Merge pull request #75 from wowario/checkpoints

update checkpoints.dat for point release

.github/FUNDING.yml

@@ -1 +0,0 @@
-custom: https://www.getmonero.org/get-started/contributing/

.github/workflows/build.yml

@@ -1,184 +0,0 @@
-name: ci/gh-actions/cli
-
-on:
-  push:
-  pull_request:
-    paths-ignore:
-      - 'docs/**'
-      - '**/README.md'
-
-# The below variables reduce repetitions across similar targets
-env:
-  REMOVE_BUNDLED_BOOST : rm -rf /usr/local/share/boost
-  BUILD_DEFAULT_LINUX: |
-        cmake -S . -B build -D ARCH="default" -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Release && cmake --build build -j3
-  APT_INSTALL_LINUX: 'sudo apt -y install build-essential cmake libboost-all-dev miniupnpc libunbound-dev graphviz doxygen libunwind8-dev pkg-config libssl-dev libzmq3-dev libsodium-dev libhidapi-dev libnorm-dev libusb-1.0-0-dev libpgm-dev libprotobuf-dev protobuf-compiler ccache'
-  APT_SET_CONF: |
-        echo "Acquire::Retries \"3\";"         | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::http::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::ftp::Timeout \"120\";"  | sudo tee -a /etc/apt/apt.conf.d/80-custom
-  CCACHE_SETTINGS: |
-        ccache --max-size=150M
-        ccache --set-config=compression=true
-
-jobs:
-  build-macos:
-    runs-on: macOS-latest
-    env:
-      CCACHE_TEMPDIR: /tmp/.ccache-temp
-    steps:
-    - uses: actions/checkout@v3
-      with:
-        submodules: recursive
-    - uses: actions/cache@v3
-      with:
-        path: /Users/runner/Library/Caches/ccache
-        key: ccache-${{ runner.os }}-build-${{ github.sha }}
-        restore-keys: ccache-${{ runner.os }}-build-
-    - name: install dependencies
-      run: HOMEBREW_NO_AUTO_UPDATE=1 brew install boost hidapi openssl zmq libpgm miniupnpc expat libunwind-headers protobuf ccache
-    - name: build
-      run: |
-        ${{env.CCACHE_SETTINGS}}
-        make -j3
-
-  build-windows:
-    runs-on: windows-latest
-    env:
-      CCACHE_TEMPDIR: C:\Users\runneradmin\.ccache-temp
-      CCACHE_DIR: C:\Users\runneradmin\.ccache
-    defaults:
-      run:
-        shell: msys2 {0}
-    steps:
-    - uses: actions/checkout@v3
-      with:
-        submodules: recursive
-    - uses: actions/cache@v3
-      with:
-        path: C:\Users\runneradmin\.ccache
-        key: ccache-${{ runner.os }}-build-${{ github.sha }}
-        restore-keys: ccache-${{ runner.os }}-build-
-    - uses: msys2/setup-msys2@v2
-      with:
-        update: true
-        install: mingw-w64-x86_64-toolchain make mingw-w64-x86_64-cmake mingw-w64-x86_64-ccache mingw-w64-x86_64-boost mingw-w64-x86_64-openssl mingw-w64-x86_64-zeromq mingw-w64-x86_64-libsodium mingw-w64-x86_64-hidapi mingw-w64-x86_64-protobuf-c mingw-w64-x86_64-libusb mingw-w64-x86_64-unbound git
-    - name: build
-      run: |
-        ${{env.CCACHE_SETTINGS}}
-        make release-static-win64 -j2
-
-# See the OS labels and monitor deprecations here:
-# https://docs.github.com/en/actions/using-github-hosted-runners/about-github-hosted-runners#supported-runners-and-hardware-resources
-
-  build-ubuntu:
-    runs-on: ${{ matrix.os }}
-    env:
-      CCACHE_TEMPDIR: /tmp/.ccache-temp
-    strategy:
-      matrix:
-        os: [ubuntu-22.04, ubuntu-20.04]
-    steps:
-    - uses: actions/checkout@v3
-      with:
-        submodules: recursive
-    - uses: actions/cache@v3
-      with:
-        path: ~/.ccache
-        key: ccache-${{ runner.os }}-build-${{ matrix.os }}-${{ github.sha }}
-        restore-keys: ccache-${{ runner.os }}-build-${{ matrix.os }}
-    - name: remove bundled boost
-      run: ${{env.REMOVE_BUNDLED_BOOST}}
-    - name: set apt conf
-      run: ${{env.APT_SET_CONF}}
-    - name: update apt
-      run: sudo apt update
-    - name: install monero dependencies
-      run: ${{env.APT_INSTALL_LINUX}}
-    - name: build
-      run: |
-        ${{env.CCACHE_SETTINGS}}
-        ${{env.BUILD_DEFAULT_LINUX}}
-
-  libwallet-ubuntu:
-    runs-on: ubuntu-20.04
-    env:
-      CCACHE_TEMPDIR: /tmp/.ccache-temp
-    steps:
-    - uses: actions/checkout@v3
-      with:
-        submodules: recursive
-    - uses: actions/cache@v3
-      with:
-        path: ~/.ccache
-        key: ccache-${{ runner.os }}-libwallet-${{ github.sha }}
-        restore-keys: ccache-${{ runner.os }}-libwallet-
-    - name: remove bundled boost
-      run: ${{env.REMOVE_BUNDLED_BOOST}}
-    - name: set apt conf
-      run: ${{env.APT_SET_CONF}}
-    - name: update apt
-      run: sudo apt update
-    - name: install monero dependencies
-      run: ${{env.APT_INSTALL_LINUX}}
-    - name: build
-      run: |
-        ${{env.CCACHE_SETTINGS}}
-        cmake .
-        make wallet_api -j3
-
-  test-ubuntu:
-    needs: build-ubuntu
-    runs-on: ubuntu-20.04
-    env:
-      CCACHE_TEMPDIR: /tmp/.ccache-temp
-    steps:
-    - uses: actions/checkout@v3
-      with:
-        submodules: recursive
-    - name: ccache
-      uses: actions/cache@v3
-      with:
-        path: ~/.ccache
-        key: ccache-${{ runner.os }}-build-ubuntu-latest-${{ github.sha }}
-        restore-keys: ccache-${{ runner.os }}-build-ubuntu-latest
-    - name: remove bundled boost
-      run: ${{env.REMOVE_BUNDLED_BOOST}}
-    - name: set apt conf
-      run: ${{env.APT_SET_CONF}}
-    - name: update apt
-      run: sudo apt update
-    - name: install monero dependencies
-      run: ${{env.APT_INSTALL_LINUX}}
-    - name: install Python dependencies
-      run: pip install requests psutil monotonic zmq deepdiff
-    - name: tests
-      env:
-        CTEST_OUTPUT_ON_FAILURE: ON
-        DNS_PUBLIC: tcp://9.9.9.9
-      run: |
-        ${{env.CCACHE_SETTINGS}}
-        ${{env.BUILD_DEFAULT_LINUX}}
-        cmake --build build --target test
-
-# ARCH="default" (not "native") ensures, that a different execution host can execute binaries compiled elsewhere.
-# BUILD_SHARED_LIBS=ON speeds up the linkage part a bit, reduces size, and is the only place where the dynamic linkage is tested.
-
-  source-archive:
-    runs-on: ubuntu-20.04
-    steps:
-    - uses: actions/checkout@v3
-      with:
-        fetch-depth: 0
-        submodules: recursive
-    - name: archive
-      run: |
-        pip install git-archive-all
-        export VERSION="monero-$(git describe)"
-        export OUTPUT="$VERSION.tar"
-        echo "OUTPUT=$OUTPUT" >> $GITHUB_ENV
-        /home/runner/.local/bin/git-archive-all --prefix "$VERSION/" --force-submodules "$OUTPUT"
-    - uses: actions/upload-artifact@v3
-      with:
-        name: ${{ env.OUTPUT }}
-        path: /home/runner/work/monero/monero/${{ env.OUTPUT }}

.github/workflows/depends.yml

@@ -1,106 +0,0 @@
-name: ci/gh-actions/depends
-
-on:
-  push:
-  pull_request:
-    paths-ignore:
-      - 'docs/**'
-      - '**/README.md'
-
-env:
-  APT_SET_CONF: |
-        echo "Acquire::Retries \"3\";"         | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::http::Timeout \"120\";" | sudo tee -a /etc/apt/apt.conf.d/80-custom
-        echo "Acquire::ftp::Timeout \"120\";"  | sudo tee -a /etc/apt/apt.conf.d/80-custom
-  CCACHE_SETTINGS: |
-        ccache --max-size=150M
-        ccache --set-config=compression=true
-
-jobs:
-  build-cross:
-    runs-on: ubuntu-20.04
-    env:
-      CCACHE_TEMPDIR: /tmp/.ccache-temp
-    strategy:
-      fail-fast: false
-      matrix:
-        toolchain:
-          - name: "RISCV 64bit"
-            host: "riscv64-linux-gnu"
-            packages: "python3 gperf g++-riscv64-linux-gnu"
-          - name: "ARM v7"
-            host: "arm-linux-gnueabihf"
-            packages: "python3 gperf g++-arm-linux-gnueabihf"
-          - name: "ARM v8"
-            host: "aarch64-linux-gnu"
-            packages: "python3 gperf g++-aarch64-linux-gnu"
-          - name: "i686 Win"
-            host: "i686-w64-mingw32"
-            packages: "python3 g++-mingw-w64-i686"
-          - name: "i686 Linux"
-            host: "i686-pc-linux-gnu"
-            packages: "gperf cmake g++-multilib python3-zmq"
-          - name: "Win64"
-            host: "x86_64-w64-mingw32"
-            packages: "cmake python3 g++-mingw-w64-x86-64"
-          - name: "x86_64 Linux"
-            host: "x86_64-unknown-linux-gnu"
-            packages: "gperf cmake python3-zmq libdbus-1-dev libharfbuzz-dev"
-          - name: "Cross-Mac x86_64"
-            host: "x86_64-apple-darwin11"
-            packages: "cmake imagemagick libcap-dev librsvg2-bin libz-dev libbz2-dev libtiff-tools python-dev python3-setuptools-git"
-          - name: "Cross-Mac aarch64"
-            host: "aarch64-apple-darwin11"
-            packages: "cmake imagemagick libcap-dev librsvg2-bin libz-dev libbz2-dev libtiff-tools python-dev python3-setuptools-git"
-          - name: "x86_64 Freebsd"
-            host: "x86_64-unknown-freebsd"
-            packages: "clang-8 gperf cmake python3-zmq libdbus-1-dev libharfbuzz-dev"
-    name: ${{ matrix.toolchain.name }}
-    steps:
-    - uses: actions/checkout@v3
-      with:
-        fetch-depth: 0
-        submodules: recursive
-# Most volatile cache
-    - name: ccache
-      uses: actions/cache@v3
-      with:
-        path: ~/.ccache
-        key: ccache-${{ matrix.toolchain.host }}-${{ github.sha }}
-        restore-keys: ccache-${{ matrix.toolchain.host }}-
-# Less volatile cache
-    - name: depends cache
-      uses: actions/cache@v3
-      with:
-        path: contrib/depends/built
-        key: depends-${{ matrix.toolchain.host }}-${{ hashFiles('contrib/depends/packages/*') }}
-        restore-keys: |
-          depends-${{ matrix.toolchain.host }}-${{ hashFiles('contrib/depends/packages/*') }}
-          depends-${{ matrix.toolchain.host }}-
-# Static cache
-    - name: OSX SDK cache
-      uses: actions/cache@v3
-      with:
-        path: contrib/depends/sdk-sources
-        key: sdk-${{ matrix.toolchain.host }}-${{ matrix.toolchain.osx_sdk }}
-        restore-keys: sdk-${{ matrix.toolchain.host }}-${{ matrix.toolchain.osx_sdk }}
-    - name: set apt conf
-      run: ${{env.APT_SET_CONF}}
-    - name: install dependencies
-      run: sudo apt update; sudo apt -y install build-essential libtool cmake autotools-dev automake pkg-config bsdmainutils curl git ca-certificates ccache ${{ matrix.toolchain.packages }}
-    - name: prepare w64-mingw32
-      if: ${{ matrix.toolchain.host == 'x86_64-w64-mingw32' || matrix.toolchain.host == 'i686-w64-mingw32' }}
-      run: |
-        sudo update-alternatives --set ${{ matrix.toolchain.host }}-g++ $(which ${{ matrix.toolchain.host }}-g++-posix)
-        sudo update-alternatives --set ${{ matrix.toolchain.host }}-gcc $(which ${{ matrix.toolchain.host }}-gcc-posix)
-    - name: build
-      run: |
-        ${{env.CCACHE_SETTINGS}}
-        make depends target=${{ matrix.toolchain.host }} -j2
-    - uses: actions/upload-artifact@v3
-      if: ${{ matrix.toolchain.host == 'x86_64-w64-mingw32' || matrix.toolchain.host == 'x86_64-apple-darwin11' || matrix.toolchain.host == 'x86_64-unknown-linux-gnu' }}
-      with:
-        name: ${{ matrix.toolchain.name }}
-        path: |
-          /home/runner/work/monero/monero/build/${{ matrix.toolchain.host }}/release/bin/monero-wallet-cli*
-          /home/runner/work/monero/monero/build/${{ matrix.toolchain.host }}/release/bin/monerod*

.github/workflows/gitian.yml

@@ -1,49 +0,0 @@
-name: ci/gh-actions/gitian
-
-on:
-  push:
-    tags:
-      - '*'
-
-jobs:
-  build-gitian:
-    runs-on: ubuntu-20.04
-    strategy:
-      fail-fast: false
-      matrix:
-        operating-system:
-          - name: "Linux"
-            option: "l"
-          - name: "Windows"
-            option: "w"
-          - name: "Android"
-            option: "a"
-          - name: "FreeBSD"
-            option: "f"
-          - name: "macOS"
-            option: "m"
-    name: ${{ matrix.operating-system.name }}
-    steps:
-    - name: prepare
-      run: |
-        sudo apt update
-        curl -O https://raw.githubusercontent.com/monero-project/monero/${{ github.ref_name }}/contrib/gitian/gitian-build.py
-        chmod +x gitian-build.py
-    - name: setup
-      run: |
-        ./gitian-build.py --setup --docker github-actions ${{ github.ref_name }}
-    - name: build
-      run: |
-        ./gitian-build.py --docker --detach-sign --no-commit --build -j 3 -o ${{ matrix.operating-system.option }} github-actions ${{ github.ref_name }}
-    - name: post build
-      run: |
-        cd out/${{ github.ref_name }}
-        shasum -a256 *
-        echo \`\`\` >> $GITHUB_STEP_SUMMARY
-        shasum -a256 * >> $GITHUB_STEP_SUMMARY
-        echo \`\`\` >> $GITHUB_STEP_SUMMARY
-    - uses: actions/upload-artifact@v3
-      with:
-        name: ${{ matrix.operating-system.name }}
-        path: |
-          out/${{ github.ref_name }}/*

.gitignore

@@ -23,13 +23,6 @@ cscope.po.out
 external/miniupnpc/Makefile
 miniupnpcstrings.h
 version/
-ClangBuildAnalyzerSession.txt
-
-# gitian
-contrib/gitian/builder/
-contrib/gitian/docker/
-contrib/gitian/sigs/
-
 # Created by https://www.gitignore.io
 
 ### C++ ###
@@ -76,8 +69,6 @@ cmake-build-debug/
 # KDE directory preferences
 .directory
 
-### VSCode ###
-.vscode/
 
 ### Eclipse ###
 *.pydevproject
@@ -105,9 +96,6 @@ local.properties
 # PDT-specific
 .buildpath
 
-# Netbeans-specific
-nbproject
-
 # sbteclipse plugin
 .target
 
@@ -115,8 +103,4 @@ nbproject
 .texlipse
 .idea/
 
-/testnet
-
-__pycache__/
-*.pyc
-*.log
+/testnet

.gitmodules

@@ -1,19 +1,12 @@
+
+[submodule "external/unbound"]
+	path = external/unbound
+	url = https://github.com/monero-project/unbound
+	branch = monero
 [submodule "external/miniupnp"]
 	path = external/miniupnp
-	url = https://github.com/miniupnp/miniupnp
+	url = https://github.com/monero-project/miniupnp
+	branch = monero
 [submodule "external/rapidjson"]
 	path = external/rapidjson
 	url = https://github.com/Tencent/rapidjson
-[submodule "external/trezor-common"]
-	active = false
-	path = external/trezor-common
-	url = https://github.com/trezor/trezor-common.git
-[submodule "external/supercop"]
-	path = external/supercop
-	url = https://github.com/monero-project/supercop
-	branch = monero
-[submodule "external/randomwow"]
-	path = external/randomwow
-	url = https://git.wownero.com/wownero/RandomWOW
-        branch = 1.2.1-wow
-

CMakeLists_IOS.txt

@@ -1,4 +1,4 @@
-# Portions Copyright (c) 2017-2022, The Monero Project
+# Portions Copyright (c) 2017-2018, The Monero Project
 # This file is based off of the https://code.google.com/archive/p/ios-cmake/
 # It has been altered for Monero iOS development
 #

CONTRIBUTING.md

@@ -1,7 +1,7 @@
 # Contributing to Monero
 
 A good way to help is to test, and report bugs. See
-[How to Report Bugs Effectively (by Simon Tatham)](https://www.chiark.greenend.org.uk/~sgtatham/bugs.html)
+[How to Report Bugs Effectively (by Simon Tatham)](http://www.chiark.greenend.org.uk/~sgtatham/bugs.html)
 if you want to help that way. Testing is invaluable in making a piece
 of software solid and usable.
 
@@ -12,15 +12,14 @@ of software solid and usable.
 * If modifying code for which Doxygen headers exist, that header must be modified to match.
 * Tests would be nice to have if you're adding functionality.
 
-Patches are preferably to be sent via a GitHub pull request. If that
+Patches are preferably to be sent via a Github pull request. If that
 can't be done, patches in "git format-patch" format can be sent
 (eg, posted to fpaste.org with a long enough timeout and a link
-posted to #monero-dev on irc.libera.chat).
+posted to #monero-dev on irc.freenode.net).
 
 Patches should be self contained. A good rule of thumb is to have
 one patch per separate issue, feature, or logical change. Also, no
-other changes, such as random whitespace changes, reindentation,
-or fixing typos, spelling, or wording, unless user visible.
+other changes, such as random whitespace changes or reindentation.
 Following the code style of the particular chunk of code you're
 modifying is encouraged. Proper squashing should be done (eg, if
 you're making a buggy patch, then a later patch to fix the bug,
@@ -43,7 +42,7 @@ Commit messages should be sensible. That means a subject line that
 describes the patch, with an optional longer body that gives details,
 documentation, etc.
 
-When submitting a pull request on GitHub, make sure your branch is
+When submitting a pull request on Github, make sure your branch is
 rebased. No merge commits nor stray commits from other people in
 your submitted branch, please. You may be asked to rebase if there
 are conflicts (even trivially resolvable ones).
@@ -56,7 +55,7 @@ the previous paragraph is here.
 ## License
 
 Copyright (c) 2009-2015 Pieter Hintjens.
-Copyright (c) 2017-2022, The Monero Project
+Copyright (c) 2017-2018 The Monero Project.
 
 This Specification is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version.
 
@@ -88,26 +87,26 @@ C4 is meant to provide a reusable optimal collaboration model for open source so
 
 ### Preliminaries
 
-- The project MUST use the git distributed revision control system.
-- The project MUST be hosted on github.com or equivalent, herein called the "Platform".
-- The project MUST use the Platform issue tracker.
+- The project SHALL use the git distributed revision control system.
+- The project SHALL be hosted on github.com or equivalent, herein called the "Platform".
+- The project SHALL use the Platform issue tracker.
   - Non-GitHub example:
     - "Platform" could be a vanilla git repo and Trac hosted on the same machine/network.
     - The Platform issue tracker would be Trac.
 - The project SHOULD have clearly documented guidelines for code style.
 - A "Contributor" is a person who wishes to provide a patch, being a set of commits that solve some clearly identified problem.
 - A "Maintainer" is a person who merges patches to the project. Maintainers are not developers; their job is to enforce process.
-- Contributors MUST NOT have commit access to the repository unless they are also Maintainers.
-- Maintainers MUST have commit access to the repository.
-- Everyone, without distinction or discrimination, MUST have an equal right to become a Contributor under the terms of this contract.
+- Contributors SHALL NOT have commit access to the repository unless they are also Maintainers.
+- Maintainers SHALL have commit access to the repository.
+- Everyone, without distinction or discrimination, SHALL have an equal right to become a Contributor under the terms of this contract.
 
 ### Licensing and ownership
 
-- The project MUST use a share-alike license, such as BSD-3, the GPLv3 or a variant thereof (LGPL, AGPL), or the MPLv2.
-- All contributions to the project source code ("patches") MUST use the same license as the project.
-- All patches are owned by their authors. There MUST NOT be any copyright assignment process.
-- The copyrights in the project MUST be owned collectively by all its Contributors.
-- Each Contributor MUST be responsible for identifying themselves in the project Contributor list.
+- The project SHALL use a share-alike license, such as BSD-3, the GPLv3 or a variant thereof (LGPL, AGPL), or the MPLv2.
+- All contributions to the project source code ("patches") SHALL use the same license as the project.
+- All patches are owned by their authors. There SHALL NOT be any copyright assignment process.
+- The copyrights in the project SHALL be owned collectively by all its Contributors.
+- Each Contributor SHALL be responsible for identifying themselves in the project Contributor list.
 
 ### Patch requirements
 
@@ -116,27 +115,27 @@ C4 is meant to provide a reusable optimal collaboration model for open source so
 - A patch SHOULD be a minimal and accurate answer to exactly one identified and agreed problem.
 - A patch MUST adhere to the code style guidelines of the project if these are defined.
 - A patch MUST adhere to the "Evolution of Public Contracts" guidelines defined below.
-- A patch MUST NOT include non-trivial code from other projects unless the Contributor is the original author of that code.
+- A patch SHALL NOT include non-trivial code from other projects unless the Contributor is the original author of that code.
 - A patch MUST compile cleanly and pass project self-tests on at least the principle target platform.
 - A patch commit message SHOULD consist of a single short (less than 50 character) line summarizing the change, optionally followed by a blank line and then a more thorough description.
 - A "Correct Patch" is one that satisfies the above requirements.
 
 ### Development process
 
-- Change on the project MUST be governed by the pattern of accurately identifying problems and applying minimal, accurate solutions to these problems.
+- Change on the project SHALL be governed by the pattern of accurately identifying problems and applying minimal, accurate solutions to these problems.
 - To request changes, a user SHOULD log an issue on the project Platform issue tracker.
 - The user or Contributor SHOULD write the issue by describing the problem they face or observe.
 - The user or Contributor SHOULD seek consensus on the accuracy of their observation, and the value of solving the problem.
-- Users MUST NOT log feature requests, ideas, or suggestions unrelated to Monero code or Monero's dependency code or Monero's potential/future dependency code or research which successfully implements Monero.
-- Users MUST NOT log any solutions to problems (verifiable or hypothetical) of which are not explicitly documented and/or not provable and/or cannot be reasonably proven.
-- Thus, the release history of the project MUST be a list of meaningful issues logged and solved.
-- To work on an issue, a Contributor MUST fork the project repository and then work on their forked repository.
-- To submit a patch, a Contributor MUST create a Platform pull request back to the project.
-- A Contributor MUST NOT commit changes directly to the project.
+- Users SHALL NOT log feature requests, ideas, or suggestions unrelated to Monero code or Monero's dependency code or Monero's potential/future dependency code or research which successfully implements Monero.
+- Users SHALL NOT log any solutions to problems (verifiable or hypothetical) of which are not explicitly documented and/or not provable and/or cannot be reasonably proven.
+- Thus, the release history of the project SHALL be a list of meaningful issues logged and solved.
+- To work on an issue, a Contributor SHALL fork the project repository and then work on their forked repository.
+- To submit a patch, a Contributor SHALL create a Platform pull request back to the project.
+- A Contributor SHALL NOT commit changes directly to the project.
 - To discuss a patch, people MAY comment on the Platform pull request, on the commit, or elsewhere.
-- To accept or reject a patch, a Maintainer MUST use the Platform interface.
+- To accept or reject a patch, a Maintainer SHALL use the Platform interface.
 - Maintainers SHOULD NOT merge their own patches except in exceptional cases, such as non-responsiveness from other Maintainers for an extended period (more than 30 days) or unless urgent as defined by the Monero Maintainers Team.
-- Maintainers MUST NOT make value judgments on correct patches unless the Maintainer (as may happen in rare circumstances) is a core code developer.
+- Maintainers SHALL NOT make value judgments on correct patches unless the Maintainer (as may happen in rare circumstances) is a core code developer.
 - Maintainers MUST NOT merge pull requests in less than 168 hours (1 week) unless deemed urgent by at least 2 people from the Monero Maintainer Team.
 - The Contributor MAY tag an issue as "Ready" after making a pull request for the issue.
 - The user who created an issue SHOULD close the issue after checking the patch is successful.
@@ -146,27 +145,27 @@ C4 is meant to provide a reusable optimal collaboration model for open source so
 
 ### Creating stable releases
 
-- The project MUST have one branch ("master") that always holds the latest in-progress version and SHOULD always build.
-- The project MUST NOT use topic branches for any reason. Personal forks MAY use topic branches.
-- To make a stable release someone MUST fork the repository by copying it and thus become maintainer of this repository.
+- The project SHALL have one branch ("master") that always holds the latest in-progress version and SHOULD always build.
+- The project SHALL NOT use topic branches for any reason. Personal forks MAY use topic branches.
+- To make a stable release someone SHALL fork the repository by copying it and thus become maintainer of this repository.
 - Forking a project for stabilization MAY be done unilaterally and without agreement of project maintainers.
-- A patch to a stabilization project declared "stable" MUST be accompanied by a reproducible test case.
+- A patch to a stabilization project declared "stable" SHALL be accompanied by a reproducible test case.
 
 ### Evolution of public contracts
 
-- All Public Contracts (APIs or protocols) MUST be documented.
+- All Public Contracts (APIs or protocols) SHALL be documented.
 - All Public Contracts SHOULD have space for extensibility and experimentation.
 - A patch that modifies a stable Public Contract SHOULD not break existing applications unless there is overriding consensus on the value of doing this.
 - A patch that introduces new features to a Public Contract SHOULD do so using new names.
 - Old names SHOULD be deprecated in a systematic fashion by marking new names as "experimental" until they are stable, then marking the old names as "deprecated".
 - When sufficient time has passed, old deprecated names SHOULD be marked "legacy" and eventually removed.
-- Old names MUST NOT be reused by new features.
+- Old names SHALL NOT be reused by new features.
 - When old names are removed, their implementations MUST provoke an exception (assertion) if used by applications.
 
 ### Project administration
 
-- The project founders MUST act as Administrators to manage the set of project Maintainers.
-- The Administrators MUST ensure their own succession over time by promoting the most effective Maintainers.
-- A new Contributor who makes a correct patch MUST be invited to become a Maintainer.
+- The project founders SHALL act as Administrators to manage the set of project Maintainers.
+- The Administrators SHALL ensure their own succession over time by promoting the most effective Maintainers.
+- A new Contributor who makes a correct patch SHALL be invited to become a Maintainer.
 - Administrators MAY remove Maintainers who are inactive for an extended period of time, or who repeatedly fail to apply this process accurately.
 - Administrators SHOULD block or ban "bad actors" who cause stress and pain to others in the project. This should be done after public discussion, with a chance for all parties to speak. A bad actor is someone who repeatedly ignores the rules and culture of the project, who is needlessly argumentative or hostile, or who is offensive, and who is unable to self-correct their behavior when asked to do so by others.

Dockerfile

@@ -1,66 +1,117 @@
 # Multistage docker build, requires docker 17.05
 
 # builder stage
-FROM ubuntu:20.04 as builder
+FROM ubuntu:16.04 as builder
 
-RUN set -ex && \
-    apt-get update && \
-    DEBIAN_FRONTEND=noninteractive apt-get --no-install-recommends --yes install \
-        automake \
-        autotools-dev \
-        bsdmainutils \
-        build-essential \
+RUN apt-get update && \
+    apt-get --no-install-recommends --yes install \
         ca-certificates \
-        ccache \
         cmake \
-        curl \
-        git \
-        libtool \
+        g++ \
+        make \
         pkg-config \
-        gperf
+        graphviz \
+        doxygen \
+        git \
+        curl \
+        libtool-bin \
+        autoconf \
+        automake
+
+WORKDIR /usr/local
+
+## Boost
+ARG BOOST_VERSION=1_66_0
+ARG BOOST_VERSION_DOT=1.66.0
+ARG BOOST_HASH=5721818253e6a0989583192f96782c4a98eb6204965316df9f5ad75819225ca9
+RUN curl -s -L -o  boost_${BOOST_VERSION}.tar.bz2 https://dl.bintray.com/boostorg/release/${BOOST_VERSION_DOT}/source/boost_${BOOST_VERSION}.tar.bz2 \
+    && echo "${BOOST_HASH} boost_${BOOST_VERSION}.tar.bz2" | sha256sum -c \
+    && tar -xvf boost_${BOOST_VERSION}.tar.bz2 \
+    && cd boost_${BOOST_VERSION} \
+    && ./bootstrap.sh \
+    && ./b2 --build-type=minimal link=static runtime-link=static --with-chrono --with-date_time --with-filesystem --with-program_options --with-regex --with-serialization --with-system --with-thread --with-locale threading=multi threadapi=pthread cflags="-fPIC" cxxflags="-fPIC" stage
+ENV BOOST_ROOT /usr/local/boost_${BOOST_VERSION}
+
+# OpenSSL
+ARG OPENSSL_VERSION=1.0.2n
+ARG OPENSSL_HASH=370babb75f278c39e0c50e8c4e7493bc0f18db6867478341a832a982fd15a8fe
+RUN curl -s -O https://www.openssl.org/source/openssl-${OPENSSL_VERSION}.tar.gz \
+    && echo "${OPENSSL_HASH} openssl-${OPENSSL_VERSION}.tar.gz" | sha256sum -c \
+    && tar -xzf openssl-${OPENSSL_VERSION}.tar.gz \
+    && cd openssl-${OPENSSL_VERSION} \
+    && ./Configure linux-x86_64 no-shared --static -fPIC \
+    && make build_crypto build_ssl \
+    && make install
+ENV OPENSSL_ROOT_DIR=/usr/local/openssl-${OPENSSL_VERSION}
+
+# ZMQ
+ARG ZMQ_VERSION=v4.2.3
+ARG ZMQ_HASH=3226b8ebddd9c6c738ba42986822c26418a49afb
+RUN git clone https://github.com/zeromq/libzmq.git -b ${ZMQ_VERSION} \
+    && cd libzmq \
+    && test `git rev-parse HEAD` = ${ZMQ_HASH} || exit 1 \
+    && ./autogen.sh \
+    && CFLAGS="-fPIC" CXXFLAGS="-fPIC" ./configure --enable-static --disable-shared \
+    && make \
+    && make install \
+    && ldconfig
+
+# zmq.hpp
+ARG CPPZMQ_HASH=6aa3ab686e916cb0e62df7fa7d12e0b13ae9fae6
+RUN git clone https://github.com/zeromq/cppzmq.git -b ${ZMQ_VERSION} \
+    && cd cppzmq \
+    && test `git rev-parse HEAD` = ${CPPZMQ_HASH} || exit 1 \
+    && mv *.hpp /usr/local/include
+
+# Readline
+ARG READLINE_VERSION=7.0
+ARG READLINE_HASH=750d437185286f40a369e1e4f4764eda932b9459b5ec9a731628393dd3d32334
+RUN curl -s -O https://ftp.gnu.org/gnu/readline/readline-${READLINE_VERSION}.tar.gz \
+    && echo "${READLINE_HASH} readline-${READLINE_VERSION}.tar.gz" | sha256sum -c \
+    && tar -xzf readline-${READLINE_VERSION}.tar.gz \
+    && cd readline-${READLINE_VERSION} \
+    && CFLAGS="-fPIC" CXXFLAGS="-fPIC" ./configure \
+    && make \
+    && make install
+
+# Sodium
+ARG SODIUM_VERSION=1.0.16
+ARG SODIUM_HASH=675149b9b8b66ff44152553fb3ebf9858128363d
+RUN git clone https://github.com/jedisct1/libsodium.git -b ${SODIUM_VERSION} \
+    && cd libsodium \
+    && test `git rev-parse HEAD` = ${SODIUM_HASH} || exit 1 \
+    && ./autogen.sh \
+    && CFLAGS="-fPIC" CXXFLAGS="-fPIC" ./configure \
+    && make \
+    && make check \
+    && make install
 
 WORKDIR /src
 COPY . .
 
 ARG NPROC
-RUN set -ex && \
-    git submodule init && git submodule update && \
-    rm -rf build && \
-    if [ -z "$NPROC" ] ; \
-    then make -j$(nproc) depends target=x86_64-linux-gnu ; \
-    else make -j$NPROC depends target=x86_64-linux-gnu ; \
-    fi
+RUN rm -rf build && \
+    if [ -z "$NPROC" ];then make -j$(nproc) release-static;else make -j$NPROC release-static;fi
 
 # runtime stage
-FROM ubuntu:20.04
+FROM ubuntu:16.04
 
-RUN set -ex && \
-    apt-get update && \
+RUN apt-get update && \
     apt-get --no-install-recommends --yes install ca-certificates && \
     apt-get clean && \
     rm -rf /var/lib/apt
-COPY --from=builder /src/build/x86_64-linux-gnu/release/bin /usr/local/bin/
 
-# Create wownero user
-RUN adduser --system --group --disabled-password wownero && \
-	mkdir -p /wallet /home/wownero/.wownero && \
-	chown -R wownero:wownero /home/wownero/.wownero && \
-	chown -R wownero:wownero /wallet
+COPY --from=builder /src/build/release/bin/* /usr/local/bin/
 
 # Contains the blockchain
-VOLUME /home/wownero/.wownero
+VOLUME /root/.bitmonero
 
 # Generate your wallet via accessing the container and run:
 # cd /wallet
-# wownero-wallet-cli
+# monero-wallet-cli
 VOLUME /wallet
 
-EXPOSE 34567
-EXPOSE 34568
-
-# switch to user wownero
-USER wownero
-
-ENTRYPOINT ["wownerod"]
-CMD ["--p2p-bind-ip=0.0.0.0", "--p2p-bind-port=34567", "--rpc-bind-ip=0.0.0.0", "--rpc-bind-port=34568", "--non-interactive", "--confirm-external-bind"]
+EXPOSE 18080
+EXPOSE 18081
 
+ENTRYPOINT ["monerod", "--p2p-bind-ip=0.0.0.0", "--p2p-bind-port=18080", "--rpc-bind-ip=0.0.0.0", "--rpc-bind-port=18081", "--non-interactive", "--confirm-external-bind"] 

Doxyfile

@@ -20,7 +20,7 @@
 # This tag specifies the encoding used for all characters in the config file
 # that follow. The default is UTF-8 which is also the encoding used for all text
 # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See https://www.gnu.org/software/libiconv
+# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
 # for the list of possible encodings.
 # The default value is: UTF-8.
 
@@ -68,7 +68,7 @@ OUTPUT_DIRECTORY       = doc
 # performance problems for the file system.
 # The default value is: NO.
 
-CREATE_SUBDIRS         = YES
+CREATE_SUBDIRS         = NO
 
 # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
 # characters to appear in the names of generated files. If set to NO, non-ASCII
@@ -285,7 +285,7 @@ EXTENSION_MAPPING      =
 
 # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
 # according to the Markdown format, which allows for more readable
-# documentation. See https://daringfireball.net/projects/markdown/ for details.
+# documentation. See http://daringfireball.net/projects/markdown/ for details.
 # The output of markdown processing is further processed by doxygen, so you can
 # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
 # case of backward compatibilities issues.
@@ -318,7 +318,7 @@ BUILTIN_STL_SUPPORT    = NO
 CPP_CLI_SUPPORT        = NO
 
 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# https://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
 # will parse them like normal C++ but will assume all classes use public instead
 # of private inheritance when no explicit protection keyword is present.
 # The default value is: NO.
@@ -452,7 +452,7 @@ EXTRACT_LOCAL_METHODS  = NO
 # are hidden.
 # The default value is: NO.
 
-EXTRACT_ANON_NSPACES   = NO
+EXTRACT_ANON_NSPACES   = YES
 
 # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
 # undocumented members inside documented classes or files. If set to NO these
@@ -677,7 +677,7 @@ LAYOUT_FILE            =
 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
 # the reference definitions. This must be a list of .bib files. The .bib
 # extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
+# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
 # For LaTeX the style of the bibliography can be controlled using
 # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
 # search path. Do not use file names with spaces, bibtex cannot handle them. See
@@ -754,12 +754,12 @@ WARN_LOGFILE           =
 # spaces.
 # Note: If this tag is empty the current directory is searched.
 
-INPUT                  = .
+INPUT                  = src
 
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: https://www.gnu.org/software/libiconv) for the list of
+# documentation (see: http://www.gnu.org/software/libiconv) for the list of
 # possible encodings.
 # The default value is: UTF-8.
 
@@ -805,7 +805,7 @@ EXCLUDE_SYMLINKS       = NO
 # Note that the wildcards are matched against the file with absolute path, so to
 # exclude all test directories for example use the pattern */test/*
 
-EXCLUDE_PATTERNS       = */build/* */contrib/depends/*
+EXCLUDE_PATTERNS       =
 
 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
 # (namespaces, classes, functions, etc.) that should be excluded from the
@@ -951,7 +951,7 @@ SOURCE_TOOLTIPS        = YES
 # If the USE_HTAGS tag is set to YES then the references to source code will
 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
 # source browser. The htags tool is part of GNU's global source tagging system
-# (see https://www.gnu.org/software/global/global.html). You will need version
+# (see http://www.gnu.org/software/global/global.html). You will need version
 # 4.8.6 or higher.
 #
 # To use it do the following:
@@ -1094,7 +1094,7 @@ HTML_EXTRA_FILES       =
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
 # will adjust the colors in the stylesheet and background images according to
 # this color. Hue is specified as an angle on a colorwheel, see
-# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
 # purple, and 360 is red again.
 # Minimum value: 0, maximum value: 359, default value: 220.
@@ -1152,12 +1152,12 @@ HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
 # generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: https://developer.apple.com/tools/xcode/), introduced with
+# environment (see: http://developer.apple.com/tools/xcode/), introduced with
 # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
 # Makefile in the HTML output directory. Running make will produce the docset in
 # that directory and running make install will install the docset in
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See https://developer.apple.com/tools/creatingdocsetswithdoxygen.html
+# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
 # for more information.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1197,7 +1197,7 @@ DOCSET_PUBLISHER_NAME  = Publisher
 # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
 # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
 # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
 # Windows.
 #
 # The HTML Help Workshop contains a compiler that can convert all HTML output
@@ -1273,7 +1273,7 @@ QCH_FILE               =
 
 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
-# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
+# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1281,7 +1281,7 @@ QHP_NAMESPACE          = org.doxygen.Project
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-
+# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
 # folders).
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.
@@ -1290,7 +1290,7 @@ QHP_VIRTUAL_FOLDER     = doc
 
 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
 # filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1298,7 +1298,7 @@ QHP_CUST_FILTER_NAME   =
 
 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
+# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
 # filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1306,7 +1306,7 @@ QHP_CUST_FILTER_ATTRS  =
 
 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
 # project's filter section matches. Qt Help Project / Filter Attributes (see:
-# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes).
+# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_SECT_FILTER_ATTRS  =
@@ -1411,7 +1411,7 @@ FORMULA_FONTSIZE       = 10
 FORMULA_TRANSPARENT    = YES
 
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# https://www.mathjax.org) which uses client side Javascript for the rendering
+# http://www.mathjax.org) which uses client side Javascript for the rendering
 # instead of using prerendered bitmaps. Use this if you do not have LaTeX
 # installed or if you want to formulas look prettier in the HTML output. When
 # enabled you may also need to install MathJax separately and configure the path
@@ -1423,7 +1423,7 @@ USE_MATHJAX            = NO
 
 # When MathJax is enabled you can set the default output format to be used for
 # the MathJax output. See the MathJax site (see:
-# https://docs.mathjax.org/en/latest/output.html) for more details.
+# http://docs.mathjax.org/en/latest/output.html) for more details.
 # Possible values are: HTML-CSS (which is slower, but has the best
 # compatibility), NativeMML (i.e. MathML) and SVG.
 # The default value is: HTML-CSS.
@@ -1438,11 +1438,11 @@ MATHJAX_FORMAT         = HTML-CSS
 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
 # Content Delivery Network so you can quickly see the result without installing
 # MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from https://www.mathjax.org before deployment.
-# The default value is: https://cdn.mathjax.org/mathjax/latest.
+# MathJax from http://www.mathjax.org before deployment.
+# The default value is: http://cdn.mathjax.org/mathjax/latest.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
-MATHJAX_RELPATH        = https://cdn.mathjax.org/mathjax/latest
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
 
 # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
 # extension names that should be enabled during MathJax rendering. For example
@@ -1453,7 +1453,7 @@ MATHJAX_EXTENSIONS     =
 
 # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
 # of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: https://docs.mathjax.org/en/latest/output.html) for more details. For an
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
 # example see the documentation.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
@@ -1500,7 +1500,7 @@ SERVER_BASED_SEARCH    = NO
 #
 # Doxygen ships with an example indexer ( doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/).
+# Xapian (see: http://xapian.org/).
 #
 # See the section "External Indexing and Searching" for details.
 # The default value is: NO.
@@ -1513,7 +1513,7 @@ EXTERNAL_SEARCH        = NO
 #
 # Doxygen ships with an example indexer ( doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/). See the section "External Indexing and
+# Xapian (see: http://xapian.org/). See the section "External Indexing and
 # Searching" for details.
 # This tag requires that the tag SEARCHENGINE is set to YES.
 
@@ -1552,7 +1552,7 @@ EXTRA_SEARCH_MAPPINGS  =
 # If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
 # The default value is: YES.
 
-GENERATE_LATEX         = NO
+GENERATE_LATEX         = YES
 
 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
@@ -1684,7 +1684,7 @@ LATEX_SOURCE_CODE      = NO
 
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
 # bibliography, e.g. plainnat, or ieeetr. See
-# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
 # The default value is: plain.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -2051,7 +2051,7 @@ HIDE_UNDOC_RELATIONS   = YES
 
 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
 # available from the path. This tool is part of Graphviz (see:
-# https://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
 # Bell Labs. The other options in this section have no effect if this option is
 # set to NO
 # The default value is: NO.

LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2014-2022, The Monero Project
+Copyright (c) 2014-2018, The Monero Project
 
 All rights reserved.
 
@@ -29,13 +29,3 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 Parts of the project are originally copyright (c) 2012-2013 The Cryptonote
 developers
-
-Parts of the project are originally copyright (c) 2014 The Boolberry
-developers, distributed under the MIT licence:
-
-  Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
-
-  The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
-
-  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-

Makefile

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2022, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 #
 # All rights reserved.
 #
@@ -26,153 +26,103 @@
 # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-ANDROID_STANDALONE_TOOLCHAIN_PATH ?= /usr/local/toolchain
-
-dotgit=$(shell ls -d .git/config)
-ifneq ($(dotgit), .git/config)
-  USE_SINGLE_BUILDDIR=1
-endif
-
-subbuilddir:=$(shell echo  `uname | sed -e 's|[:/\\ \(\)]|_|g'`/`git branch | grep '\* ' | cut -f2- -d' '| sed -e 's|[:/\\ \(\)]|_|g'`)
-ifeq ($(USE_SINGLE_BUILDDIR),)
-  builddir := build/"$(subbuilddir)"
-  topdir   := ../../../..
-  deldirs  := $(builddir)
-else
-  builddir := build
-  topdir   := ../..
-  deldirs  := $(builddir)/debug $(builddir)/release $(builddir)/fuzz
-endif
-
 all: release-all
 
-depends:
-	cd contrib/depends && $(MAKE) HOST=$(target) && cd ../.. && mkdir -p build/$(target)/release
-	cd build/$(target)/release && cmake -DCMAKE_TOOLCHAIN_FILE=$(CURDIR)/contrib/depends/$(target)/share/toolchain.cmake ../../.. && $(MAKE)
-
 cmake-debug:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D CMAKE_BUILD_TYPE=Debug $(topdir)
+	mkdir -p build/debug
+	cd build/debug && cmake -D CMAKE_BUILD_TYPE=Debug ../..
 
 debug: cmake-debug
-	cd $(builddir)/debug && $(MAKE)
+	cd build/debug && $(MAKE)
 
 # Temporarily disable some tests:
 #  * libwallet_api_tests fail (Issue #895)
 debug-test:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Debug $(topdir) &&  $(MAKE) && $(MAKE) ARGS="-E libwallet_api_tests" test
-
-debug-test-asan:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D SANITIZE=ON -D CMAKE_BUILD_TYPE=Debug $(topdir) &&  $(MAKE) && $(MAKE) ARGS="-E libwallet_api_tests" test
-
-debug-test-trezor:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D TREZOR_DEBUG=ON -D CMAKE_BUILD_TYPE=Debug $(topdir) &&  $(MAKE) && $(MAKE) ARGS="-E libwallet_api_tests" test
+	mkdir -p build/debug
+	cd build/debug && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Debug ../.. &&  $(MAKE) && $(MAKE) ARGS="-E libwallet_api_tests" test
 
 debug-all:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D BUILD_SHARED_LIBS=OFF -D CMAKE_BUILD_TYPE=Debug $(topdir) && $(MAKE)
+	mkdir -p build/debug
+	cd build/debug && cmake -D BUILD_TESTS=ON -D BUILD_SHARED_LIBS=OFF -D CMAKE_BUILD_TYPE=Debug ../.. && $(MAKE)
 
 debug-static-all:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D STATIC=ON -D CMAKE_BUILD_TYPE=Debug $(topdir) && $(MAKE)
+	mkdir -p build/debug
+	cd build/debug && cmake -D BUILD_TESTS=ON -D STATIC=ON -D CMAKE_BUILD_TYPE=Debug ../.. && $(MAKE)
 
-debug-static-win64:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Debug -D BUILD_TAG="win-x64" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/64-bit-toolchain.cmake -D MSYS2_FOLDER=$(shell cd ${MINGW_PREFIX}/.. && pwd -W) $(topdir) && $(MAKE)
- 
-debug-static-win32:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=Debug -D BUILD_TAG="win-x32" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/32-bit-toolchain.cmake -D MSYS2_FOLDER=$(shell cd ${MINGW_PREFIX}/.. && pwd -W) $(topdir) && $(MAKE)
- 
 cmake-release:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D CMAKE_BUILD_TYPE=Release $(topdir)
+	mkdir -p build/release
+	cd build/release && cmake -D CMAKE_BUILD_TYPE=Release ../..
 
 release: cmake-release
-	cd $(builddir)/release && $(MAKE)
+	cd build/release && $(MAKE)
 
 release-test:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Release $(topdir) && $(MAKE) && $(MAKE) test
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=release ../.. && $(MAKE) && $(MAKE) test
 
 release-all:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D USE_DEVICE_TREZOR=OFF -D CMAKE_BUILD_TYPE=Release $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D CMAKE_BUILD_TYPE=release ../.. && $(MAKE)
 
 release-static:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D USE_DEVICE_TREZOR=OFF -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release ../.. && $(MAKE)
 
 coverage:
-	mkdir -p $(builddir)/debug
-	cd $(builddir)/debug && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Debug -D COVERAGE=ON $(topdir) && $(MAKE) && $(MAKE) test
+	mkdir -p build/debug
+	cd build/debug && cmake -D BUILD_TESTS=ON -D CMAKE_BUILD_TYPE=Debug -D COVERAGE=ON ../.. && $(MAKE) && $(MAKE) test
 
 # Targets for specific prebuilt builds which will be advertised for updates by their build tag
 
 release-static-linux-armv6:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv6zk" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="linux-armv6" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv6zk" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv6" ../.. && $(MAKE)
 
 release-static-linux-armv7:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv7-a" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="linux-armv7" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv7-a" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv7" ../.. && $(MAKE)
 
-release-static-android-armv7:
-	mkdir -p $(builddir)/release/translations
-	cd $(builddir)/release/translations && cmake ../../../translations && $(MAKE)
-	cd $(builddir)/release && CC=arm-linux-androideabi-clang CXX=arm-linux-androideabi-clang++ cmake -D BUILD_TESTS=OFF -D ARCH="armv7-a" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=Release -D ANDROID=true -D BUILD_TAG="android-armv7" -D CMAKE_SYSTEM_NAME="Android" -D CMAKE_ANDROID_STANDALONE_TOOLCHAIN="${ANDROID_STANDALONE_TOOLCHAIN_PATH}" -D CMAKE_ANDROID_ARM_MODE=ON -D CMAKE_ANDROID_ARCH_ABI="armeabi-v7a" ../.. && $(MAKE)
-
-release-static-android-armv8:
-	mkdir -p $(builddir)/release/translations
-	cd $(builddir)/release/translations && cmake ../../../translations && $(MAKE)
-	cd $(builddir)/release && CC=aarch64-linux-android-clang CXX=aarch64-linux-android-clang++ cmake -D BUILD_TESTS=OFF -D ARCH="armv8-a" -D STATIC=ON -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release -D ANDROID=true -D BUILD_TAG="android-armv8" -D CMAKE_SYSTEM_NAME="Android" -D CMAKE_ANDROID_STANDALONE_TOOLCHAIN="${ANDROID_STANDALONE_TOOLCHAIN_PATH}" -D CMAKE_ANDROID_ARCH_ABI="arm64-v8a" ../.. && $(MAKE)
+release-static-android:
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv7-a" -D STATIC=ON -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D ANDROID=true -D INSTALL_VENDORED_LIBUNBOUND=ON -D BUILD_TAG="android" ../.. && $(MAKE)
 
 release-static-linux-armv8:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv8-a" -D STATIC=ON -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="linux-armv8" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF -D ARCH="armv8-a" -D STATIC=ON -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-armv8" ../.. && $(MAKE)
 
 release-static-linux-x86_64:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="linux-x64" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D BUILD_TESTS=OFF STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-x64" ../.. && $(MAKE)
 
 release-static-freebsd-x86_64:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="freebsd-x64" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="freebsd-x64" ../.. && $(MAKE)
 
 release-static-mac-x86_64:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="mac-x64" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="mac-x64" ../.. && $(MAKE)
 
 release-static-linux-i686:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="linux-x86" $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=release -D BUILD_TAG="linux-x86" ../.. && $(MAKE)
 
 release-static-win64:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="win-x64" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/64-bit-toolchain.cmake -D MSYS2_FOLDER=$(shell cd ${MINGW_PREFIX}/.. && pwd -W) $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="x86-64" -D BUILD_64=ON -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="win-x64" -D CMAKE_TOOLCHAIN_FILE=../../cmake/64-bit-toolchain.cmake -D MSYS2_FOLDER=c:/msys64 ../.. && $(MAKE)
 
 release-static-win32:
-	mkdir -p $(builddir)/release
-	cd $(builddir)/release && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="win-x32" -D CMAKE_TOOLCHAIN_FILE=$(topdir)/cmake/32-bit-toolchain.cmake -D MSYS2_FOLDER=$(shell cd ${MINGW_PREFIX}/.. && pwd -W) $(topdir) && $(MAKE)
+	mkdir -p build/release
+	cd build/release && cmake -G "MSYS Makefiles" -D STATIC=ON -D ARCH="i686" -D BUILD_64=OFF -D CMAKE_BUILD_TYPE=Release -D BUILD_TAG="win-x32" -D CMAKE_TOOLCHAIN_FILE=../../cmake/32-bit-toolchain.cmake -D MSYS2_FOLDER=c:/msys32 ../.. && $(MAKE)
 
 fuzz:
-	mkdir -p $(builddir)/fuzz
-	cd $(builddir)/fuzz && cmake -D STATIC=ON -D SANITIZE=ON -D BUILD_TESTS=ON -D USE_LTO=OFF -D CMAKE_C_COMPILER=afl-gcc -D CMAKE_CXX_COMPILER=afl-g++ -D ARCH="x86-64" -D CMAKE_BUILD_TYPE=fuzz -D BUILD_TAG="linux-x64" $(topdir) && $(MAKE)
+	mkdir -p build/fuzz
+	cd build/fuzz && cmake -D STATIC=ON -D SANITIZE=ON -D BUILD_TESTS=ON -D USE_LTO=OFF -D CMAKE_C_COMPILER=afl-gcc -D CMAKE_CXX_COMPILER=afl-g++ -D ARCH="x86-64" -D CMAKE_BUILD_TYPE=fuzz -D BUILD_TAG="linux-x64" ../.. && $(MAKE)
 
 clean:
-	@echo "WARNING: Back-up your wallet if it exists within ./"$(deldirs)"!" ; \
-    read -r -p "This will destroy the build directory, continue (y/N)?: " CONTINUE; \
-	[ $$CONTINUE = "y" ] || [ $$CONTINUE = "Y" ] || (echo "Exiting."; exit 1;)
-	rm -rf $(deldirs)
-
-clean-all:
 	@echo "WARNING: Back-up your wallet if it exists within ./build!" ; \
-	read -r -p "This will destroy all build directories, continue (y/N)?: " CONTINUE; \
+        read -r -p "This will destroy the build directory, continue (y/N)?: " CONTINUE; \
 	[ $$CONTINUE = "y" ] || [ $$CONTINUE = "Y" ] || (echo "Exiting."; exit 1;)
-	rm -rf ./build
+	rm -rf build
 
 tags:
 	ctags -R --sort=1 --c++-kinds=+p --fields=+iaS --extra=+q --language-force=C++ src contrib tests/gtest

README.i18n.md

@@ -0,0 +1,44 @@
+Wownero daemon internationalization
+==================================
+
+The Wownero command line tools can be translated in various languages. If you wish to contribute and need help/support, come chat on `#wownero` (Freenode/IRC)
+
+In order to use the same translation workflow as the [Wownero GUI](https://github.com/wownero/wownero-gui), they use Qt Linguist translation files.  However, to avoid the dependencies on Qt this normally implies, they use a custom loader to read those files at runtime.
+
+### Tools for translators
+
+In order to create, update or build translations files, you need to have Qt tools installed. For translating, you need either the **Qt Linguist GUI** ([part of QT Creator](https://www.qt.io/download-open-source/#allDownloadsDiv-9) or a [3rd-party standalone version](https://github.com/lelegard/qtlinguist-installers/releases)), or another tool that supports Qt ts files, such as Transifex.  The files are XML, so they can be edited in any plain text editor if needed.
+
+### Creating / modifying translations
+
+You do not need anything from Qt in order to use the final translations.
+
+To update ts files after changing source code:
+
+    ./utils/translations/update-translations.sh
+
+To add a new language, eg Spanish (ISO code es):
+
+    cp translations/wownero.ts translations/wownero_es.ts
+
+To edit translations for Spanish:
+
+    linguist translations/wownero_es.ts
+
+To build translations after modifying them:
+
+    ./utils/translations/build-translations.sh
+
+To test a translation:
+
+    LANG=es ./build/release/bin/wownero-wallet-cli
+
+To add new translatable strings in the source code:
+
+Use the `tr(string)` function if possible. If the code is in a class, and this class doesn't already have a `tr()` static function, add one, which uses a context named after what `lupdate` uses for the context, usually the fully qualified class name (eg, `cryptonote::simple_wallet`).  If you need to use `tr()` in code that's not in a class, you can use the fully qualified version (eg, `simple_wallet::tr`) of the one matching the context you want. Use `QT_TRANSLATE_NOOP(string)` if you want to specify a context manually.
+
+If you're getting messages of the form:
+
+    Class 'cryptonote::simple_wallet' lacks Q_OBJECT macro
+
+all is fine, we don't actually need that here.

README.md

@@ -1,157 +1,362 @@
-# ~~Mo~~Wownero -  Such privacy! Many coins! Wow! 🐕
+# ~~Mo~~Wownero
 
-Copyright (c) 2014-2023 The Monero Project.   
+Copyright (c) 2014-2018 The Monero Project.   
 Portions Copyright (c) 2012-2013 The Cryptonote developers.
 
 ## Resources
 
-- IRC: [OFTC #wownero](https://webchat.oftc.net/?channels=wownero)
-- Web: [wownero.org](https://wownero.org)
+- Web: [wownero.org](http://wownero.org)
 - Twitter: [@w0wn3r0](https://twitter.com/w0wn3r0)
+- Discord: [discord.gg/sQt74ep](https://discord.gg/sQt74ep)
 - Reddit: [/r/wownero](https://www.reddit.com/r/wownero)
-- Mail: [wownero@wownero.org](mailto:wownero@wownero.org)
-- Git: [git.wownero.com/wownero/wownero](https://git.wownero.com/wownero/wownero)
-- Wownero Funding System: [funding.wownero.com](https://funding.wownero.com)
-- Wownero Forum: [forum.wownero.com](https://forum.wownero.com)
-- Discord: [discord.gg/ykZyAzJhDK](https://discord.com/invite/ykZyAzJhDK)
-- Telegram: [t.me/wownero](https://t.me/wownero)
-- Wowlet Desktop Wallet: [git.wownero.com/wowlet/wowlet](https://git.wownero.com/wowlet/wowlet/releases)
-- Stack Wallet iOS & Android Mobile Wallet: [stackwallet.com](https://stackwallet.com)
-- Wonerujo Android Mobile Wallet: [google store](https://play.google.com/store/apps/details?id=com.m2049r.wowwallet)
-- Elite Wallet Android Mobile Wallet: [github](https://github.com/Elite-Labs/EliteWallet)
-- Public Node Status: [monero.fail](https://monero.fail/?crypto=wownero)
-- Wownero Memes: [suchwow.xyz](https://suchwow.xyz/posts/top)
-- Market Info: [coinmarketcap.com](https://coinmarketcap.com/currencies/wownero), [coingecko.com](https://www.coingecko.com/en/coins/wownero/usd)
+- Mail: [wownero@protonmail.com](mailto:wownero@protonmail.com)
+- GitHub: [https://github.com/wownero/wownero](https://github.com/wownero/wownero)
+- IRC: [#wownero on Freenode](https://kiwiirc.com/client/irc.freenode.net/?nick=suchchatter|?#wownero)
 
-## Exchanges
+## Vulnerability response
 
-- [AltQuick](https://altquick.com/market/Wownero)
-- [Majestic Bank](https://majesticbank.sc)
-- [TradeOgre](https://tradeogre.com/exchange/BTC-WOW)
+- TODO
 
-### Blockchain Explorers
+## Build
 
-- https://explore.wownero.com
-- https://muchwow.lol
+| Operating System      | Processor | Status |
+| --------------------- | -------- |--------|
+| Ubuntu 16.04          |  i686    | TODO
+| Ubuntu 16.04          |  amd64   | TODO
+| Ubuntu 16.04          |  armv7   | TODO
+| Debian Stable         |  armv8   | TODO
+| OSX 10.10             |  amd64   | TODO
+| OSX 10.11             |  amd64   | TODO
+| OSX 10.12             |  amd64   | TODO
+| FreeBSD 11            |  amd64   | TODO
+| DragonFly BSD 4.6     |  amd64   | TODO
+| Windows (MSYS2/MinGW) |  i686    | TODO
+| Windows (MSYS2/MinGW) |  amd64   | TODO
+
+## Coverage
+
+| Type      | Status |
+|-----------|--------|
+| License   | [![License](https://img.shields.io/badge/license-BSD3-blue.svg)](https://opensource.org/licenses/BSD-3-Clause)
 
 ## Introduction
 
-Wownero is a privacy-centric memecoin that was fairly launched on April 1, 2018 with no pre-mine, stealth-mine or ICO. Wownero has a maximum supply of around 184 million WOW with a slow and steady emission over 50 years. It is a fork of Monero, but with its own genesis block, so there is no degradation of privacy due to ring signatures using different participants for the same tx outputs on opposing forks.
+Wownero is a fork of the private cryptocurrenty Monero with two major changes: A capped emmision that disallows infinite coin creation 10x the coin for 10x the W0W; Wownero is a fairly launched coin with no premine. It's not a fork of another blockchain. With its own genesis block there is no degradation of privacy due to ring signatures using different participants for the same tx outputs on opposing forks.
+
+**Privacy:** Wownero uses a cryptographically sound system to allow you to send and receive funds without your transactions being easily revealed on the blockchain (the ledger of transactions that everyone has). This ensures that your purchases, receipts, and all transfers remain absolutely private by default.
+
+**Security:** Using the power of a distributed peer-to-peer consensus network, every transaction on the network is cryptographically secured. Individual wallets have a 25 word mnemonic seed that is only displayed once, and can be written down to backup the wallet. Wallet files are encrypted with a passphrase to ensure they are useless if stolen.
+
+**Untraceability:** By taking advantage of ring signatures, a special property of a certain type of cryptography, Wownero is able to ensure that transactions are not only untraceable, but have an optional measure of ambiguity that ensures that transactions cannot easily be tied back to an individual user or computer.
+
+## About this project
+
+This is the core implementation of Wownero. It is open source and completely free to use without restrictions, except for those specified in the license agreement below. There are no restrictions on anyone creating an alternative implementation of Wownero that uses the protocol and network in a compatible manner.
+
+As with many development projects, the repository on Github is considered to be the "staging" area for the latest changes. Before changes are merged into that branch on the main repository, they are tested by individual developers in their own branches, submitted as a pull request, and then subsequently tested by contributors who focus on testing and code reviews. That having been said, the repository should be carefully considered before using it in a production environment, unless there is a patch in the repository for a particular show-stopping issue you are experiencing. It is generally a better idea to use a tagged release for stability.
+
+**Anyone is welcome to contribute to Wownero's codebase!** If you have a fix or code change, feel free to submit it as a pull request directly to the "master" branch. In cases where the change is relatively small or does not affect other parts of the codebase it may be merged in immediately by any one of the collaborators. On the other hand, if the change is particularly large or complex, it is expected that it will be discussed at length either well in advance of the pull request being submitted, or even directly on the pull request. All pull requests will be considered safe until the US dollar valuation of 1 Wownero equals $1000. After this valuation has been reached, more reseach will be needed to introduce experimental cryptography and/or code into the codebase.  
 
 ## Supporting the project
 
-Wownero is a 100% community-sponsored endeavor. Supporting services are also graciously provided by sponsors:
+Wownero is a 100% community-sponsored endeavor. If you want to join our efforts, the easiest thing you can do is support the project financially.
 
-[<img src="https://git.wownero.com/wownero/meta/raw/branch/master/images/macstadium.png"
-alt="MacStadium"
-height="100">](https://www.macstadium.com)
-[<img src="https://git.wownero.com/wownero/meta/raw/branch/master/images/jetbrains.png"
-alt="JetBrains"
-height="100">](https://www.jetbrains.com)
+The Wownero donation address (mostly reserved for hookers and blow) is: `Wo3MWeKwtA918DU4c69hVSNgejdWFCRCuWjShRY66mJkU2Hv58eygJWDJS1MNa2Ge5M1WjUkGHuLqHkweDxwZZU42d16v94mP`
 
-Developers are volunteers doing this mostly for shits and giggles. If you would like to support our shenanigans and stimulant addictions, please consider donating to [WFS proposals](https://funding.wownero.com/proposals) or the dev slush fund.
+The Monero donation address is: `44AFFq5kSiGBoZ4NMDwYtN18obc8AemS33DBLWs3H7otXft3XjrpDtQGv7SqSsaBYBb98uNbr2VBBEt7f2wfn3RVGQBEP3A` (viewkey: `f359631075708155cc3d92a32b75a7d02a5dcf27756707b47a2b31b21c389501`)
 
-### Donation Addresses
+The Monero Bitcoin donation address is: `1KTexdemPdxSBcG55heUuTjDRYqbC5ZL8H`
 
-WOW: `Wo3MWeKwtA918DU4c69hVSNgejdWFCRCuWjShRY66mJkU2Hv58eygJWDJS1MNa2Ge5M1WjUkGHuLqHkweDxwZZU42d16v94mP`
+Core development funding and/or some supporting services are also graciously provided by sponsors:
 
-- view key: `e62e40bfd5ca7e3a7f199602a3c97df511780489e1c1861884b00c28abaea406`
+<img width="100" src="https://botw-pd.s3.amazonaws.com/styles/logo-thumbnail/s3/0024/1083/brand.gif"/><img width="100" src="https://blogvecindad.com/imagenes/2007/02/brawndo.jpg"/><img width="100" src="https://www.subscribepro.com/wp-content/uploads/2016/04/logo-depend-250x130.png"/>
 
-XMR: `44SQVPGLufPasUcuUQSZiF5c9BFzjcP8ucDxzzFDgLf1VkCEFaidJ3u2AhSKMhPLKA3jc2iS8wQHFcaigM6fXmo6AnFRn5B`
+## License
 
-- view key: `cb83681c31db0c79adf18f25b2a6d05f86db1109385b4928930e2acf49a3ed0b`
+See [LICENSE](LICENSE).
 
-BTC: `bc1qcw9zglp3fxyl25zswemw7jczlqryms2lsmu464`
+## Contributing
 
-### Open Collective
+If you want to help out, see [CONTRIBUTING](CONTRIBUTING.md) for a set of guidelines.
 
-Open Collective is an online funding platform for open source software and collaborative communities. The platform brings together legal entities that act as a “Fiscal Host”, “Collectives” (unincorporated, community-based projects), and individuals interested in supporting projects with donations. Fiscal hosts hold donations for collectives in trust and handle all the taxes and legal stuff.
+## Scheduled mandatory software upgrades
 
-Wownero is hosted by Open Collective Europe, a Brussels-based non-profit that hosts many other collectives, such as Manjaro, EndeavourOS, Xfce, and peertube.social. If you would like donate to the Wownero Project using this method, you can check out our [Wownero - Open Collective](https://opencollective.com/wownero) page.
+Wownero uses a fixed-schedule mandatory software upgrade (hard fork) mechanism to implement new features. This means that users of Wownero (end users and service providers) need to run current versions and upgrade their software on a regular schedule.The required software for these upgrades will be available prior to the scheduled date. Please check the repository prior to this date for the proper Wownero software version. Below is the historical schedule and the projected schedule for the next upgrade.
+Dates are provided in the format YYYY-MM-DD. 
 
-## Release staging and Contributing
 
-**Anyone is welcome to contribute to Wownero's codebase!**
-
-If you have a fix or code change, feel free to submit it as a pull request. Ahead of a scheduled software upgrade, a development branch will be created with the new release version tag. Pull requests that address bugs should be made to Master. Pull requests that require review and testing (generally, optimizations and new features) should be made to the development branch. All pull requests will be considered safe until the US dollar valuation of 1 Wownero equals $1000. After this valuation has been reached, more research will be needed to introduce experimental cryptography and/or code into the codebase.
-
-Things to Do, Work in Progress, and Help Wanted tasks are tracked in the [Meta](https://git.wownero.com/wownero/meta/issues) repo.
-
-Join `#wownero` on IRC OFTC to participate in development conversation.
-
-## Scheduled software upgrades
-
-Wownero uses a fixed-schedule software upgrade (hard fork) mechanism to implement new features. This means that users of Wownero (end users and service providers) should run current versions and upgrade their software on a regular schedule. The required software for these upgrades will be available prior to the scheduled date. Please check the repository prior to this date for the proper Wownero software version. Below is the historical schedule and the projected schedule for the next upgrade.
-Dates are provided in the format YYYY-MM-DD.
-
-| Software upgrade block height | Date       | Release Name | Minimum Wownero version | Recommended Wownero version | Details                                                                            |  
-|-------------------------------|------------| ----------------- |-------------------------|-----------------------------| ---------------------------------------------------------------------------------- |
-| 1                             | 2018-04-01 | Awesome Akita                | v0.1.0.0                | v0.1.0.0                    | Cryptonight variant 1, ringsize >= 8, sorted inputs
-| 69,69                         | 2018-04-24 | Busty Brazzers                | v0.2.0.0                | v0.2.0.0                    | Bulletproofs, LWMA difficulty algorithm, ringsize >= 10, reduce unlock to 4
-| 53,666                        | 2018-10-06 | Cool Cage                | v0.3.0.0                | v0.3.1.3                    | Cryptonight variant 2, LWMA v2, ringsize = 22, MMS
-| 63,469                        | 2018-11-11 | Dank Doge               | v0.4.0.0                | v0.4.0.0                    | LWMA v4
-| 81,769                        | 2019-02-19 | Erotic EggplantEmoji    | v0.5.0.0                | v0.5.0.2                    | Cryptonight/wow, LWMA v1 with N=144, Updated Bulletproofs, Fee Per Byte, Auto-churn
-| 114,969                       | 2019-06-14 | F For Fappening    | v0.6.1.0                | v0.6.1.2                    | RandomWOW, new block weight algorithm, slightly more efficient RingCT format
-| 160,777                       | 2019-11-20 | Gaping Goatse    | v0.7.0.0                | v0.7.1.0                    | Only allow >= 2 outputs, change to the block median used to calculate penalty, rct sigs in coinbase forbidden, 4 unlock time as protocol rule
-| -                             | 2020-06-28 | Hallucinogenic Hypnotoad  | v0.8.0.0                | v0.8.0.2                    | Dandelion++ support
-| 253,999                       | 2020-10-09 | Illiterate Illuminati  | v0.9.0.0                | v0.9.3.3                    | Dynamic coinbase unlock (up to 1 mo.), Deterministic unlock times, Enforce maximum coinbase amount, show_qr_code wallet command, CLSAG
-| 331,170                       | 2021-07-04 | Junkie Jeff  | v0.10.0.0               | v0.10.2.0                   | Bulletproofs+, Miner Block Header Signing, Vote by Block, Change coinbase unlock time to 1 day, Reset difficulty and switch back to Monero's difficulty algorithm
-| 514,000                       | 2023-04-01 | Kunty Karen  | v0.11.0.0               | v0.11.1.0                   | View tags, fee changes, adjusted dynamic block weight algorithm, multisig security fixes, RPC broadcast node donation sub-address, Limit tx_extra max size to ~1kb, 12-hour difficulty adjustment window
+| Software upgrade block height | Date       | Fork version | Minimum Wownero version | Recommended Wownero version | Details                                                                            |  
+| ------------------------------ | -----------| ----------------- | ---------------------- | -------------------------- | ---------------------------------------------------------------------------------- |
+| 1                              | 2018-04-01 | v7                | v0.1.0.0               | v0.1.0.0                  | Cryptonight variant 1, ringsize >= 8, sorted inputs
+| 6969                           | 2018-04-24 | v8                | v0.2.0.0               | v0.2.0.0                  | Bulletproofs, LWMA difficulty algorithm, ringsize >= 10, reduce unlock to 4
 
 X's indicate that these details have not been determined as of commit date.
 
-\* indicates estimate as of commit date
+## Release staging schedule and protocol
 
-## Installing from a package
+Approximately three months prior to a scheduled mandatory software upgrade, a branch from Master will be created with the new release version tag. Pull requests that address bugs should then be made to both Master and the new release branch. Pull requests that require extensive review and testing (generally, optimizations and new features) should *not* be made to the release branch. 
 
-Packages are available for
+## Compiling Wownero from source
 
-* Arch Linux/Manjaro
+### Dependencies
 
-        yay -S wownero-git
+The following table summarizes the tools and libraries required to build. A
+few of the libraries are also included in this repository (marked as
+"Vendored"). By default, the build uses the library installed on the system,
+and ignores the vendored sources. However, if no library is found installed on
+the system, then the vendored source will be built and used. The vendored
+sources are also used for statically-linked builds because distribution
+packages often include only shared library binaries (`.so`) but not static
+library archives (`.a`).
 
-* Gentoo - Russian hacking tool
-
-        emerge --noreplace eselect-repository
-        eselect repository enable monero
-        emaint sync -r monero
-        echo '*/*::monero ~amd64' >> /etc/portage/package.accept_keywords
-        emerge net-p2p/wownero
-
-* NixOS
-
-        nix-shell -p wownero
-
-Packaging for your favorite distribution would be a welcome contribution!
-
-**DISCLAIMER: These packages are not part of this repository, and as such, do not go through the same review process to ensure their trustworthiness and security.**
+| Dep          | Min. version  | Vendored | Debian/Ubuntu pkg  | Arch pkg     | Fedora            | Optional | Purpose        |
+| ------------ | ------------- | -------- | ------------------ | ------------ | ----------------- | -------- | -------------- |
+| GCC          | 4.7.3         | NO       | `build-essential`  | `base-devel` | `gcc`             | NO       |                |
+| CMake        | 3.0.0         | NO       | `cmake`            | `cmake`      | `cmake`           | NO       |                |
+| pkg-config   | any           | NO       | `pkg-config`       | `base-devel` | `pkgconf`         | NO       |                |
+| Boost        | 1.58          | NO       | `libboost-all-dev` | `boost`      | `boost-devel`     | NO       | C++ libraries  |
+| OpenSSL      | basically any | NO       | `libssl-dev`       | `openssl`    | `openssl-devel`   | NO       | sha256 sum     |
+| libzmq       | 3.0.0         | NO       | `libzmq3-dev`      | `zeromq`     | `cppzmq-devel`    | NO       | ZeroMQ library |
+| libunbound   | 1.4.16        | YES      | `libunbound-dev`   | `unbound`    | `unbound-devel`   | NO       | DNS resolver   |
+| libsodium    | ?             | NO       | `libsodium-dev`    | ?            | `libsodium-devel` | NO       | libsodium      |
+| libminiupnpc | 2.0           | YES      | `libminiupnpc-dev` | `miniupnpc`  | `miniupnpc-devel` | YES      | NAT punching   |
+| libunwind    | any           | NO       | `libunwind8-dev`   | `libunwind`  | `libunwind-devel` | YES      | Stack traces   |
+| liblzma      | any           | NO       | `liblzma-dev`      | `xz`         | `xz-devel`        | YES      | For libunwind  |
+| libreadline  | 6.3.0         | NO       | `libreadline6-dev` | `readline`   | `readline-devel`  | YES      | Input editing  |
+| ldns         | 1.6.17        | NO       | `libldns-dev`      | `ldns`       | `ldns-devel`      | YES      | SSL toolkit    |
+| expat        | 1.1           | NO       | `libexpat1-dev`    | `expat`      | `expat-devel`     | YES      | XML parsing    |
+| GTest        | 1.5           | YES      | `libgtest-dev`^    | `gtest`      | `gtest-devel`     | YES      | Test suite     |
+| Doxygen      | any           | NO       | `doxygen`          | `doxygen`    | `doxygen`         | YES      | Documentation  |
+| Graphviz     | any           | NO       | `graphviz`         | `graphviz`   | `graphviz`        | YES      | Documentation  |
 
 
-## Building from Source
+[^] On Debian/Ubuntu `libgtest-dev` only includes sources and headers. You must
+build the library binary manually. This can be done with the following command ```sudo apt-get install libgtest-dev && cd /usr/src/gtest && sudo cmake . && sudo make && sudo mv libg* /usr/lib/ ```
 
-* Docker
+### Cloning the repository
 
-        git clone https://git.wownero.com/wownero/wownero && cd wownero
-        docker build -t git-wow:master -m 4g .
-        docker run -it -p 34567:34567 -p 34568:34568 -w /home/wownero/build/release/bin git-wow:master bash
+`$ git clone https://github.com/wownero/wownero`
 
-* Arch Linux/Manjaro
+Submodules are fetched and updated automatically. If you wish to
+do this manually, run CMake flag `-DMANUAL_SUBMODULES=ON` to opt out.
 
-        sudo pacman -Syu && sudo pacman -S base-devel cmake boost openssl zeromq libpgm unbound libsodium git libusb systemd
-        git clone https://git.wownero.com/wownero/wownero && cd wownero
-        make -j2
+### Build instructions
 
-* Debian/Ubuntu
+Wownero uses the CMake build system and a top-level [Makefile](Makefile) that
+invokes cmake commands as needed.
 
-        sudo apt update && sudo apt install build-essential cmake pkg-config libboost-all-dev libssl-dev libzmq3-dev libunbound-dev libsodium-dev libunwind8-dev liblzma-dev libreadline6-dev libldns-dev libexpat1-dev libpgm-dev libhidapi-dev libusb-1.0-0-dev libprotobuf-dev protobuf-compiler libudev-dev git -y
-        git clone https://git.wownero.com/wownero/wownero && cd wownero
-        make -j2
+#### On Linux and OS X
+
+* Install the dependencies
+* Change to the root of the source code directory and build:
+
+        cd wownero
+        make
+
+    *Optional*: If your machine has several cores and enough memory, enable
+    parallel build by running `make -j<number of threads>` instead of `make`. For
+    this to be worthwhile, the machine should have one core and about 2GB of RAM
+    available per thread.
+
+    *Note*: If cmake can not find zmq.hpp file on OS X, installing `zmq.hpp` from
+    https://github.com/zeromq/cppzmq to `/usr/local/include` should fix that error.
+
+* The resulting executables can be found in `build/release/bin`
+
+* Add `PATH="$PATH:$HOME/wownero/build/release/bin"` to `.profile`
+
+* Run Wownero with `wownerod --detach`
+
+* **Optional**: build and run the test suite to verify the binaries:
+
+        make release-test
+
+    *NOTE*: `core_tests` test may take a few hours to complete.
+
+* **Optional**: to build binaries suitable for debugging:
+
+         make debug
+
+* **Optional**: to build statically-linked binaries:
+
+         make release-static
+
+Dependencies need to be built with -fPIC. Static libraries usually aren't, so you may have to build them yourself with -fPIC. Refer to their documentation for how to build them.
+
+* **Optional**: build documentation in `doc/html` (omit `HAVE_DOT=YES` if `graphviz` is not installed):
+
+        HAVE_DOT=YES doxygen Doxyfile
+
+#### On Windows:
+
+Binaries for Windows are built on Windows using the MinGW toolchain within
+[MSYS2 environment](http://msys2.github.io). The MSYS2 environment emulates a
+POSIX system. The toolchain runs within the environment and *cross-compiles*
+binaries that can run outside of the environment as a regular Windows
+application.
+
+**Preparing the build environment**
+
+* Download and install the [MSYS2 installer](http://msys2.github.io), either the 64-bit or the 32-bit package, depending on your system.
+* Open the MSYS shell via the `MSYS2 Shell` shortcut
+* Update packages using pacman:  
+
+        pacman -Syuu  
+
+* Exit the MSYS shell using Alt+F4  
+* Edit the properties for the `MSYS2 Shell` shortcut changing "msys2_shell.bat" to "msys2_shell.cmd -mingw64" for 64-bit builds or "msys2_shell.cmd -mingw32" for 32-bit builds
+* Restart MSYS shell via modified shortcut and update packages again using pacman:  
+
+        pacman -Syuu  
 
 
-## Running Binaries
+* Install dependencies:
+
+    To build for 64-bit Windows:
+
+        pacman -S mingw-w64-x86_64-toolchain make mingw-w64-x86_64-cmake mingw-w64-x86_64-boost mingw-w64-x86_64-openssl mingw-w64-x86_64-zeromq mingw-w64-x86_64-libsodium
+
+    To build for 32-bit Windows:
+ 
+        pacman -S mingw-w64-i686-toolchain make mingw-w64-i686-cmake mingw-w64-i686-boost mingw-w64-i686-openssl mingw-w64-i686-zeromq mingw-w64-i686-libsodium
+
+* Open the MingW shell via `MinGW-w64-Win64 Shell` shortcut on 64-bit Windows
+  or `MinGW-w64-Win64 Shell` shortcut on 32-bit Windows. Note that if you are
+  running 64-bit Windows, you will have both 64-bit and 32-bit MinGW shells.
+
+**Building**
+
+* If you are on a 64-bit system, run:
+
+        make release-static-win64
+
+* If you are on a 32-bit system, run:
+
+        make release-static-win32
+
+* The resulting executables can be found in `build/release/bin`
+
+### On FreeBSD:
+
+The project can be built from scratch by following instructions for Linux above. If you are running wownero in a jail you need to add the flag: `allow.sysvipc=1` to your jail configuration, otherwise lmdb will throw the error message: `Failed to open lmdb environment: Function not implemented`.
+
+### On OpenBSD:
+
+#### OpenBSD < 6.2
+
+This has been tested on OpenBSD 5.8.
+
+You will need to add a few packages to your system. `pkg_add db cmake gcc gcc-libs g++ miniupnpc gtest`.
+
+The doxygen and graphviz packages are optional and require the xbase set.
+
+The Boost package has a bug that will prevent librpc.a from building correctly. In order to fix this, you will have to Build boost yourself from scratch. Follow the directions here (under "Building Boost"):
+https://github.com/bitcoin/bitcoin/blob/master/doc/build-openbsd.md
+
+You will have to add the serialization, date_time, and regex modules to Boost when building as they are needed by Wownero.
+
+To build: `env CC=egcc CXX=eg++ CPP=ecpp DEVELOPER_LOCAL_TOOLS=1 BOOST_ROOT=/path/to/the/boost/you/built make release-static-64`
+
+#### OpenBSD >= 6.2
+
+You will need to add a few packages to your system. `pkg_add cmake miniupnpc zeromq libiconv`.
+
+The doxygen and graphviz packages are optional and require the xbase set.
+
+
+Build the Boost library using clang. This guide is derived from: https://github.com/bitcoin/bitcoin/blob/master/doc/build-openbsd.md
+
+We assume you are compiling with a non-root user and you have `doas` enabled.
+
+Note: do not use the boost package provided by OpenBSD, as we are installing boost to `/usr/local`.
+
+```
+# Create boost building directory
+mkdir ~/boost
+cd ~/boost
+
+# Fetch boost source
+ftp -o boost_1_64_0.tar.bz2 https://netcologne.dl.sourceforge.net/project/boost/boost/1.64.0/boost_1_64_0.tar.bz2 
+
+# MUST output: (SHA256) boost_1_64_0.tar.bz2: OK
+echo "7bcc5caace97baa948931d712ea5f37038dbb1c5d89b43ad4def4ed7cb683332 boost_1_64_0.tar.bz2" | sha256 -c
+tar xfj boost_1_64_0.tar.bz2
+
+# Fetch and apply boost patches, required for OpenBSD
+ftp -o boost_test_impl_execution_monitor_ipp.patch https://raw.githubusercontent.com/openbsd/ports/bee9e6df517077a7269ff0dfd57995f5c6a10379/devel/boost/patches/patch-boost_test_impl_execution_monitor_ipp
+ftp -o boost_config_platform_bsd_hpp.patch https://raw.githubusercontent.com/openbsd/ports/90658284fb786f5a60dd9d6e8d14500c167bdaa0/devel/boost/patches/patch-boost_config_platform_bsd_hpp
+
+# MUST output: (SHA256) boost_config_platform_bsd_hpp.patch: OK
+echo "1f5e59d1154f16ee1e0cc169395f30d5e7d22a5bd9f86358f738b0ccaea5e51d boost_config_platform_bsd_hpp.patch" | sha256 -c
+# MUST output: (SHA256) boost_test_impl_execution_monitor_ipp.patch: OK
+echo "30cec182a1437d40c3e0bd9a866ab5ddc1400a56185b7e671bb3782634ed0206 boost_test_impl_execution_monitor_ipp.patch" | sha256 -c
+
+cd boost_1_64_0
+patch -p0 < ../boost_test_impl_execution_monitor_ipp.patch
+patch -p0 < ../boost_config_platform_bsd_hpp.patch
+
+# Start building boost
+echo 'using clang : : c++ : <cxxflags>"-fvisibility=hidden -fPIC" <linkflags>"" <archiver>"ar" <striper>"strip"  <ranlib>"ranlib" <rc>"" : ;' > user-config.jam
+./bootstrap.sh --without-icu --with-libraries=chrono,filesystem,program_options,system,thread,test,date_time,regex,serialization,locale --with-toolset=clang
+./b2 toolset=clang cxxflags="-stdlib=libc++" linkflags="-stdlib=libc++" -sICONV_PATH=/usr/local
+doas ./b2 -d0 runtime-link=shared threadapi=pthread threading=multi link=static variant=release --layout=tagged --build-type=complete --user-config=user-config.jam -sNO_BZIP2=1 -sICONV_PATH=/usr/local --prefix=/usr/local install
+```
+
+Build cppzmq
+
+Build the cppzmq bindings.
+
+We assume you are compiling with a non-root user and you have `doas` enabled.
+
+```
+# Create cppzmq building directory
+mkdir ~/cppzmq
+cd ~/cppzmq
+
+# Fetch cppzmq source
+ftp -o cppzmq-4.2.3.tar.gz https://github.com/zeromq/cppzmq/archive/v4.2.3.tar.gz
+
+# MUST output: (SHA256) cppzmq-4.2.3.tar.gz: OK
+echo "3e6b57bf49115f4ae893b1ff7848ead7267013087dc7be1ab27636a97144d373 cppzmq-4.2.3.tar.gz" | sha256 -c
+tar xfz cppzmq-4.2.3.tar.gz
+
+# Start building cppzmq
+cd cppzmq-4.2.3
+mkdir build
+cd build
+cmake ..
+doas make install
+```
+
+Build wownero: `env DEVELOPER_LOCAL_TOOLS=1 BOOST_ROOT=/usr/local make release-static`
+
+### On Solaris:
+
+The default Solaris linker can't be used, you have to install GNU ld, then run cmake manually with the path to your copy of GNU ld:
+
+        mkdir -p build/release
+        cd build/release
+        cmake -DCMAKE_LINKER=/path/to/ld -D CMAKE_BUILD_TYPE=Release ../..
+        cd ../..
+
+Then you can run make as usual.
+
+### Building portable statically linked binaries
+
+By default, in either dynamically or statically linked builds, binaries target the specific host processor on which the build happens and are not portable to other processors. Portable binaries can be built using the following targets:
+
+* ```make release-static-linux-x86_64``` builds binaries on Linux on x86_64 portable across POSIX systems on x86_64 processors
+* ```make release-static-linux-i686``` builds binaries on Linux on x86_64 or i686 portable across POSIX systems on i686 processors
+* ```make release-static-linux-armv8``` builds binaries on Linux portable across POSIX systems on armv8 processors
+* ```make release-static-linux-armv7``` builds binaries on Linux portable across POSIX systems on armv7 processors
+* ```make release-static-linux-armv6``` builds binaries on Linux portable across POSIX systems on armv6 processors
+* ```make release-static-win64``` builds binaries on 64-bit Windows portable across 64-bit Windows systems
+* ```make release-static-win32``` builds binaries on 64-bit or 32-bit Windows portable across 32-bit Windows systems
+
+## Running wownerod
 
 The build places the binary in `bin/` sub-directory within the build directory
-from which cmake was invoked (repository root by default). To run in the
+from which cmake was invoked (repository root by default). To run in
 foreground:
 
     ./bin/wownerod
@@ -160,7 +365,7 @@ To list all available options, run `./bin/wownerod --help`.  Options can be
 specified either on the command line or in a configuration file passed by the
 `--config-file` argument.  To specify an option in the configuration file, add
 a line with the syntax `argumentname=value`, where `argumentname` is the name
-of the argument without the leading dashes, for example, `log-level=1`.
+of the argument without the leading dashes, for example `log-level=1`.
 
 To run in background:
 
@@ -168,50 +373,114 @@ To run in background:
 
 To run as a systemd service, copy
 [wownerod.service](utils/systemd/wownerod.service) to `/etc/systemd/system/` and
-[wow.conf](wow.conf) to `/etc/`. The [example
+[wownerod.conf](utils/conf/wownerod.conf) to `/etc/`. The [example
 service](utils/systemd/wownerod.service) assumes that the user `wownero` exists
 and its home is the data directory specified in the [example
-config](wow.conf).
+config](utils/conf/wownerod.conf).
 
-Once node is synced to network, run the CLI wallet by entering:
+If you're on Mac, you may need to add the `--max-concurrency 1` option to
+wownero-wallet-cli, and possibly wownerod, if you get crashes refreshing.
 
-    ./bin/wownero-wallet-cli
+## Internationalization
 
-Type `help` in CLI wallet to see standard commands (for advanced options, type `help_advanced`).
+See [README.i18n.md](README.i18n.md).
 
-## Tor Anonymity Network
+## Using Tor
 
-### Ubuntu
+While Wownero isn't made to integrate with Tor, it can be used wrapped with torsocks, by
+setting the following configuration parameters and environment variables:
 
-* `sudo apt-get update && sudo apt-get install tor -y`
-* `sudo nano /etc/tor/torrc`
+* `--p2p-bind-ip 127.0.0.1` on the command line or `p2p-bind-ip=127.0.0.1` in
+  wownerod.conf to disable listening for connections on external interfaces.
+* `--no-igd` on the command line or `no-igd=1` in wownerod.conf to disable IGD
+  (UPnP port forwarding negotiation), which is pointless with Tor.
+* `DNS_PUBLIC=tcp` or `DNS_PUBLIC=tcp://x.x.x.x` where x.x.x.x is the IP of the
+  desired DNS server, for DNS requests to go over TCP, so that they are routed
+  through Tor. When IP is not specified, wownerod uses the default list of
+  servers defined in [src/common/dns_utils.cpp](src/common/dns_utils.cpp).
+* `TORSOCKS_ALLOW_INBOUND=1` to tell torsocks to allow wownerod to bind to interfaces
+   to accept connections from the wallet. On some Linux systems, torsocks
+   allows binding to localhost by default, so setting this variable is only
+   necessary to allow binding to local LAN/VPN interfaces to allow wallets to
+   connect from remote hosts. On other systems, it may be needed for local wallets
+   as well.
+* Do NOT pass `--detach` when running through torsocks with systemd, (see
+  [utils/systemd/wownerod.service](utils/systemd/wownerod.service) for details).
 
-add the following:
-```
-HiddenServiceDir /var/lib/tor/wownero/
-HiddenServicePort 34569 127.0.0.1:34569
-HiddenServicePort 34566 127.0.0.1:34566
-HiddenServiceVersion 3
-```
-save and close nano
+Example command line to start wownerod through Tor:
 
-* `sudo /etc/init.d/tor restart && sudo systemctl enable tor`
-* copy [wow.conf](https://git.wownero.com/wownero/wownero/raw/branch/master/wow.conf) file and save it in same directory as `wownerod`.
-* start wownerod like this:
+    DNS_PUBLIC=tcp torsocks wownerod --p2p-bind-ip 127.0.0.1 --no-igd
+
+### Using Tor on Tails
+
+TAILS ships with a very restrictive set of firewall rules. Therefore, you need
+to add a rule to allow this connection too, in addition to telling torsocks to
+allow inbound connections. Full example:
+
+    sudo iptables -I OUTPUT 2 -p tcp -d 127.0.0.1 -m tcp --dport 34568 -j ACCEPT
+    DNS_PUBLIC=tcp torsocks ./wownerod --p2p-bind-ip 127.0.0.1 --no-igd --rpc-bind-ip 127.0.0.1 \
+        --data-dir /home/amnesia/Persistent/your/directory/to/the/blockchain
+
+## Debugging
+
+This section contains general instructions for debugging failed installs or problems encountered with Wownero. First ensure you are running the latest version built from the Github repo.
+
+### Obtaining stack traces and core dumps on Unix systems
+
+We generally use the tool `gdb` (GNU debugger) to provide stack trace functionality, and `ulimit` to provide core dumps in builds which crash or segfault.
+
+* To use gdb in order to obtain a stack trace for a build that has stalled:
+
+Run the build.
+
+Once it stalls, enter the following command:
 
 ```
-./wownerod --config-file=wow.conf
+gdb /path/to/wownerod `pidof wownerod` 
 ```
 
-* `sudo cat /var/lib/tor/wownero/hostname`
-  copy your onion address and share node with others [here](https://monero.fail/?crypto=wownero) and [here](https://forum.wownero.com/t/wownero-tor-onion-sites/623)
+Type `thread apply all bt` within gdb in order to obtain the stack trace
 
-To share your node over p2p, uncomment first line of wownerod.conf and add your onion address.
+* If however the core dumps or segfaults:
 
-More information on running Tor and i2p nodes is available [here](https://forum.wownero.com/t/how-to-setup-a-full-node-with-tor-i2p/588)
+Enter `ulimit -c unlimited` on the command line to enable unlimited filesizes for core dumps
 
-### Access remote Tor node from CLI wallet
+Enter `echo core | sudo tee /proc/sys/kernel/core_pattern` to stop cores from being hijacked by other tools
 
-```
-./wownero-wallet-cli --proxy 127.0.0.1:9050 --daemon-address iy6ry6uudpzvbd72zsipepukp6nsazjdu72n52vg3isfnxqn342flzad.onion:34568
-```
+Run the build.
+
+When it terminates with an output along the lines of "Segmentation fault (core dumped)", there should be a core dump file in the same directory as wownerod. It may be named just `core`, or `core.xxxx` with numbers appended.
+
+You can now analyse this core dump with `gdb` as follows:
+
+`gdb /path/to/wownerod /path/to/dumpfile`
+
+Print the stack trace with `bt`
+
+* To run wownero within gdb:
+
+Type `gdb /path/to/wownerod`
+
+Pass command-line options with `--args` followed by the relevant arguments
+
+Type `run` to run wownerod
+
+### Analysing memory corruption
+
+We use the tool `valgrind` for this.
+
+Run with `valgrind /path/to/wownerod`. It will be slow.
+
+### LMDB
+
+Instructions for debugging suspected blockchain corruption as per @HYC
+
+There is an `mdb_stat` command in the LMDB source that can print statistics about the database but it's not routinely built. This can be built with the following command:
+
+`cd ~/wownero/external/db_drivers/liblmdb && make`
+
+The output of `mdb_stat -ea <path to blockchain dir>` will indicate inconsistencies in the blocks, block_heights and block_info table.
+
+The output of `mdb_dump -s blocks <path to blockchain dir>` and `mdb_dump -s block_info <path to blockchain dir>` is useful for indicating whether blocks and block_info contain the same keys.
+
+These records are dumped as hex data, where the first line is the key and the second line is the data.

cmake/32-bit-toolchain.cmake

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2022, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 # 
 # All rights reserved.
 # 
@@ -26,9 +26,7 @@
 # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-if (NOT CMAKE_HOST_WIN32)
-  set (CMAKE_SYSTEM_NAME Windows)
-endif()
+set (CMAKE_SYSTEM_NAME Windows)
 
 set (GCC_PREFIX i686-w64-mingw32)
 set (CMAKE_C_COMPILER ${GCC_PREFIX}-gcc)

cmake/64-bit-toolchain.cmake

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2022, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 # 
 # All rights reserved.
 # 
@@ -26,9 +26,7 @@
 # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-if (NOT CMAKE_HOST_WIN32)
-  set (CMAKE_SYSTEM_NAME Windows)
-endif()
+set (CMAKE_SYSTEM_NAME Windows)
 
 set (GCC_PREFIX x86_64-w64-mingw32)
 set (CMAKE_C_COMPILER ${GCC_PREFIX}-gcc)

cmake/CheckLinkerFlag.cmake

@@ -15,7 +15,6 @@ macro(CHECK_LINKER_FLAG flag VARIABLE)
       ${_cle_source}
       COMPILE_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS} ${flag}
       CMAKE_FLAGS
-      "-DCMAKE_EXE_LINKER_FLAGS=${flag}"
       OUTPUT_VARIABLE OUTPUT)
     unset(_cle_source)
     set(CMAKE_C_FLAGS ${saved_CMAKE_C_FLAGS})
@@ -40,7 +39,7 @@ macro(CHECK_LINKER_FLAG flag VARIABLE)
       endif()
       set(${VARIABLE} "" CACHE INTERNAL "Have linker flag ${flag}")
       file(APPEND ${CMAKE_BINARY_DIR}${CMAKE_FILES_DIRECTORY}/CMakeError.log
-        "Determining if the ${flag} linker flag is supported "
+        "Determining if the ${flag} linker flag is suppored "
         "failed with the following output:\n"
         "${OUTPUT}\n\n")
     endif()

cmake/CheckTrezor.cmake

@@ -1,181 +0,0 @@
-OPTION(USE_DEVICE_TREZOR "Trezor support compilation" ON)
-OPTION(USE_DEVICE_TREZOR_LIBUSB "Trezor LibUSB compilation" ON)
-OPTION(USE_DEVICE_TREZOR_UDP_RELEASE "Trezor UdpTransport in release mode" OFF)
-OPTION(USE_DEVICE_TREZOR_DEBUG "Trezor Debugging enabled" OFF)
-OPTION(TREZOR_DEBUG "Main trezor debugging switch" OFF)
-
-# Helper function to fix cmake < 3.6.0 FindProtobuf variables
-function(_trezor_protobuf_fix_vars)
-    if(${CMAKE_VERSION} VERSION_LESS "3.6.0")
-        foreach(UPPER
-                PROTOBUF_SRC_ROOT_FOLDER
-                PROTOBUF_IMPORT_DIRS
-                PROTOBUF_DEBUG
-                PROTOBUF_LIBRARY
-                PROTOBUF_PROTOC_LIBRARY
-                PROTOBUF_INCLUDE_DIR
-                PROTOBUF_PROTOC_EXECUTABLE
-                PROTOBUF_LIBRARY_DEBUG
-                PROTOBUF_PROTOC_LIBRARY_DEBUG
-                PROTOBUF_LITE_LIBRARY
-                PROTOBUF_LITE_LIBRARY_DEBUG
-                )
-            if (DEFINED ${UPPER})
-                string(REPLACE "PROTOBUF_" "Protobuf_" Camel ${UPPER})
-                if (NOT DEFINED ${Camel})
-                    set(${Camel} ${${UPPER}} PARENT_SCOPE)
-                endif()
-            endif()
-        endforeach()
-    endif()
-endfunction()
-
-# Use Trezor master switch
-if (USE_DEVICE_TREZOR)
-    # Protobuf is required to build protobuf messages for Trezor
-    include(FindProtobuf OPTIONAL)
-    find_package(Protobuf)
-    _trezor_protobuf_fix_vars()
-
-    # Protobuf handling the cache variables set in docker.
-    if(NOT Protobuf_FOUND AND NOT Protobuf_LIBRARY AND NOT Protobuf_PROTOC_EXECUTABLE AND NOT Protobuf_INCLUDE_DIR)
-        message(STATUS "Could not find Protobuf")
-    elseif(NOT Protobuf_LIBRARY OR NOT EXISTS "${Protobuf_LIBRARY}")
-        message(STATUS "Protobuf library not found: ${Protobuf_LIBRARY}")
-        unset(Protobuf_FOUND)
-    elseif(NOT Protobuf_PROTOC_EXECUTABLE OR NOT EXISTS "${Protobuf_PROTOC_EXECUTABLE}")
-        message(STATUS "Protobuf executable not found: ${Protobuf_PROTOC_EXECUTABLE}")
-        unset(Protobuf_FOUND)
-    elseif(NOT Protobuf_INCLUDE_DIR OR NOT EXISTS "${Protobuf_INCLUDE_DIR}")
-        message(STATUS "Protobuf include dir not found: ${Protobuf_INCLUDE_DIR}")
-        unset(Protobuf_FOUND)
-    else()
-        message(STATUS "Protobuf lib: ${Protobuf_LIBRARY}, inc: ${Protobuf_INCLUDE_DIR}, protoc: ${Protobuf_PROTOC_EXECUTABLE}")
-        set(Protobuf_INCLUDE_DIRS ${Protobuf_INCLUDE_DIR})
-        set(Protobuf_FOUND 1)  # override found if all rquired info was provided by variables
-    endif()
-
-    if(TREZOR_DEBUG)
-        set(USE_DEVICE_TREZOR_DEBUG 1)
-    endif()
-
-    # Compile debugging support (for tests)
-    if (USE_DEVICE_TREZOR_DEBUG)
-        add_definitions(-DWITH_TREZOR_DEBUGGING=1)
-    endif()
-else()
-    message(STATUS "Trezor support disabled by USE_DEVICE_TREZOR")
-endif()
-
-if(Protobuf_FOUND AND USE_DEVICE_TREZOR)
-    if (NOT "$ENV{TREZOR_PYTHON}" STREQUAL "")
-        set(TREZOR_PYTHON "$ENV{TREZOR_PYTHON}" CACHE INTERNAL "Copied from environment variable TREZOR_PYTHON")
-    else()
-        find_package(Python QUIET COMPONENTS Interpreter)  # cmake 3.12+
-        if(Python_Interpreter_FOUND)
-            set(TREZOR_PYTHON "${Python_EXECUTABLE}")
-        endif()
-    endif()
-
-    if(NOT TREZOR_PYTHON)
-        find_package(PythonInterp)
-        if(PYTHONINTERP_FOUND AND PYTHON_EXECUTABLE)
-            set(TREZOR_PYTHON "${PYTHON_EXECUTABLE}")
-        endif()
-    endif()
-
-    if(NOT TREZOR_PYTHON)
-        message(STATUS "Trezor: Python not found")
-    endif()
-endif()
-
-# Protobuf compilation test
-if(Protobuf_FOUND AND USE_DEVICE_TREZOR AND TREZOR_PYTHON)
-    execute_process(COMMAND ${Protobuf_PROTOC_EXECUTABLE} -I "${CMAKE_CURRENT_LIST_DIR}" -I "${Protobuf_INCLUDE_DIR}" "${CMAKE_CURRENT_LIST_DIR}/test-protobuf.proto" --cpp_out ${CMAKE_BINARY_DIR} RESULT_VARIABLE RET OUTPUT_VARIABLE OUT ERROR_VARIABLE ERR)
-    if(RET)
-        message(STATUS "Protobuf test generation failed: ${OUT} ${ERR}")
-    endif()
-
-    try_compile(Protobuf_COMPILE_TEST_PASSED
-        "${CMAKE_BINARY_DIR}"
-        SOURCES
-        "${CMAKE_BINARY_DIR}/test-protobuf.pb.cc"
-        "${CMAKE_CURRENT_LIST_DIR}/test-protobuf.cpp"
-        CMAKE_FLAGS
-        "-DINCLUDE_DIRECTORIES=${Protobuf_INCLUDE_DIR};${CMAKE_BINARY_DIR}"
-        "-DCMAKE_CXX_STANDARD=11"
-        LINK_LIBRARIES ${Protobuf_LIBRARY}
-        OUTPUT_VARIABLE OUTPUT
-    )
-    if(NOT Protobuf_COMPILE_TEST_PASSED)
-        message(STATUS "Protobuf Compilation test failed: ${OUTPUT}.")
-    endif()
-endif()
-
-# Try to build protobuf messages
-if(Protobuf_FOUND AND USE_DEVICE_TREZOR AND TREZOR_PYTHON AND Protobuf_COMPILE_TEST_PASSED)
-    set(ENV{PROTOBUF_INCLUDE_DIRS} "${Protobuf_INCLUDE_DIR}")
-    set(ENV{PROTOBUF_PROTOC_EXECUTABLE} "${Protobuf_PROTOC_EXECUTABLE}")
-    set(TREZOR_PROTOBUF_PARAMS "")
-    if (USE_DEVICE_TREZOR_DEBUG)
-        set(TREZOR_PROTOBUF_PARAMS "--debug")
-    endif()
-    
-    execute_process(COMMAND ${TREZOR_PYTHON} tools/build_protob.py ${TREZOR_PROTOBUF_PARAMS} WORKING_DIRECTORY ${CMAKE_CURRENT_LIST_DIR}/../src/device_trezor/trezor RESULT_VARIABLE RET OUTPUT_VARIABLE OUT ERROR_VARIABLE ERR)
-    if(RET)
-        message(WARNING "Trezor protobuf messages could not be regenerated (err=${RET}, python ${PYTHON})."
-                "OUT: ${OUT}, ERR: ${ERR}."
-                "Please read src/device_trezor/trezor/tools/README.md")
-    else()
-        message(STATUS "Trezor protobuf messages regenerated out: \"${OUT}.\"")
-        set(DEVICE_TREZOR_READY 1)
-        add_definitions(-DDEVICE_TREZOR_READY=1)
-        add_definitions(-DPROTOBUF_INLINE_NOT_IN_HEADERS=0)
-
-        if(CMAKE_BUILD_TYPE STREQUAL "Debug")
-            add_definitions(-DTREZOR_DEBUG=1)
-        endif()
-
-        if(USE_DEVICE_TREZOR_UDP_RELEASE)
-            add_definitions(-DUSE_DEVICE_TREZOR_UDP_RELEASE=1)
-        endif()
-
-        if (Protobuf_INCLUDE_DIR)
-            include_directories(${Protobuf_INCLUDE_DIR})
-        endif()
-
-        # LibUSB support, check for particular version
-        # Include support only if compilation test passes
-        if (USE_DEVICE_TREZOR_LIBUSB)
-            find_package(LibUSB)
-        endif()
-
-        if (LibUSB_COMPILE_TEST_PASSED)
-            add_definitions(-DHAVE_TREZOR_LIBUSB=1)
-            if(LibUSB_INCLUDE_DIRS)
-                include_directories(${LibUSB_INCLUDE_DIRS})
-            endif()
-        endif()
-
-        set(TREZOR_LIBUSB_LIBRARIES "")
-        if(LibUSB_COMPILE_TEST_PASSED)
-            list(APPEND TREZOR_LIBUSB_LIBRARIES ${LibUSB_LIBRARIES} ${LIBUSB_DEP_LINKER})
-            message(STATUS "Trezor compatible LibUSB found at: ${LibUSB_INCLUDE_DIRS}")
-        endif()
-
-        if (BUILD_GUI_DEPS)
-            set(TREZOR_DEP_LIBS "")
-            set(TREZOR_DEP_LINKER "")
-
-            if (Protobuf_LIBRARY)
-                list(APPEND TREZOR_DEP_LIBS ${Protobuf_LIBRARY})
-                string(APPEND TREZOR_DEP_LINKER " -lprotobuf")
-            endif()
-
-            if (TREZOR_LIBUSB_LIBRARIES)
-                list(APPEND TREZOR_DEP_LIBS ${TREZOR_LIBUSB_LIBRARIES})
-                string(APPEND TREZOR_DEP_LINKER " -lusb-1.0 ${LIBUSB_DEP_LINKER}")
-            endif()
-        endif()
-    endif()
-endif()

cmake/Doxyfile.in

@@ -18,7 +18,7 @@
 # that follow. The default is UTF-8 which is also the encoding used for all 
 # text before the first occurrence of this tag. Doxygen uses libiconv (or the 
 # iconv built into libc) for the transcoding. See 
-# https://www.gnu.org/software/libiconv for the list of possible encodings.
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
 
 DOXYFILE_ENCODING      = UTF-8
 
@@ -242,7 +242,7 @@ EXTENSION_MAPPING      =
 
 # If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all 
 # comments according to the Markdown format, which allows for more readable 
-# documentation. See https://daringfireball.net/projects/markdown/ for details. 
+# documentation. See http://daringfireball.net/projects/markdown/ for details. 
 # The output of markdown processing is further processed by doxygen, so you 
 # can mix doxygen, HTML, and XML commands with Markdown formatting. 
 # Disable only in case of backward compatibilities issues.
@@ -589,7 +589,7 @@ LAYOUT_FILE            =
 # containing the references data. This must be a list of .bib files. The 
 # .bib extension is automatically appended if omitted. Using this command 
 # requires the bibtex tool to be installed. See also 
-# https://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style 
+# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style 
 # of the bibliography can be controlled using LATEX_BIB_STYLE. To use this 
 # feature you need bibtex and perl available in the search path.
 
@@ -665,7 +665,7 @@ INPUT                  = ../README.md \
 # This tag can be used to specify the character encoding of the source files 
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is 
 # also the default input encoding. Doxygen uses libiconv (or the iconv built 
-# into libc) for the transcoding. See https://www.gnu.org/software/libiconv for 
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for 
 # the list of possible encodings.
 
 INPUT_ENCODING         = UTF-8
@@ -833,7 +833,7 @@ REFERENCES_LINK_SOURCE = YES
 # If the USE_HTAGS tag is set to YES then the references to source code 
 # will point to the HTML generated by the htags(1) tool instead of doxygen 
 # built-in source browser. The htags tool is part of GNU's global source 
-# tagging system (see https://www.gnu.org/software/global/global.html). You 
+# tagging system (see http://www.gnu.org/software/global/global.html). You 
 # will need version 4.8.6 or higher.
 
 USE_HTAGS              = NO
@@ -928,7 +928,7 @@ HTML_EXTRA_FILES       =
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. 
 # Doxygen will adjust the colors in the style sheet and background images 
 # according to this color. Hue is specified as an angle on a colorwheel, 
-# see https://en.wikipedia.org/wiki/Hue for more information. 
+# see http://en.wikipedia.org/wiki/Hue for more information. 
 # For instance the value 0 represents red, 60 is yellow, 120 is green, 
 # 180 is cyan, 240 is blue, 300 purple, and 360 is red again. 
 # The allowed range is 0 to 359.
@@ -981,7 +981,7 @@ HTML_INDEX_NUM_ENTRIES = 100
 # directory and running "make install" will install the docset in 
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find 
 # it at startup. 
-# See https://developer.apple.com/tools/creatingdocsetswithdoxygen.html 
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html 
 # for more information.
 
 GENERATE_DOCSET        = NO
@@ -1179,7 +1179,7 @@ FORMULA_FONTSIZE       = 10
 FORMULA_TRANSPARENT    = YES
 
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax 
-# (see https://www.mathjax.org) which uses client side Javascript for the 
+# (see http://www.mathjax.org) which uses client side Javascript for the 
 # rendering instead of using prerendered bitmaps. Use this if you do not 
 # have LaTeX installed or if you want to formulas look prettier in the HTML 
 # output. When enabled you may also need to install MathJax separately and 
@@ -1194,9 +1194,9 @@ USE_MATHJAX            = NO
 # MATHJAX_RELPATH should be ../mathjax. The default value points to 
 # the MathJax Content Delivery Network so you can quickly see the result without 
 # installing MathJax.  However, it is strongly recommended to install a local 
-# copy of MathJax from https://www.mathjax.org before deployment.
+# copy of MathJax from http://www.mathjax.org before deployment.
 
-MATHJAX_RELPATH        = https://cdn.mathjax.org/mathjax/latest
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
 
 # The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension 
 # names that should be enabled during MathJax rendering.
@@ -1318,7 +1318,7 @@ LATEX_SOURCE_CODE      = NO
 
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the 
 # bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See 
-# https://en.wikipedia.org/wiki/BibTeX for more info.
+# http://en.wikipedia.org/wiki/BibTeX for more info.
 
 LATEX_BIB_STYLE        = plain
 

cmake/FindBacktrace.cmake

@@ -1,98 +0,0 @@
-# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
-# file Copyright.txt or https://cmake.org/licensing for details.
-
-#.rst:
-# FindBacktrace
-# -------------
-#
-# Find provider for backtrace(3).
-#
-# Checks if OS supports backtrace(3) via either libc or custom library.
-# This module defines the following variables:
-#
-# ``Backtrace_HEADER``
-#   The header file needed for backtrace(3). Cached.
-#   Could be forcibly set by user.
-# ``Backtrace_INCLUDE_DIRS``
-#   The include directories needed to use backtrace(3) header.
-# ``Backtrace_LIBRARIES``
-#   The libraries (linker flags) needed to use backtrace(3), if any.
-# ``Backtrace_FOUND``
-#   Is set if and only if backtrace(3) support detected.
-#
-# The following cache variables are also available to set or use:
-#
-# ``Backtrace_LIBRARY``
-#   The external library providing backtrace, if any.
-# ``Backtrace_INCLUDE_DIR``
-#   The directory holding the backtrace(3) header.
-#
-# Typical usage is to generate of header file using configure_file() with the
-# contents like the following::
-#
-#  #cmakedefine01 Backtrace_FOUND
-#  #if Backtrace_FOUND
-#  # include <${Backtrace_HEADER}>
-#  #endif
-#
-# And then reference that generated header file in actual source.
-
-include(CMakePushCheckState)
-include(CheckSymbolExists)
-include(FindPackageHandleStandardArgs)
-
-# List of variables to be provided to find_package_handle_standard_args()
-set(_Backtrace_STD_ARGS Backtrace_INCLUDE_DIR)
-
-if(Backtrace_HEADER)
-  set(_Backtrace_HEADER_TRY "${Backtrace_HEADER}")
-else(Backtrace_HEADER)
-  set(_Backtrace_HEADER_TRY "execinfo.h")
-endif(Backtrace_HEADER)
-
-find_path(Backtrace_INCLUDE_DIR "${_Backtrace_HEADER_TRY}")
-set(Backtrace_INCLUDE_DIRS ${Backtrace_INCLUDE_DIR})
-
-if (NOT DEFINED Backtrace_LIBRARY)
-  # First, check if we already have backtrace(), e.g., in libc
-  cmake_push_check_state(RESET)
-  set(CMAKE_REQUIRED_INCLUDES ${Backtrace_INCLUDE_DIRS})
-  set(CMAKE_REQUIRED_QUIET ${Backtrace_FIND_QUIETLY})
-  check_symbol_exists("backtrace" "${_Backtrace_HEADER_TRY}" _Backtrace_SYM_FOUND)
-  cmake_pop_check_state()
-endif()
-
-if(_Backtrace_SYM_FOUND)
-  # Avoid repeating the message() call below each time CMake is run.
-  if(NOT Backtrace_FIND_QUIETLY AND NOT DEFINED Backtrace_LIBRARY)
-    message(STATUS "backtrace facility detected in default set of libraries")
-  endif()
-  set(Backtrace_LIBRARY "" CACHE FILEPATH "Library providing backtrace(3), empty for default set of libraries")
-else()
-  # Check for external library, for non-glibc systems
-  if(Backtrace_INCLUDE_DIR)
-    # OpenBSD has libbacktrace renamed to libexecinfo
-    find_library(Backtrace_LIBRARY "execinfo")
-  elseif()     # respect user wishes
-    set(_Backtrace_HEADER_TRY "backtrace.h")
-    find_path(Backtrace_INCLUDE_DIR ${_Backtrace_HEADER_TRY})
-    find_library(Backtrace_LIBRARY "backtrace")
-  endif()
-
-  # Prepend list with library path as it's more common practice
-  set(_Backtrace_STD_ARGS Backtrace_LIBRARY ${_Backtrace_STD_ARGS})
-endif()
-
-message(STATUS "Backtrace_LIBRARY: ${Backtrace_LIBRARY}")
-if(Backtrace_LIBRARY STREQUAL "NOTFOUND")
-  set(Backtrace_LIBRARY "")
-endif()
-if(Backtrace_LIBRARY STREQUAL "Backtrace_LIBRARY-NOTFOUND")
-  set(Backtrace_LIBRARY "")
-endif()
-
-set(Backtrace_LIBRARIES ${Backtrace_LIBRARY})
-set(Backtrace_HEADER "${_Backtrace_HEADER_TRY}" CACHE STRING "Header providing backtrace(3) facility")
-
-find_package_handle_standard_args(Backtrace FOUND_VAR Backtrace_FOUND REQUIRED_VARS ${_Backtrace_STD_ARGS})
-mark_as_advanced(Backtrace_HEADER Backtrace_INCLUDE_DIR Backtrace_LIBRARY)

cmake/FindBerkeleyDB.cmake

@@ -0,0 +1,25 @@
+# - Try to find Berkeley DB
+# Once done this will define
+#
+#  BERKELEY_DB_FOUND - system has Berkeley DB
+#  BERKELEY_DB_INCLUDE_DIR - the Berkeley DB include directory
+#  BERKELEY_DB_LIBRARIES - Link these to use Berkeley DB
+#  BERKELEY_DB_DEFINITIONS - Compiler switches required for using Berkeley DB
+
+# Copyright (c) 2006, Alexander Dymo, <adymo@kdevelop.org>
+#
+# Redistribution and use is allowed according to the terms of the BSD license.
+# For details see the accompanying COPYING-CMAKE-SCRIPTS file.
+
+find_path(BERKELEY_DB_INCLUDE_DIR db_cxx.h
+  /usr/include/db4
+  /usr/local/include/db4
+)
+
+find_library(BERKELEY_DB_LIBRARIES NAMES db_cxx )
+
+include(FindPackageHandleStandardArgs)
+find_package_handle_standard_args(Berkeley "Could not find Berkeley DB >= 4.1" BERKELEY_DB_INCLUDE_DIR BERKELEY_DB_LIBRARIES)
+# show the BERKELEY_DB_INCLUDE_DIR and BERKELEY_DB_LIBRARIES variables only in the advanced view
+mark_as_advanced(BERKELEY_DB_INCLUDE_DIR BERKELEY_DB_LIBRARIES )
+

cmake/FindCcache.cmake

@@ -1,67 +0,0 @@
-# Copyright (c) 2014-2022, The Monero Project
-#
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without modification, are
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of source code must retain the above copyright notice, this list of
-#    conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above copyright notice, this list
-#    of conditions and the following disclaimer in the documentation and/or other
-#    materials provided with the distribution.
-#
-# 3. Neither the name of the copyright holder nor the names of its contributors may be
-#    used to endorse or promote products derived from this software without specific
-#    prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# - Try to find readline include dirs and libraries 
-#
-# Automatically finds ccache build accelerator, if it's found in PATH.
-#
-# Usage of this module as follows:
-#
-#     project(monero)
-#     include(FindCcache) # Include AFTER the project() macro to be able to reach the CMAKE_CXX_COMPILER variable
-#
-# Properties modified by this module:
-#
-#  GLOBAL PROPERTY RULE_LAUNCH_COMPILE     set to ccache, when ccache found
-#  GLOBAL PROPERTY RULE_LAUNCH_LINK        set to ccache, when ccache found
-
-find_program(CCACHE_FOUND ccache)
-if (CCACHE_FOUND)
-	# Try to compile a test program with ccache, in order to verify if it really works. (needed on exotic setups)
-	set(TEST_PROJECT "${CMAKE_BINARY_DIR}/${CMAKE_FILES_DIRECTORY}/CMakeTmp")
-	file(WRITE "${TEST_PROJECT}/CMakeLists.txt" [=[
-cmake_minimum_required(VERSION 3.5)
-project(test)
-option (CCACHE "")
-file(WRITE "${CMAKE_SOURCE_DIR}/test.cpp" "int main() { return 0; }")
-set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE "${CCACHE}")
-set_property(GLOBAL PROPERTY RULE_LAUNCH_LINK    "${CCACHE}")
-add_executable(main test.cpp)
-]=])
-	try_compile(RET "${TEST_PROJECT}/build" "${TEST_PROJECT}" "test" CMAKE_FLAGS -DCCACHE="${CCACHE_FOUND}")
-	unset(TEST_PROJECT)
-	if (${RET})
-		# Success
-		message(STATUS "Found usable ccache: ${CCACHE_FOUND}")
-		set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE "${CCACHE_FOUND}")
-		set_property(GLOBAL PROPERTY RULE_LAUNCH_LINK    "${CCACHE_FOUND}")
-	else()
-		message(STATUS "Found ccache ${CCACHE_FOUND}, but is UNUSABLE! Return code: ${RET}")
-	endif()
-else()
-	message(STATUS "ccache NOT found! Please install it for faster rebuilds.")
-endif()

cmake/FindHIDAPI.cmake

@@ -1,69 +0,0 @@
-# - try to find HIDAPI library
-# from http://www.signal11.us/oss/hidapi/
-#
-# Cache Variables: (probably not for direct use in your scripts)
-#  HIDAPI_INCLUDE_DIR
-#  HIDAPI_LIBRARY
-#
-# Non-cache variables you might use in your CMakeLists.txt:
-#  HIDAPI_FOUND
-#  HIDAPI_INCLUDE_DIRS
-#  HIDAPI_LIBRARIES
-#
-# Requires these CMake modules:
-#  FindPackageHandleStandardArgs (known included with CMake >=2.6.2)
-#
-# Original Author:
-# 2009-2010 Ryan Pavlik <rpavlik@iastate.edu> <abiryan@ryand.net>
-# http://academic.cleardefinition.com
-# Iowa State University HCI Graduate Program/VRAC
-#
-# Copyright Iowa State University 2009-2010.
-# Distributed under the Boost Software License, Version 1.0.
-# (See accompanying file LICENSE_1_0.txt or copy at
-# http://www.boost.org/LICENSE_1_0.txt)
-
-find_library(HIDAPI_LIBRARY
-  NAMES hidapi hidapi-libusb)
-
-find_path(HIDAPI_INCLUDE_DIR
-  NAMES hidapi.h
-  PATH_SUFFIXES
-  hidapi)
-
-include(FindPackageHandleStandardArgs)
-find_package_handle_standard_args(HIDAPI
-  DEFAULT_MSG
-  HIDAPI_LIBRARY
-  HIDAPI_INCLUDE_DIR)
-
-if(HIDAPI_FOUND)
-  set(HIDAPI_LIBRARIES "${HIDAPI_LIBRARY}")
-  if((STATIC AND UNIX AND NOT APPLE) OR (DEPENDS AND CMAKE_SYSTEM_NAME STREQUAL "Linux") OR ANDROID)
-    find_library(LIBUSB-1.0_LIBRARY usb-1.0)
-    find_library(LIBUDEV_LIBRARY udev)
-    if(LIBUSB-1.0_LIBRARY)
-      set(HIDAPI_LIBRARIES "${HIDAPI_LIBRARIES};${LIBUSB-1.0_LIBRARY}")
-      if(LIBUDEV_LIBRARY)
-        set(HIDAPI_LIBRARIES "${HIDAPI_LIBRARIES};${LIBUDEV_LIBRARY}")
-      elseif(NOT ANDROID)
-        message(WARNING "libudev library not found, binaries may fail to link.")
-      endif()
-    else()
-      message(WARNING "libusb-1.0 library not found, binaries may fail to link.")
-    endif()
-    if(ANDROID)
-      # libusb uses android log library
-      find_library(ANDROID_LOG_LIBRARY log)
-      if(ANDROID_LOG_LIBRARY)
-        set(HIDAPI_LIBRARIES "${HIDAPI_LIBRARIES};${ANDROID_LOG_LIBRARY}")
-      else()
-        message(WARNING "Android log library not found, binaries may fail to link.")
-      endif()
-    endif()
-  endif()
-
-  set(HIDAPI_INCLUDE_DIRS "${HIDAPI_INCLUDE_DIR}")
-endif()
-
-mark_as_advanced(HIDAPI_INCLUDE_DIR HIDAPI_LIBRARY)

cmake/FindLibUSB.cmake

@@ -1,155 +0,0 @@
-# - Find libusb for portable USB support
-# This module will find libusb as published by
-#  http://libusb.sf.net and
-#  http://libusb-win32.sf.net
-#
-# It will use PkgConfig if present and supported, else search
-# it on its own. If the LibUSB_ROOT_DIR environment variable
-# is defined, it will be used as base path.
-# The following standard variables get defined:
-#  LibUSB_FOUND:        true if LibUSB was found
-#  LibUSB_HEADER_FILE:  the location of the C header file
-#  LibUSB_INCLUDE_DIRS: the directory that contains the include file
-#  LibUSB_LIBRARIES:    the library
-# source: https://github.com/IntelRealSense/librealsense
-
-include ( CheckLibraryExists )
-include ( CheckIncludeFile )
-
-find_package ( PkgConfig )
-if ( PKG_CONFIG_FOUND )
-    pkg_check_modules ( PKGCONFIG_LIBUSB libusb-1.0 )
-    if ( NOT PKGCONFIG_LIBUSB_FOUND )
-        pkg_check_modules ( PKGCONFIG_LIBUSB libusb )
-    endif ( NOT PKGCONFIG_LIBUSB_FOUND )
-endif ( PKG_CONFIG_FOUND )
-
-if ( PKGCONFIG_LIBUSB_FOUND )
-    set ( LibUSB_INCLUDE_DIRS ${PKGCONFIG_LIBUSB_INCLUDE_DIRS} )
-    foreach ( i ${PKGCONFIG_LIBUSB_LIBRARIES} )
-        string ( REGEX MATCH "[^-]*" ibase "${i}" )
-        find_library ( ${ibase}_LIBRARY
-                NAMES ${i}
-                PATHS ${PKGCONFIG_LIBUSB_LIBRARY_DIRS}
-                )
-        if ( ${ibase}_LIBRARY )
-            list ( APPEND LibUSB_LIBRARIES ${${ibase}_LIBRARY} )
-        endif ( ${ibase}_LIBRARY )
-        mark_as_advanced ( ${ibase}_LIBRARY )
-    endforeach ( i )
-
-else ( PKGCONFIG_LIBUSB_FOUND )
-    find_file ( LibUSB_HEADER_FILE
-            NAMES
-            libusb.h usb.h
-            PATHS
-            $ENV{ProgramFiles}/LibUSB-Win32
-            $ENV{LibUSB_ROOT_DIR}
-            PATH_SUFFIXES
-            include
-            libusb-1.0
-            include/libusb-1.0
-            )
-    mark_as_advanced ( LibUSB_HEADER_FILE )
-    get_filename_component ( LibUSB_INCLUDE_DIRS "${LibUSB_HEADER_FILE}" PATH )
-
-    if ( ${CMAKE_SYSTEM_NAME} STREQUAL "Windows" )
-        # LibUSB-Win32 binary distribution contains several libs.
-        # Use the lib that got compiled with the same compiler.
-        if ( MSVC )
-            if ( WIN32 )
-                set ( LibUSB_LIBRARY_PATH_SUFFIX lib/msvc )
-            else ( WIN32 )
-                set ( LibUSB_LIBRARY_PATH_SUFFIX lib/msvc_x64 )
-            endif ( WIN32 )
-        elseif ( BORLAND )
-            set ( LibUSB_LIBRARY_PATH_SUFFIX lib/bcc )
-        elseif ( CMAKE_COMPILER_IS_GNUCC )
-            set ( LibUSB_LIBRARY_PATH_SUFFIX lib/gcc )
-        endif ( MSVC )
-    endif ( ${CMAKE_SYSTEM_NAME} STREQUAL "Windows" )
-
-    find_library ( usb_LIBRARY
-            NAMES
-            usb-1.0 libusb usb
-            PATHS
-            $ENV{ProgramFiles}/LibUSB-Win32
-            $ENV{LibUSB_ROOT_DIR}
-            PATH_SUFFIXES
-            ${LibUSB_LIBRARY_PATH_SUFFIX}
-            )
-    mark_as_advanced ( usb_LIBRARY )
-    if ( usb_LIBRARY )
-        set ( LibUSB_LIBRARIES ${usb_LIBRARY} )
-    endif ( usb_LIBRARY )
-
-endif ( PKGCONFIG_LIBUSB_FOUND )
-
-if ( LibUSB_INCLUDE_DIRS AND LibUSB_LIBRARIES )
-    set ( LibUSB_FOUND true )
-endif ( LibUSB_INCLUDE_DIRS AND LibUSB_LIBRARIES )
-
-if ( LibUSB_FOUND )
-    set ( CMAKE_REQUIRED_INCLUDES "${LibUSB_INCLUDE_DIRS}" )
-    check_include_file ( "${LibUSB_HEADER_FILE}" LibUSB_FOUND )
-endif ( LibUSB_FOUND )
-
-if ( LibUSB_FOUND )
-    check_library_exists ( "${LibUSB_LIBRARIES}" usb_open "" LibUSB_FOUND )
-    check_library_exists ( "${LibUSB_LIBRARIES}" libusb_get_device_list "" LibUSB_VERSION_1.0 )
-    check_library_exists ( "${LibUSB_LIBRARIES}" libusb_get_port_numbers "" LibUSB_VERSION_1.0.16 )
-
-    if((STATIC AND UNIX AND NOT APPLE) OR (DEPENDS AND CMAKE_SYSTEM_NAME STREQUAL "Linux") OR ANDROID)
-        find_library(LIBUDEV_LIBRARY udev)
-        if(LIBUDEV_LIBRARY)
-            set(LibUSB_LIBRARIES "${LibUSB_LIBRARIES};${LIBUDEV_LIBRARY}")
-        else()
-            message(WARNING "libudev library not found, binaries may fail to link.")
-        endif()
-    endif()
-
-    # Library 1.0.16+ compilation test.
-    # The check_library_exists does not work well on Apple with shared libs.
-    if (APPLE OR LibUSB_VERSION_1.0.16 OR STATIC)
-        if (APPLE)
-            if(DEPENDS)
-                list(APPEND TEST_COMPILE_EXTRA_LIBRARIES "-framework Foundation -framework IOKit -framework Security")
-            else()
-                find_library(COREFOUNDATION CoreFoundation)
-                find_library(IOKIT IOKit)
-                list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${IOKIT})
-                list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${COREFOUNDATION})
-
-                if(STATIC)
-                    find_library(OBJC objc.a)
-                    set(LIBUSB_DEP_LINKER ${OBJC})
-                    list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${LIBUSB_DEP_LINKER})
-                endif()
-            endif()
-        endif()
-        if (WIN32)
-            list(APPEND TEST_COMPILE_EXTRA_LIBRARIES setupapi)
-        endif()
-        list(APPEND TEST_COMPILE_EXTRA_LIBRARIES ${LibUSB_LIBRARIES})
-
-        try_compile(LibUSB_COMPILE_TEST_PASSED
-                ${CMAKE_BINARY_DIR}
-                "${CMAKE_CURRENT_LIST_DIR}/test-libusb-version.c"
-                CMAKE_FLAGS
-                    "-DINCLUDE_DIRECTORIES=${LibUSB_INCLUDE_DIRS}"
-                    "-DLINK_DIRECTORIES=${LibUSB_LIBRARIES}"
-                LINK_LIBRARIES ${TEST_COMPILE_EXTRA_LIBRARIES}
-                OUTPUT_VARIABLE OUTPUT)
-        unset(TEST_COMPILE_EXTRA_LIBRARIES)
-        message(STATUS "LibUSB Compilation test: ${LibUSB_COMPILE_TEST_PASSED}")
-    endif()
-endif ( LibUSB_FOUND )
-
-if ( NOT LibUSB_FOUND )
-    if ( NOT LibUSB_FIND_QUIETLY )
-        message ( STATUS "LibUSB not found, try setting LibUSB_ROOT_DIR environment variable." )
-    endif ( NOT LibUSB_FIND_QUIETLY )
-    if ( LibUSB_FIND_REQUIRED )
-        message ( FATAL_ERROR "" )
-    endif ( LibUSB_FIND_REQUIRED )
-endif ( NOT LibUSB_FOUND )

cmake/FindPCSC.cmake

@@ -0,0 +1,53 @@
+# - Find PCSC
+# Find the native PCSC includes and library
+#
+#  PCSC_INCLUDE_DIR - where to find winscard.h, wintypes.h, etc.
+#  PCSC_LIBRARIES   - List of libraries when using PCSC.
+#  PCSC_FOUND       - True if PCSC found.
+
+
+IF (PCSC_INCLUDE_DIR AND PCSC_LIBRARIES)
+  # Already in cache, be silent
+  SET(PCSC_FIND_QUIETLY TRUE)
+ENDIF (PCSC_INCLUDE_DIR AND PCSC_LIBRARIES)
+
+IF (NOT WIN32)
+  FIND_PACKAGE(PkgConfig)
+  PKG_CHECK_MODULES(PC_PCSC libpcsclite)
+
+  FIND_PATH(PCSC_INCLUDE_DIR winscard.h
+    HINTS
+    /usr/include/PCSC
+    ${PC_PCSC_INCLUDEDIR}
+    ${PC_PCSC_INCLUDE_DIRS}
+    PATH_SUFFIXES PCSC
+  )
+
+  FIND_LIBRARY(PCSC_LIBRARY NAMES pcsclite libpcsclite PCSC
+    HINTS
+    ${PC_PCSC_LIBDIR}
+    ${PC_PCSC_LIBRARY_DIRS}
+  )
+
+ELSE (NOT WIN32)
+  IF(BUILD_64 STREQUAL "ON")
+    set(PCSC_INCLUDE_DIR /mingw64/x86_64-w64-mingw32/include)
+    set(PCSC_LIBRARY /mingw64/x86_64-w64-mingw32/lib/libwinscard.a)
+  ELSE(BUILD_64 STREQUAL "ON")
+    set(PCSC_INCLUDE_DIR /mingw32/i686-w64-mingw32/include)
+    set(PCSC_LIBRARY /mingw32/i686-w64-mingw32/lib/libwinscard.a)
+  ENDIF(BUILD_64 STREQUAL "ON")
+ENDIF (NOT WIN32)
+
+# handle the QUIETLY and REQUIRED arguments and set PCSC_FOUND to TRUE if 
+# all listed variables are TRUE
+INCLUDE(FindPackageHandleStandardArgs)
+FIND_PACKAGE_HANDLE_STANDARD_ARGS(PCSC DEFAULT_MSG PCSC_LIBRARY PCSC_INCLUDE_DIR)
+
+IF(PCSC_FOUND)
+  SET( PCSC_LIBRARIES ${PCSC_LIBRARY} )
+ELSE(PCSC_FOUND)
+  SET( PCSC_LIBRARIES )
+ENDIF(PCSC_FOUND)
+
+MARK_AS_ADVANCED( PCSC_LIBRARY PCSC_INCLUDE_DIR )

cmake/FindReadline.cmake

@@ -23,7 +23,7 @@
 
 find_path(Readline_ROOT_DIR
     NAMES include/readline/readline.h
-    PATHS /usr/local/opt/readline/ /opt/homebrew/opt/readline/ /opt/local/ /usr/local/ /usr/
+    PATHS /opt/local/ /usr/local/ /usr/
     NO_DEFAULT_PATH
 )
 
@@ -66,9 +66,7 @@ check_function_exists(rl_copy_text HAVE_COPY_TEXT)
 check_function_exists(rl_filename_completion_function HAVE_COMPLETION_FUNCTION)
 
 if(NOT HAVE_COMPLETION_FUNCTION)
-  if (Readline_LIBRARY)
-    set(CMAKE_REQUIRED_LIBRARIES ${Readline_LIBRARY} ${Termcap_LIBRARY})
-  endif(Readline_LIBRARY)
+  set(CMAKE_REQUIRED_LIBRARIES ${Readline_LIBRARY} ${Termcap_LIBRARY})
   check_function_exists(rl_copy_text HAVE_COPY_TEXT_TC)
   check_function_exists(rl_filename_completion_function HAVE_COMPLETION_FUNCTION_TC)
   set(HAVE_COMPLETION_FUNCTION ${HAVE_COMPLETION_FUNCTION_TC})

cmake/FindUnbound.cmake

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2022, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 # All rights reserved.
 # 
 # Redistribution and use in source and binary forms, with or without modification, are

cmake/GenVersion.cmake

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2022, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 # 
 # All rights reserved.
 # 
@@ -29,43 +29,35 @@
 # Parts of this file are originally copyright (c) 2012-2013 The Cryptonote developers
 
 # Check what commit we're on
+execute_process(COMMAND "${GIT}" rev-parse --short HEAD RESULT_VARIABLE RET OUTPUT_VARIABLE COMMIT OUTPUT_STRIP_TRAILING_WHITESPACE)
 
-function (get_version_tag_from_git GIT)
-    execute_process(COMMAND "${GIT}" rev-parse --short=9 HEAD
-                    WORKING_DIRECTORY ${CMAKE_CURRENT_LIST_DIR}
-                    RESULT_VARIABLE RET
-                    OUTPUT_VARIABLE COMMIT
-                    OUTPUT_STRIP_TRAILING_WHITESPACE)
-
-    if(RET)
-        # Something went wrong, set the version tag to -unknown
-
-        message(WARNING "Cannot determine current commit. Make sure that you are building either from a Git working tree or from a source archive.")
-        set(VERSIONTAG "unknown")
-        set(VERSION_IS_RELEASE "false")
+if(RET)
+	# Something went wrong, set the version tag to -unknown
+	
+    message(WARNING "Cannot determine current commit. Make sure that you are building either from a Git working tree or from a source archive.")
+    set(VERSIONTAG "unknown")
+    configure_file("src/version.cpp.in" "${TO}")
+else()
+	message(STATUS "You are currently on commit ${COMMIT}")
+	
+	# Get all the tags
+	execute_process(COMMAND "${GIT}" rev-list --tags --max-count=1 --abbrev-commit RESULT_VARIABLE RET OUTPUT_VARIABLE TAGGEDCOMMIT OUTPUT_STRIP_TRAILING_WHITESPACE)
+	
+    if(NOT TAGGEDCOMMIT)
+        message(WARNING "Cannot determine most recent tag. Make sure that you are building either from a Git working tree or from a source archive.")
+        set(VERSIONTAG "${COMMIT}")
     else()
-        string(SUBSTRING ${COMMIT} 0 9 COMMIT)
-        message(STATUS "You are currently on commit ${COMMIT}")
-
-        # Get all the tags
-        execute_process(COMMAND "${GIT}" tag -l --points-at HEAD
-                        WORKING_DIRECTORY ${CMAKE_CURRENT_LIST_DIR}
-                        RESULT_VARIABLE RET
-                        OUTPUT_VARIABLE TAG
-                        OUTPUT_STRIP_TRAILING_WHITESPACE)
-
+        message(STATUS "The most recent tag was at ${TAGGEDCOMMIT}")
+        
         # Check if we're building that tagged commit or a different one
-        if(TAG)
+        if(COMMIT STREQUAL TAGGEDCOMMIT)
             message(STATUS "You are building a tagged release")
             set(VERSIONTAG "release")
-            set(VERSION_IS_RELEASE "true")
         else()
             message(STATUS "You are ahead of or behind a tagged release")
             set(VERSIONTAG "${COMMIT}")
-            set(VERSION_IS_RELEASE "false")
-        endif()	    
-    endif()
+        endif()
+    endif()	    
 
-    set(VERSIONTAG "${VERSIONTAG}" PARENT_SCOPE)
-    set(VERSION_IS_RELEASE "${VERSION_IS_RELEASE}" PARENT_SCOPE)
-endfunction()
+    configure_file("src/version.cpp.in" "${TO}")
+endif()

cmake/SetClangTidy.cmake

@@ -1,72 +0,0 @@
-# Copyright (c) 2014-2022, The Monero Project
-#
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without modification, are
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of source code must retain the above copyright notice, this list of
-#    conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above copyright notice, this list
-#    of conditions and the following disclaimer in the documentation and/or other
-#    materials provided with the distribution.
-#
-# 3. Neither the name of the copyright holder nor the names of its contributors may be
-#    used to endorse or promote products derived from this software without specific
-#    prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# https://cmake.org/cmake/help/latest/variable/CMAKE_LANG_CLANG_TIDY.html
-# This module sets the following variables:
-# CMAKE_C_CLANG_TIDY
-# CMAKE_CXX_CLANG_TIDY
-# when clang-tidy is found in PATH. Afterwards, the code is being linted by the tool.
-# The checks to be enabled can be manipulated with the variable MONERO_CLANG_TIDY_CHECKS
-
-macro (monero_clang_tidy LANGUAGE)
-	set(TOOL_NAME "clang-tidy")
-	set(MONERO_CLANG_TIDY_MIN_VERSION "3.6")
-	if(${CMAKE_VERSION} VERSION_LESS "${MONERO_CLANG_TIDY_MIN_VERSION}")
-		message(FATAL_ERROR "Sorry, ${TOOL_NAME} is available for CMake from version ${MONERO_CLANG_TIDY_MIN_VERSION}")
-	else()
-		message(STATUS "Trying to enable ${TOOL_NAME}")
-		find_program(MONERO_CLANG_BIN ${TOOL_NAME})
-		if(NOT MONERO_CLANG_BIN)
-			message(FATAL_ERROR "${TOOL_NAME} not found! Try running: sudo apt install ${TOOL_NAME}")
-		else()
-			message(STATUS "Found ${MONERO_CLANG_BIN}")
-			set(MONERO_CLANG_TIDY_CHECKS
-			    -header-filter=.; 	# By default the headers are excluded. This line enables them.
-			    -checks=*; 		# Currently enabling all checks
-			    # An example of selectively enabling checks:
-			    #-checks=bugprone-*,cppcoreguidelines-avoid-goto # Have to be in one line :(
-			)
-			# Current list of checks is avaibale under:
-			# https://clang.llvm.org/extra/clang-tidy/
-			if (${LANGUAGE} STREQUAL "C")
-				set(CMAKE_C_CLANG_TIDY
-					${MONERO_CLANG_BIN}; # Mind the semicolon
-					${MONERO_CLANG_TIDY_CHECKS}
-				)
-			elseif (${LANGUAGE} STREQUAL "CXX")
-				set(CMAKE_CXX_CLANG_TIDY
-					${MONERO_CLANG_BIN}; # Mind the semicolon
-					${MONERO_CLANG_TIDY_CHECKS}
-				)
-			else()
-				message(FATAL_ERROR "${TOOL_NAME}: Unsupported language: ${LANGUAGE}")
-			endif()
-		endif()
-	endif()
-endmacro()
-

cmake/Version.cmake

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2022, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 # 
 # All rights reserved.
 # 
@@ -26,25 +26,27 @@
 # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-function (write_version tag)
-  set(VERSIONTAG "${tag}" CACHE STRING "The tag portion of the Monero software version" FORCE)
-  configure_file("${CMAKE_CURRENT_LIST_DIR}/../src/version.cpp.in" "${CMAKE_BINARY_DIR}/version.cpp")
+function (write_static_version_header hash)
+  set(VERSIONTAG "${hash}")
+  configure_file("${CMAKE_SOURCE_DIR}/src/version.cpp.in" "${CMAKE_BINARY_DIR}/version.cpp")
 endfunction ()
 
 find_package(Git QUIET)
 if ("$Format:$" STREQUAL "")
   # We're in a tarball; use hard-coded variables.
-  set(VERSION_IS_RELEASE "true")
-  write_version("release")
+  write_static_version_header("release")
 elseif (GIT_FOUND OR Git_FOUND)
   message(STATUS "Found Git: ${GIT_EXECUTABLE}")
-  include(GitVersion)
-  get_version_tag_from_git("${GIT_EXECUTABLE}")
-  write_version("${VERSIONTAG}")
+  add_custom_command(
+    OUTPUT            "${CMAKE_BINARY_DIR}/version.cpp"
+    COMMAND           "${CMAKE_COMMAND}"
+                      "-D" "GIT=${GIT_EXECUTABLE}"
+                      "-D" "TO=${CMAKE_BINARY_DIR}/version.cpp"
+                      "-P" "cmake/GenVersion.cmake"
+    WORKING_DIRECTORY "${CMAKE_SOURCE_DIR}")
 else()
   message(STATUS "WARNING: Git was not found!")
-  set(VERSION_IS_RELEASE "false")
-  write_version("unknown")
+  write_static_version_header("unknown")
 endif ()
 add_custom_target(genversion ALL
   DEPENDS "${CMAKE_BINARY_DIR}/version.cpp")

cmake/test-libusb-version.c

@@ -1,52 +0,0 @@
-// Copyright (c) 2014-2022, The Monero Project
-// 
-// All rights reserved.
-// 
-// Redistribution and use in source and binary forms, with or without modification, are
-// permitted provided that the following conditions are met:
-// 
-// 1. Redistributions of source code must retain the above copyright notice, this list of
-//    conditions and the following disclaimer.
-// 
-// 2. Redistributions in binary form must reproduce the above copyright notice, this list
-//    of conditions and the following disclaimer in the documentation and/or other
-//    materials provided with the distribution.
-// 
-// 3. Neither the name of the copyright holder nor the names of its contributors may be
-//    used to endorse or promote products derived from this software without specific
-//    prior written permission.
-// 
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#include <libusb.h>
-
-#define UNUSED(expr) (void)(expr)
-
-int main(int argc, char *argv[]) {
-  libusb_device **devs;
-  libusb_context *ctx = NULL;
-
-  int r = libusb_init(&ctx); UNUSED(r);
-  ssize_t cnt = libusb_get_device_list(ctx, &devs); UNUSED(cnt);
-
-  struct libusb_device_descriptor desc;
-  r = libusb_get_device_descriptor(devs[0], &desc); UNUSED(r);
-  uint8_t bus_id = libusb_get_bus_number(devs[0]); UNUSED(bus_id);
-  uint8_t addr = libusb_get_device_address(devs[0]); UNUSED(addr);
-
-  uint8_t tmp_path[16];
-  r = libusb_get_port_numbers(devs[0], tmp_path, sizeof(tmp_path));
-  UNUSED(r);
-  UNUSED(tmp_path);
-
-  libusb_free_device_list(devs, 1);
-  libusb_exit(ctx);
-}

cmake/test-protobuf.cpp

@@ -1,43 +0,0 @@
-// Copyright (c) 2014-2022, The Monero Project
-// 
-// All rights reserved.
-// 
-// Redistribution and use in source and binary forms, with or without modification, are
-// permitted provided that the following conditions are met:
-// 
-// 1. Redistributions of source code must retain the above copyright notice, this list of
-//    conditions and the following disclaimer.
-// 
-// 2. Redistributions in binary form must reproduce the above copyright notice, this list
-//    of conditions and the following disclaimer in the documentation and/or other
-//    materials provided with the distribution.
-// 
-// 3. Neither the name of the copyright holder nor the names of its contributors may be
-//    used to endorse or promote products derived from this software without specific
-//    prior written permission.
-// 
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#include <string>
-#include <iostream>
-#include <google/protobuf/message.h>
-#include <google/protobuf/unknown_field_set.h>
-#include "test-protobuf.pb.h"
-
-int main(int argc, char *argv[]) {
-  google::protobuf::UnknownFieldSet ufs;
-  ufs.ClearAndFreeMemory();
-
-  Success sc;
-  sc.set_message("test");
-  sc.SerializeToOstream(&std::cerr);
-  return 0;
-}

cmake/test-protobuf.proto

@@ -1,7 +0,0 @@
-syntax = "proto2";
-
-import "google/protobuf/descriptor.proto";
-
-message Success {
-    optional string message = 1;
-}

cmake/test-static-assert.c

@@ -1,4 +1,4 @@
-// Copyright (c) 2014-2022, The Monero Project
+// Copyright (c) 2014-2018, The Monero Project
 // 
 // All rights reserved.
 // 

cmake/test-static-assert.cpp

@@ -1,4 +1,4 @@
-// Copyright (c) 2014-2022, The Monero Project
+// Copyright (c) 2014-2018, The Monero Project
 // 
 // All rights reserved.
 // 

contrib/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (c) 2014-2022, The Monero Project
+# Copyright (c) 2014-2018, The Monero Project
 # 
 # All rights reserved.
 # 
@@ -26,6 +26,10 @@
 # STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 # THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
-monero_enable_coverage()
+# warnings are cleared only for GCC on Linux
+if (NOT (MINGW OR APPLE OR FREEBSD OR OPENBSD OR DRAGONFLY))
+  add_compile_options("${WARNINGS_AS_ERRORS_FLAG}") # applies only to targets that follow
+endif()
+
 add_subdirectory(epee)
 

contrib/brew/Brewfile

@@ -1,34 +0,0 @@
-# Brewfile for Monero
-# A homebrew Brewfile installs all required dependencies in one shot
-# see https://coderwall.com/p/afmnbq/homebrew-s-new-feature-brewfiles
-#     https://github.com/Homebrew/homebrew-bundle
-# execute brew bundle in the directory containing the Brewfile
-
-tap "homebrew/bundle"
-tap "homebrew/cask"
-tap "homebrew/cask-versions"
-tap "homebrew/core"
-
-brew "autoconf"
-brew "autogen"
-brew "automake"
-brew "binutils"
-brew "coreutils"
-brew "cmake"
-brew "pkg-config"
-brew "boost"
-brew "openssl"
-brew "hidapi"
-brew "zmq"
-brew "libpgm"
-brew "unbound"
-brew "libsodium"
-brew "miniupnpc"
-brew "readline"
-brew "expat"
-brew "ccache"
-brew "doxygen"
-brew "graphviz"
-brew "libunwind-headers"
-brew "xz"
-brew "protobuf"

contrib/depends/.gitignore

@@ -1,10 +0,0 @@
-SDKs/
-work/
-built/
-sources/
-config.site
-x86_64*
-i686*
-mips*
-arm*
-aarch64*

contrib/depends/Makefile

@@ -1,229 +0,0 @@
-.NOTPARALLEL :
-
-SOURCES_PATH ?= $(BASEDIR)/sources
-BASE_CACHE ?= $(BASEDIR)/built
-FALLBACK_DOWNLOAD_PATH ?= https://downloads.getmonero.org/depends-sources
-
-BUILD = $(shell ./config.guess)
-HOST ?= $(BUILD)
-PATCHES_PATH = $(BASEDIR)/patches
-BASEDIR = $(CURDIR)
-HASH_LENGTH:=11
-DOWNLOAD_CONNECT_TIMEOUT:=30
-DOWNLOAD_RETRIES:=5
-HOST_ID_SALT ?= salt
-BUILD_ID_SALT ?= salt
-
-host:=$(BUILD)
-ifneq ($(HOST),)
-host:=$(HOST)
-host_toolchain:=$(HOST)-
-endif
-
-ifneq ($(DEBUG),)
-release_type=Debug
-else
-release_type=Release
-endif
-
-ifneq ($(TESTS),)
-build_tests=ON
-release_type=Debug
-else
-build_tests=OFF
-endif
-
-base_build_dir=$(BASEDIR)/work/build
-base_staging_dir=$(BASEDIR)/work/staging
-base_download_dir=$(BASEDIR)/work/download
-canonical_host:=$(shell ./config.sub $(HOST))
-build:=$(shell ./config.sub $(BUILD))
-
-build_arch =$(firstword $(subst -, ,$(build)))
-build_vendor=$(word 2,$(subst -, ,$(build)))
-full_build_os:=$(subst $(build_arch)-$(build_vendor)-,,$(build))
-build_os:=$(findstring linux,$(full_build_os))
-build_os+=$(findstring darwin,$(full_build_os))
-build_os:=$(strip $(build_os))
-ifeq ($(build_os),)
-build_os=$(full_build_os)
-endif
-
-host_arch=$(firstword $(subst -, ,$(canonical_host)))
-host_vendor=$(word 2,$(subst -, ,$(canonical_host)))
-full_host_os:=$(subst $(host_arch)-$(host_vendor)-,,$(canonical_host))
-host_os:=$(findstring android,$(full_host_os))
-ifeq ($(host_os),)
-host_os:=$(findstring linux,$(full_host_os))
-endif
-host_os+=$(findstring darwin,$(full_host_os))
-host_os+=$(findstring freebsd,$(full_host_os))
-host_os+=$(findstring mingw32,$(full_host_os))
-host_os:=$(strip $(host_os))
-ifeq ($(host_os),)
-host_os=$(full_host_os)
-endif
-
-$(host_arch)_$(host_os)_prefix=$(BASEDIR)/$(host)
-$(host_arch)_$(host_os)_host=$(host)
-host_prefix=$($(host_arch)_$(host_os)_prefix)
-build_prefix=$(host_prefix)/native
-ifeq ($(host_os),mingw32)
-host_cmake=Windows
-endif
-ifeq ($(host_os),linux)
-host_cmake=Linux
-endif
-ifeq ($(host_os),freebsd)
-host_cmake=FreeBSD
-endif
-ifeq ($(host_os),darwin)
-host_cmake=Darwin
-endif
-ifeq ($(host_os),android)
-host_cmake=Android
-endif
-
-AT_$(V):=
-AT_:=@
-AT:=$(AT_$(V))
-
-all: install
-
-include hosts/$(host_os).mk
-include hosts/default.mk
-include builders/$(build_os).mk
-include builders/default.mk
-include packages/packages.mk
-
-build_id_string:=$(BUILD_ID_SALT)
-build_id_string+=$(shell $(build_CC) --version 2>/dev/null)
-build_id_string+=$(shell $(build_AR) --version 2>/dev/null)
-build_id_string+=$(shell $(build_CXX) --version 2>/dev/null)
-build_id_string+=$(shell $(build_RANLIB) --version 2>/dev/null)
-build_id_string+=$(shell $(build_STRIP) --version 2>/dev/null)
-
-$(host_arch)_$(host_os)_id_string:=$(HOST_ID_SALT)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_CC) --version 2>/dev/null)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_AR) --version 2>/dev/null)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_CXX) --version 2>/dev/null)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_RANLIB) --version 2>/dev/null)
-$(host_arch)_$(host_os)_id_string+=$(shell $(host_STRIP) --version 2>/dev/null)
-
-packages += $($(host_arch)_$(host_os)_packages) $($(host_os)_packages)
-native_packages += $($(host_arch)_$(host_os)_native_packages) $($(host_os)_native_packages)
-
-all_packages = $(packages) $(native_packages)
-
-meta_depends = Makefile funcs.mk builders/default.mk hosts/default.mk hosts/$(host_os).mk builders/$(build_os).mk
-
-$(host_arch)_$(host_os)_native_toolchain?=$($(host_os)_native_toolchain)
-
-include funcs.mk
-
-CONF_PKGS := cmake-conf mxe-conf
-
-build-only-$(1)_$(3): CMAKE_RUNRESULT_FILE = $(PREFIX)/share/cmake/modules/TryRunResults.cmake
-build-only-$(1)_$(3): CMAKE_TOOLCHAIN_FILE = $(PREFIX)/$(3)/share/cmake/mxe-conf.cmake
-build-only-$(1)_$(3): CMAKE_TOOLCHAIN_DIR  = $(PREFIX)/$(3)/share/cmake/mxe-conf.d
-build-only-$(1)_$(3): CMAKE_STATIC_BOOL = $(if $(findstring shared,$(3)),OFF,ON)
-build-only-$(1)_$(3): CMAKE_SHARED_BOOL = $(if $(findstring shared,$(3)),ON,OFF)
-
-
-toolchain_path=$($($(host_arch)_$(host_os)_native_toolchain)_prefixbin)
-final_build_id_long+=$(shell $(build_SHA256SUM) config.site.in)
-final_build_id_long+=$(shell $(build_SHA256SUM) toolchain.cmake.in)
-final_build_id+=$(shell echo -n "$(final_build_id_long)" | $(build_SHA256SUM) | cut -c-$(HASH_LENGTH))
-$(host_prefix)/.stamp_$(final_build_id): $(native_packages) $(packages)
-	$(AT)rm -rf $(@D)
-	$(AT)mkdir -p $(@D)
-	$(AT)echo copying packages: $^
-	$(AT)echo to: $(@D)
-	$(AT)cd $(@D); $(foreach package,$^, tar xf $($(package)_cached); )
-	$(AT)touch $@
-
-$(host_prefix)/share/config.site : config.site.in $(host_prefix)/.stamp_$(final_build_id)
-	$(AT)@mkdir -p $(@D)
-	$(AT)sed -e 's|@HOST@|$(host)|' \
-            -e 's|@CC@|$(toolchain_path)$(host_CC)|' \
-            -e 's|@CXX@|$(toolchain_path)$(host_CXX)|' \
-            -e 's|@AR@|$(toolchain_path)$(host_AR)|' \
-            -e 's|@RANLIB@|$(toolchain_path)$(host_RANLIB)|' \
-            -e 's|@NM@|$(toolchain_path)$(host_NM)|' \
-            -e 's|@STRIP@|$(toolchain_path)$(host_STRIP)|' \
-            -e 's|@build_os@|$(build_os)|' \
-            -e 's|@host_os@|$(host_os)|' \
-            -e 's|@CFLAGS@|$(strip $(host_CFLAGS) $(host_$(release_type)_CFLAGS))|' \
-            -e 's|@CXXFLAGS@|$(strip $(host_CXXFLAGS) $(host_$(release_type)_CXXFLAGS))|' \
-            -e 's|@CPPFLAGS@|$(strip $(host_CPPFLAGS) $(host_$(release_type)_CPPFLAGS))|' \
-            -e 's|@LDFLAGS@|$(strip $(host_LDFLAGS) $(host_$(release_type)_LDFLAGS))|' \
-            -e 's|@allow_host_packages@|$(ALLOW_HOST_PACKAGES)|' \
-            -e 's|@debug@|$(DEBUG)|' \
-            $< > $@
-	$(AT)touch $@
-
-$(host_prefix)/share/toolchain.cmake : toolchain.cmake.in $(host_prefix)/.stamp_$(final_build_id)
-	$(AT)@mkdir -p $(@D)
-	$(AT)sed -e 's|@HOST@|$(host)|' \
-            -e 's|@CC@|$(toolchain_path)$(host_CC)|' \
-            -e 's|@CXX@|$(toolchain_path)$(host_CXX)|' \
-            -e 's|@AR@|$(toolchain_path)$(host_AR)|' \
-            -e 's|@RANLIB@|$(toolchain_path)$(host_RANLIB)|' \
-            -e 's|@NM@|$(toolchain_path)$(host_NM)|' \
-            -e 's|@STRIP@|$(toolchain_path)$(host_STRIP)|' \
-            -e 's|@build_os@|$(build_os)|' \
-            -e 's|@host_os@|$(host_os)|' \
-            -e 's|@CFLAGS@|$(strip $(host_CFLAGS) $(host_$(release_type)_CFLAGS))|' \
-            -e 's|@CXXFLAGS@|$(strip $(host_CXXFLAGS) $(host_$(release_type)_CXXFLAGS))|' \
-            -e 's|@CPPFLAGS@|$(strip $(host_CPPFLAGS) $(host_$(release_type)_CPPFLAGS))|' \
-            -e 's|@LDFLAGS@|$(strip $(host_LDFLAGS) $(host_$(release_type)_LDFLAGS))|' \
-            -e 's|@allow_host_packages@|$(ALLOW_HOST_PACKAGES)|' \
-            -e 's|@debug@|$(DEBUG)|' \
-            -e 's|@release_type@|$(release_type)|' \
-            -e 's|@build_tests@|$(build_tests)|' \
-            -e 's|@depends@|$(host_cmake)|' \
-            -e 's|@prefix@|$($(host_arch)_$(host_os)_prefix)|'\
-            -e 's|@arch@|$(host_arch)|'\
-            $< > $@
-	$(AT)touch $@
-
-define check_or_remove_cached
-  mkdir -p $(BASE_CACHE)/$(host)/$(package) && cd $(BASE_CACHE)/$(host)/$(package); \
-  $(build_SHA256SUM) -c $($(package)_cached_checksum) >/dev/null 2>/dev/null || \
-  ( rm -f $($(package)_cached_checksum); \
-    if test -f "$($(package)_cached)"; then echo "Checksum mismatch for $(package). Forcing rebuild.."; rm -f $($(package)_cached_checksum) $($(package)_cached); fi )
-endef
-
-define check_or_remove_sources
-  mkdir -p $($(package)_source_dir); cd $($(package)_source_dir); \
-  test -f $($(package)_fetched) && ( $(build_SHA256SUM) -c $($(package)_fetched) >/dev/null 2>/dev/null || \
-    ( echo "Checksum missing or mismatched for $(package) source. Forcing re-download."; \
-      rm -f $($(package)_all_sources) $($(1)_fetched))) || true
-endef
-
-check-packages:
-	@$(foreach package,$(all_packages),$(call check_or_remove_cached,$(package));)
-check-sources:
-	@$(foreach package,$(all_packages),$(call check_or_remove_sources,$(package));)
-
-$(host_prefix)/share/config.site: check-packages
-$(host_prefix)/share/toolchain.cmake: check-packages
-
-check-packages: check-sources
-
-install: check-packages $(host_prefix)/share/config.site
-install: check-packages $(host_prefix)/share/toolchain.cmake
-
-download-one: check-sources $(all_sources)
-
-download-osx:
-	@$(MAKE) -s HOST=x86_64-apple-darwin11 download-one
-download-linux:
-	@$(MAKE) -s HOST=x86_64-unknown-linux-gnu download-one
-download-win:
-	@$(MAKE) -s HOST=x86_64-w64-mingw32 download-one
-download: download-osx download-linux download-win
-
- $(foreach package,$(all_packages),$(eval $(call ext_add_stages,$(package))))
-
-.PHONY: install cached download-one download-osx download-linux download-win download check-packages check-sources

contrib/depends/README.md

@@ -1,74 +0,0 @@
-### Usage
-
-To build dependencies for the current arch+OS:
-
-```bash
-make
-```
-
-To build for another arch/OS:
-
-```bash
-make HOST=host-platform-triplet
-```
-
-For example:
-
-```bash
-make HOST=x86_64-w64-mingw32 -j4
-```
-
-A toolchain will be generated that's suitable for plugging into Monero's
-cmake. In the above example, a dir named x86_64-w64-mingw32 will be
-created. To use it for Monero:
-
-```bash
-cmake -DCMAKE_TOOLCHAIN=`pwd`/contrib/depends/x86_64-w64-mingw32
-```
-
-Common `host-platform-triplets` for cross compilation are:
-
-- `i686-w64-mingw32` for Win32
-- `x86_64-w64-mingw32` for Win64
-- `x86_64-apple-darwin11` for MacOSX x86_64
-- `arm-linux-gnueabihf` for Linux ARM 32 bit
-- `aarch64-linux-gnu` for Linux ARM 64 bit
-- `riscv64-linux-gnu` for Linux RISCV 64 bit
-
-No other options are needed, the paths are automatically configured.
-
-Dependency Options:
-The following can be set when running make: make FOO=bar
-
-```
-SOURCES_PATH: downloaded sources will be placed here
-BASE_CACHE: built packages will be placed here
-FALLBACK_DOWNLOAD_PATH: If a source file can't be fetched, try here before giving up
-DEBUG: disable some optimizations and enable more runtime checking
-HOST_ID_SALT: Optional salt to use when generating host package ids
-BUILD_ID_SALT: Optional salt to use when generating build package ids
-```
-
-Additional targets:
-
-```
-download: run 'make download' to fetch all sources without building them
-download-osx: run 'make download-osx' to fetch all sources needed for osx builds
-download-win: run 'make download-win' to fetch all sources needed for win builds
-download-linux: run 'make download-linux' to fetch all sources needed for linux builds
-```
-
-#Mingw builds
-
-Building for 32/64bit mingw requires switching alternatives to a posix mode
-
-```bash
-update-alternatives --set x86_64-w64-mingw32-g++ x86_64-w64-mingw32-g++-posix
-update-alternatives --set x86_64-w64-mingw32-gcc x86_64-w64-mingw32-gcc-posix
-```
-
-### Other documentation
-
-- [description.md](description.md): General description of the depends system
-- [packages.md](packages.md): Steps for adding packages
-

contrib/depends/builders/darwin.mk

@@ -1,22 +0,0 @@
-build_darwin_CC: = $(shell xcrun -f clang)
-build_darwin_CXX: = $(shell xcrun -f clang++)
-build_darwin_AR: = $(shell xcrun -f ar)
-build_darwin_RANLIB: = $(shell xcrun -f ranlib)
-build_darwin_STRIP: = $(shell xcrun -f strip)
-build_darwin_OTOOL: = $(shell xcrun -f otool)
-build_darwin_NM: = $(shell xcrun -f nm)
-build_darwin_INSTALL_NAME_TOOL:=$(shell xcrun -f install_name_tool)
-build_darwin_SHA256SUM = shasum -a 256
-build_darwin_DOWNLOAD = curl --location --fail --connect-timeout $(DOWNLOAD_CONNECT_TIMEOUT) --retry $(DOWNLOAD_RETRIES) -o
-
-#darwin host on darwin builder. overrides darwin host preferences.
-darwin_CC=$(shell xcrun -f clang) -mmacosx-version-min=$(OSX_MIN_VERSION)
-darwin_CXX:=$(shell xcrun -f clang++) -mmacosx-version-min=$(OSX_MIN_VERSION) -stdlib=libc++
-darwin_AR:=$(shell xcrun -f ar)
-darwin_RANLIB:=$(shell xcrun -f ranlib)
-darwin_STRIP:=$(shell xcrun -f strip)
-darwin_LIBTOOL:=$(shell xcrun -f libtool)
-darwin_OTOOL:=$(shell xcrun -f otool)
-darwin_NM:=$(shell xcrun -f nm)
-darwin_INSTALL_NAME_TOOL:=$(shell xcrun -f install_name_tool)
-darwin_native_toolchain=

contrib/depends/builders/default.mk

@@ -1,20 +0,0 @@
-default_build_CC = gcc
-default_build_CXX = g++
-default_build_AR = ar
-default_build_RANLIB = ranlib
-default_build_STRIP = strip
-default_build_NM = nm
-default_build_OTOOL = otool
-default_build_INSTALL_NAME_TOOL = install_name_tool
-
-define add_build_tool_func
-build_$(build_os)_$1 ?= $$(default_build_$1)
-build_$(build_arch)_$(build_os)_$1 ?= $$(build_$(build_os)_$1)
-build_$1=$$(build_$(build_arch)_$(build_os)_$1)
-endef
-$(foreach var,CC CXX AR RANLIB NM STRIP SHA256SUM DOWNLOAD OTOOL INSTALL_NAME_TOOL,$(eval $(call add_build_tool_func,$(var))))
-define add_build_flags_func
-build_$(build_arch)_$(build_os)_$1 += $(build_$(build_os)_$1)
-build_$1=$$(build_$(build_arch)_$(build_os)_$1)
-endef
-$(foreach flags, CFLAGS CXXFLAGS ARFLAGS LDFLAGS, $(eval $(call add_build_flags_func,$(flags))))

contrib/depends/builders/linux.mk

@@ -1,2 +0,0 @@
-build_linux_SHA256SUM = sha256sum
-build_linux_DOWNLOAD = curl --location --fail --connect-timeout $(DOWNLOAD_CONNECT_TIMEOUT) --retry $(DOWNLOAD_RETRIES) -o

contrib/depends/config.site.in

@@ -1,66 +0,0 @@
-depends_prefix="`dirname ${ac_site_file}`/.."
-
-cross_compiling=maybe
-host_alias=@HOST@
-ac_tool_prefix=${host_alias}-
-
-if test -z $with_boost; then
-  with_boost=$depends_prefix
-fi
-
-if test x@host_os@ = xdarwin; then
-  BREW=no
-  PORT=no
-fi
-
-PATH=$depends_prefix/native/bin:$PATH
-PKG_CONFIG="`which pkg-config` --static"
-
-# These two need to remain exported because pkg-config does not see them
-# otherwise. That means they must be unexported at the end of configure.ac to
-# avoid ruining the cache. Sigh.
-export PKG_CONFIG_PATH=$depends_prefix/share/pkgconfig:$depends_prefix/lib/pkgconfig
-if test -z "@allow_host_packages@"; then
-  export PKGCONFIG_LIBDIR=
-fi
-
-CPPFLAGS="-I$depends_prefix/include/ $CPPFLAGS"
-LDFLAGS="-L$depends_prefix/lib $LDFLAGS"
-
-CC="@CC@"
-CXX="@CXX@"
-OBJC="${CC}"
-CCACHE=$depends_prefix/native/bin/ccache
-PYTHONPATH=$depends_prefix/native/lib/python/dist-packages:$PYTHONPATH
-
-if test -n "@AR@"; then
-  AR=@AR@
-  ac_cv_path_ac_pt_AR=${AR}
-fi
-
-if test -n "@RANLIB@"; then
-  RANLIB=@RANLIB@
-  ac_cv_path_ac_pt_RANLIB=${RANLIB}
-fi
-
-if test -n "@NM@"; then
-  NM=@NM@
-  ac_cv_path_ac_pt_NM=${NM}
-fi
-
-if test -n "@debug@"; then
-  enable_reduce_exports=no
-fi
-
-if test -n "@CFLAGS@"; then
-  CFLAGS="@CFLAGS@ $CFLAGS"
-fi
-if test -n "@CXXFLAGS@"; then
-  CXXFLAGS="@CXXFLAGS@ $CXXFLAGS"
-fi
-if test -n "@CPPFLAGS@"; then
-  CPPFLAGS="@CPPFLAGS@ $CPPFLAGS"
-fi
-if test -n "@LDFLAGS@"; then
-  LDFLAGS="@LDFLAGS@ $LDFLAGS"
-fi

contrib/depends/description.md

@@ -1,53 +0,0 @@
-This is a system of building and caching dependencies necessary for building Bitcoin. 
-There are several features that make it different from most similar systems:
-
-### It is designed to be builder and host agnostic
-
-In theory, binaries for any target OS/architecture can be created, from a
-builder running any OS/architecture. In practice, build-side tools must be
-specified when the defaults don't fit, and packages must be amended to work
-on new hosts. For now, a build architecture of x86_64 is assumed, either on
-Linux or OSX.
-
-### No reliance on timestamps
-
-File presence is used to determine what needs to be built. This makes the
-results distributable and easily digestable by automated builders.
-
-### Each build only has its specified dependencies available at build-time.
-
-For each build, the sysroot is wiped and the (recursive) dependencies are
-installed. This makes each build deterministic, since there will never be any
-unknown files available to cause side-effects.
-
-### Each package is cached and only rebuilt as needed.
-
-Before building, a unique build-id is generated for each package. This id
-consists of a hash of all files used to build the package (Makefiles, packages,
-etc), and as well as a hash of the same data for each recursive dependency. If
-any portion of a package's build recipe changes, it will be rebuilt as well as
-any other package that depends on it. If any of the main makefiles (Makefile, 
-funcs.mk, etc) are changed, all packages will be rebuilt. After building, the
-results are cached into a tarball that can be re-used and distributed.
-
-### Package build results are (relatively) deterministic.
-
-Each package is configured and patched so that it will yield the same
-build-results with each consequent build, within a reasonable set of
-constraints. Some things like timestamp insertion are unavoidable, and are
-beyond the scope of this system. Additionally, the toolchain itself must be
-capable of deterministic results. When revisions are properly bumped, a cached
-build should represent an exact single payload.
-
-### Sources are fetched and verified automatically
-
-Each package must define its source location and checksum. The build will fail
-if the fetched source does not match. Sources may be pre-seeded and/or cached
-as desired.
-
-### Self-cleaning
-
-Build and staging dirs are wiped after use, and any previous version of a
-cached result is removed following a successful build. Automated builders
-should be able to build each revision and store the results with no further
-intervention.

contrib/depends/funcs.mk

@@ -1,270 +0,0 @@
-define int_vars
-#Set defaults for vars which may be overridden per-package
-$(1)_cc=$($($(1)_type)_CC)
-$(1)_cxx=$($($(1)_type)_CXX)
-$(1)_objc=$($($(1)_type)_OBJC)
-$(1)_objcxx=$($($(1)_type)_OBJCXX)
-$(1)_ar=$($($(1)_type)_AR)
-$(1)_ranlib=$($($(1)_type)_RANLIB)
-$(1)_libtool=$($($(1)_type)_LIBTOOL)
-$(1)_nm=$($($(1)_type)_NM)
-$(1)_cflags=$($($(1)_type)_CFLAGS) $($($(1)_type)_$(release_type)_CFLAGS)
-$(1)_cxxflags=$($($(1)_type)_CXXFLAGS) $($($(1)_type)_$(release_type)_CXXFLAGS)
-$(1)_arflags=$($($(1)_type)_ARFLAGS) $($($(1)_type)_$(release_type)_ARFLAGS)
-$(1)_ldflags=$($($(1)_type)_LDFLAGS) $($($(1)_type)_$(release_type)_LDFLAGS) -L$($($(1)_type)_prefix)/lib
-$(1)_cppflags=$($($(1)_type)_CPPFLAGS) $($($(1)_type)_$(release_type)_CPPFLAGS) -I$($($(1)_type)_prefix)/include
-$(1)_recipe_hash:=
-endef
-
-define int_get_all_dependencies
-$(sort $(foreach dep,$(2),$(2) $(call int_get_all_dependencies,$(1),$($(dep)_dependencies))))
-endef
-
-define fetch_file_inner
-    ( mkdir -p $$($(1)_download_dir) && echo Fetching $(3) from $(2) && \
-    $(build_DOWNLOAD) "$$($(1)_download_dir)/$(4).temp" "$(2)/$(3)" && \
-    echo "$(5)  $$($(1)_download_dir)/$(4).temp" > $$($(1)_download_dir)/.$(4).hash && \
-    $(build_SHA256SUM) -c $$($(1)_download_dir)/.$(4).hash && \
-    mv $$($(1)_download_dir)/$(4).temp $$($(1)_source_dir)/$(4) && \
-    rm -rf $$($(1)_download_dir) )
-endef
-
-define fetch_file
-    ( test -f $$($(1)_source_dir)/$(4) || \
-    ( $(call fetch_file_inner,$(1),$(2),$(3),$(4),$(5)) || \
-      $(call fetch_file_inner,$(1),$(FALLBACK_DOWNLOAD_PATH),$(4),$(4),$(5))))
-endef
-
-define int_get_build_recipe_hash
-$(eval $(1)_all_file_checksums:=$(shell $(build_SHA256SUM) $(meta_depends) packages/$(1).mk $(addprefix $(PATCHES_PATH)/$(1)/,$($(1)_patches)) | cut -d" " -f1))
-$(eval $(1)_recipe_hash:=$(shell echo -n "$($(1)_all_file_checksums)" | $(build_SHA256SUM) | cut -d" " -f1))
-endef
-
-define int_get_build_id
-$(eval $(1)_dependencies += $($(1)_$(host_arch)_$(host_os)_dependencies) $($(1)_$(host_os)_dependencies))
-$(eval $(1)_all_dependencies:=$(call int_get_all_dependencies,$(1),$($($(1)_type)_native_toolchain) $($(1)_dependencies)))
-$(foreach dep,$($(1)_all_dependencies),$(eval $(1)_build_id_deps+=$(dep)-$($(dep)_version)-$($(dep)_recipe_hash)))
-$(eval $(1)_build_id_long:=$(1)-$($(1)_version)-$($(1)_recipe_hash)-$(release_type) $($(1)_build_id_deps) $($($(1)_type)_id_string))
-$(eval $(1)_build_id:=$(shell echo -n "$($(1)_build_id_long)" | $(build_SHA256SUM) | cut -c-$(HASH_LENGTH)))
-final_build_id_long+=$($(package)_build_id_long)
-
-#compute package-specific paths
-$(1)_build_subdir?=.
-$(1)_download_file?=$($(1)_file_name)
-$(1)_source_dir:=$(SOURCES_PATH)
-$(1)_source:=$$($(1)_source_dir)/$($(1)_file_name)
-$(1)_staging_dir=$(base_staging_dir)/$(host)/$(1)/$($(1)_version)-$($(1)_build_id)
-$(1)_staging_prefix_dir:=$$($(1)_staging_dir)$($($(1)_type)_prefix)
-$(1)_extract_dir:=$(base_build_dir)/$(host)/$(1)/$($(1)_version)-$($(1)_build_id)
-$(1)_download_dir:=$(base_download_dir)/$(1)-$($(1)_version)
-$(1)_build_dir:=$$($(1)_extract_dir)/$$($(1)_build_subdir)
-$(1)_cached_checksum:=$(BASE_CACHE)/$(host)/$(1)/$(1)-$($(1)_version)-$($(1)_build_id).tar.gz.hash
-$(1)_patch_dir:=$(base_build_dir)/$(host)/$(1)/$($(1)_version)-$($(1)_build_id)/.patches-$($(1)_build_id)
-$(1)_prefixbin:=$($($(1)_type)_prefix)/bin/
-$(1)_cached:=$(BASE_CACHE)/$(host)/$(1)/$(1)-$($(1)_version)-$($(1)_build_id).tar.gz
-$(1)_all_sources=$($(1)_file_name) $($(1)_extra_sources)
-
-#stamps
-$(1)_fetched=$(SOURCES_PATH)/download-stamps/.stamp_fetched-$(1)-$($(1)_file_name).hash
-$(1)_extracted=$$($(1)_extract_dir)/.stamp_extracted
-$(1)_preprocessed=$$($(1)_extract_dir)/.stamp_preprocessed
-$(1)_cleaned=$$($(1)_extract_dir)/.stamp_cleaned
-$(1)_built=$$($(1)_build_dir)/.stamp_built
-$(1)_configured=$$($(1)_build_dir)/.stamp_configured
-$(1)_staged=$$($(1)_staging_dir)/.stamp_staged
-$(1)_postprocessed=$$($(1)_staging_prefix_dir)/.stamp_postprocessed
-$(1)_download_path_fixed=$(subst :,\:,$$($(1)_download_path))
-
-
-#default commands
-$(1)_fetch_cmds ?= $(call fetch_file,$(1),$(subst \:,:,$$($(1)_download_path_fixed)),$$($(1)_download_file),$($(1)_file_name),$($(1)_sha256_hash))
-$(1)_extract_cmds ?= mkdir -p $$($(1)_extract_dir) && echo "$$($(1)_sha256_hash)  $$($(1)_source)" > $$($(1)_extract_dir)/.$$($(1)_file_name).hash &&  $(build_SHA256SUM) -c $$($(1)_extract_dir)/.$$($(1)_file_name).hash && tar --strip-components=1 -xf $$($(1)_source)
-$(1)_preprocess_cmds ?=
-$(1)_build_cmds ?=
-$(1)_config_cmds ?=
-$(1)_stage_cmds ?=
-$(1)_set_vars ?=
-
-
-all_sources+=$$($(1)_fetched)
-endef
-#$(foreach dep_target,$($(1)_all_dependencies),$(eval $(1)_dependency_targets=$($(dep_target)_cached)))
-
-
-define int_config_attach_build_config
-$(eval $(call $(1)_set_vars,$(1)))
-$(1)_cflags+=$($(1)_cflags_$(release_type))
-$(1)_cflags+=$($(1)_cflags_$(host_arch)) $($(1)_cflags_$(host_arch)_$(release_type))
-$(1)_cflags+=$($(1)_cflags_$(host_os)) $($(1)_cflags_$(host_os)_$(release_type))
-$(1)_cflags+=$($(1)_cflags_$(host_arch)_$(host_os)) $($(1)_cflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_cxxflags+=$($(1)_cxxflags_$(release_type))
-$(1)_cxxflags+=$($(1)_cxxflags_$(host_arch)) $($(1)_cxxflags_$(host_arch)_$(release_type))
-$(1)_cxxflags+=$($(1)_cxxflags_$(host_os)) $($(1)_cxxflags_$(host_os)_$(release_type))
-$(1)_cxxflags+=$($(1)_cxxflags_$(host_arch)_$(host_os)) $($(1)_cxxflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_arflags+=$($(1)_arflags_$(release_type))
-$(1)_arflags+=$($(1)_arflags_$(host_arch)) $($(1)_arflags_$(host_arch)_$(release_type))
-$(1)_arflags+=$($(1)_arflags_$(host_os)) $($(1)_arflags_$(host_os)_$(release_type))
-$(1)_arflags+=$($(1)_arflags_$(host_arch)_$(host_os)) $($(1)_arflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_cppflags+=$($(1)_cppflags_$(release_type))
-$(1)_cppflags+=$($(1)_cppflags_$(host_arch)) $($(1)_cppflags_$(host_arch)_$(release_type))
-$(1)_cppflags+=$($(1)_cppflags_$(host_os)) $($(1)_cppflags_$(host_os)_$(release_type))
-$(1)_cppflags+=$($(1)_cppflags_$(host_arch)_$(host_os)) $($(1)_cppflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_ldflags+=$($(1)_ldflags_$(release_type))
-$(1)_ldflags+=$($(1)_ldflags_$(host_arch)) $($(1)_ldflags_$(host_arch)_$(release_type))
-$(1)_ldflags+=$($(1)_ldflags_$(host_os)) $($(1)_ldflags_$(host_os)_$(release_type))
-$(1)_ldflags+=$($(1)_ldflags_$(host_arch)_$(host_os)) $($(1)_ldflags_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_build_opts+=$$($(1)_build_opts_$(release_type))
-$(1)_build_opts+=$$($(1)_build_opts_$(host_arch)) $$($(1)_build_opts_$(host_arch)_$(release_type))
-$(1)_build_opts+=$$($(1)_build_opts_$(host_os)) $$($(1)_build_opts_$(host_os)_$(release_type))
-$(1)_build_opts+=$$($(1)_build_opts_$(host_arch)_$(host_os)) $$($(1)_build_opts_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_config_opts+=$$($(1)_config_opts_$(release_type))
-$(1)_config_opts+=$$($(1)_config_opts_$(host_arch)) $$($(1)_config_opts_$(host_arch)_$(release_type))
-$(1)_config_opts+=$$($(1)_config_opts_$(host_os)) $$($(1)_config_opts_$(host_os)_$(release_type))
-$(1)_config_opts+=$$($(1)_config_opts_$(host_arch)_$(host_os)) $$($(1)_config_opts_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_config_env+=$$($(1)_config_env_$(release_type))
-$(1)_config_env+=$($(1)_config_env_$(host_arch)) $($(1)_config_env_$(host_arch)_$(release_type))
-$(1)_config_env+=$($(1)_config_env_$(host_os)) $($(1)_config_env_$(host_os)_$(release_type))
-$(1)_config_env+=$($(1)_config_env_$(host_arch)_$(host_os)) $($(1)_config_env_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_build_env+=$$($(1)_build_env_$(release_type))
-$(1)_build_env+=$($(1)_build_env_$(host_arch)) $($(1)_build_env_$(host_arch)_$(release_type))
-$(1)_build_env+=$($(1)_build_env_$(host_os)) $($(1)_build_env_$(host_os)_$(release_type))
-$(1)_build_env+=$($(1)_build_env_$(host_arch)_$(host_os)) $($(1)_build_env_$(host_arch)_$(host_os)_$(release_type))
-
-$(1)_config_env+=PKG_CONFIG_LIBDIR=$($($(1)_type)_prefix)/lib/pkgconfig
-$(1)_config_env+=PKG_CONFIG_PATH=$($($(1)_type)_prefix)/share/pkgconfig
-$(1)_config_env+=PATH="$(build_prefix)/bin:$(PATH)"
-$(1)_build_env+=PATH="$(build_prefix)/bin:$(PATH)"
-$(1)_stage_env+=PATH="$(build_prefix)/bin:$(PATH)"
-$(1)_autoconf=./configure --host=$($($(1)_type)_host) --prefix=$($($(1)_type)_prefix) $$($(1)_config_opts) CC="$$($(1)_cc)" CXX="$$($(1)_cxx)"
-
-ifneq ($(1),libusb)
-$(1)_autoconf += --disable-dependency-tracking
-endif
-ifneq ($($(1)_nm),)
-$(1)_autoconf += NM="$$($(1)_nm)"
-endif
-ifneq ($($(1)_ranlib),)
-$(1)_autoconf += RANLIB="$$($(1)_ranlib)"
-endif
-ifneq ($($(1)_ar),)
-$(1)_autoconf += AR="$$($(1)_ar)"
-endif
-ifneq ($($(1)_arflags),)
-$(1)_autoconf += ARFLAGS="$$($(1)_arflags)"
-endif
-ifneq ($($(1)_cflags),)
-$(1)_autoconf += CFLAGS="$$($(1)_cflags)"
-endif
-ifneq ($($(1)_cxxflags),)
-$(1)_autoconf += CXXFLAGS="$$($(1)_cxxflags)"
-endif
-ifneq ($($(1)_cppflags),)
-$(1)_autoconf += CPPFLAGS="$$($(1)_cppflags)"
-endif
-ifneq ($($(1)_ldflags),)
-$(1)_autoconf += LDFLAGS="$$($(1)_ldflags)"
-endif
-endef
-
-define int_add_cmds
-$($(1)_fetched):
-	$(AT)mkdir -p $$(@D) $(SOURCES_PATH)
-	$(AT)rm -f $$@
-	$(AT)touch $$@
-	$(AT)cd $$(@D); $(call $(1)_fetch_cmds,$(1))
-	$(AT)cd $($(1)_source_dir); $(foreach source,$($(1)_all_sources),$(build_SHA256SUM) $(source) >> $$(@);)
-	$(AT)touch $$@
-$($(1)_extracted): | $($(1)_fetched)
-	$(AT)echo Extracting $(1)...
-	$(AT)mkdir -p $$(@D)
-	$(AT)cd $$(@D); $(call $(1)_extract_cmds,$(1))
-	$(AT)touch $$@
-$($(1)_preprocessed): | $($(1)_dependencies) $($(1)_extracted)
-	$(AT)echo Preprocessing $(1)...
-	$(AT)mkdir -p $$(@D) $($(1)_patch_dir)
-	$(AT)$(foreach patch,$($(1)_patches),cd $(PATCHES_PATH)/$(1); cp $(patch) $($(1)_patch_dir) ;)
-	$(AT)cd $$(@D); $(call $(1)_preprocess_cmds, $(1))
-	$(AT)touch $$@
-$($(1)_configured): | $($(1)_preprocessed)
-	$(AT)echo Configuring $(1)...
-	$(AT)rm -rf $(host_prefix); mkdir -p $(host_prefix)/lib; cd $(host_prefix); $(foreach package,$($(1)_all_dependencies), tar xf $($(package)_cached); )
-	$(AT)mkdir -p $$(@D)
-	$(AT)+cd $$(@D); $($(1)_config_env) $(call $(1)_config_cmds, $(1))
-	$(AT)touch $$@
-$($(1)_built): | $($(1)_configured)
-	$(AT)echo Building $(1)...
-	$(AT)mkdir -p $$(@D)
-	$(AT)+cd $$(@D); $($(1)_build_env) $(call $(1)_build_cmds, $(1))
-	$(AT)touch $$@
-$($(1)_staged): | $($(1)_built)
-	$(AT)echo Staging $(1)...
-	$(AT)mkdir -p $($(1)_staging_dir)/$(host_prefix)
-	$(AT)cd $($(1)_build_dir); $($(1)_stage_env) $(call $(1)_stage_cmds, $(1))
-	$(AT)rm -rf $($(1)_extract_dir)
-	$(AT)touch $$@
-$($(1)_postprocessed): | $($(1)_staged)
-	$(AT)echo Postprocessing $(1)...
-	$(AT)cd $($(1)_staging_prefix_dir); $(call $(1)_postprocess_cmds)
-	$(AT)touch $$@
-$($(1)_cached): | $($(1)_dependencies) $($(1)_postprocessed)
-	$(AT)echo Caching $(1)...
-	$(AT)cd $$($(1)_staging_dir)/$(host_prefix); find . | sort | tar --no-recursion -czf $$($(1)_staging_dir)/$$(@F) -T -
-	$(AT)mkdir -p $$(@D)
-	$(AT)rm -rf $$(@D) && mkdir -p $$(@D)
-	$(AT)mv $$($(1)_staging_dir)/$$(@F) $$(@)
-	$(AT)rm -rf $($(1)_staging_dir)
-$($(1)_cached_checksum): $($(1)_cached)
-	$(AT)cd $$(@D); $(build_SHA256SUM) $$(<F) > $$(@)
-
-.PHONY: $(1)
-$(1): | $($(1)_cached_checksum)
-.SECONDARY: $($(1)_cached) $($(1)_postprocessed) $($(1)_staged) $($(1)_built) $($(1)_configured) $($(1)_preprocessed) $($(1)_extracted) $($(1)_fetched)
-
-endef
-
-stages = fetched extracted preprocessed configured built staged postprocessed cached cached_checksum
-
-define ext_add_stages
-$(foreach stage,$(stages),
-          $(1)_$(stage): $($(1)_$(stage))
-          .PHONY: $(1)_$(stage))
-endef
-
-# These functions create the build targets for each package. They must be
-# broken down into small steps so that each part is done for all packages
-# before moving on to the next step. Otherwise, a package's info
-# (build-id for example) would only be available to another package if it
-# happened to be computed already.
-
-#set the type for host/build packages.
-$(foreach native_package,$(native_packages),$(eval $(native_package)_type=build))
-$(foreach package,$(packages),$(eval $(package)_type=$(host_arch)_$(host_os)))
-
-#set overridable defaults
-$(foreach package,$(all_packages),$(eval $(call int_vars,$(package))))
-
-#include package files
-$(foreach package,$(all_packages),$(eval include packages/$(package).mk))
-
-#compute a hash of all files that comprise this package's build recipe
-$(foreach package,$(all_packages),$(eval $(call int_get_build_recipe_hash,$(package))))
-
-#generate a unique id for this package, incorporating its dependencies as well
-$(foreach package,$(all_packages),$(eval $(call int_get_build_id,$(package))))
-
-#compute final vars after reading package vars
-$(foreach package,$(all_packages),$(eval $(call int_config_attach_build_config,$(package))))
-
-#create build targets
-$(foreach package,$(all_packages),$(eval $(call int_add_cmds,$(package))))
-
-#special exception: if a toolchain package exists, all non-native packages depend on it
-$(foreach package,$(packages),$(eval $($(package)_unpacked): |$($($(host_arch)_$(host_os)_native_toolchain)_cached) ))

contrib/depends/hosts/android.mk

@@ -1,22 +0,0 @@
-ANDROID_API=21
-
-ifeq ($(host_arch),arm)
-host_toolchain=arm-linux-androideabi-
-endif
-
-android_CC=$(host_toolchain)clang
-android_CXX=$(host_toolchain)clang++
-android_RANLIB=:
-
-android_CFLAGS=-pipe
-android_CXXFLAGS=$(android_CFLAGS)
-android_ARFLAGS=crsD
-
-android_release_CFLAGS=-O2
-android_release_CXXFLAGS=$(android_release_CFLAGS)
-
-android_debug_CFLAGS=-g -O0
-android_debug_CXXFLAGS=$(android_debug_CFLAGS)
-
-android_native_toolchain=android_ndk
-

contrib/depends/hosts/darwin.mk

@@ -1,21 +0,0 @@
-OSX_MIN_VERSION=10.8
-LD64_VERSION=609
-ifeq (aarch64, $(host_arch))
-CC_target=arm64-apple-$(host_os)
-else
-CC_target=$(host)
-endif
-darwin_CC=clang -target $(CC_target) -mmacosx-version-min=$(OSX_MIN_VERSION) --sysroot $(host_prefix)/native/SDK/ -mlinker-version=$(LD64_VERSION) -B$(host_prefix)/native/bin/$(host)-
-darwin_CXX=clang++ -target $(CC_target) -mmacosx-version-min=$(OSX_MIN_VERSION) --sysroot $(host_prefix)/native/SDK/ -mlinker-version=$(LD64_VERSION) -stdlib=libc++ -B$(host_prefix)/native/bin/$(host)-
-
-darwin_CFLAGS=-pipe
-darwin_CXXFLAGS=$(darwin_CFLAGS)
-darwin_ARFLAGS=cr
-
-darwin_release_CFLAGS=-O1
-darwin_release_CXXFLAGS=$(darwin_release_CFLAGS)
-
-darwin_debug_CFLAGS=-O1
-darwin_debug_CXXFLAGS=$(darwin_debug_CFLAGS)
-
-darwin_native_toolchain=native_cctools darwin_sdk

contrib/depends/hosts/default.mk

@@ -1,26 +0,0 @@
-default_host_CC = $(host_toolchain)gcc
-default_host_CXX = $(host_toolchain)g++
-default_host_AR = $(host_toolchain)ar
-default_host_RANLIB = $(host_toolchain)ranlib
-default_host_STRIP = $(host_toolchain)strip
-default_host_LIBTOOL = $(host_toolchain)libtool
-default_host_INSTALL_NAME_TOOL = $(host_toolchain)install_name_tool
-default_host_OTOOL = $(host_toolchain)otool
-default_host_NM = $(host_toolchain)nm
-
-define add_host_tool_func
-$(host_os)_$1?=$$(default_host_$1)
-$(host_arch)_$(host_os)_$1?=$$($(host_os)_$1)
-$(host_arch)_$(host_os)_$(release_type)_$1?=$$($(host_os)_$1)
-host_$1=$$($(host_arch)_$(host_os)_$1)
-endef
-
-define add_host_flags_func
-$(host_arch)_$(host_os)_$1 += $($(host_os)_$1)
-$(host_arch)_$(host_os)_$(release_type)_$1 += $($(host_os)_$(release_type)_$1)
-host_$1 = $$($(host_arch)_$(host_os)_$1)
-host_$(release_type)_$1 = $$($(host_arch)_$(host_os)_$(release_type)_$1)
-endef
-
-$(foreach tool,CC CXX AR RANLIB STRIP NM LIBTOOL OTOOL INSTALL_NAME_TOOL,$(eval $(call add_host_tool_func,$(tool))))
-$(foreach flags,CFLAGS CXXFLAGS ARFLAGS CPPFLAGS LDFLAGS, $(eval $(call add_host_flags_func,$(flags))))

contrib/depends/hosts/freebsd.mk

@@ -1,18 +0,0 @@
-freebsd_CC=clang-8
-freebsd_CXX=clang++-8
-freebsd_AR=ar
-freebsd_RANLIB=ranlib
-freebsd_NM=nm
-
-freebsd_CFLAGS=-pipe
-freebsd_CXXFLAGS=$(freebsd_CFLAGS)
-freebsd_ARFLAGS=cr
-
-freebsd_release_CFLAGS=-O2
-freebsd_release_CXXFLAGS=$(freebsd_release_CFLAGS)
-
-freebsd_debug_CFLAGS=-g -O0
-freebsd_debug_CXXFLAGS=$(freebsd_debug_CFLAGS)
-
-freebsd_native_toolchain=freebsd_base
-

contrib/depends/hosts/linux.mk

@@ -1,32 +0,0 @@
-linux_CFLAGS=-pipe
-linux_CXXFLAGS=$(linux_CFLAGS)
-linux_ARFLAGS=cr
-
-linux_release_CFLAGS=-O2
-linux_release_CXXFLAGS=$(linux_release_CFLAGS)
-
-linux_debug_CFLAGS=-O1
-linux_debug_CXXFLAGS=$(linux_debug_CFLAGS)
-
-linux_debug_CPPFLAGS=-D_GLIBCXX_DEBUG -D_GLIBCXX_DEBUG_PEDANTIC
-
-ifeq (86,$(findstring 86,$(build_arch)))
-i686_linux_CC=gcc -m32
-i686_linux_CXX=g++ -m32
-i686_linux_AR=ar
-i686_linux_RANLIB=ranlib
-i686_linux_NM=nm
-i686_linux_STRIP=strip
-
-x86_64_linux_CC=gcc -m64
-x86_64_linux_CXX=g++ -m64
-x86_64_linux_AR=ar
-x86_64_linux_RANLIB=ranlib
-x86_64_linux_NM=nm
-x86_64_linux_STRIP=strip
-else
-i686_linux_CC=$(default_host_CC) -m32
-i686_linux_CXX=$(default_host_CXX) -m32
-x86_64_linux_CC=$(default_host_CC) -m64
-x86_64_linux_CXX=$(default_host_CXX) -m64
-endif

contrib/depends/hosts/mingw32.mk

@@ -1,11 +0,0 @@
-mingw32_CFLAGS=-pipe
-mingw32_CXXFLAGS=$(mingw32_CFLAGS)
-mingw32_ARFLAGS=cr
-
-mingw32_release_CFLAGS=-O2
-mingw32_release_CXXFLAGS=$(mingw32_release_CFLAGS)
-
-mingw32_debug_CFLAGS=-O1
-mingw32_debug_CXXFLAGS=$(mingw32_debug_CFLAGS)
-
-mingw32_debug_CPPFLAGS=-D_GLIBCXX_DEBUG -D_GLIBCXX_DEBUG_PEDANTIC

contrib/depends/packages.md

@@ -1,165 +0,0 @@
-Each recipe consists of 3 main parts: defining identifiers, setting build
-variables, and defining build commands.
-
-The package "mylib" will be used here as an example
-
-General tips:
-- mylib_foo is written as $(package)_foo in order to make recipes more similar.
-
-## Identifiers
-Each package is required to define at least these variables:
-
-```
-$(package)_version:
-Version of the upstream library or program. If there is no version, a
-placeholder such as 1.0 can be used.
-
-$(package)_download_path:
-Location of the upstream source, without the file-name. Usually http or
-ftp.
-
-$(package)_file_name:
-The upstream source filename available at the download path.
-
-$(package)_sha256_hash:
-The sha256 hash of the upstream file
-```
-
-These variables are optional:
-
-```
-$(package)_build_subdir:
-cd to this dir before running configure/build/stage commands.
-
-$(package)_download_file:
-The file-name of the upstream source if it differs from how it should be
-stored locally. This can be used to avoid storing file-names with strange
-characters.
-
-$(package)_dependencies:
-Names of any other packages that this one depends on.
-
-$(package)_patches:
-Filenames of any patches needed to build the package
-
-$(package)_extra_sources:
-Any extra files that will be fetched via $(package)_fetch_cmds. These are
-specified so that they can be fetched and verified via 'make download'.
-```
-
-
-## Build Variables:
-After defining the main identifiers, build variables may be added or customized
-before running the build commands. They should be added to a function called
-$(package)_set_vars. For example:
-
-```
-define $(package)_set_vars
-...
-endef
-```
-
-Most variables can be prefixed with the host, architecture, or both, to make
-the modifications specific to that case. For example:
-
-```
-Universal:     $(package)_cc=gcc
-Linux only:    $(package)_linux_cc=gcc
-x86_64 only:       $(package)_x86_64_cc = gcc
-x86_64 linux only: $(package)_x86_64_linux_cc = gcc
-```
-
-These variables may be set to override or append their default values.
-
-```
-$(package)_cc
-$(package)_cxx
-$(package)_objc
-$(package)_objcxx
-$(package)_ar
-$(package)_ranlib
-$(package)_libtool
-$(package)_nm
-$(package)_cflags
-$(package)_cxxflags
-$(package)_ldflags
-$(package)_cppflags
-$(package)_config_env
-$(package)_build_env
-$(package)_stage_env
-$(package)_build_opts
-$(package)_config_opts
-```
-
-The `*_env` variables are used to add environment variables to the respective
-commands.
-
-Many variables respect a debug/release suffix as well, in order to use them for
-only the appropriate build config. For example:
-
-```
-$(package)_cflags_release = -O3
-$(package)_cflags_i686_debug = -g
-$(package)_config_opts_release = --disable-debug
-```
-
-These will be used in addition to the options that do not specify
-debug/release. All builds are considered to be release unless DEBUG=1 is set by
-the user. Other variables may be defined as needed.
-
-## Build commands:
-
-For each build, a unique build dir and staging dir are created. For example,
-`work/build/mylib/1.0-1adac830f6e` and `work/staging/mylib/1.0-1adac830f6e`.
-
-The following build commands are available for each recipe:
-
-```
-$(package)_fetch_cmds:
-Runs from: build dir
-Fetch the source file. If undefined, it will be fetched and verified
-against its hash.
-
-$(package)_extract_cmds:
-Runs from: build dir
-Verify the source file against its hash and extract it. If undefined, the
-source is assumed to be a tarball.
-
-$(package)_preprocess_cmds:
-Runs from: build dir/$(package)_build_subdir
-Preprocess the source as necessary. If undefined, does nothing.
-
-$(package)_config_cmds:
-Runs from: build dir/$(package)_build_subdir
-Configure the source. If undefined, does nothing.
-
-$(package)_build_cmds:
-Runs from: build dir/$(package)_build_subdir
-Build the source. If undefined, does nothing.
-
-$(package)_stage_cmds:
-Runs from: build dir/$(package)_build_subdir
-Stage the build results. If undefined, does nothing.
-```
-
-The following variables are available for each recipe:
-
-```    
-$(1)_staging_dir: package's destination sysroot path
-$(1)_staging_prefix_dir: prefix path inside of the package's staging dir
-$(1)_extract_dir: path to the package's extracted sources
-$(1)_build_dir: path where configure/build/stage commands will be run
-$(1)_patch_dir: path where the package's patches (if any) are found
-```
-
-Notes on build commands:
-
-For packages built with autotools, `$($(package)_autoconf)` can be used in the
-configure step to (usually) correctly configure automatically. Any
-`$($(package)_config_opts`) will be appended.
-
-Most autotools projects can be properly staged using:
-
-```bash
-$(MAKE) DESTDIR=$($(package)_staging_dir) install
-```

contrib/depends/packages/android_ndk.mk

@@ -1,22 +0,0 @@
-package=android_ndk
-$(package)_version=17b
-$(package)_download_path=https://dl.google.com/android/repository/
-$(package)_file_name=android-ndk-r$($(package)_version)-linux-x86_64.zip
-$(package)_sha256_hash=5dfbbdc2d3ba859fed90d0e978af87c71a91a5be1f6e1c40ba697503d48ccecd
-
-define $(package)_set_vars
-$(package)_config_opts_arm=--arch arm
-$(package)_config_opts_aarch64=--arch arm64
-endef
-
-define $(package)_extract_cmds
-  echo $($(package)_sha256_hash) $($(1)_source_dir)/$($(package)_file_name) | sha256sum -c &&\
-  unzip -q $($(1)_source_dir)/$($(package)_file_name)
-endef
-
-define $(package)_stage_cmds
-  android-ndk-r$($(package)_version)/build/tools/make_standalone_toolchain.py --api 21 \
-    --install-dir $(build_prefix) --stl=libc++ $($(package)_config_opts) &&\
-  mv $(build_prefix) $($(package)_staging_dir)/$(host_prefix)
-endef
-

contrib/depends/packages/boost.mk

@@ -1,47 +0,0 @@
-package=boost                                                                                                                                                                                                                      
-$(package)_version=1_64_0
-$(package)_download_path=https://downloads.sourceforge.net/project/boost/boost/1.64.0/
-$(package)_file_name=$(package)_$($(package)_version).tar.bz2
-$(package)_sha256_hash=7bcc5caace97baa948931d712ea5f37038dbb1c5d89b43ad4def4ed7cb683332
-$(package)_dependencies=libiconv
-$(package)_patches=fix_aroptions.patch fix_arm_arch.patch
-
-define $(package)_set_vars
-$(package)_config_opts_release=variant=release
-$(package)_config_opts_debug=variant=debug
-$(package)_config_opts=--layout=tagged --build-type=complete --user-config=user-config.jam
-$(package)_config_opts+=threading=multi link=static -sNO_BZIP2=1 -sNO_ZLIB=1
-$(package)_config_opts_linux=threadapi=pthread runtime-link=shared
-$(package)_config_opts_android=threadapi=pthread runtime-link=static target-os=android
-$(package)_config_opts_darwin=--toolset=darwin runtime-link=shared
-$(package)_config_opts_mingw32=binary-format=pe target-os=windows threadapi=win32 runtime-link=static
-$(package)_config_opts_x86_64_mingw32=address-model=64
-$(package)_config_opts_i686_mingw32=address-model=32
-$(package)_config_opts_i686_linux=address-model=32 architecture=x86
-$(package)_toolset_$(host_os)=gcc
-$(package)_archiver_$(host_os)=$($(package)_ar)
-$(package)_toolset_darwin=darwin
-$(package)_archiver_darwin=$($(package)_libtool)
-$(package)_config_libraries=chrono,filesystem,program_options,system,thread,test,date_time,regex,serialization,locale
-$(package)_cxxflags=-std=c++11
-$(package)_cxxflags_linux=-fPIC
-$(package)_cxxflags_freebsd=-fPIC
-endef
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/fix_aroptions.patch &&\
-  patch -p1 < $($(package)_patch_dir)/fix_arm_arch.patch &&\
-  echo "using $(boost_toolset_$(host_os)) : : $($(package)_cxx) : <cxxflags>\"$($(package)_cxxflags) $($(package)_cppflags)\" <linkflags>\"$($(package)_ldflags)\" <archiver>\"$(boost_archiver_$(host_os))\" <arflags>\"$($(package)_arflags)\" <striper>\"$(host_STRIP)\"  <ranlib>\"$(host_RANLIB)\" <rc>\"$(host_WINDRES)\" : ;" > user-config.jam
-endef
-
-define $(package)_config_cmds
-  ./bootstrap.sh --without-icu --with-libraries=$(boost_config_libraries)
-endef
-
-define $(package)_build_cmds
-  ./b2 -d2 -j2 -d1 --prefix=$($(package)_staging_prefix_dir) $($(package)_config_opts) stage
-endef
-
-define $(package)_stage_cmds
-  ./b2 -d0 -j4 --prefix=$($(package)_staging_prefix_dir) $($(package)_config_opts) install
-endef

contrib/depends/packages/darwin_sdk.mk

@@ -1,10 +0,0 @@
-package=darwin_sdk
-$(package)_version=11.1
-$(package)_download_path=https://github.com/phracker/MacOSX-SDKs/releases/download/11.3/
-$(package)_file_name=MacOSX$($(package)_version).sdk.tar.xz
-$(package)_sha256_hash=68797baaacb52f56f713400de306a58a7ca00b05c3dc6d58f0a8283bcac721f8
-
-define $(package)_stage_cmds
-  mkdir -p $($(package)_staging_dir)/$(host_prefix)/native/SDK &&\
-  mv * $($(package)_staging_dir)/$(host_prefix)/native/SDK
-endef

contrib/depends/packages/eudev.mk

@@ -1,30 +0,0 @@
-package=eudev
-$(package)_version=v3.2.6
-$(package)_download_path=https://github.com/gentoo/eudev/archive/
-$(package)_download_file=$($(package)_version).tar.gz
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=a96ecb8637667897b8bd4dee4c22c7c5f08b327be45186e912ce6bc768385852
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-gudev --disable-introspection --disable-hwdb --disable-manpages --disable-shared
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmd
-  $(MAKE)
-endef
-
-define $(package)_preprocess_cmds
-  cd $($(package)_build_subdir); autoreconf -f -i
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef

contrib/depends/packages/expat.mk

@@ -1,28 +0,0 @@
-package=expat
-$(package)_version=2.4.1
-$(package)_download_path=https://github.com/libexpat/libexpat/releases/download/R_2_4_1
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=2f9b6a580b94577b150a7d5617ad4643a4301a6616ff459307df3e225bcfbf40
-
-define $(package)_set_vars
-$(package)_config_opts=--enable-static
-$(package)_config_opts=--disable-shared
-$(package)_config_opts+=--prefix=$(host_prefix)
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/freebsd_base.mk

@@ -1,23 +0,0 @@
-package=freebsd_base
-$(package)_version=11.3
-$(package)_download_path=https://download.freebsd.org/ftp/releases/amd64/$($(package)_version)-RELEASE/
-$(package)_download_file=base.txz
-$(package)_file_name=freebsd-base-$($(package)_version).txz
-$(package)_sha256_hash=4599023ac136325b86f2fddeec64c1624daa83657e40b00b2ef944c81463a4ff
-
-define $(package)_extract_cmds
-  echo $($(package)_sha256_hash) $($(1)_source_dir)/$($(package)_file_name) | sha256sum -c &&\
-  tar xf $($(1)_source_dir)/$($(package)_file_name) ./lib/ ./usr/lib/ ./usr/include/
-endef
-
-define $(package)_build_cmds
-  mkdir bin &&\
-  echo "#!/bin/sh\n\nexec /usr/bin/clang-8 -target x86_64-unknown-freebsd$($(package)_version) --sysroot=$(host_prefix)/native $$$$""@" > bin/clang-8 &&\
-  echo "#!/bin/sh\n\nexec /usr/bin/clang++-8 -target x86_64-unknown-freebsd$($(package)_version) --sysroot=$(host_prefix)/native $$$$""@" > bin/clang++-8 &&\
-  chmod 755 bin/*
-endef
-
-define $(package)_stage_cmds
-  mkdir $($(package)_staging_dir)/$(host_prefix)/native &&\
-  mv bin lib usr $($(package)_staging_dir)/$(host_prefix)/native
-endef

contrib/depends/packages/graphviz.mk

@@ -1,30 +0,0 @@
-package=graphviz
-$(package)_version=2.40.1
-$(package)_download_path=www.graphviz.org/pub/graphviz/stable/SOURCES/
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=ca5218fade0204d59947126c38439f432853543b0818d9d728c589dfe7f3a421
-
-define $(package)_preprocess_cmds
-  ./autogen.sh
-endef
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --enable-multibye --without-purify --without-curses
-  $(package)_config_opts_release=--disable-debug-mode
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-endef

contrib/depends/packages/gtest.mk

@@ -1,39 +0,0 @@
-package=gtest
-$(package)_version=1.8.1
-$(package)_download_path=https://github.com/google/googletest/archive/
-$(package)_download_file=release-$($(package)_version).tar.gz
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=9bf1fe5182a604b4135edc1a425ae356c9ad15e9b23f9f12a02e80184c3a249c
-$(package)_cxxflags=-std=c++11
-$(package)_cxxflags_linux=-fPIC
-
-define $(package)_config_cmds
-  cd googletest && \
-    CC="$(host_prefix)/native/bin/$($(package)_cc)" \
-    CXX="$(host_prefix)/native/bin/$($(package)_cxx)" \
-    AR="$(host_prefix)/native/bin/$($(package)_ar)" \
-    RANLIB="$(host_prefix)/native/bin/$($(package)_ranlib)" \
-    LIBTOOL="$(host_prefix)/native/bin/$($(package)_libtool)" \
-    CXXFLAGS="$($(package)_cxxflags)" \
-    CCFLAGS="$($(package)_ccflags)" \
-    CPPFLAGS="$($(package)_cppflags)" \
-    CFLAGS="$($(package)_cflags) $($(package)_cppflags)" \
-    LDLAGS="$($(package)_ldflags)" \
-  cmake -DCMAKE_INSTALL_PREFIX=$(build_prefix) \
-    -DTOOLCHAIN_PREFIX=$(host_toolchain) \
-    -DCMAKE_AR="$(host_prefix)/native/bin/$($(package)_ar)" \
-    -DCMAKE_RANLIB="$(host_prefix)/native/bin/$($(package)_ranlib)" \
-    -DCMAKE_CXX_FLAGS_DEBUG=ON
-endef
-# -DCMAKE_TOOLCHAIN_FILE=$(HOST)/share/toolchain.cmake
-
-define $(package)_build_cmds
-  cd googletest && CC="$(host_prefix)/native/bin/$($(package)_cc)" $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  mkdir $($(package)_staging_prefix_dir)/lib $($(package)_staging_prefix_dir)/include &&\
-  cp googletest/libgtest.a $($(package)_staging_prefix_dir)/lib/ &&\
-  cp googletest/libgtest_main.a $($(package)_staging_prefix_dir)/lib/ &&\
-  cp -a googletest/include/* $($(package)_staging_prefix_dir)/include/
-endef

contrib/depends/packages/hidapi.mk

@@ -1,38 +0,0 @@
-package=hidapi
-$(package)_version=0.13.1
-$(package)_download_path=https://github.com/libusb/hidapi/archive/refs/tags
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=476a2c9a4dc7d1fc97dd223b84338dbea3809a84caea2dcd887d9778725490e3
-$(package)_linux_dependencies=libusb eudev
-$(package)_patches=missing_win_include.patch
-
-define $(package)_set_vars
-$(package)_config_opts=--enable-static --disable-shared
-$(package)_config_opts+=--prefix=$(host_prefix)
-$(package)_config_opts_linux+=libudev_LIBS="-L$(host_prefix)/lib -ludev"
-$(package)_config_opts_linux+=libudev_CFLAGS=-I$(host_prefix)/include
-$(package)_config_opts_linux+=libusb_LIBS="-L$(host_prefix)/lib -lusb-1.0"
-$(package)_config_opts_linux+=libusb_CFLAGS=-I$(host_prefix)/include/libusb-1.0
-$(package)_config_opts_linux+=--with-pic
-endef
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/missing_win_include.patch && ./bootstrap
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/icu4c.mk

@@ -1,27 +0,0 @@
-package=icu4c
-$(package)_version=55.2
-$(package)_download_path=https://github.com/unicode-org/icu/releases/download/release-55-2/
-$(package)_file_name=$(package)-55_2-src.tgz
-$(package)_sha256_hash=eda2aa9f9c787748a2e2d310590720ca8bcc6252adf6b4cfb03b65bef9d66759
-$(package)_patches=icu-001-dont-build-static-dynamic-twice.patch
-
-define $(package)_set_vars
-  $(package)_build_opts=CFLAGS="$($(package)_cflags) $($(package)_cppflags) -DU_USING_ICU_NAMESPACE=0 -DU_STATIC_IMPLEMENTATION -DU_COMBINED_IMPLEMENTATION -fPIC -DENABLE_STATIC=YES -DPGKDATA_MODE=static"
-endef
-
-define $(package)_config_cmds
-  patch -p1 < $($(package)_patch_dir)/icu-001-dont-build-static-dynamic-twice.patch &&\
-  mkdir builda &&\
-  mkdir buildb &&\
-  cd builda &&\
-  sh ../source/runConfigureICU Linux &&\
-  make &&\
-  cd ../buildb &&\
-  sh ../source/runConfigureICU MinGW --enable-static=yes --disable-shared --disable-layout --disable-layoutex --disable-tests --disable-samples --prefix=$(host_prefix) --with-cross-build=`pwd`/../builda &&\
-  $(MAKE) $($(package)_build_opts)
-endef
-
-define $(package)_stage_cmds
-  cd buildb &&\
-  $(MAKE) $($(package)_build_opts) DESTDIR=$($(package)_staging_dir) install lib/*
-endef

contrib/depends/packages/libICE.mk

@@ -1,23 +0,0 @@
-package=libICE
-$(package)_version=1.0.9
-$(package)_download_path=https://xorg.freedesktop.org/releases/individual/lib/
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=8f7032f2c1c64352b5423f6b48a8ebdc339cc63064af34d66a6c9aa79759e202
-$(package)_dependencies=xtrans xproto
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-static --disable-docs --disable-specs --without-xsltproc
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef

contrib/depends/packages/libSM.mk

@@ -1,23 +0,0 @@
-package=libSM
-$(package)_version=1.2.2
-$(package)_download_path=https://xorg.freedesktop.org/releases/individual/lib/
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=0baca8c9f5d934450a70896c4ad38d06475521255ca63b717a6510fdb6e287bd
-$(package)_dependencies=xtrans xproto libICE
-
-define $(package)_set_vars
-  $(package)_config_opts=--without-libuuid  --without-xsltproc  --disable-docs --disable-static
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef

contrib/depends/packages/libiconv.mk

@@ -1,35 +0,0 @@
-package=libiconv
-$(package)_version=1.15
-$(package)_download_path=https://ftp.gnu.org/gnu/libiconv
-$(package)_file_name=libiconv-$($(package)_version).tar.gz
-$(package)_sha256_hash=ccf536620a45458d26ba83887a983b96827001e92a13847b45e4925cc8913178
-$(package)_patches=fix-whitespace.patch
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-nls
-  $(package)_config_opts=--enable-static
-  $(package)_config_opts=--disable-shared
-  $(package)_config_opts_linux=--with-pic
-  $(package)_config_opts_freebsd=--with-pic
-endef
-
-define $(package)_preprocess_cmds
-  cp -f $(BASEDIR)/config.guess $(BASEDIR)/config.sub build-aux/ &&\
-  patch -p1 < $($(package)_patch_dir)/fix-whitespace.patch
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef

contrib/depends/packages/libusb.mk

@@ -1,39 +0,0 @@
-package=libusb
-$(package)_version=1.0.26
-$(package)_download_path=https://github.com/libusb/libusb/releases/download/v$($(package)_version)
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=12ce7a61fc9854d1d2a1ffe095f7b5fac19ddba095c259e6067a46500381b5a5
-
-define $(package)_preprocess_cmds
-  autoreconf -i
-endef
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared
-  $(package)_config_opts_linux=--with-pic --disable-udev
-  $(package)_config_opts_mingw32=--disable-udev
-  $(package)_config_opts_darwin=--disable-udev
-endef
-
-ifneq ($(host_os),darwin)
-  define $(package)_config_cmds
-    cp -f $(BASEDIR)/config.guess config.guess &&\
-    cp -f $(BASEDIR)/config.sub config.sub &&\
-    $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-  endef
-else
-  define $(package)_config_cmds
-    $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-  endef
-endif
-
-define $(package)_build_cmd
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds  cp -f lib/libusb-1.0.a lib/libusb.a
-endef

contrib/depends/packages/native_biplist.mk

@@ -1,20 +0,0 @@
-package=native_biplist
-$(package)_version=0.9
-$(package)_download_path=https://pypi.python.org/packages/source/b/biplist
-$(package)_file_name=biplist-$($(package)_version).tar.gz
-$(package)_sha256_hash=b57cadfd26e4754efdf89e9e37de87885f9b5c847b2615688ca04adfaf6ca604
-$(package)_install_libdir=$(build_prefix)/lib/python/dist-packages
-$(package)_patches=sorted_list.patch
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/sorted_list.patch
-endef
-
-define $(package)_build_cmds
-    python setup.py build
-endef
-
-define $(package)_stage_cmds
-    mkdir -p $($(package)_install_libdir) && \
-    python setup.py install --root=$($(package)_staging_dir) --prefix=$(build_prefix) --install-lib=$($(package)_install_libdir)
-endef

contrib/depends/packages/native_ccache.mk

@@ -1,25 +0,0 @@
-package=native_ccache
-$(package)_version=3.3.4
-$(package)_download_path=https://samba.org/ftp/ccache
-$(package)_file_name=ccache-$($(package)_version).tar.bz2
-$(package)_sha256_hash=fa9d7f38367431bc86b19ad107d709ca7ecf1574fdacca01698bdf0a47cd8567
-
-define $(package)_set_vars
-$(package)_config_opts=
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm -rf lib include
-endef

contrib/depends/packages/native_cctools.mk

@@ -1,28 +0,0 @@
-package=native_cctools
-$(package)_version=04663295d0425abfac90a42440a7ec02d7155fea
-$(package)_download_path=https://github.com/tpoechtrager/cctools-port/archive
-$(package)_download_file=$($(package)_version).tar.gz
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=70a7189418c2086d20c299c5d59250cf5940782c778892ccc899c66516ed240e
-$(package)_build_subdir=cctools
-$(package)_dependencies=native_clang native_libtapi
-
-define $(package)_set_vars
-$(package)_config_opts=--target=$(host) --disable-lto-support --with-libtapi=$(host_prefix)
-$(package)_ldflags+=-Wl,-rpath=\\$$$$$$$$\$$$$$$$$ORIGIN/../lib
-$(package)_cc=$(host_prefix)/native/bin/clang
-$(package)_cxx=$(host_prefix)/native/bin/clang++
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install && \
-  cp $($(package)_extract_dir)/cctools/misc/install_name_tool $($(package)_staging_prefix_dir)/bin/
-endef

contrib/depends/packages/native_cdrkit.mk

@@ -1,26 +0,0 @@
-package=native_cdrkit
-$(package)_version=1.1.11
-$(package)_download_path=https://distro.ibiblio.org/fatdog/source/600/c
-$(package)_file_name=cdrkit-$($(package)_version).tar.bz2
-$(package)_sha256_hash=b50d64c214a65b1a79afe3a964c691931a4233e2ba605d793eb85d0ac3652564
-$(package)_patches=cdrkit-deterministic.patch
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/cdrkit-deterministic.patch
-endef
-
-define $(package)_config_cmds
-  cmake -DCMAKE_INSTALL_PREFIX=$(build_prefix)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) genisoimage
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) -C genisoimage install
-endef
-
-define $(package)_postprocess_cmds
-  rm bin/isovfy bin/isoinfo bin/isodump bin/isodebug bin/devdump
-endef

contrib/depends/packages/native_clang.mk

@@ -1,29 +0,0 @@
-package=native_clang
-$(package)_version=9.0.0
-$(package)_download_path=https://releases.llvm.org/$($(package)_version)
-$(package)_download_file=clang+llvm-$($(package)_version)-x86_64-linux-gnu-ubuntu-18.04.tar.xz
-$(package)_file_name=clang-llvm-$($(package)_version)-x86_64-linux-gnu-ubuntu-18.04.tar.xz
-$(package)_sha256_hash=a23b082b30c128c9831dbdd96edad26b43f56624d0ad0ea9edec506f5385038d
-
-define $(package)_extract_cmds
-  echo $($(package)_sha256_hash) $($(package)_source) | sha256sum -c &&\
-  mkdir -p toolchain/bin toolchain/lib/clang/3.5/include && \
-  tar --strip-components=1 -C toolchain -xf $($(package)_source) && \
-  rm -f toolchain/lib/libc++abi.so* && \
-  echo "#!/bin/sh" > toolchain/bin/$(host)-dsymutil && \
-  echo "exit 0" >> toolchain/bin/$(host)-dsymutil && \
-  chmod +x toolchain/bin/$(host)-dsymutil
-endef
-
-define $(package)_stage_cmds
-  cd $($(package)_extract_dir)/toolchain && \
-  mkdir -p $($(package)_staging_prefix_dir)/lib/clang/$($(package)_version)/include && \
-  mkdir -p $($(package)_staging_prefix_dir)/bin $($(package)_staging_prefix_dir)/include && \
-  cp bin/clang $($(package)_staging_prefix_dir)/bin/ &&\
-  cp -P bin/clang++ $($(package)_staging_prefix_dir)/bin/ &&\
-  cp lib/libLTO.so $($(package)_staging_prefix_dir)/lib/ && \
-  cp -rf lib/clang/$($(package)_version)/include/* $($(package)_staging_prefix_dir)/lib/clang/$($(package)_version)/include/ && \
-  cp bin/dsymutil $($(package)_staging_prefix_dir)/bin/$(host)-dsymutil && \
-  if `test -d include/c++/`; then cp -rf include/c++/ $($(package)_staging_prefix_dir)/include/; fi && \
-  if `test -d lib/c++/`; then cp -rf lib/c++/ $($(package)_staging_prefix_dir)/lib/; fi
-endef

contrib/depends/packages/native_cmake-unused.mk

@@ -1,23 +0,0 @@
-package=native_cmake
-$(package)_version=3.14.0
-$(package)_version_dot=v3.14
-$(package)_download_path=https://cmake.org/files/$($(package)_version_dot)/
-$(package)_file_name=cmake-$($(package)_version).tar.gz
-$(package)_sha256_hash=aa76ba67b3c2af1946701f847073f4652af5cbd9f141f221c97af99127e75502
-
-define $(package)_set_vars
-$(package)_config_opts=
-endef
-
-define $(package)_config_cmds
-  ./bootstrap &&\
-  ./configure $($(package)_config_opts)
-endef
-
-define $(package)_build_cmd
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef

contrib/depends/packages/native_ds_store.mk

@@ -1,17 +0,0 @@
-package=native_ds_store
-$(package)_version=1.1.0
-$(package)_download_path=https://github.com/al45tair/ds_store/archive/
-$(package)_download_file=v$($(package)_version).tar.gz
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=a9f4c0755c6be7224ff7029e188dd262e830bb81e801424841db9eb0780ec8ed
-$(package)_install_libdir=$(build_prefix)/lib/python/dist-packages
-$(package)_dependencies=native_biplist
-
-define $(package)_build_cmds
-    python setup.py build
-endef
-
-define $(package)_stage_cmds
-    mkdir -p $($(package)_install_libdir) && \
-    python setup.py install --root=$($(package)_staging_dir) --prefix=$(build_prefix) --install-lib=$($(package)_install_libdir)
-endef

contrib/depends/packages/native_libdmg-hfsplus.mk

@@ -1,22 +0,0 @@
-package=native_libdmg-hfsplus
-$(package)_version=0.1
-$(package)_download_path=https://github.com/theuni/libdmg-hfsplus/archive
-$(package)_file_name=libdmg-hfsplus-v$($(package)_version).tar.gz
-$(package)_sha256_hash=6569a02eb31c2827080d7d59001869ea14484c281efab0ae7f2b86af5c3120b3
-$(package)_build_subdir=build
-
-define $(package)_preprocess_cmds
-  mkdir build
-endef
-
-define $(package)_config_cmds
-  cmake -DCMAKE_INSTALL_PREFIX:PATH=$(build_prefix)/bin ..
-endef
-
-define $(package)_build_cmds
-  $(MAKE) -C dmg
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) -C dmg install
-endef

contrib/depends/packages/native_libtapi.mk

@@ -1,28 +0,0 @@
-package=native_libtapi
-$(package)_version=664b8414f89612f2dfd35a9b679c345aa5389026
-$(package)_download_path=https://github.com/tpoechtrager/apple-libtapi/archive
-$(package)_download_file=$($(package)_version).tar.gz
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=62e419c12d1c9fad67cc1cd523132bc00db050998337c734c15bc8d73cc02b61
-$(package)_build_subdir=build
-$(package)_dependencies=native_clang
-
-define $(package)_config_cmds
-  echo -n $(build_prefix) > INSTALLPREFIX; \
-  CC=$(host_prefix)/native/bin/clang CXX=$(host_prefix)/native/bin/clang++ \
-  cmake -DCMAKE_INSTALL_PREFIX=$(build_prefix) \
-    -DLLVM_INCLUDE_TESTS=OFF \
-	-DCMAKE_BUILD_TYPE=RELEASE \
-	-DTAPI_REPOSITORY_STRING="1100.0.11" \
-	-DTAPI_FULL_VERSION="11.0.0" \
-	-DCMAKE_CXX_FLAGS="-I $($(package)_extract_dir)/src/llvm/projects/clang/include -I $($(package)_build_dir)/projects/clang/include" \
-	$($(package)_extract_dir)/src/llvm
-endef
-
-define $(package)_build_cmds
-  $(MAKE) clangBasic && $(MAKE) libtapi
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install-libtapi install-tapi-headers
-endef

contrib/depends/packages/native_mac_alias.mk

@@ -1,21 +0,0 @@
-package=native_mac_alias
-$(package)_version=1.1.0
-$(package)_download_path=https://github.com/al45tair/mac_alias/archive/
-$(package)_download_file=v$($(package)_version).tar.gz
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=b10cb44ecb64fc25283fae7a9cf365d2829377d84e37b9c21100aca8757509be
-$(package)_install_libdir=$(build_prefix)/lib/python/dist-packages
-$(package)_patches=python3.patch
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/python3.patch
-endef
-
-define $(package)_build_cmds
-    python setup.py build
-endef
-
-define $(package)_stage_cmds
-    mkdir -p $($(package)_install_libdir) && \
-    python setup.py install --root=$($(package)_staging_dir) --prefix=$(build_prefix) --install-lib=$($(package)_install_libdir)
-endef

contrib/depends/packages/native_protobuf.mk

@@ -1,27 +0,0 @@
-package=protobuf3
-$(package)_version=3.6.1
-$(package)_download_path=https://github.com/protocolbuffers/protobuf/releases/download/v$($(package)_version)/
-$(package)_file_name=protobuf-cpp-$($(package)_version).tar.gz
-$(package)_sha256_hash=b3732e471a9bb7950f090fd0457ebd2536a9ba0891b7f3785919c654fe2a2529
-$(package)_cxxflags=-std=c++11
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --prefix=$(build_prefix)
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) -C src
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) -C src install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/libprotoc.a
-endef

contrib/depends/packages/ncurses.mk

@@ -1,63 +0,0 @@
-package=ncurses
-$(package)_version=6.1
-$(package)_download_path=https://ftp.gnu.org/gnu/ncurses
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=aa057eeeb4a14d470101eff4597d5833dcef5965331be3528c08d99cebaa0d17
-$(package)_patches=fallback.c
-
-define $(package)_set_vars
-  $(package)_build_opts=CC="$($(package)_cc)"
-  $(package)_config_env=cf_cv_ar_flags=""
-  $(package)_config_opts=--prefix=$(host_prefix)
-  $(package)_config_opts+=--disable-shared
-  $(package)_config_opts+=--with-build-cc=gcc
-  $(package)_config_opts+=--without-debug
-  $(package)_config_opts+=--without-ada
-  $(package)_config_opts+=--without-cxx-binding
-  $(package)_config_opts+=--without-cxx
-  $(package)_config_opts+=--without-ticlib
-  $(package)_config_opts+=--without-tic
-  $(package)_config_opts+=--without-progs
-  $(package)_config_opts+=--without-tests
-  $(package)_config_opts+=--without-tack
-  $(package)_config_opts+=--without-manpages
-  $(package)_config_opts+=--with-termlib=tinfo
-  $(package)_config_opts+=--disable-tic-depends
-  $(package)_config_opts+=--disable-big-strings
-  $(package)_config_opts+=--disable-ext-colors
-  $(package)_config_opts+=--enable-pc-files
-  $(package)_config_opts+=--host=$(HOST)
-  $(pacakge)_config_opts+=--without-shared
-  $(pacakge)_config_opts+=--without-pthread
-  $(pacakge)_config_opts+=--disable-rpath
-  $(pacakge)_config_opts+=--disable-colorfgbg
-  $(pacakge)_config_opts+=--disable-ext-mouse
-  $(pacakge)_config_opts+=--disable-symlinks
-  $(pacakge)_config_opts+=--enable-warnings
-  $(pacakge)_config_opts+=--enable-assertions
-  $(package)_config_opts+=--with-default-terminfo-dir=/etc/_terminfo_
-  $(package)_config_opts+=--with-terminfo-dirs=/etc/_terminfo_
-  $(pacakge)_config_opts+=--enable-database
-  $(pacakge)_config_opts+=--enable-sp-funcs
-  $(pacakge)_config_opts+=--disable-term-driver
-  $(pacakge)_config_opts+=--enable-interop
-  $(pacakge)_config_opts+=--enable-widec
-  $(package)_build_opts=CFLAGS="$($(package)_cflags) $($(package)_cppflags) -fPIC"
-endef
-
-define $(package)_preprocess_cmds
-  cp $($(package)_patch_dir)/fallback.c ncurses
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) $($(package)_build_opts) V=1
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) install.libs DESTDIR=$($(package)_staging_dir)
-endef
-

contrib/depends/packages/openssl.mk

@@ -1,68 +0,0 @@
-package=openssl
-$(package)_version=3.0.11
-$(package)_download_path=https://www.openssl.org/source
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=b3425d3bb4a2218d0697eb41f7fc0cdede016ed19ca49d168b78e8d947887f55
-
-define $(package)_set_vars
-$(package)_config_env=AR="$($(package)_ar)" ARFLAGS=$($(package)_arflags) RANLIB="$($(package)_ranlib)" CC="$($(package)_cc)"
-$(package)_config_env_android=ANDROID_NDK_ROOT="$(host_prefix)/native" PATH="$(host_prefix)/native/bin" CC=clang AR=ar RANLIB=ranlib
-$(package)_build_env_android=ANDROID_NDK_ROOT="$(host_prefix)/native"
-$(package)_config_opts=--prefix=$(host_prefix) --openssldir=$(host_prefix)/etc/openssl --libdir=$(host_prefix)/lib
-$(package)_config_opts+=no-capieng
-$(package)_config_opts+=no-dso
-$(package)_config_opts+=no-dtls1
-$(package)_config_opts+=no-ec_nistp_64_gcc_128
-$(package)_config_opts+=no-gost
-$(package)_config_opts+=no-md2
-$(package)_config_opts+=no-rc5
-$(package)_config_opts+=no-rdrand
-$(package)_config_opts+=no-rfc3779
-$(package)_config_opts+=no-sctp
-$(package)_config_opts+=no-shared
-$(package)_config_opts+=no-ssl-trace
-$(package)_config_opts+=no-ssl3
-$(package)_config_opts+=no-tests
-$(package)_config_opts+=no-unit-test
-$(package)_config_opts+=no-weak-ssl-ciphers
-$(package)_config_opts+=no-zlib
-$(package)_config_opts+=no-zlib-dynamic
-$(package)_config_opts+=$($(package)_cflags) $($(package)_cppflags)
-$(package)_config_opts_linux=-fPIC -Wa,--noexecstack
-$(package)_config_opts_freebsd=-fPIC -Wa,--noexecstack
-$(package)_config_opts_x86_64_linux=linux-x86_64
-$(package)_config_opts_i686_linux=linux-generic32
-$(package)_config_opts_arm_linux=linux-generic32
-$(package)_config_opts_aarch64_linux=linux-generic64
-$(package)_config_opts_arm_android=--static android-arm
-$(package)_config_opts_aarch64_android=--static android-arm64
-$(package)_config_opts_aarch64_darwin=darwin64-arm64-cc
-$(package)_config_opts_riscv64_linux=linux-generic64
-$(package)_config_opts_mipsel_linux=linux-generic32
-$(package)_config_opts_mips_linux=linux-generic32
-$(package)_config_opts_powerpc_linux=linux-generic32
-$(package)_config_opts_x86_64_darwin=darwin64-x86_64-cc
-$(package)_config_opts_x86_64_mingw32=mingw64
-$(package)_config_opts_i686_mingw32=mingw
-$(package)_config_opts_x86_64_freebsd=BSD-x86_64
-endef
-
-define $(package)_preprocess_cmds
-  sed -i.old 's|crypto ssl apps util tools fuzz providers doc|crypto ssl util tools providers|' build.info
-endef
-
-define $(package)_config_cmds
-  ./Configure $($(package)_config_opts)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) build_libs
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install_sw
-endef
-
-define $(package)_postprocess_cmds
-  rm -rf share bin etc
-endef

contrib/depends/packages/packages.mk

@@ -1,38 +0,0 @@
-packages:=boost openssl zeromq libiconv expat unbound
-
-# ccache is useless in gitian builds
-ifneq ($(GITIAN),1)
-native_packages := native_ccache
-endif
-
-hardware_packages := hidapi protobuf libusb
-hardware_native_packages := native_protobuf
-
-android_native_packages = android_ndk
-android_packages = ncurses readline sodium
-
-darwin_native_packages = $(hardware_native_packages)
-darwin_packages = ncurses readline sodium $(hardware_packages)
-
-# not really native...
-freebsd_native_packages = freebsd_base
-freebsd_packages = ncurses readline sodium
-
-linux_packages = eudev ncurses readline sodium $(hardware_packages)
-linux_native_packages = $(hardware_native_packages)
-
-ifeq ($(build_tests),ON)
-packages += gtest
-endif
-
-ifneq ($(host_arch),riscv64)
-linux_packages += unwind
-endif
-
-mingw32_packages = icu4c sodium $(hardware_packages)
-mingw32_native_packages = $(hardware_native_packages)
-
-ifneq ($(build_os),darwin)
-darwin_native_packages += darwin_sdk native_clang native_cctools native_libtapi
-endif
-

contrib/depends/packages/protobuf.mk

@@ -1,36 +0,0 @@
-package=protobuf
-$(package)_version=$(native_$(package)_version)
-$(package)_download_path=$(native_$(package)_download_path)
-$(package)_file_name=$(native_$(package)_file_name)
-$(package)_sha256_hash=$(native_$(package)_sha256_hash)
-$(package)_dependencies=native_$(package)
-$(package)_cxxflags=-std=c++11
-$(package)_patches=visibility.patch
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --with-protoc=$(build_prefix)/bin/protoc
-  $(package)_config_opts_linux=--with-pic
-endef
-
-define $(package)_preprocess_cmds
-  patch -p0 < $($(package)_patch_dir)/visibility.patch
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) -C src libprotobuf.la
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) -C src install-libLTLIBRARIES install-nobase_includeHEADERS &&\
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install-pkgconfigDATA
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/libprotoc.a &&\
-  rm lib/*.la
-endef
-

contrib/depends/packages/readline.mk

@@ -1,29 +0,0 @@
-package=readline
-$(package)_version=8.0
-$(package)_download_path=https://ftp.gnu.org/gnu/readline
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=e339f51971478d369f8a053a330a190781acb9864cf4c541060f12078948e461
-$(package)_dependencies=ncurses
-
-define $(package)_set_vars
-  $(package)_build_opts=CC="$($(package)_cc)"
-  $(package)_config_opts+=--prefix=$(host_prefix)
-  $(package)_config_opts+=--exec-prefix=$(host_prefix)
-  $(package)_config_opts+=--host=$(HOST)
-  $(package)_config_opts+=--disable-shared --with-curses
-  $(package)_config_opts_release=--disable-debug-mode
-  $(package)_build_opts=CFLAGS="$($(package)_cflags) $($(package)_cppflags) -fPIC"
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) $($(package)_build_opts)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) install DESTDIR=$($(package)_staging_dir) prefix=$(host_prefix) exec-prefix=$(host_prefix)
-endef
-

contrib/depends/packages/sodium.mk

@@ -1,34 +0,0 @@
-package=sodium
-$(package)_version=1.0.18
-$(package)_download_path=https://download.libsodium.org/libsodium/releases/
-$(package)_file_name=libsodium-$($(package)_version).tar.gz
-$(package)_sha256_hash=6f504490b342a4f8a4c4a02fc9b866cbef8622d5df4e5452b46be121e46636c1
-$(package)_patches=disable-glibc-getrandom-getentropy.patch fix-whitespace.patch
-
-define $(package)_set_vars
-$(package)_config_opts=--enable-static --disable-shared
-$(package)_config_opts+=--prefix=$(host_prefix)
-endef
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/disable-glibc-getrandom-getentropy.patch &&\
-  autoconf &&\
-  patch -p1 < $($(package)_patch_dir)/fix-whitespace.patch
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/unbound.mk

@@ -1,36 +0,0 @@
-package=unbound
-$(package)_version=1.15.0
-$(package)_download_path=https://www.nlnetlabs.nl/downloads/$(package)/
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=a480dc6c8937447b98d161fe911ffc76cfaffa2da18788781314e81339f1126f
-$(package)_dependencies=openssl expat
-$(package)_patches=disable-glibc-reallocarray.patch
-
-
-define $(package)_set_vars
-  $(package)_config_opts=--disable-shared --enable-static --without-pyunbound --prefix=$(host_prefix) --with-libexpat=$(host_prefix) --with-ssl=$(host_prefix) --with-libevent=no --without-pythonmodule --disable-flto --with-pthreads --with-libunbound-only
-  $(package)_config_opts_linux=--with-pic
-  $(package)_config_opts_w64=--enable-static-exe --sysconfdir=/etc --prefix=$(host_prefix) --target=$(host_prefix)
-  $(package)_config_opts_x86_64_darwin=ac_cv_func_SHA384_Init=yes
-  $(package)_build_opts_mingw32=LDFLAGS="$($(package)_ldflags) -lpthread"
-endef
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/disable-glibc-reallocarray.patch &&\
-  autoconf
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) ac_cv_func_getentropy=no
-endef
-
-define $(package)_build_cmds
-  $(MAKE) $($(package)_build_opts)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-endef

contrib/depends/packages/unwind.mk

@@ -1,29 +0,0 @@
-package=unwind
-$(package)_version=1.5.0
-$(package)_download_path=https://download.savannah.nongnu.org/releases/libunwind
-$(package)_file_name=lib$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=90337653d92d4a13de590781371c604f9031cdb50520366aa1e3a91e1efb1017
-$(package)_patches=fix_obj_order.patch
-
-define $(package)_preprocess_cmds
-  patch -p0 < $($(package)_patch_dir)/fix_obj_order.patch
-endef
-
-define $(package)_config_cmds
-  cp -f $(BASEDIR)/config.guess config/config.guess &&\
-  cp -f $(BASEDIR)/config.sub config/config.sub &&\
-  $($(package)_autoconf) --disable-shared --enable-static --disable-tests --disable-documentation AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef
-
-define $(package)_postprocess_cmds
-  rm lib/*.la
-endef
-

contrib/depends/packages/xproto.mk

@@ -1,21 +0,0 @@
-package=xproto
-$(package)_version=7.0.26
-$(package)_download_path=https://xorg.freedesktop.org/releases/individual/proto
-$(package)_file_name=$(package)-$($(package)_version).tar.bz2
-$(package)_sha256_hash=636162c1759805a5a0114a369dffdeccb8af8c859ef6e1445f26a4e6e046514f
-
-define $(package)_set_vars
-$(package)_config_opts=--disable-shared
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf)
-endef
-
-define $(package)_build_cmds
-  $(MAKE)
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install
-endef

contrib/depends/packages/zeromq.mk

@@ -1,35 +0,0 @@
-package=zeromq
-$(package)_version=4.3.4
-$(package)_download_path=https://github.com/zeromq/libzmq/releases/download/v$($(package)_version)/
-$(package)_file_name=$(package)-$($(package)_version).tar.gz
-$(package)_sha256_hash=c593001a89f5a85dd2ddf564805deb860e02471171b3f204944857336295c3e5
-$(package)_patches=06aba27b04c5822cb88a69677382a0f053367143.patch
-
-define $(package)_set_vars
-  $(package)_config_opts=--without-documentation --disable-shared --without-libsodium --disable-curve
-  $(package)_config_opts_linux=--with-pic
-  $(package)_config_opts_freebsd=--with-pic
-  $(package)_cxxflags=-std=c++11
-endef
-
-define $(package)_preprocess_cmds
-  patch -p1 < $($(package)_patch_dir)/06aba27b04c5822cb88a69677382a0f053367143.patch
-endef
-
-define $(package)_config_cmds
-  $($(package)_autoconf) AR_FLAGS=$($(package)_arflags)
-endef
-
-define $(package)_build_cmds
-  $(MAKE) src/libzmq.la
-endef
-
-define $(package)_stage_cmds
-  $(MAKE) DESTDIR=$($(package)_staging_dir) install-libLTLIBRARIES install-includeHEADERS install-pkgconfigDATA
-endef
-
-define $(package)_postprocess_cmds
-  rm -rf bin share &&\
-  rm lib/*.la
-endef
-

contrib/depends/patches/boost/fix_arm_arch.patch

@@ -1,11 +0,0 @@
---- boost_1_64_0/tools/build/src/tools/darwin.jam.O	2017-04-17 03:22:26.000000000 +0100
-+++ boost_1_64_0/tools/build/src/tools/darwin.jam	2022-05-04 17:26:29.984464447 +0000
-@@ -505,7 +505,7 @@
-             if $(instruction-set) {
-                 options = -arch$(_)$(instruction-set) ;
-             } else {
--                options = -arch arm ;
-+#                options = -arch arm ;
-             }
-         }
-     }

contrib/depends/patches/boost/fix_aroptions.patch

@@ -1,28 +0,0 @@
---- boost_1_64_0/tools/build/src/tools/gcc.jam.O	2017-04-17 03:22:26.000000000 +0100
-+++ boost_1_64_0/tools/build/src/tools/gcc.jam	2019-11-15 15:46:16.957937137 +0000
-@@ -243,6 +243,8 @@
-     {
-         ECHO notice: using gcc archiver :: $(condition) :: $(archiver[1]) ;
-     }
-+    local arflags = [ feature.get-values <arflags> : $(options) ] ;
-+    toolset.flags gcc.archive .ARFLAGS $(condition) : $(arflags) ;
- 
-     # - Ranlib.
-     local ranlib = [ common.get-invocation-command gcc
-@@ -970,6 +972,7 @@
- # logic in intel-linux, but that is hardly worth the trouble as on Linux, 'ar'
- # is always available.
- .AR = ar ;
-+.ARFLAGS = rc ;
- .RANLIB = ranlib ;
- 
- toolset.flags gcc.archive AROPTIONS <archiveflags> ;
-@@ -1011,7 +1014,7 @@
- #
- actions piecemeal archive
- {
--    "$(.AR)" $(AROPTIONS) rc "$(<)" "$(>)"
-+    "$(.AR)" $(AROPTIONS) $(.ARFLAGS) "$(<)" "$(>)"
-     "$(.RANLIB)" "$(<)"
- }
- 

contrib/depends/patches/cmake/cmake-1-fixes.patch

@@ -1,67 +0,0 @@
-This file is part of MXE. See LICENSE.md for licensing information.
-
-Contains ad hoc patches for cross building.
-
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Tony Theodore <tonyt@logyst.com>
-Date: Fri, 12 Aug 2016 02:01:20 +1000
-Subject: [PATCH 1/3] fix windres invocation options
-
-windres doesn't recognise various gcc flags like -mms-bitfields,
--fopenmp, -mthreads etc. (basically not `-D` or `-I`)
-
-diff --git a/Modules/Platform/Windows-windres.cmake b/Modules/Platform/Windows-windres.cmake
-index 1111111..2222222 100644
---- a/Modules/Platform/Windows-windres.cmake
-+++ b/Modules/Platform/Windows-windres.cmake
-@@ -1 +1 @@
--set(CMAKE_RC_COMPILE_OBJECT "<CMAKE_RC_COMPILER> -O coff <DEFINES> <INCLUDES> <FLAGS> <SOURCE> <OBJECT>")
-+set(CMAKE_RC_COMPILE_OBJECT "<CMAKE_RC_COMPILER> -O coff <DEFINES> <INCLUDES> <SOURCE> <OBJECT>")
-
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Tony Theodore <tonyt@logyst.com>
-Date: Tue, 25 Jul 2017 20:34:56 +1000
-Subject: [PATCH 2/3] add option to disable -isystem
-
-taken from (not accepted):
-https://gitlab.kitware.com/cmake/cmake/merge_requests/895
-
-see also:
-https://gitlab.kitware.com/cmake/cmake/issues/16291
-https://gitlab.kitware.com/cmake/cmake/issues/16919
-
-diff --git a/Modules/Compiler/GNU.cmake b/Modules/Compiler/GNU.cmake
-index 1111111..2222222 100644
---- a/Modules/Compiler/GNU.cmake
-+++ b/Modules/Compiler/GNU.cmake
-@@ -42,7 +42,7 @@ macro(__compiler_gnu lang)
-   string(APPEND CMAKE_${lang}_FLAGS_RELWITHDEBINFO_INIT " -O2 -g -DNDEBUG")
-   set(CMAKE_${lang}_CREATE_PREPROCESSED_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -E <SOURCE> > <PREPROCESSED_SOURCE>")
-   set(CMAKE_${lang}_CREATE_ASSEMBLY_SOURCE "<CMAKE_${lang}_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -S <SOURCE> -o <ASSEMBLY_SOURCE>")
--  if(NOT APPLE OR NOT CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 4) # work around #4462
-+  if(NOT APPLE OR NOT CMAKE_${lang}_COMPILER_VERSION VERSION_LESS 4 AND (NOT MXE_DISABLE_INCLUDE_SYSTEM_FLAG)) # work around #4462
-     set(CMAKE_INCLUDE_SYSTEM_FLAG_${lang} "-isystem ")
-   endif()
- endmacro()
-
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Tony Theodore <tonyt@logyst.com>
-Date: Tue, 15 Aug 2017 15:25:06 +1000
-Subject: [PATCH 3/3] add CPACK_NSIS_EXECUTABLE variable
-
-
-diff --git a/Source/CPack/cmCPackNSISGenerator.cxx b/Source/CPack/cmCPackNSISGenerator.cxx
-index 1111111..2222222 100644
---- a/Source/CPack/cmCPackNSISGenerator.cxx
-+++ b/Source/CPack/cmCPackNSISGenerator.cxx
-@@ -384,7 +384,9 @@ int cmCPackNSISGenerator::InitializeInternal()
-   }
- #endif
- 
--  nsisPath = cmSystemTools::FindProgram("makensis", path, false);
-+  this->SetOptionIfNotSet("CPACK_NSIS_EXECUTABLE", "makensis");
-+  nsisPath = cmSystemTools::FindProgram(
-+    this->GetOption("CPACK_NSIS_EXECUTABLE"), path, false);
- 
-   if (nsisPath.empty()) {
-     cmCPackLogger(

contrib/depends/patches/hidapi/missing_win_include.patch

@@ -1,21 +0,0 @@
-From a77b066311da42ed7654e39c0356a3b951b2e296 Mon Sep 17 00:00:00 2001
-From: selsta <selsta@sent.at>
-Date: Wed, 10 Nov 2021 02:28:54 +0100
-Subject: [PATCH] windows: add missing include for mingw32
-
----
- windows/hid.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/windows/hid.c b/windows/hid.c
-index 24756a4..6d8394c 100644
---- a/windows/hid.c
-+++ b/windows/hid.c
-@@ -33,6 +33,7 @@ typedef LONG NTSTATUS;
- #endif
- 
- #ifdef __MINGW32__
-+#include <devpropdef.h>
- #include <ntdef.h>
- #include <winbase.h>
- #endif

contrib/depends/patches/icu4c/icu-001-dont-build-static-dynamic-twice.patch

@@ -1,37 +0,0 @@
-Don't build object files twice
-
-When passed --enable-static and --enable-shared, icu will generate
-both a shared and a static version of its libraries.
-
-However, in order to do so, it builds each and every object file
-twice: once with -fPIC (for the shared library), and once without
--fPIC (for the static library). While admittedly building -fPIC for a
-static library generates a slightly suboptimal code, this is what all
-the autotools-based project are doing. They build each object file
-once, and they use it for both the static and shared libraries.
-
-icu builds the object files for the shared library as .o files, and
-the object files for static library as .ao files. By simply changing
-the suffix of object files used for static libraries to ".o", we tell
-icu to use the ones built for the shared library (i.e, with -fPIC),
-and avoid the double build of icu.
-
-On a fast build server, this brings the target icu build from
-3m41.302s down to 1m43.926s (approximate numbers: some other builds
-are running on the system at the same time).
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
-Index: b/source/config/mh-linux
-===================================================================
---- a/source/config/mh-linux
-+++ b/source/config/mh-linux
-@@ -38,7 +38,7 @@
- ## Shared object suffix
- SO = so
- ## Non-shared intermediate object suffix
--STATIC_O = ao
-+STATIC_O = o
- 
- ## Compilation rules
- %.$(STATIC_O): $(srcdir)/%.c

contrib/depends/patches/libiconv/fix-whitespace.patch

@@ -1,13 +0,0 @@
-diff --git a/preload/configure b/preload/configure
-index aab5c77..e20b8f0 100755
---- a/preload/configure
-+++ b/preload/configure
-@@ -588,7 +588,7 @@ MAKEFLAGS=
- PACKAGE_NAME='libiconv'
- PACKAGE_TARNAME='libiconv'
- PACKAGE_VERSION='0'
--PACKAGE_STRING='libiconv 0'
-+PACKAGE_STRING='libiconv0'
- PACKAGE_BUGREPORT=''
- PACKAGE_URL=''
-

contrib/depends/patches/native_biplist/sorted_list.patch

@@ -1,29 +0,0 @@
---- a/biplist/__init__.py	2014-10-26 19:03:11.000000000 +0000
-+++ b/biplist/__init__.py	2016-07-19 19:30:17.663521999 +0000
-@@ -541,7 +541,7 @@
-             return HashableWrapper(n)
-         elif isinstance(root, dict):
-             n = {}
--            for key, value in iteritems(root):
-+            for key, value in sorted(iteritems(root)):
-                 n[self.wrapRoot(key)] = self.wrapRoot(value)
-             return HashableWrapper(n)
-         elif isinstance(root, list):
-@@ -616,7 +616,7 @@
-             elif isinstance(obj, dict):
-                 size = proc_size(len(obj))
-                 self.incrementByteCount('dictBytes', incr=1+size)
--                for key, value in iteritems(obj):
-+                for key, value in sorted(iteritems(obj)):
-                     check_key(key)
-                     self.computeOffsets(key, asReference=True)
-                     self.computeOffsets(value, asReference=True)
-@@ -714,7 +714,7 @@
-                 keys = []
-                 values = []
-                 objectsToWrite = []
--                for key, value in iteritems(obj):
-+                for key, value in sorted(iteritems(obj)):
-                     keys.append(key)
-                     values.append(value)
-                 for key in keys:

contrib/depends/patches/native_cdrkit/cdrkit-deterministic.patch

@@ -1,86 +0,0 @@
---- cdrkit-1.1.11.old/genisoimage/tree.c	2008-10-21 19:57:47.000000000 -0400
-+++ cdrkit-1.1.11/genisoimage/tree.c	2013-12-06 00:23:18.489622668 -0500
-@@ -1139,8 +1139,9 @@
- scan_directory_tree(struct directory *this_dir, char *path, 
- 						  struct directory_entry *de)
- {
--	DIR		*current_dir;
-+        int             current_file;
- 	char		whole_path[PATH_MAX];
-+        struct dirent  **d_list;
- 	struct dirent	*d_entry;
- 	struct directory *parent;
- 	int		dflag;
-@@ -1164,7 +1165,8 @@
- 	this_dir->dir_flags |= DIR_WAS_SCANNED;
- 
- 	errno = 0;	/* Paranoia */
--	current_dir = opendir(path);
-+	//current_dir = opendir(path);
-+        current_file = scandir(path, &d_list, NULL, alphasort);
- 	d_entry = NULL;
- 
- 	/*
-@@ -1173,12 +1175,12 @@
- 	 */
- 	old_path = path;
- 
--	if (current_dir) {
-+	if (current_file >= 0) {
- 		errno = 0;
--		d_entry = readdir(current_dir);
-+		d_entry = d_list[0];
- 	}
- 
--	if (!current_dir || !d_entry) {
-+	if (current_file < 0 || !d_entry) {
- 		int	ret = 1;
- 
- #ifdef	USE_LIBSCHILY
-@@ -1191,8 +1193,8 @@
- 			de->isorec.flags[0] &= ~ISO_DIRECTORY;
- 			ret = 0;
- 		}
--		if (current_dir)
--			closedir(current_dir);
-+		if(d_list)
-+			free(d_list);
- 		return (ret);
- 	}
- #ifdef	ABORT_DEEP_ISO_ONLY
-@@ -1208,7 +1210,7 @@
- 			errmsgno(EX_BAD, "use Rock Ridge extensions via -R or -r,\n");
- 			errmsgno(EX_BAD, "or allow deep ISO9660 directory nesting via -D.\n");
- 		}
--		closedir(current_dir);
-+		free(d_list);
- 		return (1);
- 	}
- #endif
-@@ -1250,13 +1252,13 @@
- 		 * The first time through, skip this, since we already asked
- 		 * for the first entry when we opened the directory.
- 		 */
--		if (dflag)
--			d_entry = readdir(current_dir);
-+		if (dflag && current_file >= 0)
-+			d_entry = d_list[current_file];
- 		dflag++;
- 
--		if (!d_entry)
-+		if (current_file < 0)
- 			break;
--
-+                current_file--;
- 		/* OK, got a valid entry */
- 
- 		/* If we do not want all files, then pitch the backups. */
-@@ -1348,7 +1350,7 @@
- 		insert_file_entry(this_dir, whole_path, d_entry->d_name);
- #endif	/* APPLE_HYB */
- 	}
--	closedir(current_dir);
-+	free(d_list);
- 
- #ifdef APPLE_HYB
- 	/*

contrib/depends/patches/native_mac_alias/python3.patch

@@ -1,72 +0,0 @@
-diff -dur a/mac_alias/alias.py b/mac_alias/alias.py
---- a/mac_alias/alias.py	2015-10-19 12:12:48.000000000 +0200
-+++ b/mac_alias/alias.py	2016-04-03 12:13:12.037159417 +0200
-@@ -243,10 +243,10 @@
-         alias = Alias()
-         alias.appinfo = appinfo
-             
--        alias.volume = VolumeInfo (volname.replace('/',':'),
-+        alias.volume = VolumeInfo (volname.decode().replace('/',':'),
-                                    voldate, fstype, disktype,
-                                    volattrs, volfsid)
--        alias.target = TargetInfo (kind, filename.replace('/',':'),
-+        alias.target = TargetInfo (kind, filename.decode().replace('/',':'),
-                                    folder_cnid, cnid,
-                                    crdate, creator_code, type_code)
-         alias.target.levels_from = levels_from
-@@ -261,9 +261,9 @@
-                 b.read(1)
- 
-             if tag == TAG_CARBON_FOLDER_NAME:
--                alias.target.folder_name = value.replace('/',':')
-+                alias.target.folder_name = value.decode().replace('/',':')
-             elif tag == TAG_CNID_PATH:
--                alias.target.cnid_path = struct.unpack(b'>%uI' % (length // 4),
-+                alias.target.cnid_path = struct.unpack('>%uI' % (length // 4),
-                                                            value)
-             elif tag == TAG_CARBON_PATH:
-                 alias.target.carbon_path = value
-@@ -298,9 +298,9 @@
-                 alias.target.creation_date \
-                     = mac_epoch + datetime.timedelta(seconds=seconds)
-             elif tag == TAG_POSIX_PATH:
--                alias.target.posix_path = value
-+                alias.target.posix_path = value.decode()
-             elif tag == TAG_POSIX_PATH_TO_MOUNTPOINT:
--                alias.volume.posix_path = value
-+                alias.volume.posix_path = value.decode()
-             elif tag == TAG_RECURSIVE_ALIAS_OF_DISK_IMAGE:
-                 alias.volume.disk_image_alias = Alias.from_bytes(value)
-             elif tag == TAG_USER_HOME_LENGTH_PREFIX:
-@@ -422,13 +422,13 @@
-         #       (so doing so is ridiculous, and nothing could rely on it).
-         b.write(struct.pack(b'>h28pI2shI64pII4s4shhI2s10s',
-                             self.target.kind,
--                            carbon_volname, voldate,
-+                            carbon_volname, int(voldate),
-                             self.volume.fs_type,
-                             self.volume.disk_type,
-                             self.target.folder_cnid,
-                             carbon_filename,
-                             self.target.cnid,
--                            crdate,
-+                            int(crdate),
-                             self.target.creator_code,
-                             self.target.type_code,
-                             self.target.levels_from,
-@@ -449,12 +449,12 @@
- 
-         b.write(struct.pack(b'>hhQhhQ',
-                 TAG_HIGH_RES_VOLUME_CREATION_DATE,
--                8, long(voldate * 65536),
-+                8, int(voldate * 65536),
-                 TAG_HIGH_RES_CREATION_DATE,
--                8, long(crdate * 65536)))
-+                8, int(crdate * 65536)))
- 
-         if self.target.cnid_path:
--            cnid_path = struct.pack(b'>%uI' % len(self.target.cnid_path),
-+            cnid_path = struct.pack('>%uI' % len(self.target.cnid_path),
-                                     *self.target.cnid_path)
-             b.write(struct.pack(b'>hh', TAG_CNID_PATH,
-                                  len(cnid_path)))