL_PREFIX=$(build_prefix) \
-    -DTOOLCHAIN_PREFIX=$(host_toolchain) \
-    -DCMAKE_AR="$(host_prefix)/native/bin/$($(package)_ar)" \
-    -DCMAKE_RANLIB="$(host_prefix)/native/bin/$($(package)_ranlib)" \
-    -DCMAKE_CXX_FLAGS_DEBUG=ON
-endef
-# -DCMAKE_TOOLCHAIN_FILE=$(HOST)/share/toolchain.cmake
-
-define $(package)_build_cmds
-  cd googletest && CC="$(host_prefix)/native/bin/$($(package)_cc)" $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  mkdir $($(package)_staging_prefix_dir)/lib $($(package)_staging_prefix_dir)/include &&\
-  cp googletest/libgtest.a $($(package)_staging_prefix_dir)/lib/ &&\
-  cp googletest/libgtest_main.a $($(package)_staging_prefix_dir)/lib/ &&\
-  cp -a googletest/include/* $($(package)_staging_prefix_dir)/include/
-endef

contrib/depends/packages/hidapi.mk

@@ -1,35 +0,0 @@
-package=hidapi
-$(package)_version=0.9.0
-$(package)_download_path=https://github.com/libusb/hidapi/archive
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=630ee1834bdd5c5761ab079fd04f463a89585df8fcae51a7bfe4229b1e02a652
-$(package)_linux_dependencies=libusb eudev
-
-define $(package)_set_vars
-$(package)_config_opts=--enable-static --disable-shared
-$(package)_config_opts+=--prefix=$(host_prefix)
-$(package)_config_opts_darwin+=RANLIB="$(host_prefix)/native/bin/x86_64-apple-darwin11-ranlib" AR="$(host_prefix)/native/bin/x86_64-apple-darwin11-ar" CC="$(host_prefix)/native/bin/$($(package)_cc)"
-$(package)_config_opts_linux+=libudev_LIBS="-L$(host_prefix)/lib -ludev"
-$(package)_config_opts_linux+=libudev_CFLAGS=-I$(host_prefix)/include
-$(package)_config_opts_linux+=libusb_LIBS="-L$(host_prefix)/lib -lusb-1.0"
-$(package)_config_opts_linux+=libusb_CFLAGS=-I$(host_prefix)/include/libusb-1.0
-$(package)_config_opts_linux+=--with-pic
-endef
-
-define $(package)_config_cmds
-  ./bootstrap &&\
-  $($(package)_autoconf) $($(package)_config_opts) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/icu4c.mk

@@ -1,27 +0,0 @@
-package=icu4c
-$(package)_version=55.2
-$(package)_download_path=https://github.com/unicode-org/icu/releases/download/release-55-2/
-$(package)_file_name=$(package)-55_2-src.tgz
-$(package)_sha256_hash=eda2aa9f9c787748a2e2d310590720ca8bcc6252adf6b4cfb03b65bef9d66759
-$(package)_patches=icu-001-dont-build-static-dynamic-twice.patch
-
-define $(package)_set_vars
-  $(package)_build_opts=CFLAGS="$($(package)_cflags) $($(package)_cppflags) -DU_USING_ICU_NAMESPACE=0 -DU_STATIC_IMPLEMENTATION -DU_COMBINED_IMPLEMENTATION -fPIC -DENABLE_STATIC=YES -DPGKDATA_MODE=static"
-endef
-
-define $(package)_config_cmds
-  patch -p1 < $($(package)_patch_dir)/icu-001-dont-build-static-dynamic-twice.patch &&\
-  mkdir builda &&\
-  mkdir buildb &&\
-  cd builda &&\
-  sh ../source/runConfigureICU Linux &&\
-  make &&\
-  cd ../buildb &&\
-  sh ../source/runConfigureICU MinGW --enable-static=yes --disable-shared --disable-layout --disable-layoutex --disable-tests --disable-samples --prefix=$(host_prefix) --with-cross-build=`pwd`/../builda &&\
-  $(MAKE) $($(package)_build_opts)
-endef
-
-define $(package)_stage_cmds
-  cd buildb &&\
-  $(MAKE) $($(package)_build_opts) DESTDIR=$($(package)_staging_dir) install lib/*
-endef

contrib/depends/packages/ldns.mk

@@ -1,34 +0,0 @@
-package=ldns
-$(package)_version=1.6.17
-$(package)_download_path=https://www.nlnetlabs.nl/downloads/ldns/
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=8b88e059452118e8949a2752a55ce59bc71fa5bc414103e17f5b6b06f9bcc8cd
-$(package)_dependencies=openssl
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --enable-static --with-drill
-  $(package)_config_opts+=--with-ssl=$(host_prefix)
-  $(package)_config_opts_release=--disable-debug-mode
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_preprocess_cmds
-   cp -f $(BASEDIR)/config.guess $(BASEDIR)/config.sub .
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install-h install-lib
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/libICE.mk

@@ -1,23 +0,0 @@
-package=libICE
-$(package)_version=1.0.9
-$(package)_download_path=https://xorg.freedesktop.org/releases/individual/lib/
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=8f7032f2c1c64352b5423f6b48a8ebdc339cc63064af34d66a6c9aa79759e202
-$(package)_dependencies=xtrans xproto
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-static --disable-docs --disable-specs --without-xsltproc
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef

contrib/depends/packages/libSM.mk

@@ -1,23 +0,0 @@
-package=libSM
-$(package)_version=1.2.2
-$(package)_download_path=https://xorg.freedesktop.org/releases/individual/lib/
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=0baca8c9f5d934450a70896c4ad38d06475521255ca63b717a6510fdb6e287bd
-$(package)_dependencies=xtrans xproto libICE
-
-define $(package)_set_vars
-  $(package)_config_opts=--without-libuuid  --without-xsltproc  --disable-docs --disable-static
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef

contrib/depends/packages/libiconv.mk

@@ -1,35 +0,0 @@
-package=libiconv
-$(package)_version=1.15
-$(package)_download_path=https://ftp.gnu.org/gnu/libiconv
-$(package)_file_name=libiconv-$($(package)_version).tar.gz
-$(package)_sha256_hash=ccf536620a45458d26ba83887a983b96827001e92a13847b45e4925cc8913178
-$(package)_patches=fix-whitespace.patch
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-nls
-  $(package)_config_opts=--enable-static
-  $(package)_config_opts=--disable-shared
-  $(package)_config_opts_linux=--with-pic
-  $(package)_config_opts_freebsd=--with-pic
-endef
-
-define $(package)_preprocess_cmds
-  cp -f $(BASEDIR)/config.guess $(BASEDIR)/config.sub build-aux/ &&\
-  patch -p1 < $($(package)_patch_dir)/fix-whitespace.patch
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef

contrib/depends/packages/libusb.mk

@@ -1,39 +0,0 @@
-package=libusb
-$(package)_version=1.0.22
-$(package)_download_path=https://sourceforge.net/projects/libusb/files/libusb-1.0/libusb-$($(package)_version)/
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=75aeb9d59a4fdb800d329a545c2e6799f732362193b465ea198f2aa275518157
-
-define $(package)_preprocess_cmds
-  autoreconf -i
-endef
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared
-  $(package)_config_opts_linux=--with-pic --disable-udev
-  $(package)_config_opts_mingw32=--disable-udev
-  $(package)_config_opts_darwin=--disable-udev
-endef
-
-ifneq ($(host_os),darwin)
-  define $(package)_config_cmds
-    cp -f $(BASEDIR)/config.guess config.guess &&\
-    cp -f $(BASEDIR)/config.sub config.sub &&\
-    $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-  endef
-else
-  define $(package)_config_cmds
-    $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-  endef
-endif
-
-define $(package)_build_cmd
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds  cp -f lib/libusb-1.0.a lib/libusb.a
-endef

contrib/depends/packages/native_biplist.mk

@@ -1,20 +0,0 @@
-package=native_biplist
-$(package)_version=0.9
-$(package)_download_path=https://pypi.python.org/packages/source/b/biplist
-$(package)_file_name=biplist-$($(package)_version).tar.gz
-$(package)_sha256_hash=b57cadfd26e4754efdf89e9e37de87885f9b5c847b2615688ca04adfaf6ca604
-$(package)_install_libdir=$(build_prefix)/lib/python/dist-packages
-$(package)_patches=sorted_list.patch
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/sorted_list.patch
-endef
-
-define $(package)_build_cmds
-    python setup.py build
-endef
-
-define $(package)_stage_cmds
-    mkdir -p $($(package)_install_libdir) && \
-    python setup.py install --root=$($(package)_staging_dir) --prefix=$(build_prefix) --install-lib=$($(package)_install_libdir)
-endef

contrib/depends/packages/native_ccache.mk

@@ -1,25 +0,0 @@
-package=native_ccache
-$(package)_version=3.3.4
-$(package)_download_path=https://samba.org/ftp/ccache
-$(package)_file_name=ccache-$($(package)_version).tar.bz2
-$(package)_sha256_hash=fa9d7f38367431bc86b19ad107d709ca7ecf1574fdacca01698bdf0a47cd8567
-
-define $(package)_set_vars
-$(package)_config_opts=
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm -rf lib include
-endef

contrib/depends/packages/native_cctools.mk

@@ -1,70 +0,0 @@
-package=native_cctools
-$(package)_version=807d6fd1be5d2224872e381870c0a75387fe05e6
-$(package)_download_path=https://github.com/theuni/cctools-port/archive
-$(package)_file_name=$($(package)_version).tar.gz
-$(package)_sha256_hash=a09c9ba4684670a0375e42d9d67e7f12c1f62581a27f28f7c825d6d7032ccc6a
-$(package)_build_subdir=cctools
-$(package)_clang_version=3.7.1
-$(package)_clang_download_path=http://llvm.org/releases/$($(package)_clang_version)
-$(package)_clang_download_file=clang+llvm-$($(package)_clang_version)-x86_64-linux-gnu-ubuntu-14.04.tar.xz
-$(package)_clang_file_name=clang-llvm-$($(package)_clang_version)-x86_64-linux-gnu-ubuntu-14.04.tar.xz
-$(package)_clang_sha256_hash=99b28a6b48e793705228a390471991386daa33a9717cd9ca007fcdde69608fd9
-$(package)_extra_sources=$($(package)_clang_file_name)
-$(package)_patches=skip_otool.patch
-
-define $(package)_fetch_cmds
-$(call fetch_file,$(package),$($(package)_download_path),$($(package)_download_file),$($(package)_file_name),$($(package)_sha256_hash)) && \
-$(call fetch_file,$(package),$($(package)_clang_download_path),$($(package)_clang_download_file),$($(package)_clang_file_name),$($(package)_clang_sha256_hash))
-endef
-
-define $(package)_extract_cmds
-  mkdir -p $($(package)_extract_dir) && \
-  echo "$($(package)_sha256_hash)  $($(package)_source)" > $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  echo "$($(package)_clang_sha256_hash)  $($(package)_source_dir)/$($(package)_clang_file_name)" >> $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  $(build_SHA256SUM) -c $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  mkdir -p toolchain/bin toolchain/lib/clang/3.5/include && \
-  tar --strip-components=1 -C toolchain -xf $($(package)_source_dir)/$($(package)_clang_file_name) && \
-  rm -f toolchain/lib/libc++abi.so* && \
-  echo "#!/bin/sh" > toolchain/bin/$(host)-dsymutil && \
-  echo "exit 0" >> toolchain/bin/$(host)-dsymutil && \
-  chmod +x toolchain/bin/$(host)-dsymutil && \
-  tar --strip-components=1 -xf $($(package)_source)
-endef
-
-define $(package)_set_vars
-$(package)_config_opts=--target=$(host) --disable-lto-support
-$(package)_ldflags+=-Wl,-rpath=\\$$$$$$$$\$$$$$$$$ORIGIN/../lib
-$(package)_cc=$($(package)_extract_dir)/toolchain/bin/clang
-$(package)_cxx=$($(package)_extract_dir)/toolchain/bin/clang++
-endef
-
-# If clang gets updated to a version with a fix for https://reviews.llvm.org/D50559
-# then the patch that skips otool can be removed.
-define $(package)_preprocess_cmds
-  patch -p0 < $($(package)_patch_dir)/skip_otool.patch && \
-  cd $($(package)_build_subdir); ./autogen.sh && \
-  sed -i.old "/define HAVE_PTHREADS/d" ld64/src/ld/InputFiles.h
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install && \
-  cp $($(package)_extract_dir)/cctools/misc/install_name_tool $($(package)_staging_prefix_dir)/bin/ &&\
-  cd $($(package)_extract_dir)/toolchain && \
-  mkdir -p $($(package)_staging_prefix_dir)/lib/clang/$($(package)_clang_version)/include && \
-  mkdir -p $($(package)_staging_prefix_dir)/bin $($(package)_staging_prefix_dir)/include && \
-  cp bin/clang $($(package)_staging_prefix_dir)/bin/ &&\
-  cp -P bin/clang++ $($(package)_staging_prefix_dir)/bin/ &&\
-  cp lib/libLTO.so $($(package)_staging_prefix_dir)/lib/ && \
-  cp -rf lib/clang/$($(package)_clang_version)/include/* $($(package)_staging_prefix_dir)/lib/clang/$($(package)_clang_version)/include/ && \
-  cp bin/llvm-dsymutil $($(package)_staging_prefix_dir)/bin/$(host)-dsymutil && \
-  if `test -d include/c++/`; then cp -rf include/c++/ $($(package)_staging_prefix_dir)/include/; fi && \
-  if `test -d lib/c++/`; then cp -rf lib/c++/ $($(package)_staging_prefix_dir)/lib/; fi
-endef

contrib/depends/packages/native_cdrkit.mk

@@ -1,26 +0,0 @@
-package=native_cdrkit
-$(package)_version=1.1.11
-$(package)_download_path=https://distro.ibiblio.org/fatdog/source/600/c
-$(package)_file_name=cdrkit-$($(package)_version).tar.bz2
-$(package)_sha256_hash=b50d64c214a65b1a79afe3a964c691931a4233e2ba605d793eb85d0ac3652564
-$(package)_patches=cdrkit-deterministic.patch
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/cdrkit-deterministic.patch
-endef
-
-define $(package)_config_cmds
-  cmake -DCMAKE_INSTALL_PREFIX=$(build_prefix)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) genisoimage
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) -C genisoimage install
-endef
-
-define $(package)_postprocess_cmds
-  rm bin/isovfy bin/isoinfo bin/isodump bin/isodebug bin/devdump
-endef

contrib/depends/packages/native_cmake-unused.mk

@@ -1,23 +0,0 @@
-package=native_cmake
-$(package)_version=3.14.0
-$(package)_version_dot=v3.14
-$(package)_download_path=https://cmake.org/files/$($(package)_version_dot)/
-$(package)_file_name=cmake-$($(package)_version).tar.gz
-$(package)_sha256_hash=aa76ba67b3c2af1946701f847073f4652af5cbd9f141f221c97af99127e75502
-
-define $(package)_set_vars
-$(package)_config_opts=
-endef
-
-define $(package)_config_cmds
-  ./bootstrap &&\
-  ./configure $($(package)_config_opts)
-endef
-
-define $(package)_build_cmd
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef

contrib/depends/packages/native_ds_store.mk

@@ -1,17 +0,0 @@
-package=native_ds_store
-$(package)_version=1.1.0
-$(package)_download_path=https://github.com/al45tair/ds_store/archive/
-$(package)_download_file=v$($(package)_version).tar.gz
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=a9f4c0755c6be7224ff7029e188dd262e830bb81e801424841db9eb0780ec8ed
-$(package)_install_libdir=$(build_prefix)/lib/python/dist-packages
-$(package)_dependencies=native_biplist
-
-define $(package)_build_cmds
-    python setup.py build
-endef
-
-define $(package)_stage_cmds
-    mkdir -p $($(package)_install_libdir) && \
-    python setup.py install --root=$($(package)_staging_dir) --prefix=$(build_prefix) --install-lib=$($(package)_install_libdir)
-endef

contrib/depends/packages/native_libdmg-hfsplus.mk

@@ -1,22 +0,0 @@
-package=native_libdmg-hfsplus
-$(package)_version=0.1
-$(package)_download_path=https://github.com/theuni/libdmg-hfsplus/archive
-$(package)_file_name=libdmg-hfsplus-v$($(package)_version).tar.gz
-$(package)_sha256_hash=6569a02eb31c2827080d7d59001869ea14484c281efab0ae7f2b86af5c3120b3
-$(package)_build_subdir=build
-
-define $(package)_preprocess_cmds
-  mkdir build
-endef
-
-define $(package)_config_cmds
-  cmake -DCMAKE_INSTALL_PREFIX:PATH=$(build_prefix)/bin ..
-endef
-
-define $(package)_build_cmds
-  $(MAKE) -C dmg
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) -C dmg install
-endef

contrib/depends/packages/native_mac_alias.mk

@@ -1,21 +0,0 @@
-package=native_mac_alias
-$(package)_version=1.1.0
-$(package)_download_path=https://github.com/al45tair/mac_alias/archive/
-$(package)_download_file=v$($(package)_version).tar.gz
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=b10cb44ecb64fc25283fae7a9cf365d2829377d84e37b9c21100aca8757509be
-$(package)_install_libdir=$(build_prefix)/lib/python/dist-packages
-$(package)_patches=python3.patch
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/python3.patch
-endef
-
-define $(package)_build_cmds
-    python setup.py build
-endef
-
-define $(package)_stage_cmds
-    mkdir -p $($(package)_install_libdir) && \
-    python setup.py install --root=$($(package)_staging_dir) --prefix=$(build_prefix) --install-lib=$($(package)_install_libdir)
-endef

contrib/depends/packages/native_protobuf.mk

@@ -1,27 +0,0 @@
-package=protobuf3
-$(package)_version=3.6.1
-$(package)_download_path=https://github.com/protocolbuffers/protobuf/releases/download/v$($(package)_version)/
-$(package)_file_name=protobuf-cpp-$($(package)_version).tar.gz
-$(package)_sha256_hash=b3732e471a9bb7950f090fd0457ebd2536a9ba0891b7f3785919c654fe2a2529
-$(package)_cxxflags=-std=c++11
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --prefix=$(build_prefix)
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) -C src
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) -C src install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/libprotoc.a
-endef

contrib/depends/packages/ncurses.mk

@@ -1,64 +0,0 @@
-package=ncurses
-$(package)_version=6.1
-$(package)_download_path=https://ftp.gnu.org/gnu/ncurses
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=aa057eeeb4a14d470101eff4597d5833dcef5965331be3528c08d99cebaa0d17
-$(package)_patches=fallback.c
-
-define $(package)_set_vars
-  $(package)_build_opts=CC="$($(package)_cc)"
-  $(package)_config_env=AR="$($(package)_ar)" RANLIB="$($(package)_ranlib)" CC="$($(package)_cc)" ARFLAGS=$($(package)_arflags) cf_cv_ar_flags=""
-  $(package)_config_env_darwin=RANLIB="$(host_prefix)/native/bin/x86_64-apple-darwin11-ranlib" AR="$(host_prefix)/native/bin/x86_64-apple-darwin11-ar" CC="$(host_prefix)/native/bin/$($(package)_cc)"
-  $(package)_config_opts=--prefix=$(host_prefix)
-  $(package)_config_opts+=--disable-shared
-  $(package)_config_opts+=--with-build-cc=gcc
-  $(package)_config_opts+=--without-debug
-  $(package)_config_opts+=--without-ada
-  $(package)_config_opts+=--without-cxx-binding
-  $(package)_config_opts+=--without-cxx
-  $(package)_config_opts+=--without-ticlib
-  $(package)_config_opts+=--without-tic
-  $(package)_config_opts+=--without-progs
-  $(package)_config_opts+=--without-tests
-  $(package)_config_opts+=--without-tack
-  $(package)_config_opts+=--without-manpages
-  $(package)_config_opts+=--with-termlib=tinfo
-  $(package)_config_opts+=--disable-tic-depends
-  $(package)_config_opts+=--disable-big-strings
-  $(package)_config_opts+=--disable-ext-colors
-  $(package)_config_opts+=--enable-pc-files
-  $(package)_config_opts+=--host=$(HOST)
-  $(pacakge)_config_opts+=--without-shared
-  $(pacakge)_config_opts+=--without-pthread
-  $(pacakge)_config_opts+=--disable-rpath
-  $(pacakge)_config_opts+=--disable-colorfgbg
-  $(pacakge)_config_opts+=--disable-ext-mouse
-  $(pacakge)_config_opts+=--disable-symlinks
-  $(pacakge)_config_opts+=--enable-warnings
-  $(pacakge)_config_opts+=--enable-assertions
-  $(package)_config_opts+=--with-default-terminfo-dir=/etc/_terminfo_
-  $(package)_config_opts+=--with-terminfo-dirs=/etc/_terminfo_
-  $(pacakge)_config_opts+=--enable-database
-  $(pacakge)_config_opts+=--enable-sp-funcs
-  $(pacakge)_config_opts+=--disable-term-driver
-  $(pacakge)_config_opts+=--enable-interop
-  $(pacakge)_config_opts+=--enable-widec
-  $(package)_build_opts=CFLAGS="$($(package)_cflags) $($(package)_cppflags) -fPIC"
-endef
-
-define $(package)_preprocess_cmds
-  cp $($(package)_patch_dir)/fallback.c ncurses
-endef
-
-define $(package)_config_cmds
-  ./configure $($(package)_config_opts)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) $($(package)_build_opts) V=1
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) install.libs DESTDIR=$($(package)_staging_dir)
-endef
-

contrib/depends/packages/openssl.mk

@@ -1,71 +0,0 @@
-package=openssl
-$(package)_version=1.1.1i
-$(package)_download_path=https://www.openssl.org/source
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=e8be6a35fe41d10603c3cc635e93289ed00bf34b79671a3a4de64fcee00d5242
-
-define $(package)_set_vars
-$(package)_config_env=AR="$($(package)_ar)" ARFLAGS=$($(package)_arflags) RANLIB="$($(package)_ranlib)" CC="$($(package)_cc)"
-$(package)_config_env_arm_android=ANDROID_NDK_HOME="$(host_prefix)/native" PATH="$(host_prefix)/native/bin" CC=clang AR=ar RANLIB=ranlib
-$(package)_config_env_aarch64_android=ANDROID_NDK_HOME="$(host_prefix)/native" PATH="$(host_prefix)/native/bin" CC=clang AR=ar RANLIB=ranlib
-$(package)_build_env_arm_android=ANDROID_NDK_HOME="$(host_prefix)/native"
-$(package)_build_env_aarch64_android=ANDROID_NDK_HOME="$(host_prefix)/native"
-$(package)_config_opts=--prefix=$(host_prefix) --openssldir=$(host_prefix)/etc/openssl
-$(package)_config_opts+=no-capieng
-$(package)_config_opts+=no-dso
-$(package)_config_opts+=no-dtls1
-$(package)_config_opts+=no-ec_nistp_64_gcc_128
-$(package)_config_opts+=no-gost
-$(package)_config_opts+=no-heartbeats
-$(package)_config_opts+=no-md2
-$(package)_config_opts+=no-rc5
-$(package)_config_opts+=no-rdrand
-$(package)_config_opts+=no-rfc3779
-$(package)_config_opts+=no-sctp
-$(package)_config_opts+=no-shared
-$(package)_config_opts+=no-ssl-trace
-$(package)_config_opts+=no-ssl2
-$(package)_config_opts+=no-ssl3
-$(package)_config_opts+=no-unit-test
-$(package)_config_opts+=no-weak-ssl-ciphers
-$(package)_config_opts+=no-zlib
-$(package)_config_opts+=no-zlib-dynamic
-$(package)_config_opts+=$($(package)_cflags) $($(package)_cppflags)
-$(package)_config_opts_linux=-fPIC -Wa,--noexecstack
-$(package)_config_opts_freebsd=-fPIC -Wa,--noexecstack
-$(package)_config_opts_x86_64_linux=linux-x86_64
-$(package)_config_opts_i686_linux=linux-generic32
-$(package)_config_opts_arm_linux=linux-generic32
-$(package)_config_opts_aarch64_linux=linux-generic64
-$(package)_config_opts_arm_android=--static android-arm
-$(package)_config_opts_aarch64_android=--static android-arm64
-$(package)_config_opts_riscv64_linux=linux-generic64
-$(package)_config_opts_mipsel_linux=linux-generic32
-$(package)_config_opts_mips_linux=linux-generic32
-$(package)_config_opts_powerpc_linux=linux-generic32
-$(package)_config_opts_x86_64_darwin=darwin64-x86_64-cc
-$(package)_config_opts_x86_64_mingw32=mingw64
-$(package)_config_opts_i686_mingw32=mingw
-$(package)_config_opts_x86_64_freebsd=BSD-x86_64
-endef
-
-define $(package)_preprocess_cmds
-  sed -i.old 's|"engines", "apps", "test", "util", "tools", "fuzz"|"engines", "tools"|' Configure && \
-  sed -i -e 's|cflags --sysroot.*",|cflags",|' Configurations/15-android.conf
-endef
-
-define $(package)_config_cmds
-  ./Configure $($(package)_config_opts)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) -j1 build_libs libcrypto.pc libssl.pc openssl.pc
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) -j1 install_sw
-endef
-
-define $(package)_postprocess_cmds
-  rm -rf share bin etc
-endef

contrib/depends/packages/packages.mk

@@ -1,36 +0,0 @@
-packages:=boost openssl zeromq libiconv
-
-native_packages := native_ccache
-
-hardware_packages := hidapi protobuf libusb
-hardware_native_packages := native_protobuf
-
-android_native_packages = android_ndk
-android_packages = ncurses readline sodium
-
-darwin_native_packages = native_biplist native_ds_store native_mac_alias $(hardware_native_packages)
-darwin_packages = sodium ncurses readline $(hardware_packages)
-
-# not really native...
-freebsd_native_packages = freebsd_base
-freebsd_packages = ncurses readline sodium
-
-linux_packages = eudev ncurses readline sodium $(hardware_packages)
-linux_native_packages = $(hardware_native_packages)
-qt_packages = qt
-
-ifeq ($(build_tests),ON)
-packages += gtest
-endif
-
-ifneq ($(host_arch),riscv64)
-linux_packages += unwind
-endif
-
-mingw32_packages = icu4c sodium $(hardware_packages)
-mingw32_native_packages = $(hardware_native_packages)
-
-ifneq ($(build_os),darwin)
-darwin_native_packages += native_cctools native_cdrkit native_libdmg-hfsplus
-endif
-

contrib/depends/packages/protobuf.mk

@@ -1,31 +0,0 @@
-package=protobuf
-$(package)_version=$(native_$(package)_version)
-$(package)_download_path=$(native_$(package)_download_path)
-$(package)_file_name=$(native_$(package)_file_name)
-$(package)_sha256_hash=$(native_$(package)_sha256_hash)
-$(package)_dependencies=native_$(package)
-$(package)_cxxflags=-std=c++11
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --with-protoc=$(build_prefix)/bin/protoc
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) -C src libprotobuf.la
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) -C src install-libLTLIBRARIES install-nobase_includeHEADERS &&\
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install-pkgconfigDATA
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/libprotoc.a &&\
-  rm lib/*.la
-endef
-

contrib/depends/packages/qt.mk

@@ -1,175 +0,0 @@
-PACKAGE=qt
-$(package)_version=5.15.1
-$(package)_download_path=https://download.qt.io/official_releases/qt/5.15/$($(package)_version)/submodules
-$(package)_suffix=everywhere-src-$($(package)_version).tar.xz
-$(package)_file_name=qtbase-$($(package)_suffix)
-$(package)_sha256_hash=33960404d579675b7210de103ed06a72613bfc4305443e278e2d32a3eb1f3d8c
-$(package)_build_subdir=qtbase
-$(package)_qt_libs=corelib
-$(package)_patches=fix_qt_pkgconfig.patch fix_no_printer.patch fix_rcc_determinism.patch no-xlib.patch
-
-$(package)_qttranslations_file_name=qttranslations-$($(package)_suffix)
-$(package)_qttranslations_sha256_hash=46e0c0e3a511fbcc803a4146204062e47f6ed43b34d98a3c27372a03b8746bd8
-
-$(package)_qttools_file_name=qttools-$($(package)_suffix)
-$(package)_qttools_sha256_hash=c98ee5f0f980bf68cbf0c94d62434816a92441733de50bd9adbe9b9055f03498
-
-$(package)_extra_sources  = $($(package)_qttranslations_file_name)
-$(package)_extra_sources += $($(package)_qttools_file_name)
-
-define $(package)_set_vars
-$(package)_config_opts_release = -release
-$(package)_config_opts_debug = -debug
-$(package)_config_opts += -bindir $(build_prefix)/bin
-$(package)_config_opts += -c++std c++11
-$(package)_config_opts += -confirm-license
-$(package)_config_opts += -dbus-runtime
-$(package)_config_opts += -hostprefix $(build_prefix)
-$(package)_config_opts += -no-compile-examples
-$(package)_config_opts += -no-cups
-$(package)_config_opts += -no-egl
-$(package)_config_opts += -no-eglfs
-$(package)_config_opts += -no-evdev
-$(package)_config_opts += -no-gui
-$(package)_config_opts += -no-freetype
-$(package)_config_opts += -no-gif
-$(package)_config_opts += -no-glib
-$(package)_config_opts += -no-icu
-$(package)_config_opts += -no-ico
-$(package)_config_opts += -no-iconv
-$(package)_config_opts += -no-kms
-$(package)_config_opts += -no-linuxfb
-$(package)_config_opts += -no-libjpeg
-$(package)_config_opts += -no-libudev
-$(package)_config_opts += -no-mtdev
-$(package)_config_opts += -no-openvg
-$(package)_config_opts += -no-reduce-relocations
-$(package)_config_opts += -no-sql-db2
-$(package)_config_opts += -no-sql-ibase
-$(package)_config_opts += -no-sql-oci
-$(package)_config_opts += -no-sql-tds
-$(package)_config_opts += -no-sql-mysql
-$(package)_config_opts += -no-sql-odbc
-$(package)_config_opts += -no-sql-psql
-$(package)_config_opts += -no-sql-sqlite
-$(package)_config_opts += -no-sql-sqlite2
-$(package)_config_opts += -no-use-gold-linker
-$(package)_config_opts += -nomake examples
-$(package)_config_opts += -nomake tests
-$(package)_config_opts += -opensource
-$(package)_config_opts += -no-openssl
-$(package)_config_opts += -optimized-qmake
-$(package)_config_opts += -pch
-$(package)_config_opts += -pkg-config
-$(package)_config_opts += -prefix $(host_prefix)
-$(package)_config_opts += -no-libpng
-$(package)_config_opts += -qt-pcre
-$(package)_config_opts += -qt-harfbuzz
-$(package)_config_opts += -no-zlib
-$(package)_config_opts += -static
-$(package)_config_opts += -silent
-$(package)_config_opts += -v
-$(package)_config_opts += -no-feature-bearermanagement
-$(package)_config_opts += -no-feature-colordialog
-$(package)_config_opts += -no-feature-dial
-$(package)_config_opts += -no-feature-filesystemwatcher
-$(package)_config_opts += -no-feature-fontcombobox
-$(package)_config_opts += -no-feature-ftp
-$(package)_config_opts += -no-feature-image_heuristic_mask
-$(package)_config_opts += -no-feature-keysequenceedit
-$(package)_config_opts += -no-feature-lcdnumber
-$(package)_config_opts += -no-feature-pdf
-$(package)_config_opts += -no-feature-printdialog
-$(package)_config_opts += -no-feature-printer
-$(package)_config_opts += -no-feature-printpreviewdialog
-$(package)_config_opts += -no-feature-printpreviewwidget
-$(package)_config_opts += -no-feature-sessionmanager
-$(package)_config_opts += -no-feature-sql
-$(package)_config_opts += -no-feature-statemachine
-$(package)_config_opts += -no-feature-syntaxhighlighter
-$(package)_config_opts += -no-feature-textbrowser
-$(package)_config_opts += -no-feature-textodfwriter
-$(package)_config_opts += -no-feature-topleveldomain
-$(package)_config_opts += -no-feature-udpsocket
-$(package)_config_opts += -no-feature-undocommand
-$(package)_config_opts += -no-feature-undogroup
-$(package)_config_opts += -no-feature-undostack
-$(package)_config_opts += -no-feature-undoview
-$(package)_config_opts += -no-feature-vnc
-$(package)_config_opts += -no-feature-wizard
-$(package)_config_opts_linux = -no-fontconfig
-$(package)_config_opts_linux += -no-opengl
-$(package)_config_opts_linux += -no-xcb
-$(package)_config_opts_linux += -no-feature-xlib
-endef
-
-define $(package)_fetch_cmds
-$(call fetch_file,$(package),$($(package)_download_path),$($(package)_download_file),$($(package)_file_name),$($(package)_sha256_hash)) && \
-$(call fetch_file,$(package),$($(package)_download_path),$($(package)_qttranslations_file_name),$($(package)_qttranslations_file_name),$($(package)_qttranslations_sha256_hash)) && \
-$(call fetch_file,$(package),$($(package)_download_path),$($(package)_qttools_file_name),$($(package)_qttools_file_name),$($(package)_qttools_sha256_hash))
-endef
-
-define $(package)_extract_cmds
-  mkdir -p $($(package)_extract_dir) && \
-  echo "$($(package)_sha256_hash)  $($(package)_source)" > $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  echo "$($(package)_qttranslations_sha256_hash)  $($(package)_source_dir)/$($(package)_qttranslations_file_name)" >> $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  echo "$($(package)_qttools_sha256_hash)  $($(package)_source_dir)/$($(package)_qttools_file_name)" >> $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  $(build_SHA256SUM) -c $($(package)_extract_dir)/.$($(package)_file_name).hash && \
-  mkdir qtbase && \
-  tar --strip-components=1 -xf $($(package)_source) -C qtbase && \
-  mkdir qttranslations && \
-  tar --strip-components=1 -xf $($(package)_source_dir)/$($(package)_qttranslations_file_name) -C qttranslations && \
-  mkdir qttools && \
-  tar --strip-components=1 -xf $($(package)_source_dir)/$($(package)_qttools_file_name) -C qttools
-endef
-
-
-define $(package)_preprocess_cmds
-  sed -i.old "s|FT_Get_Font_Format|FT_Get_X11_Font_Format|" qtbase/src/platformsupport/fontdatabases/freetype/qfontengine_ft.cpp && \
-  sed -i.old "s|updateqm.commands = \$$$$\$$$$LRELEASE|updateqm.commands = $($(package)_extract_dir)/qttools/bin/lrelease|" qttranslations/translations/translations.pro && \
-  sed -i.old "/updateqm.depends =/d" qttranslations/translations/translations.pro && \
-  sed -i.old "s/src_plugins.depends = src_sql src_network/src_plugins.depends = src_network/" qtbase/src/src.pro && \
-  cp -r qtbase/mkspecs/linux-arm-gnueabi-g++ qtbase/mkspecs/bitcoin-linux-g++ && \
-  sed -i.old "s/arm-linux-gnueabi-/$(host)-/g" qtbase/mkspecs/bitcoin-linux-g++/qmake.conf && \
-  patch -p1 -i $($(package)_patch_dir)/fix_qt_pkgconfig.patch && \
-  patch -p1 -i $($(package)_patch_dir)/fix_no_printer.patch && \
-  echo "!host_build: QMAKE_CFLAGS     += $($(package)_cflags) $($(package)_cppflags)" >> qtbase/mkspecs/common/gcc-base.conf && \
-  echo "!host_build: QMAKE_CXXFLAGS   += $($(package)_cxxflags) $($(package)_cppflags)" >> qtbase/mkspecs/common/gcc-base.conf && \
-  echo "!host_build: QMAKE_LFLAGS     += $($(package)_ldflags)" >> qtbase/mkspecs/common/gcc-base.conf && \
-  patch -p1 -i $($(package)_patch_dir)/no-xlib.patch && \
-  echo "QMAKE_LINK_OBJECT_MAX = 10" >> qtbase/mkspecs/win32-g++/qmake.conf && \
-  echo "QMAKE_LINK_OBJECT_SCRIPT = object_script" >> qtbase/mkspecs/win32-g++/qmake.conf && \
-  sed -i.old "s|QMAKE_CFLAGS           += |!host_build: QMAKE_CFLAGS            = $($(package)_cflags) $($(package)_cppflags) |" qtbase/mkspecs/win32-g++/qmake.conf && \
-  sed -i.old "s|QMAKE_CXXFLAGS         += |!host_build: QMAKE_CXXFLAGS            = $($(package)_cxxflags) $($(package)_cppflags) |" qtbase/mkspecs/win32-g++/qmake.conf && \
-  sed -i.old "0,/^QMAKE_LFLAGS_/s|^QMAKE_LFLAGS_|!host_build: QMAKE_LFLAGS            = $($(package)_ldflags)\n&|" qtbase/mkspecs/win32-g++/qmake.conf && \
-  sed -i.old "s/LIBRARY_PATH/(CROSS_)?\0/g" qtbase/mkspecs/features/toolchain.prf
-endef
-
-define $(package)_config_cmds
-  export PKG_CONFIG_SYSROOT_DIR=/ && \
-  export PKG_CONFIG_LIBDIR=$(host_prefix)/lib/pkgconfig && \
-  export PKG_CONFIG_PATH=$(host_prefix)/share/pkgconfig  && \
-  ./configure $($(package)_config_opts) && \
-  echo "CONFIG += force_bootstrap" >> mkspecs/qconfig.pri && \
-  $(MAKE) sub-src-clean && \
-  cd ../qttranslations && ../qtbase/bin/qmake qttranslations.pro -o Makefile && \
-  cd translations && ../../qtbase/bin/qmake translations.pro -o Makefile && cd ../.. &&\
-  cd qttools/src/linguist/lrelease/ && ../../../../qtbase/bin/qmake lrelease.pro -o Makefile
-endef
-
-define $(package)_build_cmds
-  $(MAKE) -C src $(addprefix sub-,$($(package)_qt_libs)) && \
-  $(MAKE) -C ../qttools/src/linguist/lrelease && \
-  $(MAKE) -C ../qttranslations
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) -C src INSTALL_ROOT=$($(package)_staging_dir) $(addsuffix -install_subtargets,$(addprefix sub-,$($(package)_qt_libs))) && cd .. &&\
-  $(MAKE) -C qttools/src/linguist/lrelease INSTALL_ROOT=$($(package)_staging_dir) install_target && \
-  $(MAKE) -C qttranslations INSTALL_ROOT=$($(package)_staging_dir) install_subtargets
-endef
-
-define $(package)_postprocess_cmds
-  rm -rf native/mkspecs/ native/lib/ lib/cmake/ && \
-  rm -f lib/lib*.la lib/*.prl plugins/*/*.prl
-endef

contrib/depends/packages/readline.mk

@@ -1,32 +0,0 @@
-package=readline
-$(package)_version=8.0
-$(package)_download_path=https://ftp.gnu.org/gnu/readline
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461
-$(package)_dependencies=ncurses
-
-define $(package)_set_vars
-  $(package)_build_opts=CC="$($(package)_cc)"
-  $(package)_config_env=AR="$($(package)_ar)" RANLIB="$($(package)_ranlib)" CC="$($(package)_cc)" LDFLAGS="-L$(host_prefix)/lib" ARFLAGS=$($(package)_arflags)
-  $(package)_config_env_darwin=RANLIB="$(host_prefix)/native/bin/x86_64-apple-darwin11-ranlib" AR="$(host_prefix)/native/bin/x86_64-apple-darwin11-ar" CC="$(host_prefix)/native/bin/$($(package)_cc)"
-  $(package)_config_opts+=--prefix=$(host_prefix)
-  $(package)_config_opts+=--exec-prefix=$(host_prefix)
-  $(package)_config_opts+=--host=$(HOST)
-  $(package)_config_opts+=--disable-shared --with-curses
-  $(package)_config_opts_release=--disable-debug-mode
-  $(package)_config_opts_darwin+=RANLIB="$(host_prefix)/native/bin/x86_64-apple-darwin11-ranlib" AR="$(host_prefix)/native/bin/x86_64-apple-darwin11-ar" CC="$(host_prefix)/native/bin/$($(package)_cc)"
-  $(package)_build_opts=CFLAGS="$($(package)_cflags) $($(package)_cppflags) -fPIC"
-endef
-
-define $(package)_config_cmds
-  ./configure $($(package)_config_opts)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) $($(package)_build_opts)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) install DESTDIR=$($(package)_staging_dir) prefix=$(host_prefix) exec-prefix=$(host_prefix)
-endef
-

contrib/depends/packages/sodium.mk

@@ -1,33 +0,0 @@
-package=sodium
-$(package)_version=1.0.18
-$(package)_download_path=https://download.libsodium.org/libsodium/releases/
-$(package)_file_name=libsodium-$($(package)_version).tar.gz
-$(package)_sha256_hash=6f504490b342a4f8a4c4a02fc9b866cbef8622d5df4e5452b46be121e46636c1
-$(package)_patches=disable-glibc-getrandom-getentropy.patch fix-whitespace.patch
-
-define $(package)_set_vars
-$(package)_config_opts=--enable-static --disable-shared
-$(package)_config_opts+=--prefix=$(host_prefix)
-$(package)_config_opts_android=RANLIB=$($(package)_ranlib) AR=$($(package)_ar) CC=$($(package)_cc)
-$(package)_config_opts_darwin=RANLIB="$(host_prefix)/native/bin/x86_64-apple-darwin11-ranlib" AR="$(host_prefix)/native/bin/x86_64-apple-darwin11-ar" CC="$(host_prefix)/native/bin/$($(package)_cc)"
-endef
-
-define $(package)_config_cmds
-  patch -p1 < $($(package)_patch_dir)/disable-glibc-getrandom-getentropy.patch &&\
-  ./autogen.sh &&\
-  patch -p1 < $($(package)_patch_dir)/fix-whitespace.patch &&\
-  $($(package)_autoconf) $($(package)_config_opts) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/unbound.mk

@@ -1,28 +0,0 @@
-package=unbound
-$(package)_version=1.6.8
-$(package)_download_path=https://www.unbound.net/downloads/
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=e3b428e33f56a45417107448418865fe08d58e0e7fea199b855515f60884dd49
-$(package)_dependencies=openssl expat ldns
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --enable-static --without-pyunbound --prefix=$(host_prefix) --with-libexpat=$(host_prefix) --with-ssl=$(host_prefix) --with-libevent=no --without-pythonmodule --disable-flto --with-pthreads
-  $(package)_config_opts_linux=--with-pic
-  $(package)_config_opts_w64=--enable-static-exe --sysconfdir=/etc --prefix=$(host_prefix) --target=$(host_prefix)
-  $(package)_build_opts_mingw32=LDFLAGS="$($(package)_ldflags) -lpthread"
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) $($(package)_config_opts)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) $($(package)_build_opts)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-endef

contrib/depends/packages/unwind.mk

@@ -1,29 +0,0 @@
-package=unwind
-$(package)_version=1.2
-$(package)_download_path=https://download.savannah.nongnu.org/releases/libunwind
-$(package)_file_name=lib$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=1de38ffbdc88bd694d10081865871cd2bfbb02ad8ef9e1606aee18d65532b992
-$(package)_patches=fix_obj_order.patch
-
-define $(package)_preprocess_cmds
-  patch -p0 < $($(package)_patch_dir)/fix_obj_order.patch
-endef
-
-define $(package)_config_cmds
-  cp -f $(BASEDIR)/config.guess config/config.guess &&\
-  cp -f $(BASEDIR)/config.sub config/config.sub &&\
-  $($(package)_autoconf) --disable-shared --enable-static AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/xproto.mk

@@ -1,21 +0,0 @@
-package=xproto
-$(package)_version=7.0.26
-$(package)_download_path=https://xorg.freedesktop.org/releases/individual/proto
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=636162c1759805a5a0114a369dffdeccb8af8c859ef6e1445f26a4e6e046514f
-
-define $(package)_set_vars
-$(package)_config_opts=--disable-shared
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef

contrib/depends/packages/zeromq.mk

@@ -1,38 +0,0 @@
-package=zeromq
-$(package)_version=4.1.7
-$(package)_download_path=https://github.com/zeromq/zeromq4-1/releases/download/v$($(package)_version)/
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=31c383cfcd3be1dc8a66e448c403029e793687e70473b89c4cc0bd626e7da299
-$(package)_patches=9114d3957725acd34aa8b8d011585812f3369411.patch 9e6745c12e0b100cd38acecc16ce7db02905e27c.patch ffe62d3398d5e0191f554f61049aa7ec9fc892ae.patch
-
-define $(package)_set_vars
-  $(package)_config_opts=--without-documentation --disable-shared --without-libsodium --disable-curve
-  $(package)_config_opts_linux=--with-pic
-  $(package)_config_opts_freebsd=--with-pic
-  $(package)_cxxflags=-std=c++11
-endef
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/9114d3957725acd34aa8b8d011585812f3369411.patch && \
-  patch -p1 < $($(package)_patch_dir)/9e6745c12e0b100cd38acecc16ce7db02905e27c.patch && \
-  patch -p1 < $($(package)_patch_dir)/ffe62d3398d5e0191f554f61049aa7ec9fc892ae.patch && \
-  ./autogen.sh
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) libzmq.la
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install-libLTLIBRARIES install-includeHEADERS install-pkgconfigDATA
-endef
-
-define $(package)_postprocess_cmds
-  rm -rf bin share &&\
-  rm lib/*.la
-endef
-

contrib/depends/patches/boost/fix_aroptions.patch

@@ -1,28 +0,0 @@
---- boost_1_64_0/tools/build/src/tools/gcc.jam.O	2017-04-17 03:22:26.000000000 +0100
-+++ boost_1_64_0/tools/build/src/tools/gcc.jam	2019-11-15 15:46:16.957937137 +0000
-@@ -243,6 +243,8 @@
-     {
-         ECHO notice: using gcc archiver :: $(condition) :: $(archiver[1]) ;
-     }
-+    local arflags = [ feature.get-values <arflags> : $(options) ] ;
-+    toolset.flags gcc.archive .ARFLAGS $(condition) : $(arflags) ;
- 
-     # - Ranlib.
-     local ranlib = [ common.get-invocation-command gcc
-@@ -970,6 +972,7 @@
- # logic in intel-linux, but that is hardly worth the trouble as on Linux, 'ar'
- # is always available.
- .AR = ar ;
-+.ARFLAGS = rc ;
- .RANLIB = ranlib ;
- 
- toolset.flags gcc.archive AROPTIONS <archiveflags> ;
-@@ -1011,7 +1014,7 @@
- #
- actions piecemeal archive
- {
--    "$(.AR)" $(AROPTIONS) rc "$(<)" "$(>)"
-+    "$(.AR)" $(AROPTIONS) $(.ARFLAGS) "$(<)" "$(>)"
-     "$(.RANLIB)" "$(<)"
- }
- 

contrib/depends/patches/cmake/cmake-1-fixes.patch

@@ -1,67 +0,0 @@
-This file is part of MXE. See LICENSE.md for licensing information.
-
-Contains ad hoc patches for cross building.
-
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Tony Theodore <tonyt@logyst.com>
-Date: Fri, 12 Aug 2016 02:01:20 +1000
-Subject: [PATCH 1/3] fix windres invocation options
-
-windres doesn't recognise various gcc flags like -mms-bitfields,
--fopenmp, -mthreads etc. (basically not `-D` or `-I`)
-
-diff --git a/Modules/Platform/Windows-windres.cmake b/Modules/Platform/Windows-windres.cmake
-index 1111111..2222222 100644
---- a/Modules/Platform/Windows-windres.cmake
-+++ b/Modules/Platform/Windows-windres.cmake
-@@ -1 +1 @@
--set(CMAKE_RC_COMPILE_OBJECT "<CMAKE_RC_COMPILER> -O coff <DEFINES> <INCLUDES> <FLAGS> <SOURCE> <OBJECT>")
-+set(CMAKE_RC_COMPILE_OBJECT "<CMAKE_RC_COMPILER> -O coff <DEFINES> <INCLUDES> <SOURCE> <OBJECT>")
-
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Tony Theodore <tonyt@logyst.com>
-Date: Tue, 25 Jul 2017 20:34:56 +1000
-Subject: [PATCH 2/3] add option to disable -isystem
-
-taken from (not accepted):
-https://gitlab.kitware.com/cmake/cmake/merge_requests/895
-
-see also:
-https://gitlab.kitware.com/cmake/cmake/issues/16291
-https://gitlab.kitware.com/cmake/cmake/issues/16919
-
-diff --git a/Modules/Compiler/GNU.cmake b/Modules/Compiler/GNU.cmake
-index 1111111..2222222 100644
---- a/Modules/Compiler/GNU.cmake
-+++ b/Modules/Compiler/GNU.cmake
-@@ -42,7 +42,7 @@ macro(__compiler_gnu lang)
-   string(APPEND CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT " -O2 -g -DNDEBUG")
-   set(CMAKE_${lang}_CREATE_PREPROCESSED_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-   set(CMAKE_${lang}_CREATE_ASSEMBLY_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
--  if(NOT APPLE OR NOT CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 4) # work around #4462
-+  if(NOT APPLE OR NOT CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 4 AND (NOT MXE_DISABLE_INCLUDE_SYSTEM_FLAG)) # work around #4462
-     set(CMAKE_INCLUDE_SYSTEM_FLAG_${lang} "-isystem ")
-   endif()
- endmacro()
-
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Tony Theodore <tonyt@logyst.com>
-Date: Tue, 15 Aug 2017 15:25:06 +1000
-Subject: [PATCH 3/3] add CPACK_NSIS_EXECUTABLE variable
-
-
-diff --git a/Source/CPack/cmCPackNSISGenerator.cxx b/Source/CPack/cmCPackNSISGenerator.cxx
-index 1111111..2222222 100644
---- a/Source/CPack/cmCPackNSISGenerator.cxx
-+++ b/Source/CPack/cmCPackNSISGenerator.cxx
-@@ -384,7 +384,9 @@ int cmCPackNSISGenerator::InitializeInternal()
-   }
- #endif
- 
--  nsisPath = cmSystemTools::FindProgram("makensis", path, false);
-+  this->SetOptionIfNotSet("CPACK_NSIS_EXECUTABLE", "makensis");
-+  nsisPath = cmSystemTools::FindProgram(
-+    this->GetOption("CPACK_NSIS_EXECUTABLE"), path, false);
- 
-   if (nsisPath.empty()) {
-     cmCPackLogger(

contrib/depends/patches/icu4c/icu-001-dont-build-static-dynamic-twice.patch

@@ -1,37 +0,0 @@
-Don't build object files twice
-
-When passed --enable-static and --enable-shared, icu will generate
-both a shared and a static version of its libraries.
-
-However, in order to do so, it builds each and every object file
-twice: once with -fPIC (for the shared library), and once without
--fPIC (for the static library). While admittedly building -fPIC for a
-static library generates a slightly suboptimal code, this is what all
-the autotools-based project are doing. They build each object file
-once, and they use it for both the static and shared libraries.
-
-icu builds the object files for the shared library as .o files, and
-the object files for static library as .ao files. By simply changing
-the suffix of object files used for static libraries to ".o", we tell
-icu to use the ones built for the shared library (i.e, with -fPIC),
-and avoid the double build of icu.
-
-On a fast build server, this brings the target icu build from
-3m41.302s down to 1m43.926s (approximate numbers: some other builds
-are running on the system at the same time).
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
-Index: b/source/config/mh-linux
-===================================================================
---- a/source/config/mh-linux
-+++ b/source/config/mh-linux
-@@ -38,7 +38,7 @@
- ## Shared object suffix
- SO = so
- ## Non-shared intermediate object suffix
--STATIC_O = ao
-+STATIC_O = o
- 
- ## Compilation rules
- %.$(STATIC_O): $(srcdir)/%.c

contrib/depends/patches/libiconv/fix-whitespace.patch

@@ -1,13 +0,0 @@
-diff --git a/preload/configure b/preload/configure
-index aab5c77..e20b8f0 100755
---- a/preload/configure
-+++ b/preload/configure
-@@ -588,7 +588,7 @@ MAKEFLAGS=
- PACKAGE_NAME='libiconv'
- PACKAGE_TARNAME='libiconv'
- PACKAGE_VERSION='0'
--PACKAGE_STRING='libiconv 0'
-+PACKAGE_STRING='libiconv0'
- PACKAGE_BUGREPORT=''
- PACKAGE_URL=''
-

contrib/depends/patches/native_biplist/sorted_list.patch

@@ -1,29 +0,0 @@
---- a/biplist/__init__.py	2014-10-26 19:03:11.000000000 +0000
-+++ b/biplist/__init__.py	2016-07-19 19:30:17.663521999 +0000
-@@ -541,7 +541,7 @@
-             return HashableWrapper(n)
-         elif isinstance(root, dict):
-             n = {}
--            for key, value in iteritems(root):
-+            for key, value in sorted(iteritems(root)):
-                 n[self.wrapRoot(key)] = self.wrapRoot(value)
-             return HashableWrapper(n)
-         elif isinstance(root, list):
-@@ -616,7 +616,7 @@
-             elif isinstance(obj, dict):
-                 size = proc_size(len(obj))
-                 self.incrementByteCount('dictBytes', incr=1+size)
--                for key, value in iteritems(obj):
-+                for key, value in sorted(iteritems(obj)):
-                     check_key(key)
-                     self.computeOffsets(key, asReference=True)
-                     self.computeOffsets(value, asReference=True)
-@@ -714,7 +714,7 @@
-                 keys = []
-                 values = []
-                 objectsToWrite = []
--                for key, value in iteritems(obj):
-+                for key, value in sorted(iteritems(obj)):
-                     keys.append(key)
-                     values.append(value)
-                 for key in keys:

contrib/depends/patches/native_cctools/skip_otool.patch

@@ -1,12 +0,0 @@
---- cctools/Makefile.am.O	2016-06-09 15:06:16.000000000 +0100
-+++ cctools/Makefile.am	2019-11-18 08:59:20.078663220 +0000
-@@ -1,7 +1,7 @@
- if ISDARWIN
--SUBDIRS=libstuff ar as misc otool ld64 $(LD_CLASSIC)
-+SUBDIRS=libstuff ar as misc ld64 $(LD_CLASSIC)
- else
--SUBDIRS=libstuff ar as misc libobjc2 otool ld64 $(LD_CLASSIC)
-+SUBDIRS=libstuff ar as misc ld64 $(LD_CLASSIC)
- endif
- 
- ACLOCAL_AMFLAGS = -I m4