Add address capture deploy apply stage

README.md

@@ -62,6 +62,7 @@ python3 -m ampg --config gateway.toml apply --dry-run --profile vps-full
 python3 -m ampg --config gateway.toml deploy apply --stage state --dry-run --profile vps-full
 python3 -m ampg --config gateway.toml deploy apply --stage supervisor --dry-run --profile vps-full
 python3 -m ampg --config gateway.toml deploy apply --stage start --dry-run --profile vps-full
+python3 -m ampg --config gateway.toml deploy apply --stage addresses --dry-run --profile vps-full
 ```
 
 `init site` writes a readable `gateway.toml` with selected transports enabled and common
@@ -71,7 +72,8 @@ reachability hints. `apply --dry-run` prints the activation sequence and a prefl
 verdict without changing services. `deploy apply --stage state` copies approved
 managed-daemon config into AMPG-owned state. `deploy apply --stage supervisor` installs
 approved supervisor files after state exists. `deploy apply --stage start` starts
-AMPG-owned services after state and supervisor files are present.
+AMPG-owned services after state and supervisor files are present. `deploy apply --stage
+addresses` captures daemon-written public addresses into the address registry.
 
 ## Interaction tiers
 
@@ -141,6 +143,8 @@ python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage supe
 python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage supervisor --profile mobile-i2p --yes
 python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage start --dry-run --profile mobile-i2p
 python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage start --profile mobile-i2p --yes
+python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage addresses --dry-run --profile mobile-i2p
+python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage addresses --profile mobile-i2p --yes
 python3 -m ampg --config examples/wownero.gateway.toml build
 python3 -m ampg --config examples/wownero.gateway.toml build --profile tor-i2p
 python3 -m ampg --config examples/wownero.gateway.toml build --protocol tor --protocol i2p
@@ -174,8 +178,9 @@ platform supervisor files, but are not installed or started. Managed daemon conf
 runtime state at `gateway.state_dir`.
 
 Captured transport addresses are written under `gateway.state_dir` by
-`addresses capture` or `addresses set`. Fixture manifests and health plans use explicit
-config first, then captured addresses, then deterministic placeholders.
+`deploy apply --stage addresses`, `addresses capture`, or `addresses set`. Fixture
+manifests and health plans use explicit config first, then captured addresses, then
+deterministic placeholders.
 
 `approvals list` reports whether generated artifact digests are missing, stale,
 unapproved, or approved. `approvals approve` records reviewed digests under
@@ -204,6 +209,10 @@ requires `--yes`; it runs only structured platform commands for AMPG-named servi
 does not install packages, rewrite config, delete files, capture addresses, or run health
 checks.
 
+`deploy apply --stage addresses --dry-run` shows daemon-written public addresses that can
+be recorded. The live form requires `--yes`; it writes captured addresses to
+`gateway.state_dir` and leaves health verification for the next stage.
+
 `dns plan --free-domain-hints` prints optional community subdomain services that may help
 new users get a clearnet name without buying a domain. These are third-party registries;
 operators still need to review current terms, availability, content rules, and DNS
@@ -232,4 +241,5 @@ Explicit `--protocol` and `--platform` flags override the profile when present.
 - [ ] Run `ampg deploy apply --stage state --dry-run`; confirm approved state copies.
 - [ ] Run `ampg deploy apply --stage supervisor --dry-run`; confirm approved service files.
 - [ ] Run `ampg deploy apply --stage start --dry-run`; confirm service-manager commands.
+- [ ] Run `ampg deploy apply --stage addresses --dry-run`; confirm captured transport addresses.
 - [ ] Run live apply after the preflight gate is ready.

ampg/addresses.py

@@ -185,27 +185,41 @@ def _protocol_specific_configured_url(protocol: ProtocolConfig) -> Any:
     return None
 
 
-def capture_addresses(config: GatewayConfig) -> list[AddressCaptureResult]:
-    records = load_address_registry(config)
+def capture_address_results(config: GatewayConfig) -> list[AddressCaptureResult]:
     results: list[AddressCaptureResult] = []
-    changed = False
     for site in config.sites:
         for protocol in site.protocols.values():
             if not protocol.enabled:
                 continue
-            result = _capture_protocol_address(config, site, protocol)
-            results.append(result)
-            if result.status == "captured":
-                records[(site.id, protocol.name)] = AddressRecord(
-                    site_id=site.id,
-                    protocol=protocol.name,
+            results.append(_capture_protocol_address(config, site, protocol))
+    return results
+
+
+def write_captured_address_results(
+    config: GatewayConfig,
+    results: list[AddressCaptureResult],
+) -> Path | None:
+    records = load_address_registry(config)
+    changed = False
+    for result in results:
+        if result.status != "captured":
+            continue
+        records[(result.site_id, result.protocol)] = AddressRecord(
+            site_id=result.site_id,
+            protocol=result.protocol,
             url=result.url,
             address_status="captured",
             source=result.source,
         )
         changed = True
     if changed:
-        write_address_registry(config, records)
+        return write_address_registry(config, records)
+    return None
+
+
+def capture_addresses(config: GatewayConfig) -> list[AddressCaptureResult]:
+    results = capture_address_results(config)
+    write_captured_address_results(config, results)
     return results
 
 

ampg/apply.py

@@ -8,6 +8,11 @@ import shutil
 import shlex
 import subprocess
 
+from .addresses import (
+    AddressCaptureResult,
+    capture_address_results,
+    write_captured_address_results,
+)
 from .config import GatewayConfig
 from .install_plan import (
     InstallStateCopy,
@@ -70,6 +75,18 @@ class StartApplyResult:
     message: str
 
 
+@dataclass(frozen=True)
+class AddressApplyResult:
+    site_id: str
+    protocol: str
+    status: str
+    mode: str
+    url: str
+    source: str
+    path: Path | None
+    message: str
+
+
 CommandRunner = Callable[[tuple[str, ...]], CommandRunResult]
 
 
@@ -253,6 +270,17 @@ def apply_start(
     return results
 
 
+def apply_addresses(
+    config: GatewayConfig,
+    *,
+    dry_run: bool,
+) -> list[AddressApplyResult]:
+    captures = capture_address_results(config)
+    if not dry_run:
+        write_captured_address_results(config, captures)
+    return [_address_result(result, dry_run=dry_run) for result in captures]
+
+
 def _validate_state_copy(
     config: GatewayConfig,
     copy: InstallStateCopy,
@@ -452,6 +480,36 @@ def _validate_start_action(
     )
 
 
+def _address_result(
+    result: AddressCaptureResult,
+    *,
+    dry_run: bool,
+) -> AddressApplyResult:
+    if result.status == "captured":
+        status = "planned" if dry_run else "written"
+        message = (
+            "would record captured public transport address"
+            if dry_run
+            else "recorded captured public transport address"
+        )
+    elif result.status == "missing":
+        status = "blocked"
+        message = result.message
+    else:
+        status = "skipped"
+        message = result.message
+    return AddressApplyResult(
+        site_id=result.site_id,
+        protocol=result.protocol,
+        status=status,
+        mode="dry-run" if dry_run else "live",
+        url=result.url,
+        source=result.source,
+        path=result.path,
+        message=message,
+    )
+
+
 def _result(
     copy: InstallStateCopy,
     *,

ampg/cli.py

@@ -22,9 +22,11 @@ from .addresses import (
     set_address,
 )
 from .apply import (
+    AddressApplyResult,
     StateApplyResult,
     StartApplyResult,
     SupervisorApplyResult,
+    apply_addresses,
     apply_state,
     apply_start,
     apply_supervisor,
@@ -160,7 +162,7 @@ def main(argv: list[str] | None = None) -> int:
     _add_target_selection(deploy_apply_parser)
     deploy_apply_parser.add_argument(
         "--stage",
-        choices=("state", "supervisor", "start"),
+        choices=("state", "supervisor", "start", "addresses"),
         required=True,
         help="Deployment stage to apply.",
     )
@@ -642,6 +644,26 @@ def _cmd_deploy(config, args) -> int:
                 f"blocked={len(blocked)}"
             )
             return 1 if blocked else 0
+        if args.stage == "addresses":
+            results = apply_addresses(config, dry_run=args.dry_run)
+            for result in results:
+                _print_address_apply_result(result)
+            blocked = [result for result in results if result.status == "blocked"]
+            written = [result for result in results if result.status == "written"]
+            planned = [result for result in results if result.status == "planned"]
+            skipped = [result for result in results if result.status == "skipped"]
+            print(
+                "AMPG_DEPLOY_APPLY_SUMMARY "
+                f"stage=addresses "
+                f"mode={'dry-run' if args.dry_run else 'live'} "
+                f"results={len(results)} "
+                f"planned={len(planned)} "
+                f"written={len(written)} "
+                f"skipped={len(skipped)} "
+                f"blocked={len(blocked)} "
+                f"registry=\"{_quote(str(address_registry_path(config)))}\""
+            )
+            return 1 if blocked else 0
     return 1
 
 
@@ -1165,6 +1187,21 @@ def _print_start_apply_result(result: StartApplyResult) -> None:
     )
 
 
+def _print_address_apply_result(result: AddressApplyResult) -> None:
+    path = str(result.path) if result.path else "-"
+    print(
+        "AMPG_DEPLOY_ADDRESS "
+        f"site={result.site_id} "
+        f"protocol={result.protocol} "
+        f"mode={result.mode} "
+        f"status={result.status} "
+        f"url=\"{_quote(result.url)}\" "
+        f"source=\"{_quote(result.source)}\" "
+        f"path=\"{_quote(path)}\" "
+        f"message=\"{_quote(result.message)}\""
+    )
+
+
 def _print_dns_record(record: DNSRecordPlan) -> None:
     print(
         "AMPG_DNS_RECORD "

ampg/deploy.py

@@ -82,7 +82,6 @@ def deploy_plan(
             daemon_probe=daemon_probe,
         ),
         _artifact_step(config, command_context, platform_provider=platform_provider),
-        _address_step(config, command_context),
         _apply_preflight_step(
             config,
             command_context,
@@ -95,6 +94,7 @@ def deploy_plan(
             platform_provider=platform_provider,
             daemon_probe=daemon_probe,
         ),
+        _address_step(config, command_context),
     )
     status = _overall_status(steps)
     return DeployPlan(
@@ -273,7 +273,7 @@ def _address_step(config: GatewayConfig, commands: _CommandContext) -> DeploySte
         return DeployStep(
             "addresses",
             "review",
-            commands.command("addresses capture"),
+            commands.command("deploy apply --stage addresses --dry-run"),
             f"capture or set generated transport address(es): {names}",
         )
     return DeployStep("addresses", "ready", commands.command("addresses list"), "addresses are known")

docs/architecture.md

@@ -142,6 +142,10 @@ after the state files they reference exist. It does not start or reload services
 services after state and supervisor files exist. Address capture and health verification
 remain separate stages.
 
+`ampg deploy apply --stage addresses` records daemon-written public addresses after the
+transport has produced them. It writes only the AMPG address registry; health
+verification remains a separate stage.
+
 The dry-run command is intentionally stricter than `doctor`: missing generated output is
 blocked during activation, because AMPG must not point a transport at an unbuilt output
 root.

docs/daemon-management.md

@@ -62,6 +62,8 @@ python3 -m ampg --config gateway.toml deploy apply --stage supervisor --dry-run
 python3 -m ampg --config gateway.toml deploy apply --stage supervisor --profile mobile-i2p --yes
 python3 -m ampg --config gateway.toml deploy apply --stage start --dry-run --profile mobile-i2p
 python3 -m ampg --config gateway.toml deploy apply --stage start --profile mobile-i2p --yes
+python3 -m ampg --config gateway.toml deploy apply --stage addresses --dry-run --profile mobile-i2p
+python3 -m ampg --config gateway.toml deploy apply --stage addresses --profile mobile-i2p --yes
 python3 -m ampg --config gateway.toml doctor --platform android-termux
 ```
 
@@ -99,9 +101,9 @@ daemon-written addresses under `gateway.state_dir`.
 which paths are AMPG-owned, daemon-written, required, or sensitive.
 
 `addresses list` prints the effective public address for each enabled protocol:
-configured, captured, derived, or placeholder. `addresses capture` reads daemon-written
-address files from AMPG state or a protocol `address_file` override, then updates the
-address registry under `state_dir`.
+configured, captured, derived, or placeholder. `deploy apply --stage addresses` and
+`addresses capture` read daemon-written address files from AMPG state or a protocol
+`address_file` override, then update the address registry under `state_dir`.
 
 `health-plan` prints fixture-based checks to run after services start. Published checks
 target real transport URLs; preview checks target local loopback preview endpoints.
@@ -139,6 +141,11 @@ requires both state and supervisor files to exist, and runs only structured plat
 commands for AMPG-named services. It does not install packages, rewrite config, remove
 files, capture addresses, or run health checks.
 
+`deploy apply --stage addresses` is the fourth live apply stage. Dry-run mode prints
+`AMPG_DEPLOY_ADDRESS` rows for configured, skipped, missing, and capturable addresses.
+Live mode requires `--yes` and writes captured transport addresses under
+`gateway.state_dir`. It does not rewrite daemon config or run health checks.
+
 `--protocol` scopes operational commands to selected enabled protocols. A clearnet
 `adopt` failure will block a full activation run, but it will not block
 `apply --dry-run --protocol i2p` because clearnet is outside that selected run.

docs/fixture-manifests.md

@@ -33,6 +33,7 @@ or deployment notes.
 python3 -m ampg --config examples/wownero.gateway.toml build
 python3 -m ampg --config examples/wownero.gateway.toml manifest
 python3 -m ampg --config examples/wownero.gateway.toml addresses list
+python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage addresses --dry-run --profile mobile-i2p
 python3 -m ampg --config examples/wownero.gateway.toml addresses capture --profile mobile-i2p
 python3 -m ampg --config examples/wownero.gateway.toml preview manifest
 python3 -m ampg --config examples/wownero.gateway.toml health-plan
@@ -62,10 +63,11 @@ Some transports may not have final public addresses when a fixture is generated.
 cases AMPG uses route-valid placeholders such as `http://wownero.onion/` so AMPB can still
 verify transport selection without contacting the network.
 
-When a managed or adopted daemon writes an actual address, run `addresses capture`.
-Captured addresses are stored under `gateway.state_dir` and replace placeholders in
-fixture manifests and published health plans. Operators can also use `addresses set` to
-store an address manually.
+When a managed or adopted daemon writes an actual address, run
+`deploy apply --stage addresses --dry-run` before recording it. Captured addresses are
+stored under `gateway.state_dir` and replace placeholders in fixture manifests and
+published health plans. Operators can also use `addresses capture` for a direct write or
+`addresses set` to store an address manually.
 
 ## Interaction Policy
 

docs/state-contract.md

@@ -61,3 +61,7 @@ explicit stage.
 `deploy apply --stage start` runs the service-manager start commands for AMPG-named
 services only after required state and supervisor files exist. It does not write or
 delete state files.
+
+`deploy apply --stage addresses` reads daemon-written address files from the state
+contract and writes captured public addresses to `addresses.json` under
+`gateway.state_dir`.

docs/wownero-integration.md

@@ -141,8 +141,8 @@ daemon_policy = "auto"
 - `ampg build` writes a fixture manifest that AMPB can check.
 - `ampg preview manifest` writes loopback fixture URLs that AMPB can check before live
   transport daemons are installed or adopted.
-- `ampg deploy apply --stage state`, `--stage supervisor`, and `--stage start` stage
-  Wownero transport services without mixing config writes and service start.
+- `ampg deploy apply --stage state`, `--stage supervisor`, `--stage start`, and
+  `--stage addresses` stage Wownero transport publication without mixing concerns.
 - Tor output contains no `<script>` tags or inline event handlers.
 - Generated Gemini output has readable headings, paragraphs, and links.
 - Generated Micron output fits terminal-first browsing.
@@ -167,6 +167,7 @@ python3 -m ampg --config examples/wownero.gateway.toml approvals approve --profi
 python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage state --dry-run --profile mobile-i2p
 python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage supervisor --dry-run --profile mobile-i2p
 python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage start --dry-run --profile mobile-i2p
+python3 -m ampg --config examples/wownero.gateway.toml deploy apply --stage addresses --dry-run --profile mobile-i2p
 python3 -m ampg --config examples/i2p-only.gateway.toml plan
 python3 -m ampg --config examples/i2p-only.gateway.toml build
 ```
@@ -180,3 +181,4 @@ python3 -m ampg --config examples/i2p-only.gateway.toml build
 - [ ] Add Reticulum/Micron conversion fixtures.
 - [ ] Enable I2P and Reticulum daemon management only after static outputs are stable.
 - [ ] Start only AMPG-owned Wownero transport services after reviewed files are applied.
+- [ ] Capture Wownero transport addresses before published health checks.

tests/test_deploy_apply.py

@@ -4,6 +4,7 @@ import tempfile
 import unittest
 from pathlib import Path
 
+from ampg.addresses import address_registry_path
 from ampg.apply import CommandRunResult, apply_start, apply_state, apply_supervisor
 from ampg.cli import main
 from ampg.config import load_config
@@ -148,6 +149,13 @@ def _run_termux_supervisor_apply(config_path: Path, root: Path) -> None:
         raise AssertionError(blocked[0].message)
 
 
+def _write_i2p_address_file(root: Path, value: str = "captureexample.b32.i2p") -> Path:
+    path = root / ".ampg/state/example/i2p/b32.txt"
+    path.parent.mkdir(parents=True, exist_ok=True)
+    path.write_text(value + "\n", encoding="utf-8")
+    return path
+
+
 class DeployApplyTest(unittest.TestCase):
     def test_deploy_apply_state_blocks_unapproved_artifacts(self):
         with tempfile.TemporaryDirectory() as tmp:
@@ -479,6 +487,85 @@ class DeployApplyTest(unittest.TestCase):
         self.assertIn(("sv-enable", "ampg-example-i2p-i2pd"), commands)
         self.assertIn(("sv-enable", "ampg-example-i2p-nginx-loopback"), commands)
 
+    def test_deploy_apply_addresses_blocks_when_address_is_missing(self):
+        with tempfile.TemporaryDirectory() as tmp:
+            root = Path(tmp).resolve()
+            config_path = _init_i2p_config(root)
+
+            status, output, error = _run_cli(
+                [
+                    "--config",
+                    str(config_path),
+                    "deploy",
+                    "apply",
+                    "--stage",
+                    "addresses",
+                    "--dry-run",
+                    "--profile",
+                    "mobile-i2p",
+                ]
+            )
+
+        self.assertEqual(1, status)
+        self.assertEqual("", error)
+        self.assertIn("AMPG_DEPLOY_ADDRESS", output)
+        self.assertIn("status=blocked", output)
+        self.assertIn("no address file found", output)
+
+    def test_deploy_apply_addresses_dry_run_does_not_write_registry(self):
+        with tempfile.TemporaryDirectory() as tmp:
+            root = Path(tmp).resolve()
+            config_path = _init_i2p_config(root)
+            _write_i2p_address_file(root)
+            config = load_config(config_path)
+
+            status, output, error = _run_cli(
+                [
+                    "--config",
+                    str(config_path),
+                    "deploy",
+                    "apply",
+                    "--stage",
+                    "addresses",
+                    "--dry-run",
+                    "--profile",
+                    "mobile-i2p",
+                ]
+            )
+            registry_exists = address_registry_path(config).exists()
+
+        self.assertEqual(0, status, error)
+        self.assertIn("AMPG_DEPLOY_ADDRESS", output)
+        self.assertIn("status=planned", output)
+        self.assertIn("http://captureexample.b32.i2p/", output)
+        self.assertFalse(registry_exists)
+
+    def test_deploy_apply_addresses_live_writes_registry(self):
+        with tempfile.TemporaryDirectory() as tmp:
+            root = Path(tmp).resolve()
+            config_path = _init_i2p_config(root)
+            _write_i2p_address_file(root)
+            config = load_config(config_path)
+
+            status, output, error = _run_cli(
+                [
+                    "--config",
+                    str(config_path),
+                    "deploy",
+                    "apply",
+                    "--stage",
+                    "addresses",
+                    "--profile",
+                    "mobile-i2p",
+                    "--yes",
+                ]
+            )
+            registry_text = address_registry_path(config).read_text(encoding="utf-8")
+
+        self.assertEqual(0, status, error)
+        self.assertIn("status=written", output)
+        self.assertIn("http://captureexample.b32.i2p/", registry_text)
+
 
 if __name__ == "__main__":
     unittest.main()

tests/test_deploy_plan.py

@@ -63,6 +63,7 @@ class DeployPlanTest(unittest.TestCase):
         self.assertIn("AMPG_DEPLOY_STEP stage=artifacts status=todo", output)
         self.assertIn("AMPG_DEPLOY_NEXT step=1 stage=build", output)
         self.assertIn("build --profile mobile-i2p", output)
+        self.assertIn("deploy apply --stage addresses --dry-run --profile mobile-i2p", output)
 
     def test_deploy_plan_shows_dns_review_for_clearnet_site(self):
         with tempfile.TemporaryDirectory() as tmp: