The openssl pkcs12 round-trip step was speculative defense against
"modern macOS Keychain exports incompatible with security import" —
a problem we made up. What was actually happening:
1. The original failure ("SecKeychainItemImport: Unknown format")
was caused by a TRUNCATED base64 secret value. security wasn't
rejecting the format; it was rejecting bytes it couldn't parse
because the file was 29 bytes short.
2. The follow-on failure ("RC2-40-CBC unsupported") was the openssl
conversion step bombing because openssl 3.x has RC2-40-CBC
disabled by default. macOS Keychain Access actually exports
PKCS12 with RC2-40-CBC + PBE-SHA1 — exactly what `security
import` reads natively.
With the truncated-secret fixed (re-pasted via Gitea API), the .p12
on disk is now correct. Import it directly without round-tripping
through openssl. Less code, fewer failure modes, faster.
macOS Keychain Access on Sonoma+ exports .p12 with modern crypto
(AES-256-GCM + PBKDF2 + SHA-256). The `security import` binary on
some macOS releases — including ours apparently — rejects it with:
SecKeychainItemImport: Unknown format in import.
The openssl decode itself was fine (now using openssl base64 -d -A),
but security can't import the resulting PKCS12 envelope.
Pipe the .p12 through openssl: unpack with the user's password, then
re-export using legacy PBE-SHA1-3DES for both certs and keys, plus
SHA1 MAC. The resulting .p12 uses 90s-era crypto for the OUTER
envelope, which is what security import wants — the actual signing
keys + cert inside are unchanged. No security implication; the legacy
format encryption only matters for the few seconds the .p12 lives in
$RUNNER_TEMP before being imported and deleted.
Also added diagnostic output (file size, magic bytes, file(1)) so the
next failure mode (if any) is easier to characterize.
`base64 --decode` also failed on the Mac runner with the same
"(null): error decoding base64 input stream" — so either this macOS
version's BSD base64 doesn't honor --decode (only -D) or it chokes
on the input format. Either way, swap the three secret decodes to
`openssl base64 -d -A`:
- openssl ships with macOS by default; no extra install
- -d = decode (same on BSD and Linux, no platform skew)
- -A treats the input as one continuous line (matches our
`base64 -i x | tr -d '\n'` encoding flow)
If openssl base64 ever bites us we'll fall back to python3's
base64.b64decode, but openssl has been bulletproof for ~25 years.
macOS uses BSD base64 where -d historically means *debug*, not
*decode* like GNU base64. On the Mac runner that bit us — the
first base64 -d invocation ran in debug mode, consumed no stdin,
and produced an empty .p12 file, then the keychain import bombed
with the now-classic "(null): error decoding base64 input stream"
once a downstream tool tried to read the empty file.
Switch all three secret decodes (.p12 cert, .mobileprovision,
.p8 API key) to base64 --decode. Long form is identical between
GNU coreutils and BSD base64.
The Apple secrets themselves were fine — sanity-check step
confirmed all non-zero lengths (TEAM_ID/KEY_ID showed as ***0
in the log, which is the actual literal 10 with the 1 redacted
because some other secret value contains the substring "1").
First TestFlight trigger failed at the .p12 import step with
"base64: stdin: (null): error decoding base64 input stream" — meaning
$APPLE_DIST_CERT_P12_BASE64 was empty when reaching the keychain step.
Add a length-only debug step at the top of the Apple-signing section
that prints the length of every required Apple secret and bails
fast with a clear "set this secret on Builds/hash-wallet" message if
any is zero-length. Same pattern build-android.yml uses for the
Android keystore + Trocador secrets.
The likely cause is the Apple secrets being set on github-such-
software/hash-wallet but not on the Builds fork the workflow runs
in — Gitea secrets are repo-scoped, not org-scoped.
Two unrelated wallet-UX fixes in one commit:
1) lib/utils/exception_handler.dart — switch the "Report Error" flow
from "open prefilled GitHub issue URL" to "copy error trace to
clipboard + open https://hash.boats/report/". The hash.boats backend
(Node service + nginx proxy + Telegram relay) was already deployed
to the suchwow server; the in-app handler just never got wired to
use it. No GitHub account required, works on every platform.
2) lib/wownero/cw_wownero.dart — add 'primaryAddress' to the keys map
returned by getKeys(). The lib/monero/cw_monero.dart equivalent
already had this; without it, WalletKeysViewModel renders zero
primary-address entry for Wownero wallets and users can't easily
read off the main address for sharing (e.g. to set up a view-only
wallet on another device). The underlying WowneroWalletBase.keys
already populated primaryAddress — only the getKeys map projection
was missing it.
The committed project.pbxproj Release config uses CODE_SIGN_STYLE =
Automatic + CODE_SIGN_IDENTITY = "Apple Development" — both set up for
local Xcode-signed-into-an-Apple-ID development workflow. CI has only
the Distribution cert + provisioning profile we install into a temp
keychain, no Apple ID session, so Automatic signing fails at archive
time.
Append manual-signing overrides to ios/Flutter/Release.xcconfig in CI
(xcconfig values take precedence over pbxproj defaults, so this
overrides without modifying the committed project file):
CODE_SIGN_IDENTITY = Apple Distribution
CODE_SIGN_STYLE = Manual
DEVELOPMENT_TEAM = ${APPLE_TEAM_ID}
PROVISIONING_PROFILE_SPECIFIER = ${PROFILE_NAME}
PROFILE_NAME is parsed earlier from the .mobileprovision Name field.
APPLE_TEAM_ID comes from the existing Gitea secret. Local Debug/Profile
builds remain on Automatic signing — unchanged.
Updates Discord server invite link found within the application settings to redirect visitors to up-to-date invite link, that is found on main cakewallet.com site as well.
Co-authored-by: Omar Hatem <omarh.ismail1@gmail.com>
* linux fixes
fix: use ints instead of bools in SQLite to prevent crashes on linux
fix: disable lightning if it's unsupported
ui: start linux app in portrait mode instead of landscape so it looks
nicer
* minor cleanup
---------
Co-authored-by: Omar <omarh.ismail1@gmail.com>
Squashed migration of node Hive→SQLite, default-node handling,
isPow/proxy support, arbitrum node updates, and related fixes.
Replays node-sqlite-migration on top of current dev without the
amount-refactor merge that the original branch carried.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
7-Zip SFX wrapped HashBags.exe extracted to a fresh %TEMP%\7zS<random>\
subdir on every launch. path_provider_windows derives the wallet
storage dir from the .exe location — so each launch saw a brand new
"app dir" with no prior wallets, failing with "keys corrupted" before
hanging at the PIN prompt. The multi-file zip distribution doesn't
have this problem because the .exe lives at a stable user-chosen path.
Multi-file zip is also what Firefox Portable, VS Code Portable, OBS
Portable, and ~every other Flutter Windows desktop app ship as. The
fashion in Windows is "portable = no install / no registry," not
"portable = one file."
Single-file via Inno Setup installer or Enigma Virtual Box remains
possible as a v1.1 follow-up. For v1, ship the zip.
* feat: Add memo support for swap
* fix: Error on swap page select receiver bottomsheet when picking receiveing currency that's not a wallet type
* feat: exclude providers that do not support memo when receive currency needs it, also show passed memo in confirmation and trade history sheets
* fix: overflow for destination tag on swap confirmation
* feat: add support for Zcash names resolution
* fix conflict because github is shit
---------
Co-authored-by: Omar Hatem <omarh.ismail1@gmail.com>
The 23.01 "7-Zip Extra" archive (7z2301-extra.7z) was reorganized and
no longer contains the installer-mode SFX modules — only the
standalone 7za.exe/dll + Far plugin. The SFX modules were moved into
the LZMA SDK archive (lzma2301.7z), under bin/:
bin/7zSD.sfx — classic installer-mode SFX (config.txt + RunProgram)
bin/7zS2.sfx — newer variant
bin/7zS2con.sfx — console variant of the new module
Fetch the LZMA SDK instead. Use a filtered extract ('bin/*.sfx') so we
only pull ~150KB of binaries from the 1.3MB SDK archive (skipping the
700 source-code files we don't need).
7-Zip Extra 23.01 puts 7zSD.sfx / 7zS.sfx under x64/ (64-bit variants)
and x86/ subdirs, not at the archive root. The previous lookup only
checked the root and bailed even though the modules were one level
deeper. Add x64/ as the primary candidate path, fall back to root for
older Extra archive layouts.
The 24.x extra archives have been pruned from the live 7-zip.org CDN —
verified by curl HEAD over 2401/2403/2405/2406/2407/2408/2409, all
return 404. Only 7z2301-extra.7z (Jan 2023) is still served with 200.
That version's installer-mode SFX modules (7zS.sfx, 7zSD.sfx) are
backwards-compatible with any modern Windows so pinning here is fine.
choco's 7-Zip install ships 7z.sfx (GUI extract-here prompt) and
7zCon.sfx (console extractor) — but NOT 7zS.sfx / 7zSD.sfx, the
installer-mode SFX modules that support `extract to temp + auto-run
RunProgram`. Those live in the "7-Zip Extra" supplementary archive
(https://www.7-zip.org/a/7z2409-extra.7z) which has to be downloaded
separately.
Fetch + extract the Extra archive on demand in the SFX-wrap step.
Cache it under $RUNNER_TEMP so subsequent runs reuse the same module
without re-downloading. ~250 KB download, one-shot per runner working
dir lifetime.
The previous commit deleted assets/zano_node_list.yml (Zano isn't
shipped in Hash Bags) but pubspec_base.yaml still listed it under
flutter.assets. Flutter assemble failed during the asset-bundling
stage:
Error detected in pubspec.yaml:
No file or variants found for asset: assets/zano_node_list.yml.
Remove the line — same intent as the original deletion, just the
second half of the change.
The previous commit's bash heredoc for the 7-Zip SFX config:
cat > sfx-config.txt <<'SFXCFG'
;!@Install@!UTF-8!
...
SFXCFG
…had its body at the left margin (since heredoc lines are taken
literally). But the surrounding YAML used `run: |` which requires
every line to be indented more than the `run:` key. The unindented
heredoc body broke out of the block scalar — Gitea Actions
rejected the workflow with "could not find expected ':'" at the
;!@Install line.
Switch to a single `printf '...' > sfx-config.txt` line that fits
cleanly inside the YAML block. Same on-disk file content, no YAML
indentation conflict.
Replace the .zip artifact with a 7-Zip self-extracting .exe wrapper.
On launch, the wrapper extracts the Flutter Windows build tree to
%TEMP% and runs HashWallet.exe — user experience is one .exe to
download and double-click. Each launch re-extracts; subsequent launches
are slower than a real install but zero-touch portable is the user's
explicit preference over an installer.
SFX module probe handles 7-Zip naming variations (7zS.sfx / 7zSD.sfx /
7zSfx.sfx) so the step doesn't break across 7-Zip releases.
Replaced upstream Cake brand references in user-visible ARB *values*
(keys untouched, so generated S.current.<key> references still work):
- "Cake 2FA" → "Hash Bags 2FA"
- "Cake Pay" → "Hash Bags Pay" (still gated off via
FeatureFlag.isCakePayEnabled = false; rebranding the string so it
doesn't ship literal "Cake" copy if the flag ever flips)
- "Cake Wallet" → "Hash Bags"
- "Cake Labs" → "Such Software"
- "by Cake Pay" → "by Hash Bags Pay"
- "cakewallet.com" → "such.software"
English-only adjustments (other locales had their own translations):
- new_first_wallet_text "Keeping your crypto safe is a piece of
cake" → "Keeping your crypto safe shouldn't be hard" (drops the
Cake pun, which now reads odd post-rename)
- outdated_electrum_wallet_description + _receive_warning rewritten
to Hash-Bags-neutral phrasing: "Hash Bags now uses Electrum V2
wallets. Bitcoin wallets created in older builds need to be
replaced; receiving to old wallets may lose funds." Same Hash-Bags-
neutral rewrite propagated to all locales that had a translated
version of the original Cake-Electrum-V2 message.
Deliberately not touched:
- ARB *keys* (cake_2fa_preset, cake_pay_*, cakepay_*, disable_cake_2fa,
etc.) — keys must stay stable so generated S.current.x references
keep resolving.
- "Cupcake" / "cupcake" — a separate companion app referenced in
restore_*_from_cupcake strings, not part of the Cake brand we're
rebranding from.
- Internal Dart identifiers like CakeImageWidget class name.
Also fixed hardcoded titles in lib/src/screens/setup_2fa/setup_2fa.dart:
- Line 18: title 'Cake 2FA' → 'Hash Bags 2FA'
- Line 22: cake2FAGuideTitle 'Cake 2FA Guide' → 'Hash Bags 2FA Guide'
(Local variable name cake2FAGuideTitle kept as-is — it's a code
identifier, not user-visible.)
33 files touched: 31 ARBs (ar, bg, cs, de, en, es, fa, fr, gn, ha, hi,
hr, hy, id, it, ja, ko, my, nl, pl, pt, pt_BR, ru, th, tl, tr, uk, ur,
vi, yo, zh, zh_tw) + lib/src/screens/setup_2fa/setup_2fa.dart.
User flagged the Windows .exe icon as having the hash sign visually
biased toward the top. Root cause: the previous icon source SVG used
<text> with dominant-baseline="central" — the rasterizer fell back to
whatever monospaced font it found, and that font's # glyph isn't
positioned at the geometric center of its em-box (most monospaced
fonts have the # mark biased upward in their em-square).
Replace the text-rendered # with 4 vector <line> elements forming a
mathematically symmetric # centered at (512, 512) of the 1024 canvas.
No font dependency, deterministic across rasterizers.
Re-rendered:
- assets/images/app_logo.png — master 1024x1024 PNG
- windows/runner/resources/app_icon.ico — 7-size .ico (16..256)
- assets/images/cakewallet_android_icon/mipmap-*/ic_launcher.png
(5 densities, the legacy launcher PNG; CI symlinks from here)
NOT regenerated in this commit (follow-up):
- assets/images/cakewallet_android_icon/mipmap-*/ic_launcher_{foreground,background,monochrome}.png
(adaptive icons used on Android 8+ — need separate foreground/
background composition logic)
- assets/images/ios_icons/cakewallet_ios_icons/* (70 files)
- assets/images/macos_icons/cakewallet_macos_icons/* (7 files)
Cake Wallet → Hash Bags / Such Software LLC across the user-facing
platform configs:
- macos/Runner/InfoBase.plist: CFBundleDisplayName + CFBundleName
- windows/runner/main.cpp: top-level window title
- ios/Runner/InfoBase.plist: URL scheme cakewallet → hashbags,
CFBundleURLName y.at → com.suchsoftware.hashwallet
- android/app/src/main/AndroidManifestBase.xml: URL scheme
- scripts/windows/build_exe_installer.iss: full rebrand (name,
publisher, URL, exe name, AppId, DefaultDirName, output filename)
- assets/text/disclaimer_deuro.txt: legal disclaimer text
Version unification → 1.0.0 build 1 across all platforms:
- pubspec_description.yaml (was 0.0.0, description was "Cake Wallet.")
- scripts/android/app_env.sh (was 6.1.2 build 4410)
- scripts/ios/app_env.sh (was 6.1.2 build 418)
- scripts/macos/app_env.sh (was 6.1.0 build 147)
- scripts/windows/build_exe_installer.iss (was 6.1.0)
env.json (Windows) was already 1.0.0.
FAQ contact info → support@such.software / @such_software across all
13 locale faq_*.json files (was support@cakewallet.com /
@CakeWalletXMR / @cakewallet_bot).
Node lists:
- Delete assets/zano_node_list.yml — Zano not enabled in any
configure flag; file was dead code.
- Remove zcashDefaultNodeUri const from
lib/entities/default_settings_migration.dart — Zcash not in
product, const was unreferenced anywhere.
Note on BTC + LTC defaults: audit suggested these were Cake-by-default
but they were already non-Cake (blockstream and electrum-ltc.bysh.me).
Cake stays in the auto-switch pool — flagged for separate decision on
whether to disable auto-switching to Cake nodes for privacy.
Self-hosted Windows runner builds an unsigned Windows Release zip with
the Flutter .exe + bundled monero/wownero DLLs + MinGW runtime DLLs +
MSVC runtime DLLs. workflow_dispatch only — triggered from the Gitea
Actions UI.
Major design points hammered out during initial bring-up:
- Use explicit Git Bash path for `shell:` rather than `shell: bash`,
since act_runner under LocalSystem resolves bare `bash` to
C:\Windows\System32\bash.exe (WSL) which refuses to run as
LocalSystem.
- Configure git identity + safe.directory before any submodule ops,
since LocalSystem has no global git config and scripts/monero_c/
apply_patches.sh does git-commit-equivalents.
- Clone torch_dart + reown_flutter from git instead of tarball — the
upstream-published .tar.gz tarballs contain example-app
.plugin_symlinks with absolute /home/runner paths that Windows tar
refuses to extract.
- Fetch monero_c prebuilt release-bundle.zip (same one Android/iOS
use) and re-stage its x86_64-w64-mingw32 wallet DLLs into the
layout that windows/CMakeLists.txt expects:
scripts/monero_c/release/<coin>/x86_64-w64-mingw32_libwallet2_api_c.dll
CMake's install() rules RENAME them to <coin>_libwallet2_api_c.dll
in the Release dir.
- Mirror those wallet DLLs under their lib<coin>_wallet2_api_c.dll
Dart-FFI-expected names — package:monero's DynamicLibrary.open()
uses a different naming convention than windows/CMakeLists.txt's
RENAME rules.
- Source MinGW runtime DLLs (libssp-0.dll, libwinpthread-1.dll) from
Git for Windows' bundled mingw64/bin — has modern symbols including
pthread_cond_timedwait64 that monero_c requires. Flutter's bundled
mingit is too old (2017-vintage libwinpthread).
setup-windows-runner.ps1 (the one-shot toolchain installer for the
runner host) is gitignored — it's runner-side infra, not part of the
app.
* feat: Add memo support for swap
* fix: Error on swap page select receiver bottomsheet when picking receiveing currency that's not a wallet type
* feat: exclude providers that do not support memo when receive currency needs it, also show passed memo in confirmation and trade history sheets
* fix: overflow for destination tag on swap confirmation
* Update lib/view_model/exchange/exchange_view_model.dart [skip ci]
* Update lib/exchange/provider/trocador_exchange_provider.dart [skip ci]
---------
Co-authored-by: Omar Hatem <omarh.ismail1@gmail.com>
jwinterm